Access to C(sp3)-C(sp2) and C(sp2)-C(sp2) bond formation via sequential intermolecular carbopalladation of multiple carbon-carbon bonds

A synthetic strategy of 4-benzyl-substituted 1,3-butadiene derivatives through Pd-catalyzed three-component coupling reaction of benzyl chlorides, alkynes, and monosubstituted alkenes is described. This tandem coupling reaction forms a C(sp(3))-C(sp(2)) bond and a C(sp(2))-C(sp(2)) bond sequentially in a single-step operation.     

Aza-oxindole synthesis by oxidative coupling of C(sp2)-H and C(sp3)-H centers

A Cu(II) mediated oxidative C(sp(2))-H and C(sp(3))-H coupling protocol gives access to aza-oxindoles in good to excellent yield in the presence of NaOtBu as base and toluene as solvent.     

Original palladium pincer complexes deriving from 1,3-bis(thiophosphinoyl)indene proligands: C(sp3)-H versus C(sp2)-H bond activation

A series of original 2-indenylidene palladium pincer complexes {PdL[Ind(Ph(2)P==S)(2)]} (L = HNCy(2), PPh(3), Cl(-)) have been prepared by double C-H activation of a 1,3-bis(thiophosphinoyl)indene proligand. Crystallographic analyses and DFT calculations indicate that the bonding situation of the {Pd[Ind(Ph(2)P==S)(2)]} fragment is essentially governed by the conjugated and rigid nature of the dianionic pincer ligand, the nature of the coligand having little influence. The formation of the 2-indenylidene complexes involves either a 2-indenyl pincer or a four-membered cyclometalated complex as an intermediate, suggesting that C(sp(2))-H or C(sp(3))-H bond activation takes place. However, deuterium labelling experiences show that in all cases, C(sp(3))-H bond activation occurs followed eventually by a Pd/H exchange. Nevertheless, evidence for direct C(sp(2))-H bond activation under mild conditions is obtained when a methyl group is introduced at the indene proligand to prevent C(sp(3))-H bond activation. The ensuing dissymmetrical 2-indenyl palladium pincer complex has been fully characterized.     

Copper-catalyzed decarboxylative C(sp2)-C(sp3) coupling reactions via radical mechanism

We have successfully developed an example of copper-catalyzed decarboxylative C(sp(2))-C(sp(3)) coupling reactions via C-H functionalization for the first time. It is noteworthy that our catalytic system is very stable, low-cost, palladium-free, ligand-free, and easily accessible.     

Photochemically induced radical transformation of C(sp3)-H bonds to C(sp3)-CN bonds

A general protocol for direct transformation of unreactive C(sp(3))-H bonds to C(sp(3))-CN bonds has been developed. The C-H activation was effected by photoexcited benzophenone, and the generated carbon radical was subsequently trapped with tosyl cyanide to afford the corresponding nitrile in a highly efficient manner. The present methodology is widely applicable to versatile starting materials and, thus, serves as a powerful tool for selective one-carbon elongation for construction of architecturally complex molecules.     

Synthesis of polycyclic molecules by double C(sp2)-H/C(sp3)-H arylations with a single palladium catalyst

Polycyclic molecules were obtained in good yields by double C(sp(2))-H/C(sp(3))-H arylations mediated by a single palladium/phosphine catalyst. Both double intermolecular/intramolecular and intramolecular/intramolecular C-C couplings were performed successfully, which indicates that this concept has a broad applicability for the rapid construction of molecular complexity.     

Palladium-catalyzed silyl C(sp3)-H bond activation

The first transition-metal-catalyzed activation of silyl C(sp(3))-H bond was realized and synthetically applied. A variety of organic skeletons substituted with SiMe(3) groups could undergo the Pd-catalyzed intramolecular coupling reaction, resulting in an unprecedented synthetic method for yielding six-membered silacycles. It was found that the adjacent Si atom played an essential role for the activation of the C(sp(3))-H bond of the SiMe(3) group; no activation reaction of the C(sp(3))-H bond of the CMe(3) group took place under the same reaction conditions.     

Sequential protocol for C(sp3)-H carboxylation with CO2: transition-metal-catalyzed benzylic C-H silylation and fluoride-mediated carboxylation

One of the most challenging transformations in current organic chemistry is the catalytic carboxylation of a C(sp(3))-H bond using CO(2) gas, an inexpensive and ubiquitous C1 source. A sequential protocol for C(sp(3))-H carboxylation by employing a nitrogen-directed, metal-assisted, C-H activation/catalytic silylation reaction in conjunction with fluoride-mediated carboxylation with CO(2) was established. The carboxylation proceeded only at the benzylic C(sp(3))-Si bond, not at the aromatic C(sp(2))-Si, which is advantageous for further manipulations of the products.     

C(sp)-C(sp3) bond formation through Cu-catalyzed cross-coupling of N-tosylhydrazones and trialkylsilylethynes

Copper-catalyzed cross-coupling of N-tosylhydrazones with trialkylsilylethynes leads to the formation of C(sp)-C(sp(3)) bonds. Cu carbene migratory insertion is proposed to play the key role in this transformation.     

Palladium-catalyzed synthesis of benzosilolo[2,3-b]indoles via cleavage of a C(sp3)-Si bond and consequent intramolecular C(sp2)-Si coupling

An efficient process involving Pd-catalyzed selective cleavage of a C(sp(3))-Si bond and consequent intramolecular C(sp(2))-Si coupling has been developed, affording benzosilolo[2,3-b]indoles as a new type of silicon-bridged polyheteroarene in excellent yields. Aldehyde was found for the first time to be able to promote the efficiency of the catalytic process remarkably.     

Organocatalytic deprotonative functionalization of C(sp(2))-H and C(sp(3))-H bonds using in situ generated onium amide bases

Onium amides, generated in situ from the combination of aminosilanes and onium fluorides (R(4)PF, R(4)NF), are employed for the first time as bases for catalytic deprotonative functionalization of C(sp(2))-H and activated C(sp(3))-H bonds under mild conditions.     

Unexpected copper-catalyzed aerobic oxidative cleavage of C(sp3)-C(sp3) bond of glycol ethers

An unexpected Cu-catalyzed oxidative cleavage of the C(sp(3))-C(sp(3)) bond in glycol ethers by using air or molecular oxygen as the terminal stoichiometric oxidant is demonstrated. As a result, the corresponding α-acyloxy ethers and formates of 1,2-ethanediol are formed by direct coupling of carboxylic acids and aldehydes with glycol ethers under the reaction conditions. This method represents the first example of Cu-catalyzed aerobic cleavage of saturated C-C bond in ethers.     

Efficient alkyl ether synthesis via palladium-catalyzed, picolinamide-directed alkoxylation of unactivated C(sp3)-H and C(sp2)-H bonds at remote positions

We report the efficient synthesis of alkyl ethers by the functionalization of unactivated sp(3)- and sp(2)-hybridized C-H bonds. In the Pd(OAc)(2)-catalyzed, PhI(OAc)(2)-mediated reaction system, picolinamide-protected amine substrates undergo facile alkoxylation at the γ or δ positions with a range of alcohols, including t-BuOH, to give alkoxylated products. This method features a relatively broad substrate scope for amines and alcohols, inexpensive reagents, and convenient operating conditions. This method highlights the emerging value of unactivated C-H bonds, particularly the C(sp(3))-H bond of methyl groups, as functional groups in organic synthesis.     

Palladium-catalyzed amidation by chemoselective C(sp3)-H activation: concise route to oxindoles using a carbamoyl chloride precursor

Quite select: a new strategy was developed for the synthesis of various oxindoles from carbamoyl chlorides. Under the optimum reaction conditions, with Ad(2)PBu as a ligand, tBuCONHOH as an additive, and a CO atmosphere, selective C(sp(3))-H activation proceeded in the presence of a C(sp(2))-H bond. Ad=adamantyl.     

Cu-catalyzed oxidative C(sp2)-H cycloetherification of o-arylphenols for the preparation of dibenzofurans

A new process involving copper-catalyzed aerobic C(sp(2))-H activation, followed by cycloetherification, has been developed. This reaction serves as a direct method for the preparation of multisubstituted dibenzofurans starting with o-arylphenols. The presence of a strong para-electron-withdrawing group (e.g., NO(2)) on the phenol is essential for the success of the reaction.     

Metal catalyzed C(sp(3))-H bond amination of 2-alkyl azaarenes with diethyl azodicarboxylate

Metal-catalyzed direct C(sp(3))-H bond amination of 2-alkyl azaarenes with N[double bond, length as m-dash]N double bonds has been developed, which expands the scope of C(sp(3))-H bond activation reactions and provides a new access to medicinally important azaarene derivatives.     

Cubane-type heterometallic sulfido clusters: incorporation of two metal fragments into a dinuclear ReS(mu-S)2ReS core affording bimetallic M2Re2(mu 3-S)4 clusters (M = Ru,Pt, Cu) or trimetallic MM'Re2(mu 3-S)4 clusters via incomplete cubane-type MRe2(mu 3-S)(mu 2-S)3 intermediates (M = Ru,Rh, Ir; M' = Mo,W, Pd,Ru, Rh)

Reactions of a dirhenium tetra(sulfido) complex [PPh(4)](2)[ReS(L)(mu-S)(2)ReS(L)] (L = S(2)C(2)(SiMe(3))(2)) with a series of group 8-11 metal complexes in MeCN at room temperature afforded either the cubane-type clusters [M(2)(ReL)(2)(mu(3)-S)(4)] (M = CpRu (2), PtMe(3), Cu(PPh(3)) (4); Cp = eta(5)-C(5)Me(5)) or the incomplete cubane-type clusters [M(ReL)(2)(mu(3)-S)(mu(2)-S)(3)] (M = (eta(6)-C(6)HMe(5))Ru (5), CpRh (6), CpIr (7)), depending on the nature of the metal complexes added. It has also been disclosed that the latter incomplete cubane-type clusters can serve as the good precursors to the trimetallic cubane-type clusters still poorly precedented. Thus, treatment of 5-7 with a range of metal complexes in THF at room temperature resulted in the formation of novel trimetallic cubane-type clusters, including the neutral clusters [[(eta(6)-C(6)HMe(5))Ru][W(CO)(3)](ReL)(2)(mu(3)-S)(4)], [(CpM)[W(CO)(3)](ReL)(2)(mu(3)-S)(4)] (M = Rh, Ir), [(Cp*Ir)[Mo(CO)(3)](ReL)(2)(mu(3)-S)(4)], [[(eta(6)-C(6)HMe(5))Ru][Pd(PPh(3))](ReL)(2)(mu(3)-S)(4)], and [(Cp*Ir)[Pd(PPh(3))](ReL)(2)(mu(3)-S)(4)] (13) along with the cationic clusters [(Cp*Ir)(CpRu)(ReL)(2)(mu(3)-S)(4)][PF(6)] (14) and [(Cp*Ir)[Rh(cod)](ReL)(2)(mu(3)-S)(4)][PF(6)] (cod = 1,5-cyclooctadiene). The X-ray analyses have been carried out for 2, 4, 7, 13, and the SbF(6) analogue of 14 (14') to confirm their bimetallic cubane-type, bimetallic incomplete cubane-type, or trimetallic cubane-type structures. Fluxional behavior of the incomplete cubane-type and trimetallic cubane-type clusters in solutions has been demonstrated by the variable-temperature (1)H NMR studies, which is ascribable to both the metal-metal bond migration in the cluster cores and the pseudorotation of the dithiolene ligand bonded to the square pyramidal Re centers, where the temperatures at which these processes proceed have been found to depend upon the nature of the metal centers included in the cluster cores.     

Pinene-derived iminodiacetic acid (PIDA): a powerful ligand for stereoselective synthesis and iterative cross-coupling of C(sp3) boronate building blocks

Efficient access to chiral C(sp(3)) boronates in stereochemically pure form is critical for realizing the substantial potential of such building blocks in complex-molecule synthesis. We herein report that a pinene-derived iminodiacetic acid (PIDA) ligand enables the highly diastereoselective synthesis of a wide range of oxiranyl C(sp(3)) boronates from the corresponding olefins. These oxiranyl PIDA boronates, in turn, can be readily transformed into unprecedented stable α-boryl aldehydes via a novel 1,2-migration of the boronate group that proceeds with complete maintenance of stereochemical purity. B-Protected haloboronic acids containing dual sp(3)-hybridized C centers are readily accessible via this platform, and the herein demonstrated capacity for stereocontrolled iterative C(sp(3)) cross-coupling with this novel type of bifunctional reagent to access a medicinally important chiral small-molecule target in highly enantioenriched form represents a substantial advance for the building-block-based approach to synthesis.     

Catalysis by Platinum(II) Iodo Complexes of C(sp2)–C(sp2) Electrophile Coupling

Kinetics and Catalysis - The catalytic C(sp2)–C(sp2) coupling of vinyl iodide was performed to form 1,3-butadiene in the PtII–NaI–С2Н3I–acetone-D6 system at...