Reverse atom transfer radical polymerization of vinyl monomers with Fe[SC(S)NEt2]3 alone as the catalyst

The living radical polymerization of methyl methacrylate and styrene was successfully carried out with diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS)/ferric tri(diethyldithiocarbamate) as a novel reverse atom transfer radical polymerization initiation system in which DCDPS was a hexa‐substituted ethane‐type thermal iniferter, DC was a diethyldithiocarbamate group, and no additional ligands such as nitrogen‐ or phosphine‐based compounds were required. The bulk polymerization of methyl methacrylate was carried out at 95 °C, and that of styrene was carried out at 120 °C. Poly(methyl methacrylate) and polystyrene (PSt) with high molecular weights and quite narrow molecular weight distributions (as low as 1.09 for PSt) were obtained. ¹H NMR spectroscopy revealed the presence of an α‐(carbethoxycyanophenyl)methyl group from the initiator and an ω‐DC group from the catalyst in the obtained polymers. Various chain‐extension reactions under UV light or thermal treatments were successfully conducted to prove the presence and efficient reinitiating of the ω‐DC group. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3464–3473, 2001     

Atom Transfer Radical Polymerization of Styrene with 5‐Chloromethyl‐2‐hydroxy‐benzaldehyde as Initiator

Abstract

Atom transfer radical polymerization (ATRP) of styrene (St) proceeded using 5‐chloromethyl‐2‐hydroxy‐benzaldehyde as initiator, CuCl as catalyst, and N,N,N′,N′,N′‐pentamethyldiethyltriamine (PMDETA) as ligand. The results show that the polymerization is a first order reaction with respect to monomer concentration. The polymerization displayed living character as evidenced by a liner increase of monomer weight with conversation and a relatively narrow distribution (M _n/M _w ranges from 1.25 to 1.50). The end structure of PSt was analyzed by ¹H‐NMR, and PSt initiated MMA to form block copolymer (PSt‐b‐PMMA), which also proved that the polymerization could be controlled. The effects of reaction temperature and monomer to initiator mole ratio on the polymerization displayed living character were discussed.     

A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

“LIVING”/CONTROLLED RADICAL POLYMERIZATION OF ETHYL METHYLACRYLATE WITH 2,2’-AZOBISISOBUTYRONITRILE/FERRIC CHLORIDE/TRIPHENYLPHOSPHINE INITIATION SYSTEM

"Living"/controlled radical polymerization of ethyl methacrylate (EMA) was carried out with a 2,2'-azobisisobutyronitrile (AIBN)/ferric chloride (FeCl_3)/triphenylphosphine (PPh_3) initiation system at 85℃. Thc numberaverage molecular weight (M_n) increases linearly with monomer conversion and the rate of polymerization is first order withrespect to monomer concentration. The M_w of PEMA ranges from 3900 to 17600 and the polydispersity indices are quitenarrow (1.09～1.22). The conversion can reach up to～100% and M_w of the polymers obtained is close to that designed. Thepolymerization mechanism belongs to the reverse atom transfer radical polymerization (ATRP). The polymer was end-functionalized by chlorine atom, which acts as a macroinitiator to proceed extension polymerization in the presence ofCuBr/bipy catalyst system via an ATRP process. The presence of ω-chlorine in the PEMA obtained was identified by ~1H-NMR spectrum.     

Synthesis and Characterization of Poly(methyl methacrylate)-b-Polystyrene/TiO2 Nanocomposites Via Reversible Addition-Fragmentation Chain Transfer Polymerization

A diblock copolymer, poly(methyl methacrylate)-b-polystyrene (PMMA-b-PS), was grafted onto the surface of nano-titania (nano-TiO₂) successfully via reversible addition-fragmentation chain transfer (RAFT) polymerization. The surface of TiO₂ nanoparticles was modified initially by attaching dithioester groups to the surface using silane coupling agent 3-(chloropropyl)triethoxy silane and sodium ethyl xanthate. The polymerization of methyl methacrylate and styrene were then initiated and propagated on the TiO₂ surface by RAFT polymerization. The resulting composite nanoparticles were characterized by means of XPS, FT-IR, ¹H NMR and TGA. The results confirmed the successful grafting of poly(methyl methacrylate) (PMMA) and diblock copolymer chains onto the surface of TiO₂. The amount of PMMA grafted onto the TiO₂ surface increased with the polymerization time. Moreover, the kinetic studies revealed that the ln([M]₀/[M]), where [M]₀ is the initial and [M] is the time dependent monomer concentrations, increased linearly with the polymerization time, indicating the living characteristics of the RAFT polymerization.     

Living free-radical copolymerization of allyl glycidyl ether with methyl acrylate

An investigation of the copolymerization of allyl glycidyl ether (AGE) with methyl acrylate (MA) was performed in the presence of benzyl imidazole-1-carbodithioate (BICDT) on the thermal initiation condition. Results showed that the process has good characteristics of living free radical polymerization, i.e. the molecular weight of the obtained polymer increases linearly with monomer conversion, molecular weight distribution is very narrow, and a linear relationship between ln([M]₀/[M]) and polymerization time is found. The copolymer structure containing epoxy groups was demonstrated from the ¹H nuclear magnetic resonance (1H NMR) spectrum. It was found that the content of AGE in the copolymer increases with the increase in monomer conversion and molar faction of the AGE in the monomer feed. However, the polymerization could slow down when the fraction of AGE increases in the monomer feed. Taking advantage of living polymerization character, functional block copolymers PSt-b-P (MA-co-AGE) were prepared in the presence of PSt RAFT agent. __________ Translated from Journal of Anhui University of Science and Technology, 2006, 26(3): 56–61 [译自: 安徽理工大学学报]     

镍体系(NiCl_2/PPh_3)催化的反向原子转移自由基聚合

以 2 ,3 二氰基 2 ,3 二苯基丁二酸二乙酯 (DCDPS) NiCl2 PPh3 为引发体系 ,首次利用Ni2 + 和Ni+ 之间的变价关系 ,研究了乙烯基单体的反向ATRP .结果表明 ,苯乙烯 (St)的聚合具有活性自由基聚合的特征 ,所得PSt的分子量随转化率的增加而增加 ,并且制得的PSt可以作为大分子引发剂进行扩链反应 .但该引发体系引发甲基丙烯酸甲酯 (MMA)聚合时没有活性自由基聚合特征 ,PMMA的分子量与转化率基本无关 ,但分子量分布窄Mw Mn=1 19     

Synthesis of polystyrene with high melting temperature through BDE/CuCl catalyzed polymerization

No matter what the polymerization manner was, polystyrene with unique highT _m (T _m = 170–285°C) was obtained through polymerization of styrene if the amount of BDE/CuCl catalyst was highly increased (mol ratio: St:CuCl = 25:1-2.5:1). Partial crystallinity of the PSt was observed by characterizations of X-ray diffraction and DSC. Spectra of¹H-NMR and¹³C-NMR showed that syndiotactic structure contained in the obtained PSt was 5% more than that in aPSt (atactic polystyrene). According to the proposed “coordinated radical cage” mechanism, the coordinated state between radical and catalyst center metal Cu should be more closely packed with increasing the BDE/CuCl catalyst amount, which was induced to partial stereospecific polymerization in the coordinated radical polymerization of St.     

High‐Speed Living Polymerization of Polar Vinyl Monomers by Self‐Healing Silylium Catalysts

This contribution describes the development and demonstration of the ambient‐temperature, high‐speed living polymerization of polar vinyl monomers (M) with a low silylium catalyst loading (≤ 0.05 mol % relative to M). The catalyst is generated in situ by protonation of a trialkylsilyl ketene acetal (^RSKA) initiator (I) with a strong Brønsted acid. The living character of the polymerization system has been demonstrated by several key lines of evidence, including the observed linear growth of the chain length as a function of monomer conversion at a given [M]/[I] ratio, near‐precise polymer number‐average molecular weight (M_n, controlled by the [M]/[I] ratio) with narrow molecular weight distributions (MWD), absence of an induction period and chain‐termination reactions (as revealed by kinetics), readily achievable chain extension, and the successful synthesis of well‐defined block copolymers. Fundamental steps of activation, initiation, propagation, and catalyst “self‐repair” involved in this living polymerization system have been elucidated, chiefly featuring a propagation “catalysis” cycle consisting of a rate‐limiting C? C bond formation step and fast release of the silylium catalyst to the incoming monomer. Effects of acid activator, catalyst and monomer structure, and reaction temperature on polymerization characteristics have also been examined. Among the three strong acids incorporating a weakly coordinating borate or a chiral disulfonimide anion, the oxonium acid [H(Et₂O)₂]⁺[B(C₆F₅)₄]^? is the most effective activator, which spontaneously delivers the most active R₃Si⁺, reaching a high catalyst turn‐over frequency (TOF) of 6.0×10³ h^?1 for methyl methacrylate polymerization by Me₃Si⁺ or an exceptionally high TOF of 2.4×10⁵ h^?1 for n‐butyl acrylate polymerization by iBu₃Si⁺, in addition to its high (>90 %) to quantitative efficiencies and a high degree of control over M_n and MWD (1.07–1.12). An intriguing catalyst “self‐repair” feature has also been demonstrated for the current living polymerization system.     

Living/controlled radical polymerization of styrene with a new initiating system: DCDPS/FeCl3/PPh3

The living/controlled radical polymerization of styrene was investigated with a new initiating system, DCDPS/FeCl₃/PPh₃, in which diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS) was a hexa‐substituted ethane thermal iniferter. The polymerization mechanism belonged to a reverse atom transfer radical polymerization (ATRP) process. The polymerization was controlled closely in bulk (at 100 °C) or in solution (at 110 °C) with a high molecular weight and quite narrow polydispersity (M_w/M_n = 1.18 ∼ 1.28). End‐group analysis results by ¹H NMR spectroscopy showed that the polymer was ω‐functionalized by a chlorine atom, which also was confirmed by the result of a chain‐extension reaction in the presence of a FeCl₂/PPh₃ or CuCl/bipy (2,2′‐bipyridine) catalyst via a conventional ATRP process. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 101–107, 2000     

Effect of Cu(II)/H2 Salen complex on the non-conventional initiated emulsion polymerization of acrylonitrile

Radical polymerization of acrylonitrile was carried out in an emulsifier-free condition initiated by KHSO₅ catalyzed with Cu(II)/bis-salicylidene ethylene diamine (H₂ Salen) complex. The Cu(II) salt alone, Cu(II)/salicylaldehyde and Cu(II)/ethylene diamine have a retarding effect on the polymerization reaction, while the chelate of Cu(II) with the tetradentate Schiff base ligand, H₂ Salen has a catalytic effect. Prior to this, the catalytic effect of various bivalent transition metal salts and their couple with the Schiff base, H₂ Salen on the polymerization reaction has been examined to be not significant. The in situ developed complex produces the stable emulsion leading to high conversion. In the polymerization, the variables studied were the concentration of monomer, initiator, Cu(II), H₂ Salen and temperature. The overall activation energy was computed to be 13.1 kcal/mol. From the kinetic and spectral analyses, the mechanism of the initiator decomposition and initiation of polymerization by Cu(II)/H₂ Salen complex were suggested. The rate of polymerization (R_p) was found to be dependent on the monomer, initiator, Cu(II) ion, H₂ Salen concentrations to the 1.4, 0.3, 1.6, 1.5 power respectively. The polymers are characterized by IR and molecular weight by viscosity and GPC methods.     

A Green One-pot Synthesis of PDMS Bis-Macromonomers Using an Ecologic Catalyst (Maghnite-H+)

PDMS bis-macromonomers bearing methyl methacrylate end groups is a material mainly used for making extended-wear contact lenses. Silicon-based materials give a good oxygen passage and methyl methacrylate has biocompatibility and mechanical properties of the elastomer. The present study shows the synthesis of this material. The polymerization of hexamethylcyclotrisiloxane (D₃) catalyzed by Maghnite-H⁺ (Mag-H⁺), a montmorillonite sheet silicate clay exchanged with protons, an efficient catalyst for cationic polymerization of manyheterocyclic and vinylicmonomers. The structural compositions of “Maghnite” have already been determined. The effects of the amount of Mag-H⁺, temperature and the reaction time were studied. Moreover, we used a simple method, one step in solution to prepare Poly dimethyl siloxane (PDMS) and PDMS bis-macromonomers. The structure of the resulting products is characterized and established by ¹H and ¹³C-NMR, where the methacrylate end groups are clearly visible. The presence of unsaturated end group was also determined by UV and FTIR analysis. The influence of the amount of methacrylic anhydride on monomer conversion was studied. The polymerization yield and the molecular weight of PDMS macromonomers depend on the amount of methacrylic anhydride used.     

Cyclodextrins in polymer synthesis: polymerization of methyl methacrylate under atom‐transfer conditions (ATRP) in aqueous solution

Host guest complexes of methyl methacrylate (MMA) and randomly methylated β‐cyclodextrin (m‐β‐CD, 1 a ) were polymerized in aqueous medium using atom‐transfer radical polymerization. Ethyl 2‐bromoisobutyrate (EBIB) was used as an initiator, copper(I) bromide as the catalyst, and bipyridine (bipy) or 4,4′‐di‐(5‐nonyl)‐2,2´‐bipyridine (dNbipy) as ligands. The unthreading of m‐β‐CD during the polymerization led to water‐insoluble poly(methyl methacrylate) (PMMA). It was found that using dNbipy resulted in higher monomer conversion than using bipy as the ligand under similar conditions. Furthermore, it is shown that the polymerization of MMA under these conditions has a living character. The polymers obtained have a much lower polydispersity than those obtained from conventional free‐radical polymerization. Also, the block copolymerization of PMMA bearing a bromoester end group with CD‐complexed styrene ( 2 a ) was carried out under ATRP conditions in aqueous medium.     

磁性Co/TiB2室温高效催化氨硼烷产氢及串联降解有机污染物

通过熔盐法制备TiB₂载体,并采用简单的沉淀-沉积法制备了Co/TiB₂磁性可回收纳米催化剂,用于室温催化氨硼烷（NH₃BH₃）溶液产氢及串联降解对硝基苯酚（4-NP）及偶氮染料酸性橙7（AO7）、酸性红1（AR1）和甲基橙（MO）等有机污染物。采用X射线衍射、扫描电子显微镜、透射电子显微镜、X射线光电子能谱、振动样品磁强计等表征方法对催化剂的微观形貌和结构等进行分析。结果表明,Co纳米粒子均匀地分布在TiB₂载体表面,晶粒尺寸约为40 nm,并且被TiB₂载体包覆,具有典型的金属-载体强相互作用。Co/TiB₂表现出优异的室温催化NH₃BH₃溶液产氢活性,产氢速率为565.8 mol_H2·mol_cat^-1·h^-1。在串联降解有机污染物反应中,Co/TiB₂在7 min内催化4-NP氨基化的转化率接近100%,反应速率常数高达0.72 min^-1;降解AO7的反应速率常数在3种偶氮染料中最高（0.34 min^-1）。通过EPR-DMPO（EPR=电子顺磁共振,DMPO=5,5-二甲基-1-吡咯啉-N-氧化物）自由基捕获实验检测出Co/TiB₂+NH₃BH₃催化体系中产生大量的氢自由基（·H）。得益于·H的强还原性,Co/TiB₂+NH₃BH₃催化体系能够将4-NP氨基化为具有更高价值的对氨基苯酚（4-AP）,同时能够还原偶氮染料分子中的显色基团偶氮基（—N=N—）。     

Styrene polymerization with rare earth catalysts using a magnesium alkyl cocatalyst

A new highly active rare earth coordination catalyst composed of rare earth phosphonate, di-n-butylmagnesium (MgBu), and hexamethyl phosphoramide (HMPA) for the polymerization of styrene has been developed for the first time. High molecular weight polystyrene (M̄_ν = 50–70 × 10⁴) in 100% conversion could be prepared at following conditions: [Nd] = 6–8 × 10⁻⁴ mol/L, [St] = 3.0 mol/L, Mg/Nd = 11, and HMPA/Mg = 1–1.5 (molar ratio). The catalytic activity of this new catalyst is 3530 g PSt/g Nd. Kinetics study shows that the polymerization rate is of first order with respect to both monomer concentration and catalyst concentration, and activation energy of the polymerization is 40.1 kJ/mol. © 1996 John Wiley & Sons, Inc.     

含有热引发转移终止剂的引发体系在反向原子转移自由基聚合中的应用

原子转移自由基聚合 (ATRP)是实现活性聚合的一种颇为有效的途径 ,可以实现多种单体的活性自由基聚合 .反向原子转移自由基聚合 (ReverseATRP)的概念始提出于 1995年 ,是对传统ATRP的改进和拓展 .近年来关于此体系的引发剂的拓展、过渡金属及单体的适用性都得到了很大发展 .本文简要综述了我们研究组在反向原子转移自由基聚合方面的研究进展     

Cationic polymerization of vinyl monomers initiated by 10-methylphenothiazine cation radicals

A small quantity of 10-methylphenothiazine cation radical (MPT^.+), electrochemically prepared and stocked in acetonitrile solution, initiated cationic polymerizations of n-butyl, t-butyl, and 2-methoxyethyl vinyl ethers and p-methoxystyrene, while no initiation occurred for phenyl vinyl ether, styrene, methyl methacrylate, and phenyl glycidyl ether. ¹H-NMR studies of oligomers and low molecular weight compounds isolated from the reaction mixture for the polymerization of t-butyl vinyl ether in the presence of a small amount of D₂O indicated that electron transfer from the monomer to MPT^.+ was involved in the initiation step. ¹H- and ¹³C-NMR and MO calculation implied that monomers with higher electron densities on the vinyl groups and with lower ionization potentials were more susceptible to the initiation of MPT^.+. © 1994 John Wiley & Sons, Inc.     

Vinyl polymerization. 416. Polymerization of vinyl monomer initiated by polyethyleneglycol

The polymerization of vinyl monomer initiated by polyethyleneglycol (PEG) in aqueous solution was carried out at 85°C with shaking. Acrylonitrile (AN), methyl methacrylate (MMA), and methacrylic acid were polymerized by PEG–300 (M?_n = 300), whereas styrene was not. The effects of the amounts of monomer and PEG, the molecular weight of PEG, and the hydrophobic group at the end of PEG molecule on the polymerization were studied. The selectivity of vinyl monomer and the effect of the hydrophobic group are discussed according to “the concept of hard and soft hydrophobic areas and monomers.” The kinetics of the polymerization was investigated. The overall activation energy in the polymerization of AN was estimated as 37.9 kJ mol^?1. The polymerization was effected by a radical mechanism.     

Polymer-supported Ziegler–Natta catalyst for the polymerization of isoprene

A polymer-supported Ziegler–Natta catalyst, polystyrene-TiCl₄AlEt₂Cl (PS–TiCl₄AlEt₂Cl), was synthesized by reaction of polystyrene–TiCl₄ complex (PS–TiCl₄) with AlEt₂Cl. This catalyst showed the same, or lightly greater catalytic activity to the unsupported Ziegler–Natta catalyst for polymerization of isoprene. It also has much greater storability, and can be reused and regenerated. Its overall catalytic yield for isoprene polymerization is ca. 20 kg polyisoprene/gTi. The polymerization rate depends on catalyst titanium concentration, mole ratio of Al/Ti, monomer concentration, and temperature. The kinetic equation of this polymerization is: R_p = k[M]^0.30[Ti]^0.41[Al]^1.28, and the apparent activation energy ΔE_act = 14.5 kJ/Mol, and the frequency factor A_p = 33 L/(mol s). The mechanism of the isoprene polymerization catalyzed by the polymer-supported catalyst is also described. © 1993 John Wiley & Sons, Inc.     

新引发体系引发MMA活性自由基聚合

近年来 ,关于活性自由基聚合的研究极为活跃 ,已经发现了多种基于增长链自由基被可逆钝化形成休眠种的活性自由基聚合方法[1,2 ] .它们主要包括引发转移终止剂 ( Iniferter) ,稳定自由基聚合( SFRP) ,原子转移自由基聚合 ( ATRP) ,可逆加成 -断链链转移聚合 ( RAFT)等 .其中 ATRP因其具有可聚合单体多 ,反应条件相对缓和等优点而成为该领域的研究热点 [3～ 5] .ATRP活性自由基聚合的实现主要是在过渡金属催化剂的作用下 ,通过循环往复的碳 -卤键的活化、加成、碳 -卤键的再形成而得到最终活性的聚合物 ,引发体系由引发剂、过渡金属…