The Molecular Composition of Soot

Soot (sometimes referred to as black carbon) is produced when hydrocarbon fuels are burned. Our hypothesis is that polynuclear aromatic hydrocarbon (PAH) molecules are the dominant component of soot, with individual PAH molecules forming ordered stacks that agglomerate into primary particles (PP). Here we show that the PAH composition of soot can be exactly determined and spatially resolved by low-fluence laser desorption ionization, coupled with high-resolution mass spectrometry imaging. This analysis revealed that PAHs of 239–838 Da, containing few oxygenated species, comprise the soot observed in an ethylene diffusion flame. As informed by chemical graph theory (CGT), the vast majority of species observed in the sampled particulate matter may be described as benzenoids, consisting of only fused 6-membered rings. Within that limit, there is clear evidence for the presence of radical PAH in the particulate samples. Further, for benzenoid structures the observed empirical formulae limit the observed isomers to those which are nearly circular with high aromatic conjugation lengths for a given aromatic ring count. These results stand in contrast to recent reports that suggest higher aliphatic composition of primary particles.     

The Molecular Composition of Soot

Soot (sometimes referred to as black carbon) is produced when hydrocarbon fuels are burned. Our hypothesis is that polynuclear aromatic hydrocarbon (PAH) molecules are the dominant component of soot, with individual PAH molecules forming ordered stacks that agglomerate into primary particles (PP). Here we show that the PAH composition of soot can be exactly determined and spatially resolved by low‐fluence laser desorption ionization, coupled with high‐resolution mass spectrometry imaging. This analysis revealed that PAHs of 239–838 Da, containing few oxygenated species, comprise the soot observed in an ethylene diffusion flame. As informed by chemical graph theory (CGT), the vast majority of species observed in the sampled particulate matter may be described as benzenoids, consisting of only fused 6‐membered rings. Within that limit, there is clear evidence for the presence of radical PAH in the particulate samples. Further, for benzenoid structures the observed empirical formulae limit the observed isomers to those which are nearly circular with high aromatic conjugation lengths for a given aromatic ring count. These results stand in contrast to recent reports that suggest higher aliphatic composition of primary particles.     

Micro-FTIR study of soot chemical composition-evidence of aliphatic hydrocarbons on nascent soot surfaces

Previous studies suggest that soot formed in premixed flat flames can contain a substantial amount of aliphatic compounds. Presence of these compounds may affect the kinetics of soot mass growth and oxidation in a way that is currently not understood. Using an infrared spectrometer coupled to a microscope (micro-FTIR), we examined the composition of soot sampled from a set of ethylene-argon-oxygen flames recently characterized (A. D. Abid, et al. Combust. Flame, 2008, 154, 775-788), all with an equivalence ratio Φ=2.07 but varying in maximum flame temperatures. Soot was sampled at three distances above the burner surface using a probe sampling technique and deposited on silicon nitride thin film substrates using a cascade impactor. Spectra were taken and analyses performed for samples collected on the lowest five impactor stages with the cut-off sizes of D(50)=10, 18, 32, 56 and 100 nm. The micro-FTIR spectra revealed the presence of aliphatic C–H, aromatic C–H and various oxygenated functional groups, including carbonyl (C=O), C–O–C and C–OH groups. Spectral analyses were made to examine variations of these functional groups with flame temperature, sampling position and particle size. Results indicate that increases in flame temperature leads to higher contents of non-aromatic functionalities. Functional group concentrations were found to be ordered as follows: [C=O]<[C–O]<[aliphatic C–H]. Aliphatic C–H was found to exist in significant quantities, with very little oxygenated groups present. The ratio of these chemical functionalities to aromatic C–H remains constant for particle sizes spanning 10-100 nm. The results confirm a previous experimental finding: a significant amount of aliphatic compounds is present in nascent soot formed in the flames studied, especially towards larger distances above the burner surface.     

Lattice frequencies of a single crystal of benzylidenemalononitrile

Far i.r. and the Raman spectra of benzylidenemalononitrile have been recorded at room and liquid nitrogen temperatures. Lattice frequencies are calculated using an intermolecular potential of the atom-atom type, involving interactions between all pairs of atoms on neighboring molecules. The experimental frequencies are compared with those calculated.     

Molecular dynamics simulation study of water adsorption on hydroxylated graphite surfaces

In this paper, we present results from molecular dynamic simulations devoted to the characterization of the interaction between water molecules and hydroxylated graphite surfaces considered as models for surfaces of soot emitted by aircraft. The hydroxylated graphite surfaces are modeled by anchoring several OH groups on an infinite graphite plane. The molecular dynamics simulations are based on a classical potential issued from quantum chemical calculations. They are performed at three temperatures (100, 200, and 250 K) to provide a view of the structure and dynamics of water clusters on the model soot surface. These simulations show that the water-OH sites interaction is quite weak compared to the water-water interaction. This leads to the clustering of the water molecules above the surface, and the corresponding water aggregate can only be trapped by the OH sites when the temperature is sufficiently low, or when the density of OH sites is sufficiently high.     

Intermolecular interactions of H2S with rare gases from molecular beam scattering in the glory regime and from ab initio calculations

Integral cross sections for collisions of rotationally hot H2S molecules with rare gas atoms (Ne, Ar, and Kr) have been measured, in the collision energy range of 10-60 kJ mol(-1), using a molecular beam apparatus operating under high resolution both in angle and in velocity. A well resolved glory pattern has been measured which permitted the accurate characterization of the intermolecular potentials both at long range (in the attractive region) and at intermediate distances (in the well region). Considering the conditions used in the experiments, the obtained potentials must be considered very close to the spherical averages of the full intermolecular potential energy surfaces. Extensive ab initio calculations have also been carried out in parallel in order to characterize energy minima in the potential energy surfaces and energy barriers associated to the motion of the rare gas atoms around H2S. An assessment of the relative role of the various interaction components has been also attempted: the combined analysis of experimental and theoretical results suggests that H2S-rare gas aggregates are mainly bound by nearly isotropic noncovalent interactions of the van der Waals type.     

Distinction of gaseous soot precursor molecules and soot precursor particles through photoionization mass spectrometry

Samples were drawn from sooting premixed low-pressure ethylene oxygen flames and investigated through photoionization mass spectrometry using either KrF or ArF lasers as the radiation source. With the former, mass spectra were obtained as described in the literature and characterized through a series of signal groups, one for each C-number and extending to about m/z 1000, assigned as a PAH series. When the ArF laser was used the same series was observed with a somewhat higher sensitivity. In addition, a new series was observed overlaid on the PAH series and starting at about m/z 680. The new series exhibited abundant ions and it completely dominated the spectrum beyond m/z 1000. This series was identified as being the spectrum of soot precursor particles. Through measurement of the ionization order it was concluded that at least two photons are needed for ionization of PAHs whereas the particles need only one photon. Consequently, they can be measured with high sensitivity when an ArF laser is used as the radiation source. Furthermore, the discrimination of soot precursor molecules and soot precursor particles becomes possible through photoionization and this enables an improved understanding of the mass spectra. This should allow a particle growth mechanism to be deduced in the near future.     

Decomposition of Chlorobenzene by Thermal Plasma Processing

Decomposition of chlorobenzene as a model molecule of aromatic chlorinated compounds was studied in radiofrequency thermal plasma both in neutral and oxidative conditions. Optical emission spectroscopy was applied for the evaluation of the plasma excitation and molecular rotational-vibrational temperature. Atomic (C, H, O) and molecular (CH, OH, C₂) radicals were identified, while the morphology of the formed soot was characterized by electron microscopy. Organic compounds adsorbed on the surface of the soot after plasma processing were comprised of various polycyclic aromatic hydrocarbons (PAH) and chlorinated PAH molecules. Their amount was greatly affected by experimental conditions, especially the oxygen content and plate power. The higher input power reduced the ring number of the PAH molecules. Addition of oxygen significantly reduced the amount of both PAHs chlorinated PAH molecules but enhanced the formation of polychlorinated benzene compounds.     

Transformations of griseofulvin in strong acidic conditions--crystal structures of 2'-demethylgriseofulvin and dimerized griseofulvin

The structure of griseofulvic acid, C16H15ClO6, at 100 K has orthorhombic (P2(1)2(1)2) symmetry. It is of interest with respect to biological activity. The structure displays intermolecular O-H...O, C-H...O hydrogen bonding as well as week C-H...pi and pi...pi interactions. In strong acidic conditions the griseofulvin undergoes dimerization. The structure of dimerized griseofulvin, C34H32C12O12 x C2H6O x H2O, at 100 K has monoclinic (P2(1)) symmetry. The molecule crystallized as a solvate with one ethanol and one water molecule. The dimeric molecules form intermolecular O-H...O hydrogen bonds to solvents molecules only but they interact via week C-H...O, C-H...pi, C-Cl...pi and pi...pi interactions with other dimerized molecules.     

Simultaneous detection of two types of soot precursor particles using photoionization mass spectrometry

The soot precursor particles reported in the literature to date may be roughly divided into two classes. Some of their features are very different. Using photoionization mass spectrometry behind premixed atmospheric ethylene/air flames, particle mass distribution functions were measured for these precursor particles. Within a limited C/O range bimodality was found, i.e. two types of particles are formed simultaneously. Through analysis of the photoionization behaviour it was found that the ionization order (IO) is different for these two modes as is the stability of the respective particles. In accordance with earlier measurements, particles with IO = 1 are interpreted as polyaromatic hydrocarbon (PAH) stacks whereas the IO = 2 particles rather seem to be large molecules. This is consistent with the different particle classes mentioned above. Their potential role in soot formation is briefly addressed. Copyright (c) 2007 John Wiley & Sons, Ltd.     

In silico studies of 1,3(R):2,4(S)‐dibenzylidene‐D‐sorbitol as a gelator for polypropylene

The organic gelator 1,3(R):2,4(S)‐dibenzylidene‐D‐sorbitol (DBS) self‐organizes to form a 3‐D network at relatively low concentrations in a variety of nonpolar organic solvents and polymer melt. In this work, we have investigated the interactions between DBS molecules in polypropylene (PP) by molecular modeling. We have used quantum mechanics to elucidate the preferred geometry of one molecule and a dimer of DBS, and molecular mechanics and molecular dynamics to simulate pure DBS, pure PP, and mixture of DBS and PP as condensed phases, at various temperatures. It was found that inter‐ and intramolecular H‐bonds between DBS molecules are formed in PP in a much more pronounced manner than those formed in pure DBS. The most significant intermolecular H‐bonds are formed between the terminal hydroxyl groups. The most significant intramolecular H‐bonds are formed between O5 /H‐O6 groups. Due to the H‐bonds, DBS molecules form a rigid structure similar to liquid crystal forming molecules, which might explain their tendency to create nanofibrils. It seems that the aromatic rings do not contribute significantly to the intermolecular interactions. Their main role is probably to stiff the molecular structure. Temperature dependences of inter‐ and intramolecular interactions are different. Whereas intermolecular interactions peak heights decrease when temperature increases for pure DBS, the intramolecular interaction almost does not change. Copyright © 2012 John Wiley & Sons, Ltd.     

Thermochemical properties of polycyclic aromatic hydrocarbons (PAH) from G3MP2B3 calculations

In this article, we present a new database of thermodynamic properties for polycyclic aromatic hydrocarbons (PAH). These large aromatic species are formed in very rich premixed flames and in diffusion flames as part of the gas-phase chemistry. PAH are commonly assumed to be the intermediates leading to soot formation. Therefore, accurate prediction of their thermodynamic properties is required for modeling soot formation. The present database consists of 46 species ranging from benzene (C6H6) to coronene (C24H12) and includes all the species usually present in chemical mechanisms for soot formation. Geometric molecular structures are optimized at the B3LYP/6-31++G(d,p) level of theory. Heat capacity, entropy, and energy content are calculated from these optimized structures. Corrections for hindered rotor are applied on the basis of torsional potentials obtained from second-order M?ller-Plesset perturbation (MP2) and Dunning's consistent basis sets (cc-pVDZ). Enthalpies of formation are calculated using the mixed G3MP2//B3 method. Finally, a group correction is applied to account for systematic errors in the G3MP2//B3 computations. The thermodynamic properties for all species are available in NASA polynomial form at the following address: http://www.stanford.edu/group/pitsch/.     

Clustering of polycyclic aromatic hydrocarbons in matrix-assisted laser desorption/ionization and laser desorption mass spectrometry

The desorption/ionization behaviour of polycyclic aromatic hydrocarbons (PAHs) in matrix-assisted laser desorption/ionization (MALDI) and laser desorption (LD) mass spectrometry was studied by the solvent-free sample preparation method. As the understanding of the desorption/ionization mechanism in MALDI is normally hampered by the different ionization and desorption efficiencies of the analytes, this work was focused on the analyses of a homologous series of four hexabenzocoronenes (HBCs) possessing virtually the same ionization efficiency: HBC parent, hexamethyl-hexabenzocoronene (HBC-C1), hexapropyl-hexabenzocoronene (HBC-C3) and hexakis(dodecyl)-hexabenzocoronene (HBC-C12). The different signal intensities obtained in their mass spectra can be related to differences in their desorption efficiencies, which are attributed to the different strengths of the intermolecular interactions between unsubstituted and alkylated HBCs in the solid state. The influence of the aromatic structure of PAHs on their photoionization/desorption probability was investigated. As a model system, an equimolar mixture composed of HBC-C12 and hexakis(dodecyl)-hexaphenylbenzene (HPB-C12) was chosen. The aromatic structures of both molecules and thus their absorption coefficients at the laser wavelength differ substantially and have a huge influence on their photoionization efficiency. The combined effect of laser light absorption and intermolecular interactions on the desorption/ionization behaviour of giant PAHs was further studied by using an equimolar mixture composed of a larger PAH (C(222)H(42)) and its dendritic precursor (C(222)H(150)). This mixture shows the opposite behaviour to that of the former example, because the balance between desorption and ionization efficiency has changed significantly. The present investigation should be of interest for providing a better understanding of MALDI and LD spectra obtained from natural PAH-containing samples, such as heavy oils, asphaltenes or pitches, for which our artificial mixtures represent suitable model systems.     

Dynamics and Kinetics of Methanol-Graphite Interactions at Low Surface Coverage

The processes of molecular clustering, condensation, nucleation, and growth of bulk materials on surfaces, represent a spectrum of vapor-surface interactions that are important to a range of physical phenomena. Here, we describe studies of the initial stages of methanol condensation on graphite, which is a simple model system where gas–surface interactions can be described in detail using combined experimental and theoretical methods. Experimental molecular beam methods and computational molecular dynamics simulations are used to investigate collision dynamics and surface accommodation of methanol molecules and clusters at temperatures from 160 K to 240 K. Both single molecules and methanol clusters efficiently trap on graphite, and even in rarified systems methanol-methanol interactions quickly become important. A kinetic model is developed to simulate the observed behavior, including the residence time of trapped molecules and the quantified Arrhenius kinetics. Trapped molecules are concluded to rapidly diffuse on the surface to find and/or form clusters already at surface coverages below 10⁻⁶ monolayers. Conversely, clusters that undergo surface collisions fragment and subsequently lose more loosely bound molecules. Thus, the surface mediates molecular collisions in a manner that minimizes the importance of initial cluster size, but highlights a strong sensitivity to surface diffusion and intermolecular interactions between the hydrogen bonded molecules.     

Reduction of PAH and soot precursors in benzene flames by addition of ethanol

A one-dimensional premixed flame model (PREMIX) and schemes resulting from the merging of validated kinetic schemes for the oxidation of the components of the present mixtures (benzene and ethanol) were used to investigate the effect of oxygenated additives on aromatic species, which are known to be soot precursors, in fuel-rich benzene combustion. The specific flames were low-pressure (45 mbar), laminar, premixed flames at an equivalence ratio of 2.0. The blended fuels were formed by incrementally adding 4% wt of oxygen (ethanol) to the neat benzene flame and by keeping the inert mole fraction (argon) and the equivalence ratio constants. Special emphasis was directed toward the causes for the concentration-dependent influence of the blends on the amount of polycyclic aromatic hydrocarbons (PAHs) formed. The effects of oxygenate addition to the benzene base flame were seen to result in interesting differences, especially regarding trends to form PAH. The modeling results indicated that the concentration of acetylene and propargyl radicals, the main PAH precursors, as well as the PAH amounts were lower in the flame of the ethanol-benzene fuel mixture than in the pure benzene flame and that all of the formed PAHs were issued from the phenyl radical. Finally, the modeling results provided evidence that the PAH reduction was a result of simply replacing "sooting" benzene with "nonsooting" ethanol without influencing the combustion chemistry of the benzene.     

Dihydrogen bonding vs metal-σ interaction in complexes between H2 and metal hydride

The complexes formed by hydrogen with metal hydrides (LiH, NaH, BeH(2), MgH(2), BH(3), AlH(3), Li(2)H(2), Na(2)H(2), Be(2)H(4), and Mg(2)H(4)) have been theoretically studied at the MP2/aug-cc-pVTZ, MP2/aug-cc-pVQZ and CCSD(T)/aug-cc-pVTZ//CCSD/aug-cc-pVTZ levels of theory. The hydrogen molecule can act as a Lewis acid or base. In the first case, a dihydrogen bonded complex is obtained and in the second an interaction between the σ-bond of the hydrogen molecule and an empty orbital of the metal atoms is found. Quantum theory of atoms in molecules and natural bond orbitals methods have been applied to analyze the intermolecular interactions. Additionally, the cooperativity effects are analyzed for selected complexes with two H(2) molecules where both kinds of interactions exist simultaneously.