Luminescent cyclometalated iridium(III) dipyridoquinoxaline indole complexes as biological probes

Four luminescent cyclometalated iridium(III) dipyridoquinoxaline complexes appended with an indole moiety [Ir(N∧C)₂(N∧N)] (PF₆) (HN∧C = 2-phenylpyridine, Hppy; N∧N = 2-(N-(2-(indole-3-acetamido)ethyl)aminocarbonyl)dipyrido[3,2-f:2′,3′-h]quinoxaline, dpqC2indole (1a), N∧N = 2-(N-(6-(indole-3-acetamido)hexyl)aminocarbonyl)dipyrido[3,2-f:2′,3′-h]quinoxaline, dpqC6indole (1b); HN∧C = 7,8-benzoquinoline, Hbzq, N∧N = dpqC2indole (2a), N∧N = dpqC6indole (2b)) have been synthesized and characterized. Upon irradiation, all the complexes displayed moderately intense and long-lived luminescence under ambient conditions and in 77 K glass. On the basis of the photophysical data, the emission of the complexes has been assigned to an excited state of triplet metal-to-ligand charge-transfer (³MLCT) ((dπ(Ir) → π*(N∧N)) character. Cyclic voltammetric studies revealed indole-based and iridium-based oxidations at ca. +1.10 V and +1.24 V vs. SCE, respectively, and ligand-based reductions at ca. ?1.07 to ?2.29 V vs. SCE. The interactions of the complexes with an indole-binding protein, bovine serum albumin (BSA), have been examined by emission titrations.     

Electrochemiluminescence of cyclometalated iridium (III) complexes

1. Download : Download high-res image (86KB)
2. Download : Download full-size image

     

Cyclometalated iridium(III) diimine bis(biotin) complexes as the first luminescent biotin-based cross-linkers for avidin

Four luminescent cyclometalated iridium(III) diimine complexes [Ir(N-C)2(N-N)](PF6) (HN-C = 2-(4-(N-((2-biotinamido)ethyl)aminomethyl)phenyl)pyridine, Hppy-4-CH2NHC2NH-biotin, N-N = 3,4,7,8-tetramethyl-1,10-phenanthroline, Me4-phen (1a); N-N = 4,7-diphenyl-1,10-phenanthroline, Ph2-phen (2a); HN-C = 2-(4-(N-((6-biotinamido)hexyl)aminomethyl)phenyl)pyridine, Hppy-4-CH2NHC6NH-biotin, N-N = Me4-phen (1b); N-N = Ph2-phen (2b)), each containing two biotin units, have been synthesized and characterized. The photophysical and electrochemical properties of these complexes have been investigated. Photoexcitation of these iridium(III) diimine bis(biotin) complexes in fluid solutions at 298 K and in alcohol glass at 77 K resulted in intense and long-lived luminescence. The emission is assigned to a triplet metal-to-ligand charge-transfer (3MLCT) (d pi(Ir) --> pi*(N-N)) excited state. The emissive states of complexes 1a,b are probably mixed with some 3IL (pi --> pi*) (Me4-phen) character. The interactions of these iridium(III) diimine bis(biotin) complexes with avidin have been studied by 4'-hydroxyazobenzene-2-carboxylic acid (HABA) assays and emission titrations. The potential for these complexes to act as cross-linkers for avidin has been examined by resonance-energy transfer- (RET-) based emission quenching experiments, microscopy studies using avidin-conjugated microspheres, and HPLC analysis.     

Synthesis,photophysical and electrochemical properties,and biological labeling studies of cyclometalated iridium(III) bis(pyridylbenzaldehyde) complexes: novel luminescent cross-linkers for biomolecules

We report the synthesis, characterization, photophysical, and electrochemical properties of a series of luminescent cyclometalated iridium(III) complexes containing two aldehyde functional groups [Ir(pba)(2)(N-N)](PF(6)) (Hpba=4-(2-pyridyl)benzaldehyde; N-N=2,2'-bipyridine, bpy (1), 1,10-phenanthroline, phen (2), 3,4,7,8-tetramethyl-1,10-phenanthroline, 3,4,7,8-Me(4)-phen (3), 4,7-diphenyl-1,10-phenanthroline, 4,7-Ph(2)-phen (4)). The X-ray crystal structure of complex 1 has been investigated. Upon photoexcitation, complexes 1-4 exhibit intense and long-lived emission in fluid solutions at 298 K and in low-temperature glass. The luminescence is assigned to a triplet intra-ligand ((3)IL) excited state associated with the pba(-) ligand, probably with mixing of some triplet metal-to-ligand charge-transfer ((3)MLCT) (dpi(Ir)-->pi*(pba(-))) character. Since each of these complexes possesses two aldehyde groups, which can react with the primary amine groups of biomolecules to form stable secondary amines after reductive amination, we have investigated the possibility of these complexes as novel luminescent cross-linkers for biological substrates. L-Alanine has been labeled with complexes 1-4 to give the luminescent bioconjugates 1-(Ala)(2)-4-(Ala)(2). These conjugates show strong photoluminescence with long emission lifetimes under ambient conditions. On the basis of the emission energy trend, the excited state of these luminescent bioconjugates is likely to bear a high parentage of (3)MLCT (dpi(Ir)-->pi*(N-N)) character. In addition, the glycoprotein avidin (Av) has also been conjugated with complexes 1-4 to give the bioconjugates 1-Av-4-Av. Upon photoexcitation, these bioconjugates also display intense and long-lived (3)MLCT (dpi(Ir)-->pi*(N-N)) emission in aqueous buffer at 298 K. Furthermore, a heterogeneous competitive assay for biotin has been developed using 2-Av and biotinylated microspheres. We have shown that complexes 1-4 represent a new class of multicolor luminescent cross-linkers for biomolecular species.     

Phosphorescent iridium(III) complexes with nonconjugated cyclometalated ligands

A series of blue phosphorescent iridium(III) complexes 1-4 with nonconjugated N-benzylpyrazole ligands were synthesized and their structural, electrochemical, and photophysical properties were investigated. Complexes 1-4 exhibit phosphorescence with yields of 5-45 % in degassed CH2Cl2. Of the compounds, 1 showed emission that was nearly true blue at 460 nm with a lack of vibronic progression. These photophysical data clearly demonstrate that the methylene spacer of the cyclometalated N-benzylpyrazole chelate effectively interrupts the pi conjugation upon reacting with a third L X chelating chromophore. This gives a feasible synthesis for the blue phosphorescent complexes with a sufficiently large energy gap. In another approach, these complexes were investigated for their suitability for the host material in phosphorescent OLEDs. The device was synthesized by using 1 as the host for the green-emitting [Ir(ppy)3] dopant, which exhibits an external quantum conversion efficiency (EQE) of up to 11.4 % photons per electron (and 36.6 cdA(-1)), with 1931 Commission Internationale de L'Eclairage (CIE) coordinates of (0.30, 0.59), a peak power efficiency of 21.7 lmW(-1), and a maximum brightness of 32000 cdm(-2) at 14.5 V. At the practical brightness of 100 cdm(-2), the efficiency remains above 11 % and 18 lmW(-1), demonstrating its great potential as the host material for phosphorescent organic light-emitting diodes.     

Efficient electrogenerated chemiluminescence from cyclometalated iridium(III) complexes

Very efficient electrogenerated chemiluminescence (ECL) phenomena were realized by deliberately tuning electron-transfer reactions from electrochemically generated electron donor to metal complex radical cations. By controlling the relative positions of HOMO and LUMO levels (oxidation potential and reduction potential) of Ir(III) complexes, we could obtain 77 times higher ECL from iridium(III) complexes in the presence of TPA than that of the Ru(bpy)32+/TPA system. This high ECL efficiency of new Ir(III) complexes can be used in many interesting applications such as sensors and luminescent devices.     

Blue phosphorescence from mixed cyano-isocyanide cyclometalated iridium(III) complexes

The synthesis, structure, and photophysical and electrochemical properties of cyclometalated iridium complexes with ancillary cyano and isocyanide ligands are described. In the first synthetic step, cleavage of dichloro-bridged dimers [Ir(N=C)2(mu-Cl)]2 (N=C = 2-phenylpyridine, 2-(2-fluorophenyl)pyridine, and 2-(2,4-difluorophenyl)pyridine) by isocyanide ligands gave monomeric species of the types Ir(N=C)2(RNC)(Cl) (RNC = t-butyl isocyanide, 1,1,3,3-tetramethylbutyl isocyanide, 2-morpholinoethyl isocyanide, and 2,6-dimethylphenyl isocyanide). In turn, the chloride was replaced by cyanide giving Ir(N=C)2(RNC)(CN). The X-ray structures for two of the complexes show that the trans-pyridyl/cis-phenyl geometry of the parent dimer is preserved, with the ancillary ligands positioned trans to the cyclometalated phenyls. The cyano complexes all display strong blue photoluminescence in ambient, deoxygenated solutions with the first lambdamax ranging from 441 to 458 nm, quantum yields spanning 0.60 to 0.75, and luminescent lifetimes of 12.0-21.4 mus. A lack of solvatochromism and highly structured emission indicate that the lowest energy excited state is triplet ligand centered with some admixture of singlet metal-to-ligand charge-transfer character.     

Nucleic acid intercalators and avidin probes derived from luminescent cyclometalated iridium(III)-dipyridoquinoxaline and -dipyridophenazine complexes

Six luminescent cyclometalated iridium(III)-dipyridoquinoxaline and -dipyridophenazine complexes [Ir(ppy)2(N-N)](PF6) (Hppy = 2-phenylpyridine; N-N = dipyrido[3,2-f:2',3'-h]quinoxaline, dpq (1); 2-n-butylamidodipyrido[3,2-f:2',3'-h]quinoxaline, dpqa (2); 2-((2-biotinamido)ethyl)amidodipyrido[3,2-f:2',3'-h]quinoxaline, dpqB (3); dipyrido[3,2-a:2',3'-c]phenazine, dppz (4); benzo[i]dipyrido[3,2-a:2',3'-c]phenazine, dppn (5); 11-((2-biotinamido)ethyl)amidodipyrido[3,2-a:2',3'-c]phenazine, dppzB (6)) have been designed as luminescent intercalators for DNA and probes for avidin. The structure of complex 4 has been studied by X-ray crystallography. The photophysical and electrochemical properties of the complexes have also been investigated. The binding of these complexes to double-stranded calf thymus DNA and synthetic double-stranded oligonucleotides poly(dA) x poly(dT) and poly(dG) x poly(dC) has been investigated by spectroscopic titrations. The interactions between the two biotin-containing complexes and avidin have been studied by 4'-hydroxyazobenzene-2-carboxylic acid (HABA) assays and emission titrations.     

Insights into the luminescent properties of anionic cyclometalated iridium(III) complexes with ligands derived from natural products

In the search of remarkable anionic electroluminescent semiconductors to be applied in energy conversion devices such as Light Emitting Electrochemical Cells, we report the electronic, photophysical, and charge injection/transfer properties of a series of cyclometalated iridium(III) complexes through a DFT/TD‐DFT procedure. The proposed semiconductors involve bidentated ligands based on natural products (salicylic acid and boldine), and phenylpyridine and phenylpyrazole as the cyclometalating units. The proposed compounds emit in the range of 446 to 571 nm, where the boldine based compounds have red‐shifted emissions compared to their analogs with salicylic acid. Blue phosphors were obtained by the use of phenylpyrazole units; however, the ligand field is weak in these cases compared to the ligand field exerted by the phenylpyridine ligands. The latter allows the accessibility to the radiationless states for emitters below 495 nm as a result of the increased stability of the metal centered excited states; consequently, the luminescent quantum yield could be decreased. Conversely, the semiconductors with phenylpyridine units show a restricted accessibility to radiationless processes, which could result in emitters with a high luminescent quantum yield and low non‐radiative constants. Finally, the proposed anionic semiconductors show a better balance between hole/electron transfer rate compared to related cationic Ir(III) complexes; while, the easier hole‐electron injection is favored for semiconductors with salicylic acid and phenylpyridine units.     

Synthesis and characterization of cyclometalated iridium(III) complexes containing pyrimidine-based ligands

New pyrimidine derivatives (pyr) have been synthesized using palladium-catalyzed Suzuki coupling reaction. These compounds can undergo cyclometalation with iridium trichloride to form bis-cyclometalated iridium complexes, (pyr)₂Ir(acac) (acac = acetylacetonate; pyr = cyclometalated pyr). The substituents at the both cyclometalated phenyl ring and pyrimidine ring were found to affect both electrochemical and photophysical properties of the complexes. Computation results on these complexes are consistent with the electrochemical and photophysical data. The complexes are green-emitting with good solution quantum yields at ∼0.30. Light-emitting devices using these complexes as dopants were fabricated, and the device performance at 100 mA/cm² are moderate: 9 (17 481 cd/m², 4.8%, 18 cd/A, 5.1 lm/W); 10 (18 704 cd/m², 4.9%, 18.9 cd/A, 4.7 lm/W); 13 (20 942 cd/m², 5.4%, 21.0 cd/A, 6.1 lm/W).     

Enhanced luminescent iridium(III) complexes bearing aryltriazole cyclometallated ligands

Herein we report the synthesis of 4-aryl-1-benzyl-1H-1,2,3-triazoles (atl), made via "Click chemistry" and their incorporation as cyclometallating ligands into new heteroleptic iridium(III) complexes containing diimine (N(^)N) ancillary ligands 2,2'-bipyridine (bpy) and 4,4'-di-tert-butyl-2,2'-bipyridine (dtBubpy). Depending on decoration, these complexes emit from the yellow to sky blue in acetonitrile (ACN) solution at room temperature (RT). Their emission energies are slightly blue-shifted and their photoluminescent quantum efficiencies are markedly higher (between 25 and 80%) than analogous (C(^)N)(2)Ir(N(^)N)(+) type complexes, where C(^)N is a decorated 2-phenylpyridinato ligand. This increased brilliance is in part due to the presence of the benzyl groups, which act to sterically shield the iridium metal center. X-ray crystallographic analyses of two of the atl complexes corroborate this assertion. Their electrochemistry is reversible, thus making these complexes amenable for inclusion in light-emitting electrochemical cells (LEECs). A parallel computational investigation supports the experimental findings and demonstrates that for all complexes included in this study, the highest occupied molecular orbital (HOMO) is located on both the aryl fragment of the atl ligands and the iridium metal while the lowest unoccupied molecular orbital (LUMO) is located essentially exclusively on the ancillary ligand.     

Synthesis of facial cyclometalated iridium(III) complexes triggered by tripodal ligands

The tripodal ligands composed of the 1,3,5-trisubstituted cyclohexyl moiety as a molecular scaffold and 2-phenylpyridyl moieties as a coordination site were designed. The homoleptic cyclometalated fac-Ir(C^N)(3) complexes could be obtained by the reaction of IrCl(3)·nH(2)O with the designed tripodal ligands. The single crystal X-ray structure determination confirmed the fac configuration and a distorted octahedral geometry with three intramolecular cyclometalated 2-phenylpyridyl ligands surrounding the iridium metal center. Also, the cyclohexyl scaffold was found to serve as a flexible scaffold to induce the fac configuration. The thus-obtained homoleptic cyclometalated fac-Ir(C^N)(3) complexes exhibited a broad emission band in the emission spectra at 298 K.     

Optical response of a cyclometalated iridium(III) hydrazino complex to carbon dioxide: generation of a strongly luminescent iridium(III) carbazate

A system pairing the luminescent core of [Ir(ppy)(2)L(2)](+) (ppy = 2-phenylpyridine) with simple hydrazino ancillary ligands (L = N(2)H(4)) has been prepared for the direct optical detection of carbon dioxide (CO(2)). Silver-assisted and silver-free techniques were used for the successful introduction of N(2)H(4) into the [Ir(ppy)(2)Cl](2) coordination sphere at room temperature to give the corresponding biscyclometalated iridium(III) hydrazino species as either a CF(3)SO(3)(-) (OTf(-), 2a) or Cl(-) (2b) salt. The silver-free route was accomplished by the direct replacement of the ligated Cl(-) using a slight excess of hydrazine. The luminescence profile of the cationic iridium(III) hydrazino complex 2a (λ(max) = 501 nm) undergoes a red shift (λ(max) = 524 nm), accompanied by a change in the peak shape during exposure to CO(2) in solution. The spectral changes observed are attributed to the formation of the corresponding neutral carbazate species Ir(ppy)(2)(H(2)NNHCOO) (3) and are not consistent with protonation of the ligated hydrazine. Conversion of the hydrazino species to the carbazate species is solvent-dependent and irreversible. The hydrazino and carbazate species have been structurally characterized by single-crystal X-ray diffraction; both compounds exhibit long-lived and intense room temperature luminescence in solution with τ = 1.56 and 1.80 μs and φ(em) = 0.42 and 0.45, respectively.     

Emissive iridium(III) diimine complexes formed by double cyclometalation of coordinated triphenylphosphite

We report on the synthesis of a new series of iridium(III) complexes functionalized with various diimine chromophores, together with a facially coordinated dicyclometalated phosphite chelate and a monodentate anionic ancillary. This conceptual design presents a novel strategy in obtaining a new class of iridium(III) diimine complexes without employment of traditional nitrogen-containing polyaromatic cyclometalates. Additionally, we discuss the basic charactersistics of the ground and lower-lying excited states involved, as documented by crystal structural, photophysical studies, and density functional theory calculations. Fabrication of the green-emitting organic light-emitting diodes with one such dopant, [Ir(dbbpy)(tpit)NCS] (2b), where dbbpy and tpit represent di-tert-butyl-2,2'-bipyridine and dicyclometalated triphenylphosphite, respectively, was successfully made, attaining a peak external quantum efficiency (η(ext)), a luminance efficiency (η(l)), and a power efficiency (η(p)) of 14.1%, 46.6 cd A(-1), and 39.9 lm W(-1), respectively.     

Luminescent cyclometalated gold(III) complexes

Many luminescent gold(I) compounds are known, but in the vast majority of gold(III) complexes reported until recently, room temperature emission in fluid solution does not occur. As for other d(8) and d(6) metals, the key to obtaining gold(III) compounds with favorable luminescence properties seems to be the use of cyclometalating ligands that ensure very strong ligand fields. Recent progress in this emerging research field is discussed, and where appropriate, comparison to isoelectronic platinum(II) complexes and their photophysical properties is made.     

Long-range electron and hole transport through DNA with tethered cyclometalated iridium(III) complexes

A cyclometalated complex of Ir(III) is covalently tethered to DNA oligonucleotides and serves as both a photooxidant and photoreductant in the study of DNA-mediated hole transport (HT) and electron transport (ET). Spectroscopic and melting temperature studies support intercalation of the tethered complex into the DNA duplex through the functionalized dppz ligand. Using these tethered assemblies, ET and HT is initiated in DNA by the same photoredox probe. Cyclopropylamine substituted bases, N4-cyclopropylcytosine (CPC) and N2-cyclopropylguanine (CPG) are used as kinetically fast electron and hole traps to probe the resulting electron migration processes after direct irradiation of the tethered Ir assembly. Oxidation of CPG and CPC is promoted efficiently by HT from photoexcited Ir(III) when the modified bases are positioned in the purine strands of the A-tract. In contrast, when CPC is embedded in a pyrimidine tract, ET to yield reductive decomposition is observed. Thus, the Ir(III)-tethered DNA assembly containing cyclopropyl-modified bases provides a unique model system to explore the two DNA-mediated electron migration processes using the same photoredox probe and the same DNA bridge.     

Physicochemical studies of green phosphorescent light-emitting materials from cyclometalated heteroleptic iridium(III) complexes

A series of novel imidazole ligands were synthesized and characterized. Phosphorescence studies of series of heteroleptic cyclometalated iridium(III) complexes reveal that these complexes possess dominantly (3)MLCT and (3)π-π* excited states and the solvent shifts of these complexes are interpreted by Richardt-Dimroth and Marcus solvent functions. The results consistent with prior assignments on the absorption band to a metal-to-ligand charge transfer excited state associated with chelating ligand. Emission kinetic studies exploited that the radiative transition (k(r)), increases with increasing λ(em) and linear correlation exists between ln(k(nr)) and energy gap. Electronic transition theory is applied to study the effect of E(g) and ΔQ(e) on non-radiative transition (k(nr)). With a larger ΔQ(e), favouring vibrational overlap and leading to a larger value for k(nr).