Synthesis and characterization of semiconductor metal sulfide nanocrystals using microemulsion technique

The semiconductor nanocrystals ZnS, PbS, CdS and CuS were synthesized via microemulsion technique involving metal acetate, reducing agent (Na₂S) and Triton X‐100 as surfactant. Nanocrystals were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The average size of ZnS, PbS, CdS and CuS nanocrystals were found to be 5.6 nm, 13.3 nm, 11.4 nm and 6.2 nm, respectively. Different parameters like surfactant (Triton X‐100) concentration, water‐to‐surfactant ratio (ω), precursor concentration [zinc acetate, (Zn(AC)₂], reducing agent concentration [sodium sulphide, (Na₂S)] were optimized to synthesize ZnS quantum dots.     

Self‐template hydrothermal synthesis ZnS microspheres

Zinc sulfide (ZnS) microspheres were synthesized by a self‐template hydrothermal route using thiourea as sulphur source. The formation of these hollow spheres was mainly attributed to the oriented aggregation of ZnS nanocystals around the gas‐liquid interface between gas (H₂S, NH₃, or CO₂) and water followed by an Ostwald ripening process. The gas bubbles of H₂S, NH₃, or CO₂ produced during the reaction might play a soft‐template to form ZnS hollow microspheres. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), electron diffraction (ED), and photoluminescence (PL). The crystal structure of prepared ZnS microspheres is hexagonal phase polycrystalline. The average microspheres diameter is 1.5 ‐ 6 µm. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

On the Morphological Changes and Twinning of ZnS (Sphalerite) Crystallites under Hydrothermal Conditions

Morphological characteristics and twinning mechanism of ZnS crystals under hydrothermal conditions have been investigated in this paper. It was shown that under hydrothermal conditions the morphology of ZnS crystallites changes along the four‐fold axis directions, and the crystals are observed in a positive or negative tetrahedron, or in a combination of positive and negative tetrahedra depending on the growth conditions. The positive tetrahedral areas on the crystallites get larger with increase of the concentrations of OH^‐ and S^2‐ in solutions, whereas the twinned crystallites of ZnS taking an elliptic shape with (111) as composition plane are easily formed in weak basic solutions. It can be found that the morphologies of ZnS crystals are in accordance with the crystallization orientations of positive or negative coordination tetrahedra ([S‐Zn₄]⁶⁺, [Zn‐S₄]^6‐) in the crystal although, in some cases, the practical morphology could be greatly affected by growth conditions, and the twinning mechansim can be suggested based on the linkage of growth units of positive and negative coordination tetrahedra, which were formed in the solution. The present investigations further indicated that the crystal chemistry approach based on the linkage/incorporation of growth units previously proposed by us can be sucessfully applied to interpret the growth mechanisms of the crystals and to control a desirable morphology.     

Effect of CuCl2 on hydrothermal crystallization of calcium sulfate whiskers prepared from FGD gypsum

Using purified flue‐gas desulfurization (FGD) gypsum as raw material, effects of CuCl₂ on crystal morphology, phase structure, aspect ratio and crystallization of hydrothermal products prepared via hydrothermal crystallization in H₂SO₄‐H₂O solutions were investigated. The results show that dosage of CuCl₂ has a significant effect on the morphology, aspect ratio and crystallization of calcium sulfate whiskers (CSWs), but no effect on their phase transformation . At a dosage of 15 g CuCl₂/kg FGD gypsum, the produced calcium sulfate whiskers had diameters ranging from 1 to 3 μm with average aspect ratio greater than 200 . Transmission electron diffraction patterns and highly magnified surface morphology of CSWs were found different from those of self‐assembly crystals. Compared to self‐assembly crystals, the produced CSWs showed a single crystal structure and their surface was very smooth.     

Gas bubble associated mass transport in Bridgman-Stockbarger melt growth system

Experimental evidence has been obtained showing that gas bubbles may be responsible for melt stirring in Bridgman-Stockbarger growth system which results in Pfann type impurity distribution profiles along the crystal length. The hypothesis of the gas bubble associated mass transfer mechanism is supported by the production of Y₃Al₅O₁₂–Nd³⁺ single crystals under conditions which eliminate or limit gas bubble nucleation in the melts with Nd³⁺ distribution profiles similar to those generally observed in melt growth systems where the mass transport in the melts is limited to diffusion.     

Chemical vapor deposition of scandium hydride

A method is developed for growing scandium hydride (ScH₂) crystals from the vapor phase. Nucleation and growth of the hydride occur on metallic Mo when vapors of ScCl₃ and an excessive amount of a reducing metal (Na or Mg) are mixed in a flow of H₂ gas at atmospheric pressure at temperatures in the 800–970°C range. Crystal morphology ranges over dendrites, needles, minute single crystals, rods, films, and whiskers, depending principally on the reducing metal used and the partial pressure of the ScCl₃.     

Precipitation of nesquehonite from homogeneous supersaturated solutions

The homogeneous (unseeded) precipitation of nesquehonite (MgCO₃·3H₂O) was studied over the temperature range of 10‐40 °C. Precipitation was triggered by the supersaturation created by mixing MgCl₂ solution (0.5‐1.5 M) with Na₂CO₃ solution in the same concentration range. The Meissner's method was adopted in the calculation of supersaturations during the MgCl₂‐Na₂CO₃ reaction to monitor the precipitation. Solids were identified using X‐ray diffraction (XRD) analysis and scanning electron microscope (SEM) images. In the temperature range of 10‐40 °C, MgCO₃·3H₂O with needle‐like or gel‐like morphology was precipitated. It was seen that the length, width and surface smoothness of the particles changed with reaction temperature and supersaturation. The supersaturation (S) was in the range of 1.09‐58.68 during titration of Na₂CO₃ solution. The dimension of the crystals increased with longer addition time (or lower initial concentration of reactant) at the same temperature. Slower addition via titration of 2 h followed by 2 h of equilibration at 40 °C proved successful in producing well developed needle‐like MgCO₃·3H₂O crystals of 30‐50 μm long and 3‐6 μm wide. MgCO₃·3H₂O obtained were calcined to produce highly pure magnesium oxide (MgO) at 800 °C. The morphology of MgO was similar to that of their corresponding precursors. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A simple surfactant‐free route for preparation of flower‐like crystals of CoS with hierarchitectures

Hierarchical cobalt sulfide crystals with flower‐like microstructures were successfully prepared by a simple one‐pot solvothermal route, employing CoCl₂·6H₂O as a cobalt precursor and KSCN as a sulfur source. The morphology of these microstructures can be easily controlled by adjusting the molar ratio of glycol to DMF in the solvent. The products were characterized by XRD and SEM. Possible formation mechanisms of CoS hierarchical microspheres are proposed. The influences of the nature of reaction media on the morphological evolution were also investigated and it was found that the ratio of DMF to glycol was of great importance for the formation of CoS morphology.     

Growth of ytterbium tartrate trihydrate crystals in silica and agar‐agar gels and their characterization

Single crystals of ytterbium tartrate trihydrate have been grown by gel method using silica and agar‐agar gels as media of growth. The medium of growth influences the morphology of grown crystals, silica gel yielding single and polycrystalline in the form of spherulites whereas agar‐agar gel leading to growth of single and twinned crystals. Materials grown as single crystals have been characterized by using optical and scanning electron microscopy (SEM), EDAX, XRD, FT‐IR, CHN and thermogravimetric techniques. The stoichiometry of the grown single crystals is suggested to be Yb(C₄H₄O₆) (C₄H₅O₆).3H₂O. The FT‐IR spectrum shows the presence of singly as well as doubly ionized tartrate ligands. Results of thermal analysis indicate that the material is thermally stable up to a temperature of 200 °C. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Conversion of CuS thin films to structured nanosheet CuyS (1 < y ≦ 2) by vacuum annealing

In this study, large‐area and uniform thickness novel nano‐sheet structured CuS thin films on ITO glass have been prepared by the one‐step electrodeposition method from a dimethyl sulfoxide solution. Thin films of completely preserved nano‐sheet like morphology of Cu_yS (y = 1.75, 1.8, 1.95, and 2.0) are grown by vacuum annealing CuS thin films at 500 °C for different lengths of time. The 500 °C sample heated for 10 hours was nearly converted to single phase of Cu₂S with y ∼ 2. The optical direct band gaps of nano‐sheet Cu_yS thin films annealed at 500 °C of 2, 6, and 10 hours in vacuum were found to be 1.94, 1.68, and 1.44 eV, respectively.     

Characterization of pure and doped potassium hydrogen tartrate single crystals grown in silica gel

Growth of pure‐, sodium‐ and lithium‐ doped potassium hydrogen tartrate single crystals by gel technique is reported. Growth conditions conducive for the growth of single crystals are worked out. The crystals are characterized by using powder XRD, SEM, FTIR, AES, EDAX, CH analysis and thermoanalytical techniques. The stoichiometric composition for the grown crystals are established as KHC₄H₄O₆.H₂O, (K)_0.98(Na)_0.02.H₂O and (K)_0.94(Li)_0.06HC₄H₄O₆.H₂O. Doping of sodium and lithium in the pure potassium hydrogen tartrate single crystals is found to influence the size, perfection, morphology, crystal structure and the thermal stability of crystals. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth of Ba2Re(Y,Pr)Ru1‐xCuxO single crystals in a high temperature solution drop using an infrared imaging system

Infrared imaging furnace was used to grow single crystals of Ba₂YRu_1‐xCu_xO₆ and Ba₂PrRu_1‐xCu_xO₆ using high temperature solutions of PbO‐PbF₂ in the form of a bubble attached to the feed rods. Several small crystals were found deposited on the cooler portions of the sintered rod as well as in the drop like portion at the end of the rod. These crystals were collected and the morphology, microstructure and magnetic properties were studied. The details of these investigations are presented. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Particle size of powders under hydrothermal conditions

Various non‐oxide (CuI, AgI, AgCl, PbS, CuS and ZnS) and oxide (ZnO, TiO₂, SnO₂, CeO₂ and ZrO₂) powders were prepared under hydrothermal conditions to investigate the effects of temperature, pH and precursors on the particle size of powders. It was found that the particle sizes of PbS, CuS and ZnS powders were much smaller than that of CuI, AgI and AgCl powders prepared under the same conditions. The particle sizes of TiO₂, SnO₂, CeO₂ and ZrO₂ powders are much smaller than that of ZnO powders prepared under the same conditions. It is concluded that the solution conditions have a certain effect on the particle size of powders under the hydrothermal conditions. The particle size of powders increased with the rising of temperature. Additional factors affecting the particle size were uncovered through studying the nucleation mechanism. The particle size was mainly related to the Madelung constant and the electric charge number of ions. Powders with smaller particle size resulted from systems that possessed the larger Madelung constant and ionic charge number. (© 2003 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation of strontium chloride hexahydrate by batch‐cooling crystallization: Control of crystal size and morphology

The effects of initial supersaturation, cooling rate, and stirring rate on the morphology of strontium chloride hexahydrate (SrCl₂·6H₂O) crystals were investigated by batch‐cooling crystallization, providing optimal operating conditions. Uniform needle‐like crystals with a length of 1200.50 μm and a width of 100.92 μm on average were obtained. The corresponding aspect ratio of length to width was about 11.90. Moreover, the morphological modification of SrCl₂·6H₂O crystals using cetyltrimethylammonium chloride (CTAC) was studied. When 20.30 mmol·L⁻¹ of CTAC was added, the length and width of crystals were 792.71 μm and 233.25 μm, respectively, and the corresponding aspect ratio decreased to 3.40. The shape of SrCl₂·6H₂O crystal changed to granule‐like, probably because of the strong interaction of CTAC with the SrCl₂·6H₂O facets with a denser distribution of Cl⁻ ions. This study offers a simple, flexible, and highly efficient approach to regulate the morphology of SrCl₂·6H₂O crystals and opportunities for multiple applications of SrCl₂·6H₂O.     

Two CrIII containing metal‐1‐hydroxyethylidenediphosphonate compounds: Synthesis,structure, and morphology

Two novel layered Cr^III containing metal‐hedp compounds, Na₂₀AlCr^III[CH₃C(O)P₂O₆]₆·O₃·(H₂O)₂₆·(H₃O)₁₀ (CH₃ CH₂ OH) and Na₆Cr^III[CH₃C(OH)P₂O₆]₃·(H₂O)₂₁(H₃O)₃ (designated as DLES‐AlCr and DLES‐Cr^III respectively), were hydrothermally synthesized. Their structures were determined by single‐crystal X‐ray diffraction. The two crystals are isostructural with propeller‐like chiral motifs and hexagonal rings along [001]. DLES‐AlCr crystal exhibits interesting hollow tubular hexagonal morphology, while DLES‐Cr crystal possesses solid hexagonal morphology. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of zinc oxide crystals with different shapes from zincate aqueous solutions stabilized with triethanolamine

ZnO crystals were synthesized from basic aqueous solutions including zincate ions stabilized with triethanolamine (N(C₂H₄OH)₃, teaH₃) by heating at 60°C. The influence of the basicity of the solutions on the morphology of the ZnO crystals was examined. The aqueous solutions were prepared using ZnSO₄·7H₂O, N(CH₃)₄OH (TMAOH), and teaH₃ as a zinc source, a base, and a stabilizer, respectively, at a zinc concentration of 0.2 M at a teaH₃ / Zn molar ratio of 4. Clear solutions were obtained at a molar ratio of TMAOH / Zn ≥ 3.0. When the clear solutions, in which glass or polyester substrates were placed, were heated at 60°C, agglomerates of ZnO crystals were deposited on the substrates in the TMAOH / Zn range from 3.0 to 3.6. With increasing the TMAOH / Zn ratio, the shape of the resulting ZnO crystals changed from a short asymmetric column with a hexagonal flat edge and a rounded one, through a rocket‐like shape formed by intergrowth, to a hexagonal rod. Although no films of ZnO were formed, ZnO crystals with different shapes were synthesized. When the glass substrates pre‐coated with a ZnO thin film by a sol‐gel method were used, highly oriented, dense ZnO films were formed. The films consisted of rod‐like crystals aligned normal to the substrate surface. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Mass spectrometric analysis of gaseous crystallization medium,growing, and some properties of α-Al2 18O3 crystals

Some gas phase processes during the vacuum vertical directed crystallization of α-Al₂ ¹⁸O₃ are studied in this paper. An effect of these processes on the H, C, N concentrations in the crystals is discussed. The detected pulsations of partial H₂ and C¹⁸O pressures are a result of bubble destruction at the melt-gas interface. The C¹⁸O bubbles are formed because of chemical interaction between the melt and carbon-containing phases of container material. Besides the container wall, the H₂ bubbles can be generated also at the crystallization front supersaturated by H₂. The perfect α-Al₂O₃ and α-Al₂ ¹⁸O₃ crystals grown under the same conditions have noticeable differences of their density, microhardness and lattice parameters. This is explained by an isotopic substitution effect.     

Precipitation kinetics of sodium bicarbonate in an industrial bubble column crystallizer

Sodium bicarbonate is a substance which is produced in the middle stages of the soda ash production process. In this precipitation process, carbon dioxide gas is continuously injected into the bubble column reactor which contains carbonate and bicarbonate solutions. To elucidate the key parameters affecting precipitation kinetics, an experimental study was conducted to understand nucleation and growth in conditions of industrial reactor. The composition of the solution is followed during the crystallization process by titration. Magma density is also monitored and crystal size distribution (CSD) is obtained by sieving. The method of moments was used to determine nucleation and growth rates of crystals. The nucleation and growth rate correlations for sodium bicarbonate precipitation in industrial scale were correlated by empirical power laws as B = 26.685M_T^0.42Δw^1.31 and G = 1.381×10^–4Δw^1.53. The nucleation and growth rate correlations obtained in this study can be used to simulate the crystallization of sodium bicarbonate plants. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The effects of solvent and microwave on the preparation of Magnesium Oxide Precursor

Four methods including hydrothermal method, glycol‐hydrothermal method, microwave‐hydrothermal method and glycol‐microwave‐hydrothermal method were used to prepare magnesium oxide precursor by the reaction of MgSO₄·7H₂O with (NH₄)₂CO₃. The composition, crystallinity, morphology, aspect ratio, yield, functional groups, atom distribution, and interplanar spacing of the sample were investigated by X‐ray diffraction (XRD), Scan Electron Microscope (SEM), Fourier Transform Infrared Spectroscopy (FT‐IR), and High Resolution Transmission Electron Microscope (HRTEM). The properties of Magnesium Oxide precursor were compared with each other. The results of FT‐IR and XRD showed that the crystals were all nesquehonite. However, it was shown by FT‐IR results that the crystals prepared by glycol‐microwave‐hydrothermal method contained OH⁻ and HCO₃⁻ groups, which indicated that the Mg(OH)(HCO₃)·2H₂O type crystals would be facilitated by this method. The glycol‐hydrothermal method can create high quality Magnesium Oxide precursor with a high degree of crystallinity, high purity, high aspect ratio, smooth surface, and good dispersibility.     

Synthesis of PbTe‐SnTe particles by thermal decomposition of salts to create nano‐structured thermoelectric materials

Micro‐ and nanocrystalline particles of Pb‐Sn‐Te mixed crystals were synthesized using thermal decomposition and chemical interaction of lead acetate, tin oxalate and tellurium powder mixture in H₂ atmosphere. For the process parameter optimization data of thermal gravimetry (TG), X‐ray diffraction (XRD), electronic microscopy (TEM, SEM) and measurements of the specific surface of particles were used. Additionally the influence of gas phases on the decomposition kinetics, crystal structure, size, specific surface of the particles, gains composition and the physical properties were analyzed. Seebeck coefficient values increased and conductivity decreased with decreasing tin concentration. The presented method for preparing PbTe‐SnTe polydisperse particles is developed to create nano‐structured thermoelectric materials with high figure of merit. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)