Functional modification,self-assembly and application of calix[4]resorcinarenes

As a special subset of calix[4]arene, calix[4]resorcinarene is an excellent molecular platform which could be modified by introducing functional groups to multiple sites at the upper and lower rims. There are mainly three ways to build functionalized calix[4]resorcinarene derivatives: (1) modification on the C-2 sites of calix[4]resorcinarenes; (2) modification on the phenolic hydroxyl groups of calix[4]resorcinarenes; (3) modification on the bridging methylenes at lower rim of calix[4]resorcinarenes. Functionalized calix[4]resorcinarene derivatives play an important role in the development of self-assembly chemistry, among which hydrogen bonding and metal coordination are the two most common interactions to obtain multicomponent structures. Moreover, due to the excellent topological structures and various active substituents of functionalized calix[4]resorcinarene derivatives, their applications in various fields, such as nanoparticles, catalysts, fluorescent materials, and sensors, have been briefly presented in this paper.

     

Energies of charge transfer and supramolecular interactions of some mono O-substituted calix[6]arenes with [60]fullerene by absorption spectrometric method

Equilibria for the formation of supramolecular complexes of [60]fullerene with a series of mono O-substituted calix[6]arenes, namely: (i) 37-methoxy-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (1), (ii) 37-allyl-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (2), (iii) 37-phenacyl-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (3), (iv) 37-ethylester-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (4) and (v) 37-benzyl-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (5) have been studied in CCl4 medium by absorption spectroscopic technique. The stoichiometry has been found to be 1:1 ([60]fullerene:calix[6]arene) in each case. An absorption band due to charge transfer (CT) transition is observed in each case in the visible region. The vertical ionisation potentials (I(D)(v)) of all the calix[6]arenes under study have been estimated utilising CT transition energy. The experimental I(D)(v) values also yield a good estimate of the electron affinity of [60]fullerene. The degrees of CT in the ground state of the complexes have been found to be very low (about 0.15%). Resonance energy of the complexes have been estimated. Thermodynamic parameters for the supramolecular complex formation of [60]fullerene with mono O-substituted calix[6]arene receptors are reported. It is observed that among the calix[6]arenes under the present study, only 1 and 4 form inclusion complexes with [60]fullerene. This has also been substantiated by theoretical calculation using PM3 method. Thus presence of one substituent group (of different types) on the lower rim of the calix[6]arene molecule has been shown to govern the host-guest complexation process.     

Synthesis and structures of an unusual germanium(II) calix[4]arene complex and the first germanium(II) calix[8]arene complex and their reactivity with diiron nonacarbonyl

The protonolysis reaction of the germanium(II) amide Ge[N(SiMe3)2]2 with calix[4]arene and calix[8]arene furnishes the two germanium(II) calixarene complexes {calix[4]}Ge2 and {calix[8]}Ge4, respectively, which have been crystallographically characterized. The calix[4]arene complex contains a Ge2O2 rhombus at the center of the molecule and is one of the only four germanium(II) calix[4]arenes that have been structurally characterized. The calix[8]arene species is the first reported germanium calix[8]arene complex, and it exhibits an overall bowl-shaped structure which contains two Ge2O2 fragments. The latter complex reacts with Fe2(CO)9 to yield an octairon compound, which has also been structurally characterized and contains four GeFe2 triangles arranged around the macrocyclic ring. The germanium(II) centers are oxidized to germanium(IV) in this process, with concomitant reduction of the neutral diiron species to Fe2(CO)(8)2- anions.     

Analytical applications of nano-baskets of calix[4]pyrroles

Calix[4]pyrrole is one such class which holds a great promise in the fields of sensors and their unique behavior as sensors owes to its structural flexibility. Anion binding ability of calix[4]pyrrole has been modified in a variety of ways. Introduction of electron releasing and electron withdrawing groups at the meso position or at β-pyrrolic positions leads to calix[4]pyrrole with deep cavities and fixed walls which shows increased selectivity and modified binding effects. Strapping of calix[4]pyrrole is another way to modify its structural behavior which is responsible for its binding behavior. Choice of strap could play a profound role not only in increasing the intrinsic anion binding affinity of calix[4] pyrrole, but also in modulating the receptor anion stoichiometry, thereby modifying potentially the inherent anion binding selectivity. Calix[n]pyrroles with extended cavities have also been synthesized. Such as calix[3]bipyrrole binds bromide substantially with high affinity than calix[4]pyrrole. Calix[4]pyrrole has also been used to produce anion sensors that can report the presence of anion by means of a color change. The medium effect on the complexation of calix[4]pyrrole and anion has been investigated in various solvents. Calix[4]pyrrole has also been used to increase the ionic conductivity of solid polymer electrolyte by anion complexation of the metal salt. Calix[4]pyrrole has been used to obtain optical sensors using surface plasmon resonance technique. Composite films of cellulose acetate containing calix[4]pyrrole has also been reported which has potential usage in packaging, storage and preservation. In nut shell, calix[4]pyrrole can be modified in a variety of ways to form versatile sensors which can be used in variety of ways in various areas.     

新型偶氮杯[4]芳烃的合成与构象研究

使用相应的w-硫醚羧酸酰氯与杯[4]芳烃或者偶氮杯[4]芳烃酰化合成了一类新型的杯[4]芳烃衍生物。分离得到六个新化合物4a-4c和5a-5c，并使用MALDI, EA, ¹H和¹³C NMR进行了表征。NMR图谱表明偶氮杯[4]芳烃衍生物 5a-5c均为1,3-转换构型，而4a-4c则均为锥式构型。对偶氮杯[4]芳烃衍生物5a-5c的红外和紫外性质也进行了研究。     

Synthesis of amine, halide, and pyridinium terminated 2-alkyl-p-tert-butylcalix[4]arenes

The synthesis of calix[4]arenes with functional groups tethered to a single methylene bridge has been explored. Mono-lithiated calix[4]arenes react with 1,ω-bromochloroalkanes to give 2-(ω-chloroalkyl)-calix[4]arenes, which function as key intermediates in the synthesis of a variety of tether-functionalized calix[4]arenes. Subsequent reactivity of these chloroalkyl species has allowed for successful synthesis of 2-(ω-iodoalkyl)-calix[4]arenes, 2-(ω-pyridiniumalkyl)-calix[4]arenes, and 2-(ω-aminoalkyl)-calix[4]arenes. This latter group of amine-terminated calix[4]arenes are especially significant as they may serve as useful entries to a wide range of subsequent chemistry, including metal coordination or attachment to a solid support. Both alkyl and aryl amines have been incorporated at the end of the tether, and a 2,6-diisopropylaniline derivative has been analyzed by X-ray diffraction.     

Synthesis of New Calix[4]arenes Functionalizated by Acetylhydrazide Groups

A series of new calix[4]phenols, calix[4]resorcinols and calix[4]pyrogallols with acetylhydrazide substitutes has been␣synthesized with high yields by hydrazinolysis of ester group containing calix[4]arenes. The synthesized calix[4]phenols adopt the cone conformation while the calix[4]resorcinol and calix[4]pyrogallol derivatives prefer the boat conformation. The amide fragment of the hydrazide groups predominantly exists in the trans-conformation. The binding ability of synthesized calix[4]arenes toward transition and alkali metals by solvent extraction has been investigated.     

Halo-derivatised calix[4]tubes

Halo functionalisation of calix[4]tubes has been investigated through both derivatisation of individual calix[4]arenes and calix[4]tubes, using classical synthetic methods, to allow preparation of a series of novel derivatives. The solution and solid state properties are in accordance with the constituent[4]arenes adopting flattened cone arrangements which on complexation with potassium simplify to a regular cone. Electrospray and 1H NMR studies, combined with molecular modelling have been used to ascertain the metal binding of this new series of cryptand like ionophores, demonstrating their retained selectivity for binding potassium over other Group 1 metals and the dependence on counter anion in the weak binding of silver.     

Synthesis of Macrocyclic Lactones Building on Double Calix[4]arenes

Naturalmacrocycliclactonesandlactamsastheionophoreshaveabsorbedextensiveinterestsbecauseoftheirveryhighselectiverecognitionforalkalimetals.rorexample,nactinslandvalinomycin'havethehighestselectivityforpotassiumamongalltheionopohores.Artificialmacrocycliclactonesalsoshowedselectivityforcanons,althoughthebindingstrengthwaslowerthanthatofcommoncrownethers3.Calixareneswereaveryimportantkindofartificialreceptors,whosederivativeshaveshowedthehighestselectivityforNa ,K andCs amongthesynthesizedmacro…     

Synthesis of cone, partial-cone, and 1,3-alternate 25, 27-Bis

The preparation of 25,27-bis[1-(2-ethyl)hexyl]- and 25, 27-bis[1-(2-tert-butoxy)ethyl]calix[4]arene-crown-6 combining one polyether crown-6 and one alkylchain O-attached on each side of a calix[4]arene in the cone, partial-cone, and 1,3-alternate conformations are reported. The control over 25, 27-bisalkylcalix[4]arene-crown-6 conformation via varying specific reaction conditions was studied. The series of calix[4]arenes have been prepared by two routes, which differ in the order in which the alkyl or polyether groups were introduced. Moreover, methods have been developed to selectively prepare the cone and partial-cone conformers by using an appropriate base in the alkylation reactions. The conformations of these new derivatives have been probed by (1)H NMR analysis and X-ray crystallography. The (1)H and (13)C NMR spectra of 25,27-bis[1-(2-ethyl)hexyl]calix[4]arene-crown-6, 1, 3-alternate 1, cone 2, and partial-cone 3 are also discussed.     

Calix[4]crown-5-ether as a biolinker for immobilization of protein and DNA in fluorescence glass slide chip

Binding affinity between calix[4]crown-5-ether and amino acids have been compared by studying the complexation association constant, and the best value has been obtained from complex of calix[4]crown-5 ether, and HrSOD tagged with Arg and Lys were tested to investigate the effects of specific residues in protein immobilization on calix[4]crown-5-ether. The protein tagged with 9Args has been shown to have much better immobilization potential. Taking advantage of the similar structure of a moiety of guanine base to that of Arg side chain, different homo-oligonucleotides have been immobilized, and it was found that calix[4]crown-5-ether is an appropriate agent in the immobilization of dGTP homo-oligonucleotides. The results demonstrate that calix[4]crown-5-ether on glass slide chip could be applied as an excellently oriented immobilization agent for protein or for DNA microarray designing. It has the ability of single base differentiation in SNP sequence detection.     

Synthesis of huge macrocycles using two calix[4]arenes as templates

Macrocycles with up to 100 atoms have been synthesised using two calix[4]arenes as templates: first, (3,5-dialkenyloxy)phenyl groups are attached to the wide rim of a calix[4]arene via urea links, then the alkenyl groups are connected via a metathesis reaction using a tetratosylurea calix[4]arene for their correct prearrangement and finally the urea functions are cleaved to detach the newly formed macrocycles.     

Synthesis and electronic properties of covalent assemblies of oligophenylenevinylene units arising from a calix

Assemblies of four oligophenylenevinylene moieties arising from a calix[4]arene core, i.e., calix[4]oligophenylenevinylenes, have been prepared by Heck-type cross-coupling reactions of styrene derivatives with a tetraiodinated cone-calix[4]arene precursor. Photophysical studies in solution have revealed that there are electronic ground state interactions between the covalently bonded OPV moieties. The absorption spectra of the calix[4]oligophenylenevinylenes are significantly different from those obtained by summing the spectra of four model units and their emission is red-shifted when compared to the corresponding model compounds. Electrochemical studies have shown that the redox processes of the four OPV subunits do not take place at the same potentials indicating also a strong electronic interaction among them in the calix[4]oligophenylenevinylenes.     

A facial microwave-assisted synthesis, spectroscopic characterization and preliminary complexation studies of calix[4]pyrroles containing the hydroxamic-acid moiety

The synthesis, spectroscopic characterization and preliminary complexation properties of functionalized calix[4]pyrroles are described. To date, two generalized preparative approaches have been pursued (i) modifying the basic pyrrole-plus-ketone synthesis of calix[4]pyrrole by using microwave irradiation protocol, (ii) the basic meso-tetra(methyl) meso-tetra(p-nitrophenyl) calix[4]pyrrole skeleton was functionalized to give hydroxamic acids, especially in the meso-position of the macrocycles. The structures of novel calix[4]pyrrole hydroxamic acid derivatives were confirmed on the basis of various physico-chemical techniques such as elemental analysis, FT-IR, ¹H NMR and FAB-Mass. The results of preliminary studies on the extraction of vanadium (V) with the host calix[4]pyrrole hydroxamic acids were elucidated by significant examination of UV–Vis spectroscopy and ICP-AES. Single crystal structure of basic meso-tetra(methyl) meso-tetra (p-nitro phenyl) calix[4]pyrrole moiety has also been reported.     

Bridge-disubstituted calix[4]arenes obtained via a new preparative route. Synthesis and structural study

A series of calix[4]arenes bearing various substituents including alkyl, p-bromobenzyl, carboxy and allyl at opposite methylene bridges has been synthesized via successive metallation followed by nucleophilic substitution. In a first step, mono-lithiated calix[4]arenes react with terminal bromoalkanes to give 2-alkylated calix[4]arenes or with CO₂ the respective calixarene-2-carboxylic acid in good yields. A second lithiation step of the monosubstituted products with subsequent attachment of both polar and non-polar substituents yields several new diametrally bridge-disubstituted calix[4]arenes. 2D-NMR measurements establish the disubstituted calixarenes to predominantly adopt the 1,2-alternate conformation in solution. First examples of X-ray crystal structures of the new type of disubstituted calix[4]arenes are described featuring the calix[4]arene also in the rare 1,2-alternate conformation.     

The first versatile synthetic approach to cofacial bis-porphyrins with calixarene spacers

[structure: see text] A versatile stepwise synthetic approach to cofacial bis-porphyrin species with calix[4]arene spacers has been designed. The three examples described demonstrate that the method allows selection, in a tailor-made fashion, of the calix[4]arene conformation, the type of functionalization of the calixarene rims, and the anchoring point of the chromophores on the calix[4]arene spacer.     

Synthesis and crystal structure of uranium(IV) complexes with calix[n]arenes (n = 4, 6 and 8): mononuclear, polynuclear and 1D polymeric species

Reactions of UCl4 with calix[n]arenes (n = 4, 6) in THF gave the mononuclear [UCl2(calix[4]arene - 2H)(THF)2].2THF (.2THF) and the bis-dinuclear [U2Cl2(calix[6]arene - 6H)(THF)3]2.6THF (.6THF) complexes, respectively, while the mono-, di- and trinuclear compounds [Hpy]2[UCl3(calix[4]arene - 3H)].py (.py), [Hpy](4)[U2Cl6(calix[6]arene - 6H)].3py (.3py), [Hpy]3[U2Cl5(calix[6]arene - 6H)(py)].py (.py) and [Hpy]6[U3Cl11(calix[8]arene - 7H)].3py (.3py) were obtained by treatment of UCl4 with calix[n]arenes (n = 4, 6, 8) in pyridine. The sodium salt of calix[8]arene reacted with UCl4 to give the pentanuclear complex [U{U2Cl3(calix[8]arene - 7H)(py)5}2].8py (.8py). Reaction of U(acac)4 (acac = MeCOCHCOMe) with calix[4]arene in pyridine afforded the mononuclear complex [U(acac)2(calix[4]arene - 2H)].4py (.4py) and its treatment with the sodium salt of calix[8]arene led to the formation of the 1D polymer [U2(acac)6(calix[8]arene - 6H)(py)4Na4]n. The sandwich complex [Hpy]2[U(calix[4]arene - 3H)2][OTf].4py (.4py) was obtained by treatment of U(OTf)4 (OTf = OSO2CF3) with calix[4]arene in pyridine. All the complexes have been characterized by X-ray diffraction analysis.     

The Synergistic Extraction of Lanthanide Ions by a Mixture of Calix[4]resorcinarene or its Dimethylamino-, Piperidyl- or Trimethylammoniummethylated Derivatives and 1,10-Phenanthroline in n-Heptanol

The alkylaminomethylatedcalix[4]resorcinarene derivatives, modified bydimethylamino-, piperidyl- and trimethylammoniummoieties, have been synthesised to investigate theirextractability towards lanthanide ions and to comparewith the extractability of calix[4]resorcinarene. Both calix[4]resorcinarene and its derivatives have beenshown to synergistically affect lanthanide ionextraction from neutral aqueous solutions by1,10-phenanthroline through outer-sphere interactionof lanthanide bis-phenanthrolinate cations withdeprotonated forms of calix[4]resorcinarene. Thederivatives with dimethylamino- andpiperidylmethylated moieties are shown to be moreeffective extractants in comparison with theunsubstituted one.     

Tube-type coordination polymers: two- and four-silver(I)-mediated linear networking of calix[4]arene tetracarboxylates

Two calix[4]arene tetracarboxylates, [calix[4]arene tetraacetate (K(4)CTA) and calix[4]arene tetrabenzoate (K(4)CTB)] as their potassium salts, have been prepared. Employing these as precursors, two Ag(I) coordination polymers incorporating calix[4]arene units have been successfully prepared and their X-ray crystal structures have been determined. In these, the CTA and CTB derivatives are linearly bound to two and four silver atoms, respectively, to generate unusual tubular nanostructures. A comparative NMR study was undertaken to investigate the nature of the metal ion blocking of the tube as observed in the CTA-derived structure. The thermal properties for both coordination polymers were also examined.     

Calix[6]pyrrole and hybrid calix[n]furan[m]pyrroles (n+m=6): syntheses and host-guest chemistry

Calix[6]pyrrole 2 and the "hybrid systems" calix[3]furan[3]pyrrole 12, calix[2]furan[4]pyrrole 13, and calix[1]furan[5]pyrrole 14, have been synthesized by increasing conversion of the furan units present in the readily accessible calix[6]furan 3 to pyrroles. The host-guest chemistry of these novel macrocycles towards a number of anions, including halogen ions, dihydrogen phosphate, hydrogen sulfate, nitrate, and cyanide has been investigated in solution by (1)H NMR titration techniques and/or phase transfer experiments. The solid-state structures of the free receptors 2, 12, and 13, the 1:1 complexes of calix[6]pyrrole 2 with chloride and bromide, and the 1:1 complex of 14 with chloride are also reported.