Dynamic and collective electrochemical responses of tetrathiafulvalene derivative self-assembled monolayers

Electroactive tetrathiafulvalene (TTF)-containing alkanethiol self-assembled monolayers (SAMs) were designed and synthesized to elucidate the relationship between electrochemical responses and film structures. Two TTF derivative molecules having one alkanethiol chain (1) and two alkanethiol chains (2) were utilized to modulate the molecular packing arrangements in the SAMs, and the formation and structure of the SAMs were characterized by surface plasmon resonance spectroscopy (SPR). SPR measurements in various contacting media demonstrated loose packing of SAM 1 and close packing of SAM 2 due to the different space fillings of the molecules. Two successive one-electron redox waves were observed for both SAMs by cyclic voltammetry. The peak widths of the redox waves were strongly dependent on the oxidation states of the TTF moieties, the packing arrangement of the SAMs, and the contacting medium. We found that TTF-based SAMs exhibited collective electrochemical responses induced by dynamic structural changes, depending on the degree of freedom for the component molecules in the SAMs. These results imply that the molecular design, taking into account the electrochemical responses, extends the available range of molecular-based functionalities in TTF-based SAMs.     

Strong intermolecular electronic coupling within a tetrathiafulvalene island embedded in self-assembled monolayers

Electroactive tetrathiafulvalene thiol, specially designed to pursue an intermolecular electronic coupling, was embedded in an n-alkanethiol SAM matrix as islands and was studied under potential control using in situ scanning tunneling microscopy. The apparent height of the islands increased with the island size, irrespective of the oxidation state of the tetrathiafulvalene backbones. This behavior can be rationalized on the basis of the strong intermolecular electronic coupling that creates efficient intermolecular conduction paths.     

Intramolecular charge-transfer interactions in pi-extended tetrathiafulvalene derivatives

New electron-donor (D)-electron-acceptor (A) TTF architectures are presented in which two electron-donating 1,3-dithiole moieties are connected by a pi bridge to the weak electron-accepting quinoxaline moiety (D-pi-A compounds 9a and 9b and also two 1,3-dithiole-2-ylidene moieties are connected by a pi bridge to the electron-accepting thieno[3,4-b]quinoxaline bridge (D-pi-A-pi-D compounds 12a-c). There are through-bond intramolecular charge-transfer (ICT) interactions, predicted in theoretical calculations, and confirmed by UV-vis spectroscopy and cyclic voltammetry measurements. This work constitutes the first use of quinoxalines as electron-accepting moieties in D-pi-A compounds.     

Intermolecular interactions of punicin derivatives

The 2- and 4-methyl derivates of punicin [N-(2′,5′-dihydroxyphenyl)-pyridinium chloride] were subjected to Knoevenagel reactions. Starting materials as well as reaction products were examined with respect to homo and hetero-intermolecular interactions. It was found that N-(2′,5′-dihydroxyphenyl)-2-methylpyridinium chloride forms a stable 2:1 complex to hydroquinone. Decomplexation can be accomplished by anion exchange to tetraphenylborate, or by competing complexation with p-benzoquinone. Results of three single crystal X-ray analyses as well as NMR titrations and dilution experiments are presented.     

偶氮苯衍生物自组装单分子膜中的分子取响

利用反射红外光谱研究了金表面一系列具有不同碳链长度的偶氮苯巯基衍生物的自组装单分子膜.通过对比各向同性样品的透射谱和单分子膜的反射谱中各个吸收峰强度,定量地研究了分子中各部分的取向与分子结构的关系.我们分别提出了烷基链和偶氮基团取向计算的方法,利用该方法成功地求得了分子中各部分在膜的倾角.结果显示,当分子中烷基链长度增大时,碳链和偶氮苯基团相对于法线的倾斜逐渐加剧.这种倾角的变化归因于分子中碳链间范德华引力增大时,引起分子逐渐倾斜以达到最佳的范德华接触.同时研究发现,烷基链和偶氮基团受碳长度变化的影响并不相同.当分子中亚甲基数目增多时,烷基链的倾角迅速增大而偶氮苯倾角的增大则相对缓慢,这反映了它们在空间需求和本身刚性上的不同。     

Dipole-dipole interactions and the structure of self-assembled monolayers

The structure of self-assembled monolayers (SAMs) on the gold (111) surface is still a matter of debate despite a considerable experimental and theoretical effort. We address the problem from a new perspective, studying the influence of electrostatic interactions on the degree of disorder in COOH-terminated SAMs. We show that the HS(CH2)(n-1)COOH molecules carry two dipole moments associated with their head- and tail-groups. Depending on the coupling of these dipole moments along the molecules, the structure of the COOH-SAMs either resembles the structure of the corresponding alkanethiol monolayers (short molecules, strong dipole coupling) or shows a more complex behavior (long molecules, weak dipole coupling). In the latter case, the monolayer exhibits a crystalline-like order with respect to the hydrocarbon chains and a high degree of disorder with respect to the carboxylic head-groups. These results resolve the controversy of experimental data on the degree of order in COOH-monolayers with near-edge X-ray absorption fine structure spectroscopy (Himmel, H.-J.; Weiss, K.; J?ger, B.; Dannenberger, O.; Grunze, M.; W?ll, Ch. Langmuir 1997, 13, 4943), probing the tail-groups, showing that the monolayer is largely disordered, and the infrared data (Nuzzo, R. G.; Dubois, L. H.; Allara, D. L. J. Am. Chem. Soc. 1990, 112, 558) on the C-H stretching modes suggesting a crystalline-like order of the hydrocarbon chains.     

pH-Dependent rectification in self-assembled monolayers based on electrostatic interactions

Asymmetric electrostatic interactions dependent on pH between the redox molecules and the terminal group on the top of the self-assembled monolayer (SAM) afford control of the electron transfer property of the SAM having the imidazole terminal group.     

Host-guest interactions at self-assembled monolayers of cyclodextrins on gold

We have developed synthesis routes for the introduction of short and long dialkylsulfides onto the primary side of alpha-, beta-, and gamma-cyclodextrins. Monolayers of these cyclodextrin adsorbates were characterized by electrochemistry, wettability studies, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and atomic force microscopy (AFM). The differences in thickness and polarity of the outerface of the monolayers were measured by electro-chemistry and wettability studies. On average about 70% of the sulfide moieties were used for binding to the gold, as measured by XPS. Tof-SIMS measurements showed that the cyclodextrin adsorbates adsorb without any bond breakage. AFM measurements revealed for beta-cyclodextrin monolayers a quasi-hexagonal lattice with a lattice constant of 20.6 A, which matches the geometrical size of the adsorbate. The alpha-cyclodextrin and gamma-cyclodextrin monolayers are less ordered. Interactions of the anionic guests 1-anilinonaphthalene-8-sulfonic acid (1,8-ANS) and 2-(p-toluidinyl)naphthalene-6-sulfonic acid (2,6-TNS) and the highly ordered monolayers of heptapodant beta-cyclodextrin adsorbates were studied by surface plasmon resonance (SPR) and electrochemical impedance spectroscopy. The SPR measurements clearly showed interactions between a beta-cyclodextrin monolayer and 1,8-ANS. Electrochemical impedance spectroscopy measurements gave high responses even at low guest concentrations (< or = 5 microM). The association constant for the binding of 1,8-ANS (K = 289,000 +/- 13,000M-1) is considerably higher than the corresponding value in solution. (Partial) methylation of the secondary side of the beta-cyclodextrin strongly decreases the binding.     

Intermolecular interactions in electroactive thiol monolayers probed by linear scan voltammetry

1. Download : Download high-res image (162KB)
2. Download : Download full-size image

     

Functionalized self-assembled monolayers for measuring single molecule lectin carbohydrate interactions

The specific interactions between sugar-binding proteins (lectins) and their complementary carbohydrates mediate several complex biological functions. There is a great deal of interest in uncovering the molecular basis of these interactions. In this study, we demonstrate the use of an efficient one-step amination reaction strategy to fabricate carbohydrate arrays based on mixed self-assembled monolayers. These allow specific lectin carbohydrate interactions to be interrogated at the single molecule level via AFM. The force required to directly rupture the multivalent bonds between Concanavalin A (Con A) and mannose were subsequently determined by chemical force microscopy. The mixed self-assembled monolayer provides a versatile platform with active groups to attach a 1-amino-1-deoxy sugar or a protein (Con A) while minimizing non-specific adhesion enabling quick and reliable detection of rupture forces. By altering the pH of the environment, the aggregation state of Con A was regulated, resulting in different dominant rupture forces, corresponding to di-, tri- and multiple unbinding events. We estimate the value of the rupture force for a single Con A-mannose bond to be 95 ± 10 pN. The rupture force is consistent even when the positions of the binding molecules are switched. We show that this synthesis strategy in conjunction with a mixed SAM allows determination of single molecules bond with high specificity, and may be used to investigate lectin carbohydrate interactions in the form of carbohydrate arrays as well as lectin arrays.     

1H fast MAS NMR studies of hydrogen-bonding interactions in self-assembled monolayers

The structures formed by the adsorption of carboxyalkylphosphonic acids on metal oxides were investigated by (1)H fast magic angle spinning (MAS), heteronuclear correlation (HETCOR), and (1)H double-quantum (DQ) MAS solid-state NMR experiments. The diacids HO(2)C(CH(2))(n)PO(3)H(2) (n = 2, 3, 11, and 15) were adsorbed on TiO(2) and two types of ZrO(2) powders having average particle sizes of 20, 30, and 5 nm, respectively. Carboxyalkylphosphonic acids bind selectively via the phosphonate group, forming monolayers with pendant carboxylic acid groups. Whereas dipolar coupled P-OH protons are detected on TiO(2), there are only isolated residual P-OH groups on ZrO(2), reflecting the relative binding strengths of phosphonic acids on these two substrates. From a comparative (1)H MAS NMR study with an analogous monolayer system, HO(2)C(CH(2))(7)SH coated gold nanoparticles, the hydrogen-bonding network at the monolayer/air interface is found to be quite disordered, at least for SAMs deposited on nonplanar substrates. Whereas only hydrogen-bonded homodimers occur in the bulk diacids, hydrogen bonding between the carboxylic and phosphonic acid groups is present in multilayers of the diacids on the ZrO(2) nanopowder.     

Intermolecular interactions in heteromolecular crystals of tetrazine derivatives with azoles

Heteromolecular crystal structures formed by symmetrically and unsymmetrically 3,6-disubstituted tetrazine derivatives with NH donor azoles are investigated. The main crystal motifs and the intermolecular interactions responsible for their formation are identified.     

Immobilization of gold nanorods onto acid-terminated self-assembled monolayers via electrostatic interactions

We report the immobilization of gold nanorods onto self-assembled monolayers (SAMs) of 16-mercaptohexadecanoic acid (16-MHA). The simple two step protocol involves formation of a SAM of 16-MHA molecules onto gold-coated glass slides and subsequent immersion of these slides into the gold nanorod solution. The nanorods, formed by a seed-mediated, surfactant-assisted synthesis protocol, are stabilized in solution due to surface modification by the surfactant cetyltrimethylammonium bromide (CTAB). Attractive electrostatic interactions between the carboxylic acid group on the SAM and the positively charged CTAB molecules are likely responsible for the nanorod immobilization. UV-vis spectroscopy has been used to follow the kinetics of the nanorod immobilization. The nature of interaction between the gold nanorods and the 16-MHA SAM has been probed by Fourier transform infrared spectroscopy (FTIR). The surface morphology of the immobilized rods is studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM) measurements. SEM was also used to determine the density of the immobilized nanorods as a function of the pH of immobilization. Control over the surface coverage of the immobilized gold nanorods has been demonstrated by simple pH variation. Such well-dispersed immobilized gold nanorods with control over the surface coverage could be interesting substrates for applications such as surface-enhanced Raman spectroscopy (SERS).     

Maleimido-terminated self-assembled monolayers

Four approaches have been explored for the preparation of maleimido-functionalized self-assembled monolayers (SAMs) on silicon. SAMs prepared by self-assembly of maleimido-functionalized alkyltrichlorosilanes (11-maleimido-undecyl-trichlorosilane) on oxide-covered silicon yield higher signals from maleimido functionalities in ATR-IR (attenuated total reflection IR) spectroscopy and XPS (X-ray photoelectron spectroscopy) than the other three methods. The surface composition of maleimido groups was tailored further by the formation of mixed monolayers with nonfunctionalized alkyltrichlorosilanes (decyltrichlorosilane). The order of the alkyl chains within the monolayers only slightly depends on the composition of the mixed monolayers. We utilized the maleimido-terminated SAMs to bind various nucleophilic compounds, alkylamines, alkylthiols, and thiol-tagged DNA oligonucleotides by means of conjugate addition.     

Protein interactions with model chromatographic stationary phases constructed using self-assembled monolayers

Model surfaces representative of chromatographic stationary phases were developed by immobilising an homologous series (C2-C18) of n-alkylthiols, mixed monolayers of C4/C18 and thioalkanes with alcohol, carboxylic acid, amino and sulphonic acid terminal groups onto a flat, silver-coated glass surface using self-assembled monolayer (SAM) chemistry. The processes of adsorption and desorption of serum albumins onto the monolayer surfaces was monitored in real-time using surface plasmon resonance (SPR). Alkyl-terminated SAMs all showed a strong adsorption of bovine serum albumin which was largely independent of alkyl chain length, the ratio of mixed C4/C18 SAMs or the solution pH/ionic strength. The adsorption of human serum albumin to carboxylic and amine terminated SAMs was shown to be predominantly via non-electrostatic interactions (hydrophobic or hydrogen bonding). However, sulphonic acid terminated SAMs showed almost exclusively electrostatic interactions with human serum albumin. This preliminary work using self-assembled monolayer chemistry confirms the usefulness of well characterised SAMs surfaces for investigating protein adsorption and desorption onto/from model chromatography surfaces and gives some guidance for selecting appropriate functionalities to develop better surfaces for chromatography and electrophoresis.     

Thiol-mediated anchoring of ligands to self-assembled monolayers for studies of biospecific interactions

We report a method to immobilize thiol-containing ligands onto self-assembled monolayers (SAMs) of alkanethiolates presenting chloracetylated hexa(ethylene glycol) groups. The chloroacetyl groups react with thiols under mild basic conditions, enabling the stable immobilization of biologically active ligands in a well-defined orientation. These SAMs on gold are well suited for studies of biospecific interactions of immobilized ligands with proteins and cells. As a demonstration, we functionalized these SAMs with thiol-containing derivatives of biotin and benzene sulfonamide and observed the specific binding of neutravidin and carbonic anhydrase, respectively. We also used this method to generate mixed SAMs presenting the Arg-Gly-Asp (RGD) peptide sequence and demonstrated the integrin-mediated adhesion of fibroblast cells to these SAMs. This approach would allow the immobilization of proteins and other sensitive biomolecules and ligands for a wide variety of applications in biotechnology.     

Hydrogen-bonding versus van der Waals interactions in self-assembled monolayers of substituted isophthalic acids

Self-assembled monolayers of a series of isophthalic acids (5-octadecyloxyisophthalic acid, 5-decyloxyisophthalic acid, 5-hexyloxyisophthalic acid, and 5-pentyloxyisophthalic acid) formed on highly ordered pyrolytic graphite (HOPG) at the solid-liquid interface were studied using scanning tunneling microscopy (STM). Although these molecules have the same dicarboxyl headgroup, their hydrocarbon tails are of different lengths. Hydrogen-bonding between headgroups and van der Waals interactions between the hydrocarbon tails control the final morphology of the monolayer. The STM images show that both van der Waals interactions (vdWs) and hydrogen-bonding (H-B) compete to control the structure, but the final structure of the monolayer is determined by balance between the two interactions.     

Odd-even effect and metal induced structural convergence in self-assembled monolayers of bipyridine derivatives

Scanning tunneling microscopy (STM) observations reveal that bipyridine derivatives which exhibit various two-dimensional structures due to the odd-even chain length effect are converged into a lamellar structure upon metal coordination.