A new sulfonamide derivative as magnesium ion receptor: N-tosyl-2,6-diisopropyl-4-(2,3-dimethoxylbenzoylamide)aniline

N-Tosyl-2,6-diisopropyl-4-(2,3-dimethoxylbenzoylamide)aniline (1) has been synthesized and its metal ion (Na⁺, K⁺, Ca²⁺, Mg²⁺) coordinating properties investigated by FT-IR, ESI-MS, and ¹H NMR methods. Among the tested metal ions, the overall stability constant (log K) for Mg²⁺ (6.89) is the highest (Na⁺, 5.64; K⁺, 5.43; Ca²⁺, 5.51) in 10% water/THF at 25.0 ± 0.5 °C determined by UV-vis spectroscopy, indicating that 1 is a potent ionophore for Mg²⁺ ion.     

New ICT probes: synthesis and photophysical studies of N-phenylaza-15-crown-5 aryl/heteroaryl oxadiazoles under acidic condition and in the presence of selected metal ions

Molecular probes 6 and 7, incorporating N-phenylaza-15-crown-5 and aryl/heteroaryl oxadiazole have been designed to function as the new intramolecular charge transfer (ICT) probes. Photophysical properties have been studied under acidic condition as well as in the presence of selected metal ions, Ca²⁺, Ba²⁺, Mg²⁺, Na⁺, K⁺, and Li⁺. The changes in the ICT character of the probes, following the addition of trifluoroacetic acid, were interpreted in terms of site and degree of protonations. Based on the cation affinity, the ICT bands in both UV-vis and emission spectra experienced varying degrees of blue shifts due to removal of the aza-crown ether nitrogen from conjugation. The cation-induced spectral shifts and the stability constants revealed binding strength in the order Ca²⁺>Ba²⁺?Li⁺>Na⁺>K⁺>Mg²⁺. Competitive experiments performed in a matrix of ions also indicated superior interaction of 6 and 7 with Ca²⁺. The excited state decay profiles remained largely unperturbed in the presence of metal ions. The studied probes displayed positive solvatochromism and the Stokes shifts and excited state lifetimes increased with increasing solvent polarity. These findings can be rationalized by invoking highly polar nature of the emittive states. The chemoionophores 6 and 7 constitute potentially interesting Ca²⁺ sensitive probes due to their relatively high binding interaction for Ca²⁺ (log K_s=3.55-3.10) vis-a-vis that of biologically interfering Mg²⁺ (log K_s=1.67-1.30).     

Synthesis and cation binding properties of new arylazo- and heteroarylazotetrathiacalix[4]arenes

New macrocyclic tetrathiacalix[4]arenes have been synthesized by incorporating arylazo-, thiazoleazo- and β-naphthylazo- units in the tetrathiacalix[4]arene molecular architecture through diazotization and coupling reactions. The new compounds have been characterized by ¹H NMR, ¹³C NMR and FAB-MS spectroscopic analysis. X-ray crystallography for one of the new dyes (4a) reveals that the compound is present in the cone conformation. The synthesized macrocycles have been examined for their binding with alkali (Li⁺, Na⁺, K⁺, Cs⁺ and Rb⁺), alkaline earth (Ca²⁺, Mg²⁺ and Ba²⁺) and transition metal cations (Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Hg⁺, Hg²⁺, Pd²⁺ and Pt²⁺) by UV-visible spectroscopy to reveal selective bathochromic shifts for heavier alkali metal ions (cesium and rubidium) and palladium in a 1:1 and 2:1 stoichiometry respectively. The study has a significant bearing on the development of useful ionic filters and sensor materials.     

Synthesis and metal ion complexation of spin labeled 18-crown-6 ethers containing an acridone or an acridine fluorophore unit

Double (spin and fluorescence) labeled pyrroline derivatives of crown ethers containing an acridone or an acridine fluorophore unit (1 and 2) and their diamagnetic analogues (3 and 4) were synthesized. Their fluorescent behavior as well as their complexation properties toward selected metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Zn²⁺) were examined.     

Heavy metal complexation by N-acyl(thio)urea-functionalized cavitands: synthesis, extraction and potentiometric studies

The synthesis and binding properties of resorcinarene-based cavitands functionalized with N-acylthiourea moieties towards different cations are described. Extraction studies with metal (Pb²⁺, Cu²⁺, Ag⁺, Hg²⁺, Cd²⁺, Eu³⁺, Fe³⁺, K⁺, Na⁺, and Ca²⁺) picrates and the incorporation in ion selective electrodes (ISEs), show that there is more than a 40% increase of the Ag⁺ extraction for N-acylthiourea ionophores (2, 3, and 8) in comparison with N-benzoyl-N′-benzylthiourea (9). Ionophore 8, which has a C₃ chain between the platform and the ionophore, extracts two times more Cu²⁺ than the more rigid one (2). Stoichiometry studies showed for ligand 2 a ligand/metal ratio of 1:1, while for model compound 9 a ratio of 1:2 was found. Potentiometric studies of electrodes revealed that cavitands 2, 3, and 8 induce a significantly different selectivity pattern compared to the cation-exchanger used, as well as model compound 9. Especially, a considerable enhancement of the selectivity towards Ag⁺ and Pb²⁺ over K⁺, Ca²⁺, and Na²⁺ ions was observed.     

A selective fluorogenic chemodosimeter for Hg based on the dimerization of desulfurized product

A simple Hg²⁺-selective chemodosimetric system based on thiosemicarbazone was investigated. The transformation of thiosemicarbazone into semicarbazone selectively exerted by Hg²⁺ ions and the dimerization of semicarbazone resulted in a pronounced OFF–ON-type fluorescent signaling behavior. The coexistent metal ions, such as Fe³⁺, Ca²⁺, Cu²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cr³⁺, Mg²⁺, Na⁺, K⁺, and Fe²⁺, had no obvious interference with the detection of Hg²⁺. In addition, S₁₂–Hg²⁺ plays a high sensitivity for basic anions to form an ‘OFF–ON–OFF’ type signaling behavior, with the Hg²⁺-induced emission spectra can be quenched. Moreover, test strips based on S₁₂ exhibited a good selectivity to Hg²⁺. We believe the test strips could act as a convenient and efficient Hg²⁺ test kit.     

Fluorescence sensing of Cu within a pseudo 18-crown-6 cavity

We report herein a pseudo-crown based fluorescent receptor (1) for the selective detection of Cu²⁺ cation. Receptor 1 can detect Cu²⁺ even in 5 μM level in acetonitrile-water (9:1 v/v). Compound 1 is very effective for the detection of Cu²⁺ amongst the series of metal ions studied (Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Pb²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Mn²⁺).     

Synthesis of lariat organochalcogenoethers based on azacalix[3]arenes for the potentiometric detection of [UO2] ions

The syntheses of organochalcogen-supported azacalix[3]arenes are described in a one-pot manner in satisfactory yields. A remarkably selective potentiometric response was accomplished for uranyl ions over a variety of other metal ions, including alkali (Na⁺, K⁺), alkaline-earth (Mg²⁺, Ca²⁺, Ba²⁺), transition and heavy metal ions (Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Fe³⁺, Zn²⁺, Cd²⁺ and Pb²⁺) using an ion-selective electrode based on compound 3 incorporated into a polymeric (PVC) membrane.     

Exploiting the deprotonation mechanism for the design of ratiometric and colorimetric Zn fluorescent chemosensor with a large red-shift in emission

The design, synthesis, and photophysical evaluation of a new naphthalimide-based fluorescent chemosensor, N-butyl-4-[di-(2-picolyl)amino]-5-(2-picolyl)amino-1,8-naphthalimide (1), were described for the detection of Zn²⁺ in aqueous acetonitrile solution at pH 7.0. Probe 1 showed absorption at 451 nm and a strong fluorescence emission at 537 nm (Φ_F=0.33). The capture of Zn²⁺ by the receptor resulted in the deprotonation of the secondary amine conjugated to 1,8-naphthalimide so that the electron-donating ability of the N atom would be greatly enhanced; thus probe 1 showed a 56 nm red-shift in absorption (507 nm) and fluorescence spectra (593 nm, Φ_F=0.14), respectively, from which one could sense Zn²⁺ ratiometrically and colorimetrically. The deprotonated complex, [(1-H)/Zn]⁺, was calculated at m/z 619.1800 and measured at m/z 618.9890. In contrast to these results, the emission of 1 was thoroughly quenched by Cu²⁺, Co²⁺, and Ni²⁺. The addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Mn²⁺, Al³⁺, Cd²⁺, Hg²⁺, Ag⁺, and Pb²⁺ produced a nominal change in the optical properties of 1 due to their low affinity to probe 1. This means that probe 1 has a very high fluorescent imaging selectivity to Zn²⁺ among metal ions.     

Zn selective luminescent ‘off-on’ probes derived from diaryl oxadiazole and aza-15-crown-5

New photo-induced electron transfer (PET) probes OMOX and OBOX, carrying an additional binding site in the form of ‘oxadiazole nitrogen’ have been designed to evaluate binding interactions with biologically significant Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, and Zn²⁺ including environmentally toxic Ba²⁺ and Cd²⁺ using optical spectral techniques. While Li⁺, Na⁺, and K⁺ did not appreciably perturb either the absorption or emission spectra, Ba²⁺, Ca²⁺, Mg²⁺, Zn²⁺, and Cd²⁺ induced slight red shifts (2-8 nm) in the UV-visible spectra as well as pronounced chelation induced enhanced fluorescence (CHEF). Both OMOX and OBOX exhibited the highest CHEF in contact with the zinc ion, whereas Ba²⁺, Ca²⁺, Mg²⁺, and Cd²⁺ induced relatively less emission enhancements. OBOX, which is a poorer emitter (Φ_f=0.0062) than OMOX (Φ_f=0.015), showed highly promising 160-fold emission enhancement in the presence of Zn²⁺. Potential, therefore is available in OBOX to function as a selective luminescent ‘off-on’ sensor for Zn²⁺ in the presence of coordinatively competing Ba²⁺, Ca²⁺, Mg²⁺, and Cd²⁺ ions.     

Novel versatile imine—enamine chemosensor based on 6-nitro-4-oxo-4H-chromene for ion detection in solution, solid and gas-phase: synthesis, emission, computational and MALDI-TOF-MS studies

A new versatile emissive molecular probe (3) derived from 1,5-bis(2-aminophenoxy)-3-oxopenthane bearing two units of 6-nitro-4-oxo-4H-chromene- has been prepared by a Schiff-base condensation method using conventional and green, ultrasound-aided, methods. The dry yellow powder was characterized as the imine species (3). These imine species, however, where found to rapidly convert to their enamine form (4) in solution, under the presence of water traces. This reaction was computationally studied through Density Functional Theory (DFT) in order to investigate the relative stability of the molecular pair 3/4. The sensing properties of the enamine (4) towards various metal ions were investigated via absorption and fluorometric titrations in solution in dichloromethane, acetonitrile and DMSO. The compound shows a fluorescent turn-off response in the presence of Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Ag⁺ over the other metal ions studied, such as Li⁺, Na⁺, K⁺, Ca²⁺, Co²⁺ and Ni²⁺, being stronger for Cu²⁺ and Hg²⁺. The gas phase chemosensing abilities of (3) were also explored suggesting (3) as new active MALDI-TOF-MS matrix by two dry methods showing a strong selectivity towards Cu²⁺ and Ag⁺. Our preliminary results show promising uses of (3) supported in PPMA films as metal ion solid chemosensor.     

Mesitylene based azo-coupled chromogenic tripodal receptors—a visual detection of Ag(I) in aqueous medium

A series of novel tripodal ligands 3a-d, based on a mesitylene anchor, containing aza-thioethers as donor atoms and coupled with 4-(4/3/2-nitrophenyl)azophenol or 4-(2-chlorophenyl)azophenol have been synthesized as chromogenic receptors, which are highly selective for silver(I). The complexation behavior of 3a-d with various metal ions has been evaluated by UV-vis spectrometry in dioxane/water (1:9/v:v) solution at 25 °C. The UV-vis spectra show that the complexation of 3a-c with Ag⁺ have pronounced bathochromic shifts accompanied by a unique color change in the solution from yellow to red, which is visible with the naked eye. The ligands do not show any significant change on addition of other metal ions like Li⁺, Na⁺, K⁺, Sr²⁺, Ca²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Pb²⁺, Ni²⁺, and Cu²⁺ and thus are highly specific and selective for Ag⁺ in the aqueous medium.     

Ferrocenoyl-amino acids: redox response towards di- and trivalent metal ions

The interaction of six ferrocene-amino acid conjugates (Fc-CO-Gly-OH (2a), Fc-CO-Asp-OH (3a), Fc-CO-Glu-OH (4a), 1,1′-Fc(CO-Gly-OH) (2b), 1,1′-Fc(CO-Asp-OH) (3b), and 1,1′-Fc(CO-Glu-OH) (4b)) with Mg²⁺, Ca²⁺, Zn²⁺, La³⁺, and Tb³⁺ was investigated in aqueous solutions using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Addition of metal ions to solutions caused, in some cases, large changes in the half-wave potential, E_1/2. Our electrochemical results show that the Gly systems, 2a and 2b, show a preference for binding Mg²⁺, whereas the Asp and Glu conjugates prefer binding Ln³⁺.     

A hybrid mesoporous material functionalized by 1,8-naphthalimide-base receptor and the application as chemosensor and absorbent for Hg2+ in water

A novel hybrid material (SBA-P1) is prepared through the functionalization of mesoporous silica (SBA-15) with a 1,8-naphthalimide-based dye by sol-gel reaction. The characterization results of elemental analysis (EA), X-ray powder diffractometer (XRD) and spectroscopic methods demonstrate the fluorescence dye P1 is successfully grafted onto the inner surface of SBA-15 and the organized structure is preserved. SBA-P1 can detect Hg²⁺ with high selectivity to Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Co²⁺, Ag⁺, Cr³⁺, and Mg²⁺, Ca²⁺, Li⁺, Na⁺, K⁺ in water and sensitivity to environmentally relevant mercury in complex natural samples. The quenching fluorescence detection is also reversible by treating with EDTA/base. Furthermore, its fluorescence intensity keeps stable in the physiologically relevant pH range. The extraction ability of SBA-P1 is also estimated by inductively coupled plasma source mass spectrometer (ICP), showing that approximately 90% of the Hg²⁺ ion is extracted. These results imply that the hybrid material has potential application for sensing and removing of Hg²⁺ ions in waste water and working as toxicide for acute mercury poisoning.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

Metal ion complexation in acetonitrile by upper-rim allyl-substituted, di-ionized calix[4]arenes bearing two dansyl fluorophores

The influence of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Ag⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺ on the spectroscopic properties of two dansyl (1-dimethylaminonaphthalene-5-sulfonyl) groups linked to the lower rims of a series of three, structurally related, di-ionized calix[4]arenes is investigated by means of absorption and emission spectrophotometry. Di(tetramethylammonium) salts of the di-ionized ligands, L, L1, and L2, which differ in having no, two and four allyl groups, respectively, on the upper rim of the calix[4]arene scaffold, are utilized for the spectrofluorimetric titration experiments in MeCN. On complexation by alkaline earth metal cations, the emission spectra undergo marked red shifts and quenching of the dansyl fluorescence. These effects are weaker with alkali metal cations. Transition metal cations and Pb²⁺ interact strongly with the ligands. In particular, Fe³⁺, Hg²⁺ and Pb²⁺ cause greater than 99% quenching of the dansyl fluorescence.     

Synthesis, characterization, and evaluation of rhodamine based sensors for nerve gas mimics

Six new rhodamine-B based compounds were synthesized (1-6) and used as fluorescent turn-ON sensors for diethyl chlorophosphate (DCP) in aqueous media at pH 7.0. Compound 1 and 3 gave high fluorescent enhancement with DCP compared to the other compounds. Very high selectivity and sensitivity were observed as these compounds did not show significant fluorescent enhancement with dimethyl methylphosphonate (DMMP), HCl, and metal ions, such as Na⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺. Depending on the way the sensor is presented, results are instantaneous or observed over some minutes.     

A highly selective turn-on fluorescent chemosensor for copper(II) ion

A new pyrene derivative (1) containing a diaminomaleonitrile moiety exhibits high selectivity for Cu²⁺ detection. Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence values for the system. The apparent association constant (K_a) of Cu²⁺ binding in chemosensor 1 was found to be 5.55×10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5-7.5.     

A squaraine-based chemosensor for Hg and Pb

A novel unsymmetrical cationic squaraine dye (USqH⁺), absorbing in the near-infrared region (600-850 nm), was synthesized by reacting a semi-squaric acid derivative 3-[4-(N,N-dioctylamino)phenyl]-4-hydroxycyclobutene-1,2-dione with the squarylium dye, bis(3-methylbenzothiazol-2-ylidene)squaraine. Addition of micromolar amounts of Hg²⁺ and Pb²⁺ to solutions of USqH⁺ in dichloromethane brings about significant changes in its absorption spectrum, resulting in a change in colour of the solution from green to pink. The absorption spectrum of the dye is relatively insensitive to other environmentally relevant metal ions, making it possible to visually detect Hg²⁺ and Pb²⁺ in the presence of other metal ions. Molecular modeling of the complexes at the density functional theory (DFT) and semiempirical PM3 levels strongly suggests that the oxygen atoms are the most likely choice for cation binding. The calculations also indicate a high affinity of Hg²⁺ and Pb²⁺ toward the formation of 2:1 complexes, which is in good agreement with the experimental results.     

Synthesis, IR and NMR characterization and ion extraction properties of tetranonylcalix[4]resorcinol bearing acetylhydrazone groups

A series of new calix[4]resorcinarenes (rccc-isomer) and resorcinols functionalized by acetylhydrazone binding fragments have been synthesized. The IR and NMR data and stereochemical behaviour of hydrazones are reported and compared with the results of earlier investigations. The barriers of rotation of hydrazone fragments for some octahydrazone derivatives of calix[4]resorcinarenes and their resorcinol analogues have been determined by NMR-measurements. The complexing behaviour of bis- and octahydrazones has been studied by liquid-liquid extraction towards the s-metal ions (Li⁺, Na⁺, K⁺, Cs⁺ and Ca²⁺), p-metal ions (Pb²⁺), d-metal ions (Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Hg²⁺) and f-metal ions (La³⁺, Gd³⁺ and Lu³⁺). The stoichiometry of complexes and the extraction constants have been determined. It has been established that octahydrazones do not extract alkali metal cations but show excellent selectivity towards transition and soft heavy metal cations (especially Hg²⁺ or Pb²⁺).