Distribution of local anesthetics in lipid membranes

Absorption of local anesthetics into lipid membranes and adsorption onto their surfaces were studied as a function of the pH of aqueous bulk solutions by measuring lipid vesicle electrophoretic mobility, the partition of the anesthetics between the aqueous and membrane phases by the use of fluorescence and radioactive tracer methods, and the effect of the anesthetics on interfacial tension of lipid monolayers formed at the oil/aqueous interface.

At a pH much lower than the pK_a value of the local anesthetic, the charged form of the local anesthetic was only adsorbed onto the membrane surface, as determined from vesicle electrophoretic mobility, radioisotope tracer and the monolayer surface tension studies. Surface partition coefficients of the charged form of the local anesthetics on phosphatidylcholine and phosphatidylserine membranes were obtained from the data of electrophoretic mobilities for lipid vesicles. The surface partition coefficients of various local anesthetics paralleled those of the bulk partition coefficients.

As the pH of the solutions increased, the adsorbed amount of the charged form of the anesthetic at the membrane interface decreased, while the absorption of the uncharged form of the local anesthetic into the membrane increased. The total amount of local anesthetic adsorbed per unit area of the membrane generally increased as the pH of the solution increased. This was also observed from the measurements of the fluorescence of local anesthetics adsorbed into the membranes. At lower pH than that corresponding to the pK_a value of the local anesthetic, the amount of anesthetic adsorbed depended greatly upon the membrane surface charge. At a higher pH than its pK_a, it did not depend appreciably on the surface charge density of the membrane but did depend on the bulk partition coefficients between the aqueous and oil phases.     

Membrane activity of ionisable drugs – a task for liquid–liquid electrochemistry?

Structurally related aminoacridine therapeutics (aminacrine, tacrine, velnacrine and proflavine) were studied electrochemically at the interface between two immiscible electrolyte solutions. To assess both their neutral and ionic partition coefficients, cyclic voltammetry was used to obtain the transfer potential as a function of the aqueous phase pH. Subsequently, in order to create a simple model of a biological membrane, a lipid monolayer was deposited at the liquid–liquid interface using the Langmuir–Blodgett technique. Electrochemical impedance spectroscopy was employed to study the interactions between the drug ions and the biomimetic phospholipid monolayer. Using a model incorporating a charge transfer mechanism coupled with potential dependent adsorption steps, the membrane activity of the studied drug ions could be estimated. The results indicate liquid–liquid electrochemistry to be a versatile tool for detecting differences in membrane activity even between structurally very similar drugs.     

Amperometric Determination of Creatinine with a Dialysis Membrane‐Covered Nitrobenzene/Water Interface for Urine Analysis

The ion transfer of creatinine (CRE) at a polarized nitrobenzene (NB)/water (W) interface has been studied. When the pH of the W phase is in the range of 1.2 to 4.0, a well‐defined voltammetric wave is observed for a simple transfer of CRE⁺ (protonated form) at the NB/W interface. This transfer reaction has been applied to develop an amperometric method for the determination of CRE in urine. In this system, the NB/W interface is covered with a dialysis membrane to prevent possible interference from urine proteins. The concentration of CRE in a urine control has successfully been determined.     

Ion transfer of bromophenol blue across liquid-liquid interfaces

The ion transfer of the acidic dye bromophenol blue (BPB) at the interfaces of water/nitrobenzene (W/NB), water/1,2-dichloroethane (W/1,2-DCE) and water/(nitrobenzene+chlorobenzene) (W/(NB +CB)) was studied in detail by cyclic voltammetry (CV), chronopotentiometry with linear current scanning (CLC), controlled potential electrolysis and UV spectroscopic methods. Using controlled potential electrolysis, we observed successfully the transfer process of BPB across the W/NB interface from the colour changes of BPB in two different phases. The proposed transfer mechanism for BPB is proved to be reasonable using UV spectroscopy of the product of the electrolysis. The standard potential differences Δ^o_w^o and the standard Gibbs energies of the BPB transfer from water to some organic solvents were calculated. The dissociation constants of BPB obtained were quite close to the literature values.     

Facilitated Proton Transfer by a Novel 2-Aminothiazole Derivative Across the Water/1,2-Dichloroethane Interface

The behavior of proton transfer facilitated by a novel thiazole derivative, N-methyl-4-(4-phenoxyphenyl)thiazol-2-amine (MPPT), across the water/1,2-dichloroethane (1,2-DCE) interface was investigated electrochemically. The ionic partition diagram for MPPT was obtained from interpretation of the cyclic voltammograms. The apparent partition coefficient of MPPT was evaluated by the shaking-flask method under experimental conditions, while that for the protonated form of MPPT was calculated from its transfer potential obtained from the ionic partition diagram. It was suggested that the mechanism for transfer of MPPT across the water/1,2-DCE) interface depends on the pH of the aqueous phase. The parameters of the facilitated proton transfer across the water/1,2-DCE interface were evaluated as a quantitative measure of its lipophilicity.     

Physicochemical Characterization of Sildenafil: Ionization,Lipophilicity Behavior,and Ionic‐Partition Diagram Studied by Two‐Phase Titration and Electrochemistry

Sildenafil (Viagra^TM) was examined for its ionization and lipophilicity by two‐phase titration and electrochemistry at the interface between two immiscible electrolyte solutions (ITIES) in the 1,2‐dichloroethane/H₂O system. The dissociation constants (basic pK_a=6.78, acidic pK_a=9.12) and partition coefficients of the various species, together with the effects of electrical potential, were used to construct an ionic partition diagram (pH‐potential representation). This allowed to interpret the transfer mechanisms of sildenafil at liquid/liquid interfaces, suggesting in particular that an intramolecular H‐bond influences the lipophilicity of the neutral and cationic species. Conformational calculations confirmed this hypothesis.     

Potential-dependent adsorption and transfer of poly(diallyldialkylammonium) ions at the nitrobenzene|water interface

Electrochemically driven adsorption and partition of a series of poly(diallyldialkylammonium) ions (PDADAA(+): alkyl = methyl, ethyl, propyl, and butyl) at the nitrobenzene (NB)|water (W) interface have been studied using voltammetry and electrocapillary measurements. When the phase-boundary potential, Δφ, that is, the inner potential of the W phase referred to that of the NB phase, is negative, poly(diallyldimethylammonium) (PDADMA(+)) shows little surface activity. The scanning of Δφ in the positive direction induces, first, the adsorption of PDADMA(+) at the interface and, then, the desorption of adsorbed PDADMA(+) ions into the NB phase, followed by the diffusion-limited transfer of PDADMA(+) from W to NB. The elongation of the dialkyl chains gives the stronger surface activity of PDADAA(+) even when Δφ < 0. The PDADAA(+) polyions studied are only slightly more hydrophilic than the corresponding monomers. However, the polycationic character of PDADAA(+) renders the adsorption, desorption, and ion transfer strongly dependent on Δφ and gives rise to unusual, M-shaped electrocapillary curves. The interplay of adsorption-desorption and ion transfer of PDADAA(+) ions induces the electrochemical instability of the interface and the emulsion formation on the NB side of the interface.     

质子化非那吡啶在功能化复合介孔膜修饰的液/液界面上的转移反应

采用循环伏安法和差分脉冲伏安法考察了临床药物盐酸非那吡啶在功能化复合介孔膜修饰的水/1,6-二氯己烷(W/DCH)界面上的转移行为. 研究结果表明, 盐酸非那吡啶中的非那吡啶(PAP) 可在酸性条件下发生质子化形成非那吡啶阳离子(HPAP⁺)并在该界面上发生转移. 根据循环伏安曲线峰电流与扫描速率的关系以及Randles-Sev$\check{c}$ik 方程, 计算得到HPAP⁺在复合介孔膜内水相中的扩散系数为5.14×10^-8 cm²/s. 研究发现, 相对于空白膜修饰的W/DCH界面, 该复合介孔膜修饰的W/DCH界面可增强非那吡啶阳离子转移时的电流响应, 并提升非那吡啶阳离子的检测性能. 另外, 利用液/液界面电化学方法绘制了非那吡啶在功能化复合介孔膜修饰的W/DCH界面上的离子分布图, 从而得到非那吡啶在该界面上不同条件下的分布情况及其分配系数和吉布斯转移自由能.     

Voltammetric study of the transfer of fluoride ion at the nitrobenzene / water interface assisted by tetraphenylantimony.

The transfer of F- ion assisted by an organometallic complex cation tetraphenylantimony (TPhSb+) across the polarized nitrobenzene / water (NB / W) interface has been studied by means of ion-transfer voltammetry. A well-defined voltammetric wave was observed within the potential window at the NB / W interface when tetraphenylantimony tetrakis(4-chlorophenyl) borate and F- ion were present in NB and W, respectively. The voltammogram can be interpreted as being due to the reversible transfer of F- ion assisted by the formation of the TPhSbF complex through the coordination of F- to Sb atom in NB. The formal formation constant of TPhSbF in NB has been determined to be 10(1.95 +/- 0.2 M(-1). No voltammetric wave due to the TPhSb(+)-assisted transfer of other anions such as Cl-, Br, I-, NO3-, CH3COO- and H2PO4(-) ions has been observed within the potential window.     

Generalization of ionic partition diagrams to lipophilic compounds and to biphasic systems with variable phase volume ratios.

The ionic partition diagram methodology has been generalized to address both hydrophilic and lipophilic compounds and to consider biphasic systems with variable phase volume ratios. With this generalized approach electrochemical measurements of ion transfer potentials afford the determination of the standard partition coefficients of all forms of ionizable molecules, including the neutral form, as well as the evaluation of the dissociation constant of monoprotic substances. An interesting consequence of this approach is the definition of an extraction pK(a,ext) which is the apparent pK(a) of neutral acids and bases when dissolved in the organic phase.     

SECM study of solute partitioning and electron transfer at the ionic liquid/water interface

Molecular partitioning and electron-transfer kinetics have been studied at the ionic liquid/water (IL/water) interface by scanning electrochemical microscopy (SECM). The ionic liquid C8mimC1C1N is immiscible with water and forms a nonpolarizable interface when in contact with it. Partitioning of ferrocene (Fc) across the IL/water interface was studied by SECM and found to be kinetically fast with a partition coefficient CIL/CW of 2400:1. The partition coefficient value was measured by SECM under quasi-steady-state conditions without waiting for complete solute equilibration. To investigate the kinetics of the electron transfer (ET) between aqueous ferricyanide and Fc dissolved in IL, a new approach to the analysis of the SECM current-distance curves was developed to separate the contributions of Fc partitioning and the ET reaction to the tip current. Several combinations of different aqueous and nonaqueous redox species were investigated; however, only the Fc/Fe(CN)63- system behaved according to the Butler-Volmer formalism over the entire accessible potential range.     

A comparative study of the anion transfer kinetics across a water/nitrobenzene interface by means of electrochemical impedance spectroscopy and square-wave voltammetry at thin organic film-modified electrodes

The kinetics of the transfer of a series of hydrophilic monovalent anions across the water/nitrobenzene (W/NB) interface has been studied by means of thin organic film-modified electrodes in combination with electrochemical impedance spectroscopy and square-wave voltammetry. The studied ions are Cl-, Br-, I-, ClO4-, NO3-, SCN-, and CH3COO-. The electrode assembly comprises a graphite electrode (GE) covered with a thin NB film containing a neutral strongly hydrophobic redox probe (decamethylferrocene or lutetium bis(tetra-tert-butylphthalocyaninato)) and an organic supporting electrolyte. The modified electrode is immersed in an aqueous solution containing a supporting electrolyte and transferring ions, and used in a conventional three-electrode configuration. Upon oxidation of the redox probe, the overall electrochemical process proceeds as an electron-ion charge-transfer reaction coupling the electron transfer at the GE/NB interface and compensates ion transfer across the W/NB interface. The rate of the ion transfer across the W/NB interface is the limiting step in the kinetics of the overall coupled electron-ion transfer reaction. Moreover, the transferring ion that is initially present in the aqueous phase only at a concentration lower than the redox probe, controls the mass transfer regime in the overall reaction. A rate equation describing the kinetics of the ion transfer that is valid for the conditions at thin organic film-modified electrodes is derived. Kinetic data measured with two electrochemical techniques are in very good agreement.     

Probing non-polarizable liquid/liquid interfaces using scanning ion conductance microscopy

The study of microscopic structure of a liquid/liquid interface is of fundamental importance due to its close relation to the thermodynamics and kinetics of interfacial charge transfer reactions.In this article,the microscopic structure of a non-polarizable water/nitrobenzene(W/NB) interface was evaluated by scanning ion conductance microscope(SICM).Using SICM with a nanometer-sized quartz pipette filled with an electrolyte solution as the probe,the thickness of this type of W/NB interface could be measured at sub-nanometer scale,based on the continuous change of ionic current from one phase to another one.The effects for thicknesses of the non-polarizable W/NB interfaces with different electrolyte concentrations,the Galvani potentials at the interface and the applied potentials on the probe were measured and systematically analyzed.Both experimental setups,that is an organic phase up and an aqueous down,and a reverse version,were employed to acquire the approach curves.These data were compared with those of an ideal polarizable interface under the similar experimental conditions,and several characteristics of non-polarizable interfaces were found.The thickness of a non-polarizable interface increases with the decrease of electrolyte concentration and the increase of applied potential,which is similar to the situation of a polarizable liquid/liquid interface.We also find that the Galvani potential across a non-polarizable interface can also influence the interfacial thickness,this phenomenon is difficult to observe when using polarizable interface.Most importantly,by the comparison of two kinds of liquid/liquid interfaces,we experimentally proved that much more excess ions are gathered in the space charge layer of non-polarizable interfaces than in that of polarizable interfaces.These results are consistent with the predictions of molecular dynamic simulations and X-ray reflectivity measurements.     

Reverse micellar aggregates: effect on ketone reduction. 1. Substrate role

The reduction of three aromatic ketones, acetophenone (AF), 4-methoxyacetophenone (MAF), and 3-chloroacetophenone (CAF), by NaBH(4) was followed by UV-vis spectroscopy in reverse micellar systems of water/AOT/isooctane at 25.0 degrees C (AOT is sodium 1,4-bis-2-ethylhexylsulfosuccinate). The first-order rate constants, k(obs), increase with the concentration of surfactant due to the substrate incorporation at the reverse micelle interface, where the reaction occurs. For all the ketones the reactivity is lower at the micellar interface than in water, probably reflecting the low affinity of the anionic interface for BH(4)(-). Kinetic profiles upon water addition show maxima in k(obs) at W(0) approximately 5 probably reflecting a strong interaction between water and the ionic headgroup of AOT; at W(0) < 5 by increasing W(0) BH(4)(-) is repelled from the anionic interface once the water pool forms. The order of reactivity was CAF > AF > MAF. Application of a kinetic model based on the pseudophase formalism, which considers distribution of the ketones between the continuous medium and the interface, and assumes that reaction take place only at the interface, gives values of the rate constants at the interface of the reverse micellar system. At W(0) = 5, we conclude that NaBH(4) is wholly at the interface, and at W(0) = 10 and 15, where there are free water molecules, the partitioning between the interface and the water pool has to be considered. The results were used to estimate the ketone and borohydride distribution constants between the different pseudophases as well as the second-order reaction rate constant at the micellar interface.     

Description of the Effects of Non‐ion‐exchange Extraction and Intra‐membrane Interactions on the Ion‐selective Electrodes Response within the Interface Equilibria‐triggered Model

The recently proposed interface equilibria‐triggered dynamic diffusion model of the boundary potential has proven its high predictive efficiency for quantification of the ion exchange and co‐extraction effects at the interface, as well as of the trans‐membrane transfer effect, on the electrode response. It is applicable for both ion exchanger‐based and neutral carrier‐based electrodes. In this communication, the adaptability of this model to more complex cases, when non‐ion‐exchange extraction processes at the interface (partition of organic acids’ and bases’ molecular forms and extraction of ionic associates) are coupled with protolytic equilibria in the aqueous phase and with self‐solvation process in the membrane phase, is demonstrated. By the example of electrodes reversible to ions of highly lipophilic physiologically active bases and acids (amiodarone, verapamil, vinpocetine, salicylic acid), it is shown that the peculiarities of their functioning, such as a very strong pH effect on the potential of cation‐selective electrodes, non‐monotonic pH dependence of the potential and super‐Nernstian response slope in certain pH region for a salicylate‐selective electrode, are well described within the model.     

Ionic Partition Diagram of the Zwitterionic Antihistamine Cetirizine

A recent analysis of the lipophilicity profile of cetirizine in the octanol/water and dodecane/water systems revealed a partial intramolecular charge neutralization that can partly explain why cetirizine has pharmacokinetic properties differing from those of first‐generation antihistamines such as hydroxyzine. As conformational changes are the principal driving force for this intramolecular effect, the present study deals with the partitioning of cetirizine and hydroxyzine in an apolar medium well‐suited to reveal intramolecular interactions, namely the 1,2‐dichloroethane/water system. The lipophilicity of the different electrical forms of cetirizine and hydroxyzine was studied by two‐phase titrimetry and cyclic voltammetry. The differences in lipophilicity between the dicationic, monocationic, zwitterionic, and anionic species of cetirizine indicated intramolecular interactions via folded conformations, which render the molecule markedly more lipophilic than expected at physiological pH. Folded conformations were also found to predominate in monocationic and neutral hydroxyzine. The ionic partition diagram of cetirizine indicates that it acts as a proton transporter across interfaces under certain conditions of pH and Galvani potential difference. This study underlines the importance of conformational effects on the partition properties of cetirizine and hydroxyzine, as well as the complexity of its interfacial mechanisms of transfer. In particular, cetirizine can facilitate proton transfer, a property of potential biological relevance.     

Effect of n-octanol in the mobile phase on lipophilicity determination by reversed-phase high-performance liquid chromatography on a modified silica column

In this study, we show that the addition of n-octanol to the mobile phase improves the chromatographic determination of lipophilicity parameters of xenobiotics (neutral solutes, acidic, neutral and basic drugs) on a Phenomenex Gemini C18 column. The Gemini C18 column is a new generation hybrid silica-based column with an extended pH range capability. The wide pH range (2-12) afforded the examination of basic drugs and acidic drugs in their neutral form. Extrapolated retention factor values, [Formula: see text] , obtained on the above column with the n-octanol-modified mobile phase were very well correlated (1:1 correlation) with literature values of logP (logarithm of the partition coefficient in n-octanol/water) of neutral compounds and neutral drugs (69). In addition, we found good linear correlations between measured [Formula: see text] values and calculated values of the logarithm of the distribution coefficient at pH 7.0 (logD(7.0)) for ionized acidic and basic drugs (r(2)=0.95). The Gemini C18 phase was characterized using the linear solvation energy relationship (LSER) model of Abraham. The LSER system constants for the column were compared to the LSER constants of n-octanol/water extraction system using the Tanaka radar plots. The comparison shows that the two methods are nearly equivalent.     

Octanol/water partition of ionic species, including 544 cations

[structure: see text] Partition coefficients of single ions in the octanol/water system (log P(oct)) have been assigned on the (Ph4As+, Ph4P+) = Ph4B- assumption. The log P(oct) values of Cl-, Br-, and I- ions are then used to obtain the partition coefficients of cations from partition coefficients of the neutral combination of anion and cation. Partition coefficients of 544 cations derived from 585 organic salts from the MedChem database have been studied. The contributions of the aliphatic charge N+ and aromatic charge n+ in these cations have been investigated. The results show that the contributions of N+ and n+ in different homologous series are affected by the attached functional groups and are not constant, although the effect of the central cation is constant along any given homologous series. The latter can be accounted for qualitatively and semiquantitatively by the electrostatic theory of ionic solvation of Abraham and Liszi. A number of regression equations have been established between partition coefficients of ions and partition coefficients of the corresponding neutral species. These equations can be used to estimate octanol/water partition coefficients for additional cations to about 0.5 log unit.