Determination of molecular line parameters for acrolein (C(3)H(4)O) using infrared tunable diode laser absorption spectroscopy

Acrolein (C(3)H(4)O) molecular line parameters, including infrared (IR) absorption positions, strengths, and nitrogen broadened half-widths, must be determined since they are not included in the high resolution transmission (HITRAN) molecular absorption database of spectral lines. These parameters are required for developing a quantitative analytical method for measuring acrolein in a single puff of cigarette smoke using tunable diode laser absorption spectroscopy (TDLAS). The task is complex since acrolein has many highly overlapping infrared absorption lines in the room temperature spectrum and the cigarette smoke matrix contains thousands of compounds. This work describes the procedure for estimating the molecular line parameters for these overlapping absorption lines in the wavenumber range (958.7-958.9 cm(-1)) using quantitative reference spectra taken with the infrared lead-salt TDLAS instrument at different pressures and concentrations. The nitrogen broadened half-width for acrolein is 0.0937 cm(-1)atm(-1) and to our knowledge, is the first time it has been reported in the literature.     

Vibrational spectroscopic study of the antimonate mineral bindheimite Pb2Sb2O6(O,OH)

Raman spectroscopy complimented with infrared spectroscopy has been used to characterise the antimonate mineral bindheimite Pb₂Sb₂O₆(O,OH). The mineral is characterised by an intense Raman band at 656 cm⁻¹ assigned to SbO stretching vibrations. Other lower intensity bands at 664, 749 and 814 cm⁻¹ are also assigned to stretching vibrations. This observation suggests the non-equivalence of SbO units in the structure. Low intensity Raman bands at 293, 312 and 328 cm⁻¹ are assigned to the OSbO bending vibrations. Infrared bands at 979, 1008, 1037 and 1058 cm⁻¹ may be assigned to δOH deformation modes of SbOH units. Infrared bands at 1603 and 1640 cm⁻¹ are assigned to water bending vibrations, suggesting that water is involved in the bindheimite structure. Broad infrared bands centred upon 3250 cm⁻¹ supports this concept. Thus the true formula of bindheimite is questioned and probably should be written as Pb₂Sb₂O₆(O,OH,H₂O).     

Vibrational spectroscopic study of the arsenate mineral strashimirite Cu8(AsO4)4(OH)4·5H2O—Relationship to other basic copper arsenates

The basic copper arsenate mineral strashimirite Cu₈(AsO₄)₄(OH)₄·5H₂O from two different localities has been studied by Raman spectroscopy and complemented by infrared spectroscopy. Two strashimirite mineral samples were obtained from the Czech (sample A) and Slovak (sample B) Republics. Two Raman bands for sample A are identified at 839 and 856 cm⁻¹ and for sample B at 843 and 891 cm⁻¹ are assigned to the ν₁ (AsO₄³⁻) symmetric and the ν₃ (AsO₄³⁻) antisymmetric stretching modes, respectively. The broad band for sample A centred upon 500 cm⁻¹, resolved into component bands at 467, 497, 526 and 554 cm⁻¹ and for sample B at 507 and 560 cm⁻¹ include bands which are attributable to the ν₄ (AsO₄³⁻) bending mode. In the Raman spectra, two bands (sample A) at 337 and 393 cm⁻¹ and at 343 and 374 cm⁻¹ for sample B are attributed to the ν₂ (AsO₄³⁻) bending mode. The Raman spectrum of strashimirite sample A shows three resolved bands at 3450, 3488 and 3585 cm⁻¹. The first two bands are attributed to water stretching vibrations whereas the band at 3585 cm⁻¹ to OH stretching vibrations of the hydroxyl units. Two bands (3497 and 3444 cm⁻¹) are observed in the Raman spectrum of B. A comparison is made of the Raman spectrum of strashimirite with the Raman spectra of other selected basic copper arsenates including olivenite, cornwallite, cornubite and clinoclase.     

Crystal-field analysis of low-temperature UCl3 and UBr3 absorption spectra

High-resolution absorption spectra of thin films of UCl₃ and UBr₃ have been measured at 4.2 K in the 4000–30 000 cm⁻¹ range. The determined crystal-field lines were used in a computational analysis employing free-ion operators, one-electron crystal-field operators as well as two-particle correlation crystal-field operators. The performed analysis enabled the determination of the Hamiltonian parameters and an unambiguous assignment of 57 and 46 crystal-field levels with a mean error of 31 cm⁻¹ for UCl₃ and UBr_3, respectively.     

IR-analysis of H-bonded H2O on the pure TiO2 surface

The surface state of optically pure polydisperse TiO₂ (anatase and rutile) was determined by infra-red (IR) spectroscopy analysis in the temperature range of 100–453 K. Anatase A300 spectrum, contrary to rutile R300 one, has a broad three-component absorption band with peaks at 1048, 1137 and 1222 cm⁻¹ in the spectral range of δ(Ti–O–H) deformation vibrations. For rutile R300 we observed a very weak band at 1047 cm⁻¹, and for the thermal treated rutile R900 these bands were not appeared at all. The analysis of temperature dependencies for the mentioned absorption bands revealed the spectral shift of 1222 cm⁻¹ band towards the high frequencies, when the temperature increased, but the spectral parameters of 1137 and 1048 cm⁻¹ bands remained the same. The temperature of 1222 cm⁻¹ band maximum shift was 373–393 K and correlated with DSC data. Obtained results allowed to assign 1222 cm⁻¹ band to the deformation vibrations of OH-groups, bounded to the surface adsorbed water molecules by weak hydrogen bonds (5 kcal/mol). During the temperature growth these molecules desorbed, which also resulted in the intensity decreasing of stretching OH-groups vibration IR-bands at 3420 cm⁻¹. The destruction and desorption of surface water complexes led to Ti–O–H bond strengthening. IR bands at 1137 and 1048 cm⁻¹ were attributed to the stronger bounded adsorbed water molecules, which are also characterized with stretching OH-groups vibration bands at 3200 cm⁻¹. These surface structure were additionally stabilized by hydrogen bonds with the neighbouring TiO₂ lattice anions and other OH-groups, and desorbed at higher temperatures.     

Determination of molecular parameters for 1,3-butadiene and propylene using infrared tunable diode laser absorption spectroscopy

A technique has been developed for the determination of molecular parameters, including infrared absorption line positions, strengths, and nitrogen-broadened half-widths for 1,3-butadiene (C(4)H(6)) and propylene (C(3)H(6)). The parameters for these two molecules are required for quantitation using Tunable Diode Laser Absorption Spectroscopy (TDLAS). These molecules have populations of highly overlapping infrared absorption lines in their room temperature spectra. The technique reported here provides a procedure for estimating the molecular parameters for these overlapping absorption lines from quantitative reference spectra taken with the TDLAS instrument at different pressures and concentrations. The system was developed for the quantitation of gaseous constituents in a single puff of cigarette smoke and this paper will describe the procedure and some of the factors that influence the accuracy of quantitation for 1,3-butadiene, including the approach taken to minimize the adverse effects of the absorption due to propylene in the same spectral region.     

Sr2NiMoO6−δ as anode material for LaGaO3-based solid oxide fuel cell

The double-perovskite Sr₂NiMoO_6−δ (SNMO) was investigated as an anode material of a solid oxide fuel cell (SOFC). With a 300 μm thick La_0.9Sr_0.1Ga_0.8Mg_0.2O_3−σ (LSGM) disk as electrolyte and Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ as the cathode, the SNMO anode showed power densities of 819 mW cm⁻² in hydrogen at 1123 K. Moreover, there was no buffer layer between anode and electrolyte, which would reduce design techniques and save design cost. After test no chemical reaction was discovered between anode and electrolyte. The anode exhibited good conductivity and the value was around 60 S cm⁻¹ in H₂. Also it had almost linear thermal expansion from room temperature to 1253 K and the average thermal expansion coefficient was about 12.14 × 10⁻⁶ K⁻¹, which was quite close to that of La_0.9Sr_0.lGa_0.8Mg_0.2O₃ (12.17 × 10⁻⁶ K⁻¹) electrolyte.     

Measurement of acrolein and 1,3-butadiene in a single puff of cigarette smoke using lead-salt tunable diode laser infrared spectroscopy

Acrolein and 1,3-butadiene in cigarette smoke generally are measured using two separate analytical methods, a carbonyl derivative HPLC method for acrolein and a volatile organic compound (VOC) GC/MS method for 1,3-butadiene. However, a single analytical method having improved sensitivity and real-time per puff measurement will offer more specific information for evaluating experimental carbon filtered cigarettes designed to reduce the smoke deliveries of these constituents. This paper describes an infrared technique using two lead-salt tunable diode lasers (TDLs) operating with liquid nitrogen cooling with emissions at 958.8 cm(-1) and 891.0 cm(-1) respectively for the simultaneous measurement of acrolein and 1,3-butadiene, respectively, in each puff of mainstream cigarette smoke in real time. The dual TDL system uses a 3.1l volume, 100 m astigmatic multiple pass absorption gas cell. Quantitation is based on a spectral fit that uses previously determined infrared molecular line parameters generated in our laboratory, including line positions, line strengths and nitrogen-broadened half-widths for these species. Since acrolein and ethylene absorption lines overlap and 1,3-butadiene, ethylene and propylene absorption lines overlap, the per puff deliveries of ethylene and propylene were determined since their overlapping absorption lines must be taken into account by the spectral fit. The acrolein and 1,3-butadiene total cigarette deliveries for the 1R5F Kentucky Reference cigarette were in agreement with the HPLC and GC/MS methods, respectively. The limit of detection (LOD) for 1,3-butadiene and acrolein was 4 ng/puff and 24 ng/puff, respectively, which is more than adequate to determine at which puff they break through the carbon filter. The retention and breakthrough behavior for the two primary smoke constituents depend on the cigarette design and characteristics of the carbon filter being evaluated.     

Comparative study of the spectroscopic properties of Cr-doped LiAlO2 and LiGaO2

A detailed spectroscopic study of the optical characteristics of the tetrahedrally coordinated Cr⁴⁺ ion in LiAlO₂ and LiGaO₂ is given. From absorption and excitation measurements the crystal field parameter Dq and the Racah parameter B were determined to be Dq=1065 cm⁻¹, B=450 cm⁻¹, and Dq/B=2.4 for LiAlO₂ and Dq=1055 cm⁻¹, B=428 cm⁻¹, and Dq/B=2.5 for LiGaO₂. For the Racah parameter C only a lower limit can be given, i.e. 2417 cm⁻¹ for LiAlO₂ and 2667 cm⁻¹ for LiGaO₂. Due to the strong crystal field splitting — caused by the low site symmetry — the ³B(³T₂) crystal field component is the metastable and thus the emitting level. In the low-temperature absorption and emission spectra the expected three spin–orbit components of the ³B level are found at 8273, 8296, and 8300 cm⁻¹ for Cr⁴⁺:LiAlO₂ and 8610, 8623, and 8632 cm⁻¹ for Cr⁴⁺:LiGaO₂. The emission lifetime of Cr⁴⁺ in LiAlO₂ is 95 μs at 10 K and single exponential. In Mg-codoped LiAlO₂ and in LiGaO₂ the Cr⁴⁺ decay is double exponential. In Cr,Mg:LiAlO₂ two centers can be clearly distinguished, while in Cr:LiGaO₂ a variety of centers are observed, probably due to different charge compensation processes between Li, Ga, and Cr. The quantum efficiencies at room temperature are 42% for Cr:LiAlO₂ and 23% for Cr:LiGaO₂. Already at low temperature nonradiative decay processes occur. The temperature dependence of the lifetimes were analyzed with the model of Struck and Fonger. Excited state absorption measurements indicate that in the spectral region of the emission the excited state absorption cross-section is larger than the stimulated emission cross-section. Therefore laser oscillation is unlikely in these systems.     

Reactions of CO2 with H, H2 and deuterated analogues

Combining a temperature variable 22-pole ion trap with a cold effusive beam of neutrals, rate coefficients k(T) have been measured for reactions of CO₂⁺ ions with H, H₂ and deuterated analogues. The neutral beam which is cooled in an accommodator to T_ACC, penetrates the trapped ion cloud with a well-characterized velocity distribution. The temperature of the ions, T_22PT, has been set to values between 15 and 300 K. Thermalization is accelerated by using helium buffer gas. For reference, some experiments have been performed with thermal target gas. For this purpose hydrogen is leaked directly into the box surrounding the trap. While collisions of CO₂⁺ with H₂ lead exclusively to the protonated product HCO₂⁺, collisions with H atoms form mainly HCO⁺. The electron transfer channel H⁺ + CO₂ could not be detected (<20%). Equivalent studies have been performed for deuterium. The rate coefficients for reactions with atoms are rather small. Within our relative errors of less than 15%, they do not depend on the temperature of the CO₂⁺ ions nor on the velocity of the atoms (k(T) lays between 4.5 and 4.7 × 10⁻¹⁰ cm³ s⁻¹ with H as target, and 2.2 × 10⁻¹⁰ cm³ s⁻¹ with D). For collisions with molecules, the reactivity increases significantly with falling temperature, reaching the Langevin values at 15 K. These results are reported as k = α (T/300 K)^β with α = 9.5 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.15 for H₂ and α = 4.9 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.30 for D₂.     

Determination of deep trapping center parameters in as-grown Tl2Ga2S3Se layered crystals

Thermally stimulated current measurements were carried out on as-grown Tl₂Ga₂S₃Se layered single crystals. The investigations were performed in temperatures ranging from 10 to 320 K with heating rates of 0.6–1.2 K s⁻¹. The analysis of the data revealed the hole trap level located at 498 meV. The activation energies of the traps have been determined using various methods of analysis, and they agree with each other. The calculation for these traps yielded 2.1 × 10⁻¹⁸ cm² for capture cross-section and 2.3 × 10⁹ cm⁻³ for the concentration. It was concluded that in this center retrapping was negligible, as confirmed by the good agreement between the experimental results and the theoretical predictions of the model that assumes slow retrapping.     

EPR and optical absorption studies of Cr ions in d-gluconic acid monohydrate

EPR studies are carried out on Cr³⁺ ions doped in d-gluconic acid monohydrate (C₆H₁₂O₇·H₂O) single crystals at 77 K. From the observed EPR spectra, the spin Hamiltonian parameters g, |D| and |E| are measured to be 1.9919, 349 (×10⁻⁴) cm⁻¹ and 113 (×10⁻⁴) cm⁻¹, respectively. The optical absorption of the crystal is also studied at room temperature. From the observed band positions, the cubic crystal field splitting parameter Dq (2052 cm⁻¹) and the Racah interelectronic repulsion parameter B (653 cm⁻¹) are evaluated. From the correlation of EPR and optical data the nature of bonding of Cr³⁺ ion with its ligands is discussed.     

Nanocrystalline ZnMn2O4 as a novel lithium-storage material

Nanocrystalline ZnMn₂O₄ is prepared by a polymer-pyrolysis route and used as a novel anode for lithium ion batteries. XRD and HRTEM studies reveal that the products are highly phase-pure and 30–60 nm in size. Galvanostatic cycling of ZnMn₂O₄ electrode at 100 mA g⁻¹ (about 0.52 mA cm⁻²) between 0.01 and 3.0 V up to 50 cycles exhibits almost stable cycling performance between 10 and 50 cycles with only an average capacity fade of 0.20% per cycle and the electrode still maintains a capacity of 569 mAh g⁻¹ after 50 cycles.     

High performance protonic ceramic membrane fuel cells (PCMFCs) with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

Protonic ceramic membrane fuel cells (PCMFCs) based on proton-conducting electrolytes have attracted much attention because of many advantages, such as low activation energy and high energy efficiency. BaZr_0.1Ce_0.7Y_0.2O_3−δ (BZCY7) electrolyte based PCMFCs with stable Ba_0.5Sr_0.5Zn_0.2Fe_0.8O_3−δ (BSZF) perovskite cathode were investigated. Using thin membrane BZCY7 electrolyte (about 15 μm in thickness) synthesized by a modified Pechini method on NiO-BZCY7 anode support, PCMFCs were assembled and tested by selecting stable BSZF perovskite cathode. An open-circuit potential of 1.015 V, a maximum power density of 486 mW cm⁻², and a low polarization resistance of the electrodes of 0.08 Ω cm² was achieved at 700 °C. The results have indicated that BZCY7 proton-conducting electrolyte with BSZF cathode is a promising material system for the next generation solid oxide fuel cells.     

Ni + B2H6: Spectroscopic observations on NiB and NiH

An electronic spectrum of the nickel monoboride radical has been observed for the first time, in a reaction between a nickel plasma and diborane. Numerous bands of ⁵⁸Ni¹⁰B and ⁵⁸Ni¹¹B have been recorded between 442 and 503 nm in laser-induced fluorescence (LIF). Dispersed fluorescence experiments have also been performed. The LIF spectrum is dominated by a strong progression of bands of a [19.7]²Σ⁺–X²Σ⁺ transition. Analyses have been carried out to yield the following ⁵⁸Ni¹¹B ground state parameters: r₀ = 0.1698 nm, ω_e = 778 cm⁻¹, ω_ex_e = 4.9 cm⁻¹. Strong signals from NiH have also been observed.     

Time-resolved Fourier transform infrared emission spectroscopy of laser ablation products

Time-resolved Fourier transform infrared spectroscopy was applied for observations of emission spectra from ablation products induced by a Nd:YLF laser with a 2.5 kHz repletion rate. The infrared emission spectra from Fe, Cu, Zn, and Al atoms were observed in the 2.5–5 μm region. The observed emission spectrum from iron ablation in the 2500 cm⁻¹ region agrees very well with solar absorption spectrum, where new lines have been detected in the present experiment in addition to the lines observed from a hollow cathode discharge. When O₂ was added to the carbon ablation, emissions from vibrationally excited CO were observed with non-equilibrium vibrational distribution.     

Molecular miscible blend of poly(2-cyano-1,4-phenyleneterephthalamide) and polyvinylpyrrolidone characterized by two-dimensional correlation FTIR and solid state C NMR spectroscopy

Miscibility of blends of poly(2-cyano-1,4-phenyleneterephthalamide/polyvinylpyrrolidone) (CN-PPTA/PVP) was investigated by dilute solution viscometry, two-dimensional (2D) correlation Fourier transformed infrared (FTIR) spectroscopy and solid state ¹³C NMR spectroscopy. It was shown that a large proportion of the PVP, the water-soluble component, could not be removed from CN-PPTA by extraction with water, and even with boiling water for blend films, suggesting that the flexible aliphatic PVP chain forms a blend with the rigid aromatic CN-PPTA chain through strong intermolecular interaction making it too difficult to dissolve even in boiling water. Viscometry on a polymer mixture of dilute solution showed that [η]_exp exhibited larger value than [η]_theo in all mixtures used in this experiment, suggesting occurrence of a strong attractive interaction between the two polymers. 2D correlation FTIR spectroscopy revealed that the carbonyl absorption band of PVP at 1675 cm⁻¹ shifted to a new low frequency absorption band at 1640 cm⁻¹ with a change of 35 cm⁻¹, suggesting strong hydrogen bonding with NH (amide II) proton of CN-PPTA. Another new absorption band at 1685 cm⁻¹ was due to the carbonyl absorption band of CN-PPTA shifting to a higher frequency than that at 1662 cm⁻¹, indicating that some of the carbonyl groups in the CN-PPTA components of the blends were in a free state or in a non-hydrogen bonded state as a consequence of the participation of NH proton of CN-PPTA in hydrogen bonding, resulting in the absorption bands of NH bend deformation of CN-PPTA at 1542 and 1313 cm⁻¹ being shifted to higher wavenumber of 1556 and 1324 cm⁻¹, respectively. Solid state ¹³C NMR spectroscopy revealed a chemical shift for CO of the PVP component in the blend fiber changing down-field (shift to left) at 177.346 ppm with a difference of 1.812 ppm; this was due to a lower electron density around the carbon atom of CO of lactam via hydrogen bonding with NH proton of amide in the CN-PPTA component, suggesting that a homogeneous blend of the CN-PPTA and PVP was produced on a molecular scale via hydrogen bonding.     

The B1 ← A1 absorption system of NO2 in Xe matrices: evidence for Renner—Teller interaction

A tentative vibrational assignment of the ²B₁ ← ²A₁ absorption system of NO₂ in solid Xe is reported. About 65 bands were analysed, yielding normal vibration energies of ν₁ = 1230, ν₂ = 450 and ν₃ = 2040 cm⁻¹. The electronic transition energy can be estimated to be T₀₁₀ = 14160 cm⁻¹ (14220 cm⁻¹ for the gaseous phase). These observations are in good agreement with predictions made using ab initio calculations. Evidence for Renner—Teller interaction is documented by a systematic staggering of frequency intervals between successive bands in the ν₂ progression of the state.     

Modifying bipolar membranes with palygorskite and FeCl3

To explore a more function-stable and energy-efficient bipolar membrane, palygorskite and FeCl₃ were added at the intermediate layer as water-splitting catalysts. As proven, the two materials have a synergetic effect on water splitting. Particularly, the bipolar membrane modified with 5 g dm⁻³ palygorskite and 0.005 mol dm⁻³ FeCl₃ can achieve a voltage drop of 0.68 V at 100 mA cm⁻² and loses only 14.7 μg of Fe after an electrodialysis operation at 100 mA cm⁻² for 660 min. Obviously, palygorskite can protect ferric ions from significant loss, which makes the membrane stable in the performance of water splitting. Nevertheless, how palygorskite immobilizes ferric ions is still under investigation.     

Dinitrogen and carbon monoxide hydrogen bonding in protonic zeolites: Studies from variable-temperature infrared spectroscopy

Adsorption (at a low temperature) of nitrogen on the protonic zeolite H-Y results in hydrogen bonding of the adsorbed N₂ molecules with the zeolite Si(OH)Al Brønsted-acid groups. This hydrogen-bonding interaction leads to activation, in the infrared, of the fundamental N–N stretching mode, which appears at 2334 cm⁻¹. From infrared spectra taken over a temperature range, the standard enthalpy of formation of the OH···N₂ complex was found to be ΔH⁰ = −15.7(±1) kJ mol⁻¹. Similarly, variable-temperature infrared spectroscopy was used to determine the standard enthalpy change involved in formation of H-bonded CO complexes for CO adsorbed on the zeolites H-ZSM-5 and H-FER; the corresponding values of ΔH⁰ were found to be −29.4(±1) and −28.4(±1) kJ mol⁻¹, respectively. The whole set of results was analysed in the context of other relevant data available in the literature.