Crystallization behaviors of carbon fiber reinforced BN‐Si3N4 matrix composite

The crystallization behaviors of a new carbon fiber reinforced composite with a hybrid matrix comprising BN and Si₃N₄ prepared by precursor infiltration and pyrolysis were investigated by Fourier transform infrared spectroscopy, X‐ray diffraction and scanning electron microscopy. The results show that the as‐received composite is almost amorphous, and its main composition is BN and Si₃N₄. When heat treated at 1600°C, the composite is crystallized and shows a much better crystal form. When heat treated at 2100°C, Si₃N₄ in the matrix is decomposed, and BN exhibits a relatively complete crystallization. The existence of B₄C and SiC is detected, which indicates the interfacial chemical reactions between nitride matrices and carbon fibers. The surface morphology of carbon fibers in the composite changed significantly when heated from 1600 to 2100°C, which also proved the occurrence of interfacial chemical reactions. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal and molecular structure of 3‐phenyl‐4‐(p‐chlorobenzylamino)‐4,5‐dihydro‐1‐H‐1,2,4‐triazol‐5‐on

The structure of the title compound, C₁₅H₁₃N₄OCl was determined by single crystal X‐ray diffraction technique. The structure consists of a p‐chlorobenzylamino moiety and triazol and phenyl rings. The title compound crystallizes in the monoclinic space group P2₁/c with a = 14.368(3), b = 6.255(3), c = 17.631(3) Å, β = 113.24(3)°, Z = 4, V = 1455.8(8) ų and D_x = 1.372 gcm^‐3. The structure was solved by direct methods and refined by full‐matrix least‐squares method (R=0.0477). The dihedral angle between the triazole moiety and the phenyl ring is 28.8(3)°. The molecular packing is stabilized by N‐H…N and N‐H…O types of inter molecular hydrogen bonds. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Controllable synthesis and field emission properties of In2O3 nanostructures

Large‐scale In₂O₃ nanorods, nanocubes and nanowires have been successfully synthesized by chemical vapor deposition route under atmospheric pressure. The structures and morphologies were characterized by x‐ray diffraction (XRD), scanning election microscopy (SEM) and high‐resolution transmission electron microscopy (HRTEM). The growth mechanisms of these In₂O₃ nanostructures were analyzed in detail based on the experimental results. Field‐emission measurements of these nanostructures demonstrated that nanorods with rectangular cross‐section possessed good performance with a turn‐on field of 2.47 Vμm^–1 and a field enhancement factor of 4597. The room‐temperature photoluminescence (PL) spectrum of the In₂O₃ nanostructure showed UV emission centered at about 396 nm and visible emissions located at 541 and 623 nm. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The effects of solvent and microwave on the preparation of Magnesium Oxide Precursor

Four methods including hydrothermal method, glycol‐hydrothermal method, microwave‐hydrothermal method and glycol‐microwave‐hydrothermal method were used to prepare magnesium oxide precursor by the reaction of MgSO₄·7H₂O with (NH₄)₂CO₃. The composition, crystallinity, morphology, aspect ratio, yield, functional groups, atom distribution, and interplanar spacing of the sample were investigated by X‐ray diffraction (XRD), Scan Electron Microscope (SEM), Fourier Transform Infrared Spectroscopy (FT‐IR), and High Resolution Transmission Electron Microscope (HRTEM). The properties of Magnesium Oxide precursor were compared with each other. The results of FT‐IR and XRD showed that the crystals were all nesquehonite. However, it was shown by FT‐IR results that the crystals prepared by glycol‐microwave‐hydrothermal method contained OH⁻ and HCO₃⁻ groups, which indicated that the Mg(OH)(HCO₃)·2H₂O type crystals would be facilitated by this method. The glycol‐hydrothermal method can create high quality Magnesium Oxide precursor with a high degree of crystallinity, high purity, high aspect ratio, smooth surface, and good dispersibility.     

Mild hydrothermal synthesis and structures of mixed‐valence iron phosphates: SrFe3(PO4)3 and the interesting Mg2+‐doped AFe3 (PO4)3 (A = Ba,Pb) in Fe2+ site

Series of mixed valence monophosphates AFe_3‐xMg_x(PO₄)₃ [A = Sr(x = 0), Ba(x = 0.6), Pb(x = 0.6)] were synthesized by mild hydrothermal treatment at 210 °C. Refinements of single crystal X‐ray diffraction datas show all these compounds are isostructural. The attempts to make AFe₃(PO₄)₃ (A = Ba, Pb) hydrothermally in the experiment were unsuccessful. However, the Mg‐doped homologues AFe_2.4Mg_0.6(PO₄)₃ (A = Ba, Pb) were synthesized with the addition of MgCO₃ in the reactants as mineralizer. EDS and single crystal X‐ray data refinement indicated that the Mg²⁺ cations were doped in the Fe²⁺ sites of AFe_2.4Mg_0.6(PO₄)₃ (A = Ba, Pb). The influence of the Mg‐doping on the structure and the reason why the Mg doped in the Fe(II) site instead of A site was discussed from the point of view of the bond valence model.     

Synthesis,crystal structure and third order nonlinear optical properties of bis(tetra‐n‐propylammonium) bis(2‐thioxo‐1,3‐dithiole‐4,5‐dithiolato)cuprate(II)

A novel bis (dmit) complex of copper (II), [(C₃H₇)₄N]₂[Cu(dmit)₂] ( 1 ), where dmit is 2‐thioxo‐1,3‐dithiole‐4,5‐dithiolate, was prepared and structurally characterized by X‐ray single crystal diffraction. The copper (II) atom is tetracoordinated by four dmit S atoms, forming a nearly square planar arrangement. The [Cu(dmit)₂]^2‐ anions and the [(C₃H₇)₄N]⁺ counter‐cations form a three‐dimensional solid‐state structure by C–H…S hydrogen bonds. The third‐order nonlinear optical properties of the complex were determined by picosecond Z‐scan technique at a wavelength of 1064 nm. The results indicate the compound exhibits reverse saturation absorption and self‐defocusing performance. The molecular second‐order hyperpolarizability γ is calculated to be as high as (1.8±0.2)×10^‐30 esu. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The Crystal and Molecular Structure of tert‐Butoxycarbonyl ‐ α‐aminoisobutyryl ‐ isoleucyl ‐methylester

The crystal structure of the synthetic peptide Boc — Aib — Ile ‐ OMe (C₁₆ H₃ 0 N₂ O₅ ) has been determined from three‐dimensional X — ray diffraction data. The peptide crystallizes in triclinic space group P1 with a = 9.570(9), b = 10.261(7), c = 10.610(2) Å , α = 101.9(0), β = 91.7(0), γ = 98.6(0)° V = 1006.1(12) ų, Z = 2, D_calc = 1.09 Mg m^‐3. The structure was solved by direct methods and refined by full‐matrix least‐squares method to an R value of 0.072 (λ = 1.5418Å). The conformation of Aib residue in molecule A is αL and in molecule B is αR. The Ile residue in molecule A adopts folded conformation, while in molecule B it is in the extended region. The peptide units are trans and show significant deviations from planarity.     

Growth and magnetic‐optical properties of Sr3Gd(BO3)3 and Sr3TbxGd1‐x(BO3)3 single crystals

Single crystals of Sr₃Gd(BO₃)₃ (SGB) and Sr₃Tb_xGd_1‐x(BO₃)₃ (TSGB) with dimension Ø 20 mm×20 mm have been grown by Czochralski method. The grown crystals were characterized by X‐ray powder diffraction analysis which showed the crystals belong to hexagonal structure with lattice parameters of a=b=1.254 nm, c=0.926 nm (SGB) and a=b=1.253 nm, c=0.925 nm (TSGB). In TSGB, x=17.7% was obtained by X‐ray fluorometry which showed the segregation coefficient of Tb is closed to 1. The transmission spectrum was measured, which indicated the crystals have high transmittance in 400‐1100 nm region. The Faraday rotation of single crystals at 532 nm wavelength was measured at room temperature. Finally, the Verdet constants were investigated, (SGB) V=17.9 degcm^‐1T^‐1 and (TSGB) V=21.3 degcm^‐1T^‐1. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal Structure of Diethyl 2‐[2,2,2‐ trifluoro‐1‐(indole‐3‐yl)‐ethyl]‐2‐acetamidomalonate

The title compound (C₁₉H₂₁F₃N₂O₅) has been determined from three dimensional X‐ray diffraction data. The crystals are monoclinic, a = 7.626(4)Å, b = 17.515(4)Å, c = 15.066(3)Å, β = 101.02(3)°, V = 1975(1)ų, Z = 4, D_calc = 1.393g cm^‐3, space group P2₁/c. The structure was solved by direct methods and refined by full‐matrix least‐squares method (R = 0.039).     

Surfactant directed synthesis of mesoporous alumina and α‐alumina single crystal

Mesoporous Al₂O₃ were positively synthesized via treatment of the freshly precipitated amorphous alumina gel using aluminium sulphate as aluminium source, and sodium dodecyl sulphate (SDS) as structure‐directing agent (SDAs). The microstructures, morphologies and textural properties of the as‐prepared materials were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and thermo gravimetric analysis (TG‐DTA). The calcined product at 600 °C was highly porous in nature having a BET surface area of 42 m²/g. These porous Al₂O₃ exhibits excellent adsorption performance for Congo red and the corresponding decolourisation efficiencies reached 99% in just 15 min at 27 °C. The subsequent calcined product at 1200 °C is the alpha alumina single crystal hexagonal platelets with rhombohedral crystallization.     

Influence of thermoannealing on crystallinity and optical properties of Sb2S3 thin films

Sb₂S₃ thin films are obtained by evaporating of Sb₂S₃ powder onto glass substrates maintained at room temperature under pressure of 2×10^‐5 torr. The composition of the thin films was determined by energy dispersive analysis of X‐ray (EDAX). The effect of thermal annealing in vacuum on the structural properties was studied using X‐ray diffraction (XRD) technique and scanning electron microscopy (SEM). The as‐deposition films were amorphous, while the annealed films have an orthorhombic polycrystalline structure. The optical constants of as‐deposited and annealed Sb₂S₃ thin films were obtained from the analysis of the experimental recorded transmission spectral data over the wavelength range 400‐1400 nm. The transmittance analysis allowed the determination of refractive index as function of wavelength. It was found that the refractive dispersion data obeyed the single oscillator model, from which the dispersion parameters (oscillator energy, E₀, dispersion energy, E_d) were determined. The static refractive index n(0), static dielectric constant, ε_∞, and optical band gap energy, E_g, were also calculated using the values of dispersion parameters. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of a layered chlorozincophosphate templated by protonated 4‐methylpiperidine

A chlorozincophosphate with the composition Zn(HPO₄)Cl·[C₆H₁₄N] has been synthesised under mild conditions in water medium in presence of 4‐methylpiperidine as organic template. The structure was determinated by single crystal X‐ray diffraction. The unit cell is orthorhombic (space group Pcab) with a = 8.743(9), b = 9.592(6), c = 26.573(6) Å, Z = 8 and V = 2228.91(12) ų. The structure involves a network of ZnO₃Cl and PO₃(OH) tetrahedra forming macroanionic inorganic layers with four and eight‐membered rings. Charge balance is achieved by the protonated amine which is trapped in the interlayers space and interacts with the organic framework through hydrogen bonding. Solid state ³¹P and ¹³C MAS‐NMR spectroscopies are in full agreement with the X‐ray structure. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

X‐ray diffraction analysis of powder and thin film of (Gd1‐x Yx)2O3 prepared by sol‐gel process

The mixed oxide (Gd_1‐xY_x)₂O₃ (0.0 ≤ x ≤ 1.0) were synthesized, as powder and thin film, by a sol‐gel process. X‐ray diffraction data were collected and crystal structure and microstructure analysis were performed using Rietveld refinement method. All samples were found to have the same crystal system and formed solid solutions over the whole range of x. The cationic distribution, Gd³⁺ and Y³⁺, over the two non‐equivalent sites 8b and 24d of the space group Ia3 is found to be random for all values of (x). The lattice parameter is found to vary linearly with the composition (x). Replacing Gd³⁺ and Y³⁺ by each other introduces a systemic decrease in the x‐coordinate of cation position (24d) and slight changes in the oxygen coordinates. Crystallite size and microstrain analysis is performed along different crystallographic directions and anisotropic changes are found with the composition parameter (x). The average crystallite size ranges from 75 to 149 nm and the r.m.s strain from 0.027 to 0.068 x10^‐2. Textured Gd_1.841Y_0.159O₃ (400) buffer layers, with a high degree of alignment in both out‐plane and in‐plan, are successfully grown on cube textured Ni (001) tape substrates by sol–gel dip coating process. The resulting buffer layers are crack‐free, pinhole‐free, dense and smooth. YbBa₂Cu₃O_7‐x (YbBCO) thin film could be (00l) epitaxially grown on the obtained buffer layer using sol–gel dipping technique. (© 2007 WILEY ‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Magnetic properties and X‐ray photoelectron spectroscopy of nanocrystalline Ho3Al5O12

Nanocrystalline holmium aluminium garnet (Ho₃Al₅O₁₂) has been prepared for the first time by modified Pechini's reaction after sintering the precursor gel at 1223 K. The nanomaterial has been characterized by X‐ray diffraction (XRD), selected area electron diffraction (SAED) and high resolution transmission electron microscopy (HRTEM). The XRD pattern confirms the formation of single‐phase Ho₃Al₅O₁₂; the average size of the nanoparticles has also been determined. X‐ray photoelectron spectroscopy (XPS) has been used to study the chemical composition and bonding in the as‐prepared samples. The binding energies of core‐level electrons in Ho, Al and O in the title material have been found slightly shifted compared to the values of the respective elements. DC magnetic susceptibility has been measured in the temperature range 2 – 260 K. Low effective magnetic moment of Ho³⁺, μ_eff = 1.35 µ_B and Weiss constant have been derived from the inverse magnetic susceptibility–temperature linear plot. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Thermal analysis,powder diffraction and spectroscopic investigation of the solid phases of 1‐chloro‐2,2‐dimethylpropane

By the substitution of one methyl group in Neopentane C(CH₃)₄ with a methylchlorid group the globular sphere is expanded in 1‐chloro‐2,2‐dimethylpropane (CH₃)₃C(CH₂Cl). With the aid of DSC measurements, X‐ray powder diffraction, ¹H NMR and ³⁵Cl NQR measurements two orientationally disordered (plastic) phases were established. The low temperature structure was solved and a structural model of phase II is proposed. A mechanism to describe the reorientation in the different phases is given as well as a connectivity scheme between the phases is discussed. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Well‐defined Sb2S3 nanostructures: citric acid‐assisted synthesis,electrochemical hydrogen storage properties

Well‐defined (three‐dimensional) 3‐D dandelion‐like Sb₂S₃ nanostructures consisted of numerous nanorods have been achieved via a facile citric acid‐assisted solvothermal process. The as‐prepared products were characterized by X‐ray diffraction (XRD), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high‐resolution TEM (HRTEM), respectively. The influence factors of the formation of the hierarchical Sb₂S₃ nanostructures are discussed in details based on FESEM characterizations. By simply controlling the quantity of citric acid, the nucleation and growth process can be readily tuned, which brings the different morphologies and nanostructures of the final products. On the basis of a series of contrastive experiments, the aggregation‐based process and anisotropic growth mechanism are reasonably proposed to understand the formation mechanism of Sb₂S₃ hierarchical architectures with distinctive morphologies including nanorods, and dandelion‐like nanostructures. Charge‐discharge curves of the obtained Sb₂S₃ nanostructures were measured to investigate their electrochemical hydrogen storage behaviors. It revealed that the morphology played a key role on the hydrogen storage capacity of Sb₂S₃ nanostructure. The dandelion‐like Sb₂S₃ nanostructures exhibited higher hydrogen storage capacity (108 mAh g⁻¹) than that of Sb₂S₃ nanorods (95 mAh g⁻¹) at room temperature.     

Preparation of crystalline fibres of codoped BaAl2O4:Eu2+:Cr3+

Phosphor material BaAl₂O₄:Eu²⁺, Cr³⁺ with varying concentrations of Cr co‐doping were prepared by solid‐state synthesis method. Crystalline fibres were obtained by controlled annealing temperature. Synthesized compositions were characterized for their phase and crystallinity by powder x‐ray diffraction. The crystalline morphology was investigated using SEM analysis. High resolution transmission electron microscopy (HRTEM) in image and diffraction modes was used to investigate the microstructure. The effect of Cr doping on quality and morphology of grown crystals was investigated. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis,characterization and crystal structure of a novel Ni(II) coordination polymer with dipyrido[3,2‐a:2′,3′‐c]phenazine and 4,4′‐oxy(bisbenzoate)

A novel coordination polymer, [Ni(dppz)(oba)(H₂O)]·0.5H₂O (dppz = dipyrido[3,2‐a:2′,3′‐c]phenazine and oba = 4,4′‐oxy(bisbenzoate)) has been synthesized through hydrothermal method and characterized by IR, and single‐crystal X‐ray diffraction. It crystallizes in monoclinic, space group C2/c with a = 23.163(5), b = 18.211(4), c = 14.460(3) Å, α = γ = 90°, β = 100.45(3)°, V = 5998(2) ų, Z = 2. The structure was solved by direct methods and refined to R = 0.0866 (wR₂ = 0.1836). The compound exhibits interesting one‐dimensional chain structures, which are further stacked through π‐π interactions to form supramolecular double chains. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of a new nonlinear optical single crystal: L‐Lysinium trifluoroacetate

Single crystals of a new L‐Lysine salt: L‐Lysinium trifluoroacetate {abbreviated as LLyTFA; [(NH₂)‐(CH₂)₄‐CH‐(NH₃)‐(COOH)]⁺ CF₃COO^‐} were grown by slow evaporation of an aqueous solution at room temperature. The grown crystals were subjected to single crystal X‐ray diffraction, FTIR and UV‐Vis‐NIR spectrum analyses. The UV‐Vis‐NIR spectrum shows that the absorption is very less in the whole of the region from ultraviolet to near IR. The Kurtz‐Perry powder SHG measurement using a Nd:YAG laser of wavelength 1064nm confirms the frequency doubling of the crystal and its powder SHG efficiency was measured as d_eff = 0.96 d_eff (KDP). (© 2007 WILEY ‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Photoacoustic studies on the thermal properties of the NLO compound: L‐alaninium maleate

Studies on thermal and optical properties are very essential for a nonlinear optical material. Photoacoustics (PA) is a recently developed non‐destructive testing (NDT) tool for studying such properties. L‐Alaninium maleate (C₃H₈NO₂⁺·C₄H₃O₄^‐), an organic non‐linear optical (NLO) material was synthesized using submerged seed solution method and was characterized by single crystal X‐ray diffraction (XRD) and density. PA technique was used to determine the thermal parameters of LAM crystals. Moreover, possible phase transition analysis was conducted to ascertain the thermal stability. Scanning electron microscopic (SEM) studies were also carried out and crystal‐packing features discussed. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)