Evaluation of osmium(II) complexes as electron transfer mediators accessible for amperometric glucose sensors.

In order to lower the redox potentials of Os(III/II) complexes, the mixed ligand complexes of Os(II) were synthesized. The redox potentials of Os(III/II) complexes could be lowered by the use of 4,4'-dimethyl-2,2'-bipyridine (dmbpy), imidazole (Him) or its derivatives, and chloride ion as ligands, e.g., values of the redox (formal) potentials of 628 mV vs. Ag/AgCl for [Os(bpy)3]3+/2+ (bpy: 2,2'-bipyridine) and -6 mV for [OsCl(Him)(dmbpy)2]2+/+ were given in deaerated 0.1 mol dm-3 phosphate buffer (pH 7.0). The evaluation of Os(II) complexes as electron transfer mediators accessible for amperometric glucose sensors was examined according to the determination of the redox potentials of Os(III/II) complexes and the second-order rate constants for electron transfer between glucose oxidase (GOx) in reduced form and the Os(III) complex. Although the Os(II) complexes with lower redox potentials tended to decrease the second-order rate constants ks, the ks values for the majority of Os(II) complexes synthesized in this study were greater than that for ferrocenecarboxylic acid. Acceleration of the electron-transfer reaction is attributable to the hydrogen bonding and/or the electrostatic interaction between the Os(II) complexes and GOx. It may be consequently concluded that the mixed ligand complexes of Os(II) with bpy (dmbpy), Him (its derivatives), and Cl- can act as more efficient electron transfer mediators for the fabrication of amperometric glucose sensors.     

Dithiocarboxylate complexes of ruthenium(II) and osmium(II)

The ruthenium(II) complexes [Ru(R)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh) are formed on reaction of IPr·CS(2) with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] (BTD = 2,1,3-benzothiadiazole) or [Ru(C(C≡CPh)=CHPh)Cl(CO)(PPh(3))(2)] in the presence of ammonium hexafluorophosphate. Similarly, the complexes [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) are formed in the same manner when ICy·CS(2) is employed. The ligand IMes·CS(2) reacts with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] to form the compounds [Ru(R)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh). Two osmium analogues, [Os(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) and [Os(C(C≡CPh)=CHPh)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) were also prepared. When the more bulky diisopropylphenyl derivative IDip·CS(2) is used, an unusual product, [Ru(κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IDip)Cl(CO)(PPh(3))(2)](+), with a migrated vinyl group, is obtained. Over extended reaction times, [Ru(CH=CHC(6)H(4)Me-4)Cl(BTD)(CO)(PPh(3))(2)] also reacts with IMes·CS(2) and NH(4)PF(6) to yield the analogous product [Ru{κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IMes}Cl(CO)(PPh(3))(2)](+)via the intermediate [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+). Structural studies are reported for [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)]PF(6) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)]PF(6).     

Redox reactivity of photogenerated osmium(II) complexes

Powerful reductants [Os(II)(NH(3))(5)L](2+) (L = OH(2), CH(3)CN) can be generated upon ultraviolet excitation of relatively inert [Os(II)(NH(3))(5)(N(2))](2+) in aqueous and acetonitrile solutions. Reactions of photogenerated Os(II) complexes with methyl viologen to form methyl viologen radical cation and [Os(III)(NH(3))(5)L](3+) were monitored by transient absorption spectroscopy. Rate constants range from 4.9 × 10(4) M(-1) s(-1) in acetonitrile solution to 3.2 × 10(7) (pH 3) and 2.5 × 10(8) M(-1) s(-1) (pH 12) in aqueous media. Photogeneration of five-coordinate Os(II) complexes opens the way for mechanistic investigations of activation/reduction of CO(2) and other relatively inert molecules.     

Mono- and dinuclear five-coordinate cyclometalated palladium(II) compounds

Reaction of cyclometalated halide-bridged Pd(II) complexes 1-4 with the tertiary triphosphine ligand (Ph2PCH2CH2)2PPh (triphos) yielded complexes [((Ph2PCH2CH2)2PPh-P,P,P)Pd(N(Cy)=(H)C)C6H2(C(H)=N(Cy))Pd((Ph2PCH2CH2)2PPh-P,P,P)][ClO4]2 5, [Pd(C6H4-N=NC6H5)((Ph2PCH2CH2)2PPh-P,P,P)][ClO4] 6, and [Pd(R-C6H3C(H)=NCy)((Ph2PCH2CH2)2PPh-P,P,P)][ClO4] (7; R = 4-CHO, 8; 3-CHO). Spectroscopic and analytic data suggest five-coordination on the palladium atom, which, for complexes 5, 6, and 7, was confirmed by X-ray crystallography. The geometry around palladium may be view as a distorted trigonal bipyramid, with the palladium, nitrogen, and terminal phosphorus atoms in the equatorial plane. Compound 5 is the first doubly cyclometalated palladium(II) compound with two pentacoordinated metal centers. The structure of 6 comprises two discrete cations with slightly different geometries, showing the importance of crystal packing forces in order to determine the coordination arrangement.     

Self-assembled nanostructures with tridentate cyclometalated platinum(II) complexes

Self-assembly of positively charged and charge-neutral tridentate cyclometalated platinum(II) complexes leads to nanowires and the drop-cast film containing these nanowires behaves as a n-type semiconductor.     

Dipolar ruthenium(II) ammine complexes as electron transfer mediators of amperometric glucose sensors

The mediation of dipolar ruthenium(II) ammine complexes containing pyridinium ions [Ru(NH(3))(5)(L(+))](3+)(L(+): pyridinium ions) in glucose oxidation has been investigated by a voltammetric method. These ruthenium(II) complexes had appropriate redox potentials of 0.10-0.18 V vs. Ag/AgCl and high k(s) values of 5.7-17 x 10(6) M(-1) s(-1) which are the second-order rate constants for electron transfer from glucose oxidase in reduced form to [Ru(NH(3))(5)(L(+))](4+). In particular, the k(s) values for [Ru(NH(3))(5)(L(+))](3+) were greater than those of osmium(II)-polypyridine complexes possessing similar redox potentials which are most commonly used. All the dipolar ruthenium(II) complexes used in this study are therefore concluded to be useful for the electron transfer mediators of amperometric glucose sensors.     

Mediated glucose enzyme electrodes by cross-linking films of osmium redox complexes and glucose oxidase on electrodes

Here, we report on a novel, versatile approach for the preparation of mediated enzyme electrodes, demonstrated using cross-linked films of glucose oxidase and a range of functionalised osmium complexes on graphite electrodes. Response of enzyme electrodes are optimised by evaluation of glucose response as a function of variation in ratios of [Os(2,2′-bipyridine)₂(4-aminomethyl pyridine)Cl]⁺ redox mediator, polyallylamine support and glucose oxidase enzyme cross-linked using a di-epoxide reagent in films on graphite. Lowering of the redox potential required to mediate glucose oxidation is achieved by synthesis of complexes using (4,4′-dimethyl-2,2′-bipyridine) or (4,4′-dimethoxy-2,2′-bipyridine) as a ligand instead of (2,2′-bipyridine). Enzyme electrodes prepared using the complexes based on dimethoxy- or dimethyl-substituted bipyridines provide glucose oxidation current densities of 30 and 70 μA?cm^?2 at 0.2 and 0.35 V applied potential compared to 120 μA?cm^?2 at 0.45 V for the initial enzyme electrode, under pseudo-physiological conditions in 5 mM glucose, with stability of signals proving inadequate for long-term operation. Current output and stability may be improved by selection of alternate anchoring and cross-linking methodology, to provide enzyme electrodes capable for application to long-term glucose biosensors and anodes in enzymatic fuel cells.

Advances on supramolecular assembly of cyclometalated platinum(Ⅱ) complexes

Organoplatinum(Ⅱ) compounds have received enormous attention over the past decades due to their square-planar geometry as well as intriguing photo-physical properties.Self-assembly has emerged as an excellent approach to create well-ordered supramolecular architectures with tunable properties,which underpin the role of solvent-directed approach for the design of functional materials.In this minireview,the recent advances on supramolecular self-assembly of cyclometalated platinum(Ⅱ) complexes have been discussed.During the self-assembly process,non-covalent Pt-Pt and π-π interactions play crucial roles in controlling the structures and functions of the resulting assemblies.     

Synthesis and characterization of osmium(II) trispyrazolylborate complexes

Treatment of H2OsBr6 with excess 1,5-cyclooctadiene (cod) in boiling tert-butyl alcohol affords the polymer [OsBr2(cod)]x (1), which reacts with acetonitrile to form the mononuclear adduct OsBr2(cod)(CH3CN)2 (2). Polymer 1 reacts with potassium trispyrazolylborate (KTp) in ethanol to afford the hydride TpOs(cod)H (3) and the bromide complex TpOs(cod)Br (4). Bromide complex 4 reacts with sodium methoxide in methanol to afford TpOs(cod)OMe (5), which has been structurally characterized. Treatment of hydride 3 with methyl trifluoromethanesulfonate (MeOTf) in diethyl ether results in loss of methane and formation of the triflate complex TpOs(cod)OTf (6), which reacts with MgMe2 to give the methyl complex TpOs(cod)Me (7). The addition of bis(dimethylphosphino)methane (dmpm) to the known compound TpOs(PPh3)2Cl yields a mixture of the substitution products TpOs(eta1-dmpm)(PPh3)Cl (8) and TpOs(eta2-dmpm)Cl (9); the latter reacts with methyllithium to generate the methyl compound TpOs(dmpm)Me (10). NMR and IR data for these new compounds are reported. Crystal data for 5.MeOH at -80 degrees C are as follows: monoclinic, P2(1)/n, a = 10.728(1) A, b = 14.004(2) A, c = 13.906(2) A, beta = 102.42(6) degrees , V = 2040.3(5) A3, Z = 4, R(F) = 0.0247 for I > or = 2sigma(I), and R(wF2) = 0.0539 for all data.     

Derivatization of bichromic cyclometalated Ru(II) complexes with hydrophobic substituents

The syntheses and physical properties of cyclometalated Ru(II) complexes containing a triphenylamine (TPA) unit bearing aliphatic groups are reported. Each member of the series consists of an octahedral Ru(II) center coordinated by a tridentate polypyridyl ligand and a tridentate cyclometalating ligand. One of the chelating ligands contains electron-deficient methyl ester groups, while a TPA unit is attached to the central ring of the adjacent chelating ligand through a thiophene bridge. This study builds on our previous work (Inorg. Chem. 2011, 50, 6019-6028; Inorg. Chem. 2011, 50, 5494-5508) by (i) outlining a synthetic protocol for installing aliphatic groups on the TPA substituents, (ii) examining the role that terminal -O-hexyl and -S-hexyl groups situated on the TPA have on the electrochemical properties, and (iii) demonstrating the potential benefit of installing the TPA on the neutral chelating ligand rather than the anionic chelating ligand. The results reported herein provide important synthetic advances for our broader goal of developing bis-tridentate cyclometalated Ru(II) complexes for light-harvesting applications.     

Carbonyl and hydridocarbonyl complexes of ruthenium (II) and osmium (II) with tertiary arsines

Ruthenium halides (Cl and Br) react with monotertiary arsines-Ph₂RAs (R=Me, Et, Pr ⁿ ) in methoxyethanol, in the presence of aq. formaldehyde to give monocarbonyl complexes of ruthenium(II) of the type RuX₂(CO) (Ph₂RAs)₃. Carbonylation of an ethanolic solution containing ruthenium trichloride and the arsine at room temperature yieldtrans dicarbonyl compounds of the formula RuCl₂(CO)₂ (Ph₂RAs)₂. The osmium monocarbonyls OsX₂(CO) (Ph₂RAs)₃ (X=Cl, Br; R=Me, Et) react with NaBH₄ in methanol to yield complexes of the composition OsHX(CO) (Ph₂RAs)₃. The ruthenium analogues RuHCl(CO) (Ph₂RAs)₃ have also been made. Structures have been assigned to all these compounds on the basis of IR and NMR spectral results.     

Substitution reactions involving cyclometalated platinum(II) complexes: Kinetic investigations

Substitution reaction of the labile SMe₂ ligand in the cyclometalated platinum(II) complexes of general formula [PtAr(ppy)(SMe₂)], 1, in which ppy = deprotonated 2-phenylpyridyl and Ar = p-MeC₆H₄ or p-MeOC₆H₄, by several N or P donor reagents were studied; the N-donors, N, are pyridine (Py) and substituted pyridines, N = 4-MePy, Py, Py-d₅, 2-MePy, 3-PhPy, 3,4-Me₂Py, 4-^tBuPy or 3-C(O)OMePy, and the P-donors, L, are phosphines or phosphites, L = P(OPh)₃, P(O-ⁱPr)₃, PPh₃, PPh₂Me and L₂ = Ph₂PCH₂PPh₂, bis(diphenylphosphino)methane (dppm). The products were identified by multinuclear NMR studies as [PtAr(ppy)(N)], 2, or [PtAr(ppy)(L)], 3, respectively. Complexes 1 have a MLCT band in the visible region which was used to easily follow the kinetics of the ligand substitution reactions by UV-vis spectroscopy. Although the complexes 1 contain two cis Pt-C bonds, the substitution reactions followed a normal associative mechanism. The rates of reactions were depended on the concentration and the nature of the entering group. The ΔH^‡/ΔS^‡ compensation plot gave a straight line suggesting the operation of the same mechanism for all entering nucleophiles.     

Photosensitized generation of singlet oxygen from ruthenium(II) and osmium(II) bipyridyl complexes

Photophysical properties for a number ruthenium(II) and osmium(II) bipyridyl complexes are reported in dilute acetonitrile solution. The lifetimes of the excited metal to ligand charge transfer states (MLCT) of the osmium complexes are shorter than for the ruthenium complexes. Rate constants, kq, for quenching of the lowest excited metal to ligand charge transfer states by molecular oxygen are found to be in the range (1.1-7.7) x 10(9) dm3 mol(-1) s(-1). Efficiencies of singlet oxygen production, fDeltaT, following oxygen quenching of the lowest excited states of these ruthenium and osmium complexes are in the range of 0.10-0.72, lower values being associated with those compounds having lower oxidation potentials. The rate constants for quenching of the excited MLCT states, kq, are found to be generally higher for osmium complexes than for ruthenium complexes. Overall quenching rate constants, kq were found to give an inverse correlation with the energy of the excited state being quenched, and also to correlate with the oxidation potentials of the complexes. However, when the contribution of quenching due exclusively to energy transfer to produce singlet oxygen, kq1, is considered, its dependence on the energy of the excited states is more complex. Rate constants for quenching due to energy dissipation of the excited MLCT states without energy transfer, kq3, were found to show a clear correlation with the oxidation potential of the complexes. Factors affecting both the mechanism of oxygen quenching of the excited states and the efficiency of singlet oxygen generation following this quenching are discussed. These factors include the oxidation potential, the energy of the lowest excited state of the complexes and spin-orbit coupling constant of the central metal.     

Tuning the reactivity of osmium(II) and ruthenium(II) arene complexes under physiological conditions

The Os(II) arene ethylenediamine (en) complexes [(eta(6)-biphenyl)Os(en)Cl][Z], Z = BPh(4) (4) and BF(4) (5), are inactive toward A2780 ovarian cancer cells despite 4 being isostructural with an active Ru(II) analogue, 4R. Hydrolysis of 5 occurred 40 times more slowly than 4R. The aqua adduct 5A has a low pK(a) (6.3) compared to that of [(eta(6)-biphenyl)Ru(en)(OH(2))](2+) (7.7) and is therefore largely in the hydroxo form at physiological pH. The rate and extent of reaction of 5 with 9-ethylguanine were also less than those of 4R. We replaced the neutral en ligand by anionic acetylacetonate (acac). The complexes [(eta(6)-arene)Os(acac)Cl], arene = biphenyl (6), benzene (7), and p-cymene (8), adopt piano-stool structures similar to those of the Ru(II) analogues and form weak dimers through intermolecular (arene)C-H...O(acac) H-bonds. Remarkably, these Os(II) acac complexes undergo rapid hydrolysis to produce not only the aqua adduct, [(eta(6)-arene)Os(acac)(OH(2))](+), but also the hydroxo-bridged dimer, [(eta(6)-arene)Os(mu(2)-OH)(3)Os(eta(6)-arene)](+). The pK(a) values for the aqua adducts 6A, 7A, and 8A (7.1, 7.3, and 7.6, respectively) are lower than that for [(eta(6)-p-cymene)Ru(acac)(OH(2))](+) (9.4). Complex 8A rapidly forms adducts with 9-ethylguanine and adenosine, but not with cytidine or thymidine. Despite their reactivity toward nucleobases, complexes 6-8 were inactive toward A549 lung cancer cells. This is attributable to rapid hydrolysis and formation of unreactive hydroxo-bridged dimers which, surprisingly, were the only species present in aqueous solution at biologically relevant concentrations. Hence, the choice of chelating ligand in Os(II) (and Ru(II)) arene complexes can have a dramatic effect on hydrolysis behavior and nucleobase binding and provides a means of tuning the reactivity and the potential for discovery of anticancer complexes.     

Mediated electron transfer of cellobiose dehydrogenase and glucose oxidase at osmium polymer-modified nanoporous gold electrodes

Nanoporous and planar gold electrodes were utilised as supports for the redox enzymes Aspergillus niger glucose oxidase (GOx) and Corynascus thermophilus cellobiose dehydrogenase (CtCDH). Electrodes modified with hydrogels containing enzyme, Os-redox polymers and the cross-linking agent poly(ethylene glycol)diglycidyl ether were used as biosensors for the determination of glucose and lactose. Limits of detection of 6.0 (±0.4), 16.0 (±0.1) and 2.0 (±0.1) μM were obtained for CtCDH-modified lactose and glucose biosensors and GOx-modified glucose biosensors, respectively, at nanoporous gold electrodes. Biofuel cells composed of GOx- and CtCDH-modified gold electrodes were utilised as anodes, together with Myrothecium verrucaria bilirubin oxidase (MvBOD) or Melanocarpus albomyces laccase as cathodes, in biofuel cells. A maximum power density of 41 μW/cm² was obtained for a CtCDH/MvBOD biofuel cell in 5 mM lactose and O₂-saturated buffer (pH 7.4, 0.1 M phosphate, 150 mM NaCl).