基于聚乙烯醇离子液体负载HRP修饰石墨烯/纳米金复合膜的过氧化氢生物传感器

以石墨烯/纳米金修饰玻碳电极为基底, 用聚乙烯醇与离子液体复合物将辣根过氧化物酶固定于电极表面, 制备了过氧化氢生物传感器. 结果表明, 在0.1 mol/L HAc-NaAc+0.1mol/L KCl(pH=6.5)中, H₂O₂的氧化峰电流与其浓度在9.55×10^-6~6.01×10^-3 mol/L间呈良好线性关系, 检出限(3S/N)为3.3×10^-7 mol/L. 用标准加入法做回收实验, 回收率在93.4%~100.5%之间. 该传感器对H₂O₂具有较高的灵敏度和较低的检测限, 稳定性和重现性良好, 使用寿命较长, 且制作成本低, 可多次重复使用.     

Electrochemical Study and Application on Shikonin at Poly(diallyldimethylammonium chloride) Functionalized Graphene Sheets Modified Glass Carbon Electrode

The electrochemical behaviors of shikonin at a poly(diallyldimethylammonium chloride) functionalized graphene sheets modified glass carbon electrode(PDDA-GS/GCE) have been investigated. Shikonin could exhibit a pair of well-defined redox peaks at the PDDA-GS/GCE located at 0.681 V(E_pa) and 0.662 V(E_pc)[vs. saturated calomel electrode(SCE)] in 0.1 mol/L phosphate buffer solution(pH=2.0) with a peak-to-peak separation of about 20 mV, revealing a fast electron-transfer process. Moreover, the current response was remarkably increased at PDDA-GS/GCE compared with that at the bare GCE. The electrochemical behaviors of shikonin at the modified electrode were investigated. And the results indicate that the reaction involves the transfer of two electrons, accompanied by two protons and the electrochemical process is a diffusional-controlled electrode process. The electrochemical parameters of shikonin at the modified electrode, the electron-transfer coefficient(α), the electron-transfer number(n) and the electrode reaction rate constant(k_s) were calculated to be as 0.53, 2.18 and 3.6 s^-1, respectively. Under the optimal conditions, the peak current of differential pulse voltammetry(DPV) increased linearly with the shikonin concentration in a range from 9.472×10^-8 mol/L to 3.789×10^-6 mol/L with a detection limit of 3.157×10^-8 mol/L. The linear regression equation was I_p=0.7366c+0.7855(R=0.9978; I_p: 10^-7 A, c: 10^-8 mol/L). In addition, the modified glass carbon electrode also exhibited good stability, selectivity and acceptable reproducibility that could be used for the sensitive, simple and rapid determination of shikonin in real samples. Therefore, the present work offers a new way to broaden the analytical application of graphene in pharmaceutical analysis.     

基于纳米金增敏的双酚A二氧化钛凝胶分子印迹电化学传感器的制备及应用

以纳米金(Au NPs)为增敏材料,双酚A(BPA)为模板分子,结合表面溶胶凝胶法和自组装法,制备了BPA纳米金-Ti O_2凝胶分子印迹电化学传感器。利用扫描电子显微镜和能谱对Au NPs进行了表征,利用红外光谱仪对Ti O_2凝胶、BPA以及BPA印迹Ti O_2凝胶进行表征。在最优条件下,该传感器对BPA在1.0×10~(-8)~1.0×10~(-5)mol/L浓度范围内具有良好的线性关系,线性相关系数为0.995,检测限为0.6×10~(-8)mol/L,并将该分子印迹传感器应用于实际样品中BPA的分析检测,其回收率为97.4%~103%。     

Cetyltrimethylammonium Bromide(CTAB)-Ionic Liquid Composite Modified Electrode for Sensitive Cyclic Voltammetric Determination of Bisphenol A

A sensitive electrochemical sensor for determining bisphenol A(BPA) was designed. The sensor was a glassy carbon electrode modified with the surfactant cetyltrimethylammonium bromide and the ionic liquid 1-decyl-3-methylimidazolium tetrafluoroborate. The ability of the new sensor to measure BPA was investigated in cyclic voltammetry experiments. Under optimized conditions, the sensor gave a linear response range for BPA of 2.19×10^-7-3.28×10^-5 mol/L and a detection limit of 7.31×10^-8 mol/L(S/N=3). BPA could be determined with a lower detection limit, a wider linear range, and more sensitivity using the sensor than using other electrochemical sensors or high performance liquid chromatography with UV detection. The new sensor was used to determine BPA in tap water with recoveries of 97.5%-98.7% and a relative standard deviation <2.9%. The results show that the sensor can be used to determine trace BPA concentrations in tap water.     

一步电沉积法构建辣根过氧化物酶传感器

在恒电位沉积钴铝水滑石(CoAl-LDH)时将辣根过氧化物酶(HRP)和碳纳米管(CNTs)固定于基底电极表面,构建CoAl-LDH-HRP-CNTs修饰电极并用于过氧化氢的检测。 利用SEM对电化学沉积的CoAl-LDH-HRP-CNTs的形貌进行了表征。 采用电化学阻抗对所制备的电极进行了表征。 用循环伏安法对电极的电化学行为进行了研究。 探讨了pH值和测定电位对修饰电极的催化还原性能的影响。 该传感器对过氧化氢的检测在2.5×10^-6~3.35×10^-4 mol/L范围内呈良好的线性关系,灵敏度为0.0049 A·L/mol。     

聚邻氨基苯硫酚/纳米金复合膜分子印迹传感器测定2, 4-二氯苯酚

在2,4-二氯苯酚(2,4-DCP)存在下, 在金电极表面自组装邻氨基苯硫酚(oATP)并电聚合oATP/金纳米粒子, 制得2,4-DCP印迹复合膜电化学传感器.采用循环伏安法和交流阻抗技术对传感器制备过程进行了表征, 以K₃Fe(CN)₆为探针, 间接对2,4-DCP进行定量分析.结果表明, 2,4-DCP在5.0×10^-8~1.2×10^-4 mol/L 浓度范围内与K₃Fe(CN)₆示差脉冲伏安曲线的峰电流呈线性关系(R²=0.9964), 检出限为1.5×10^-8 mol/L(S/N=3).该印迹传感器可在几种氯代酚干扰下选择性测定2,4-DCP.利用该传感器对环境水样进行加标回收检测, 回收率为95.2%~109.3%.     

毛细管区带电泳电化学检测法测定药物及果汁中芦丁和L-抗坏血酸

用毛细管区带电泳-电化学检测法同时测定复方芦丁片及果汁中芦丁和L-抗坏血酸的含量.研究了电极电位、电解液浓度和酸度、电泳电压及进样时间等对电泳的影响,得到了较为优化的测定条件.以直径为300μm的碳圆盘电极为检测电极,电极电位为1.0V(vs.SCE),在25mmol/L硼砂-50mmol/LNaH₂PO₄(pH8.0)运行缓冲液中,上述两组分在12min内完全分离.芦丁和L-抗坏血酸浓度分别在1.0×10^-6～2.5×10^-4和5.0×10^-6～2.5×10^-3mol/L范围内与电泳峰电流呈现良好线性关系,检测下限分别为8.0×10^-7和3.3×10^-6mol/L.9次测定含5.0×10^-5mol/L芦丁和2.5×10^-4mol/LL-抗坏血酸的试样溶液,峰高的相对标准偏差分别为2.85%和1.65%,5次测得的平均回收率分别为97.73%和99.68%.     

石英晶体微天平的纳米微球质量放大技术及短序列DNA测定

提出了一种新型质量放大系统用于提高石英晶体微天平检测的灵敏度.将DNA嵌入剂放线菌素D作为导向分子修饰在磁性微球上,通过石英晶体微天平技术识别测定短序列DNA,使最低检测限从6.2×10^-8mol/L下降到2.0×10^-12mol/L.     

Studies on the Voltammetric Behavior of Nicardipine Hydrochloride,its Voltammetric Determination at the Co/GC Modified Electrode

To whom correspondence should be addressed. In a 0.02 mol/L BR buffer solution(pH=5.52), the electrochemical behaviour of nicardipine hydrochloride was studied by linearsweep voltammetry, cyclic voltammetry at a Co/GC ion implantation modified electrode. The experiments showed that the electrode had a good stability, reproductivity. The peak height was proportional to the concentration of nicardipine over the range of 4.0×10^-7—1.0×10^-4 mol/L, the detection limit was 1.0×10^-7 mol/L. This method has been used for the direct determination of nicardipine in tablets. Its recoveries were in the range from 95.6% to 103.8%. The reduction of nicardipine at the Co/GC electrode was an irreversible proccess.     

Electrochemical Behavior of Mitoxantrone and Its Determination at a Pt／C Implanted Modified Microelectrode

In a 0.02 mol/L Na2HPO4-KH2PO4(PBS) buffer solution(pH=6.82), the electrochemical behavior of mitoxantrone was studied by linear-sweep voltammetry and cyclic voltammetry at a Pt/C ion implantation modified microelectrode. A sensitive reduction peak was observed. The peak potential was -0.72 V(vs.SCE), the peak current was proportional to the concentration of mitoxantrone within the ranges of 7.0×10-8-9.0×10-7 mol/L and 1.0×10-6-2.4×10-5 mol/L, with a detection limit of 4.0×10-8 mol/L. The linear correlation coefficients were 0.9994 and 0.9992, respectively. This method has been applied to the direct determination of mitoxantrone in simulated urine. The recoveries were in the range from 96.2% to 105.9%. The reduction process was a quasi-reversible one with adsorptive characteristics at the Pt/C microelectrode. The electrode reaction rate constant ks and the electron transfer coefficient α of the system were determined to be 4.5 and 0.65 s-1, respectively. The experiments showed that Pt element had surely been implanted into the surface of the carbon fiber, and the atomic Pt improved the electrocatalytic activity. The Pt/C microelectrode had a good stability and reproducibility.     

尿酸微生物传感器的研制及其动力学研究

以芽孢杆菌为尿酸氧化反应的酶源,采用氧电极为基础电极,制成尿酸微生物传感器。对细菌的诱导培养条件、电极的工作性能、电极再生以及微生物酶反应动力学行为进行了研究。在pH=8.5时,电极的线性范围为1.0×10^-5～4.0×10^-4 mol/L,检出下限为1.0×10^-6 mol/L,测得微生物膜中尿酸酶的表观米氏常数为2.8×10^-4 mol/l,酶反应活化能为47000J/mol,温度系数为1.8.     

Facile synthesis of enzyme functional metal-organic framework for colorimetric detecting H2O2 and ascorbic acid

In this work,a metal-organic frameworks material MIL-88 was prepared easily using solvent-thermal method,and was first found to have catalytic activities similar to those of biological enzymes such as catalase and peroxidase.The material was characterized by XRD,SEM,TEM,EDX,FT-IR techniques and an N_2 adsorption method.It exhibited peroxidase-like activity through catalytic oxidation of the peroxidase substrate 3,3',5,5'-tetramethylbenzidine(TMB) in the presence of H_2O_2,producing a blue-colored solution.Under optimal conditions,the absorbance at 652 nm is linearly correlated with the concentration of H_2O_2 from 2.0×10~(-6) mol/L to 2.03×10~(-5) mol/L(R~2=0.981) with a detection limit of 5.62×10~(-7) mol/L(S/N=3).More importantly,a sensitive and selective method for ascorbic acid detection was developed using this material as a catalyst.The analytical method for ascorbic acid detection was observed to have a linear range from 2.57×10~(-6) mol/L to 1.01×10~(-5) mol/L(R~2=0.989) with a detection limit of 1.03×10~(-6) mol/L(S/N=3).This work suggests MOFs have advantages of preparing biomimetic catalysts and extends applications of the functional MOFs in the field of biosensor.     

Thin-layered MoS2/polyaniline nanocomposite for highly sensitive electrochemical detection of chloramphenicol

In this study, we synthesized molybdenum disulfide/polyaniline (MoS₂/PANI) nanocomposite via in situ polymerization of aniline in the presence of thin-layered MoS₂. The as-prepared MoS₂/PANI nanocomposite obtained an improved electrochemical performance due to the physisorption interaction between aromatic aniline and the basal plane of MoS₂. Furthermore, we constructed a new kind of electrochemical sensor based on MoS₂/PANI nanocomposite for the detection of chloramphenicol, which showed an excellent performance. The sensor has a high sensitivity and wide detection range from 1×10^-7 mol/L to 1×10^-4 mol/L, with a low detection limit of 6.9×10^-8 mol/L.     

Construction of a PVC based 15-crown-5 electrochemical sensor for Ag(Ⅰ) cation

The macrocyclic ligand,15-crown-5,was used as an ionophore for fabrication of a polyvinyl chloride(PVC) based membrane sensor for Ag(Ⅰ) cation.For construction of the Ag(Ⅰ) cation selective electrode the best response characteristics were obtained using the composition: 15-crown-5/PVC/o-nitrophenyloctylether(NPOE)/sodium tetraphenyl borate(NaTPB) in the percentage ratio of 5.6/30/60.5/3.9(w/w/w/w).The electrochemical sensor shows a linear dynamic range 1.0 10 7–1.0 10 1mol/L and a Nernstian slope of 58.9 0.5 mV/decade with a detection limit of 8.09 10 8mol/L for Ag(Ⅰ) cation.It has a fast response time of 10 s and can be used for at least 8 weeks without any considerable divergences in its potential response.It was successfully used as an indicator electrode in potentiometric titration of Ag(Ⅰ)cation with I and Cl anions and also for the determination of this metal cation in radiology waste water.     

壳聚糖与茜素红相互作用的电化学研究

生物活性大分子蛋白质、DNA及多糖等与小分子探针间的相互作用及其机理是近年来化学、临床医学及生命科学中研究的热点之一,这些研究可用于生物大分子的检测和新药的研发,壳聚糖(CS)是目前自然界已被发现的唯一带正电荷的可食用的碱性多糖,分子中含有丰富的氨基和羟基,并具有双螺旋结构,近年来已在食品、医药保健、化妆、环保、农业及化学化工等领域得到广泛应用,     

Investigations of Thallium(Ⅰ) Underpotential Deposition on the Silver Rotating Disk Electrode and Its Analytical Application

Ｔｈａｌｌｉｕｍｉｓａｔｏｘｉｃｍｅｔａｌ.Ｂｅｃａｕｓｅｉｔｓｃｏｎｃｅｎｔｒａｔｉｏｎｉｎｅｎｖｉｒｏｎｍｅｎｔａｌａｎｄｂｉｏｌｏｇｉｃａｌｓａｍ ｐｌｅｓｉｓｉｎｔｈｅ 1ｎｇ/ｇｒａｎｇｅｏｒｌｅｓｓ[1] ,ｉｔｉｓｄｉｆｆｉｃｕｌｔｔｏｄｅｔｅｒｍｉｎｅｔｈｅｍｅｔａｌｂｙｕｓｉｎｇｃｏｎｖｅｎｔｉｏｎａｌｅｌｅｃｔｒｏａｎａｌｙｓｉｓｍｅｔｈｏｄｓ .Ｄｉｆｆｅｒｅｎｔｉａｌｐｕｌｓｅａｎｏｄｉｃｓｔｒｉｐｐｉｎｇｖｏｌｔａｍｍｅｔｒｙ(ＤＰＡＳＶ )ｉｓａｓｅｎｓｉｔｉｖｅｍｅｔｈｏｄｆｏｒ…     

以天青Ⅰ为介体的纳米金颗粒增强的葡萄糖传感器

采用层层自组装的方法和异种电荷互相吸引的原理,将Nafion修饰在金电极上固载带正电荷的天青Ⅰ,并利用天青Ⅰ中的氨基固载纳米金,再通过纳米金将酶固定在金电极表面,制成了葡萄糖传感器.采用循环伏安法和交流阻抗法,研究了金电极表面组装各层之后的电化学特征,以及电极对葡萄糖的电化学催化作用. 结果表明,天青Ⅰ不仅可以固定酶和纳米金,而且还可以在酶和电极之间有效地传递电子.在优化的实验条件下,该传感器对葡萄糖响应的线性范围为5.1×10-6 ~4.0×10-3 mol/L,检出限(S/N=3)为1.0 μmol/L.该生物传感器显示出较好的稳定性和抗干扰能力,将其用于人体血清中葡萄糖的测定,结果令人满意.     

同步-导数-化学除氧微乳状液增稳室温磷光法测定痕量荧蒽与屈的研究

同步－导数－化学除氧微乳状液增稳室温磷光法测定痕量荧蒽与屈的研究杨欣,董川,晋卫军,魏雁声,刘长松（山西大学化学系,大原,０３０００６）关键词同步－导致－化学除氧微乳液增稳室温磷光法,荧蒽,屈Ｒａｍｏｓ等［１］于１９８８年提出了微乳状液增稳室温磷光法...     

多环芳烃芴、苊的无保护流体室温磷光性质研究

我们[1,2 ]曾报道丹磺酰氯及其衍生物在无保护性介质亦无有机溶剂存在的水溶液中能诱导出强而稳定的室温磷光 (ＲＴＰ) ,并命名为ＮＰ ＲＴＰ[37].此后 ,Ｃａｒｒｅｔｅｒｏ等[810 ]亦发现了萘唑啉、萘氧乙酸和苊溶液在无任何有序介质时的ＲＴＰ发射现象 .在已有的研究中至少有两个问题需进一步探索 :其一 ,除苊外 ,已实现ＮＰ ＲＴＰ发射的化合物都仅具双环结构 ,即萘系化合物 ,对于多环化合物是否有类似的发射特性和随环的增多是否会出现新的特性 ;其二 ,对于无水溶性取代基的多环芳烃 ,因其在水中的溶解度很小 ,所引入的有机溶剂的种类和…     

高压液相色谱磷钼杂多酸修饰电极安培检测儿茶酚胺类神经递质的研究

研究了磷钼杂多酸修饰电极对去甲肾上腺素(NE)、肾上腺素(E)和多巴胺(DA)等儿茶酚胺类神经递质的催化氧化作用,探讨了催化机理,并采用高压液相色谱电化学方法对其进行了分离检测,NE、DA和E的线性范围(mol)依次为8.0×10^-11～2.0×10^-8、8.0×10^-11～2.0×10^-8、4.0×10^-11～2.0×10^-8;检测限(mol))依次为4.0×10^-11、4.0×10^-11、2.0×10^-11.7次平行测定的相对标准偏差(％)依次为1.6、2.0和4.5.将此法用于鼠脑组织中神经递质的测定,获得满意的结果.