Recovery of Metals from Electronic Waste-Printed Circuit Boards by Ionic Liquids,DESs and Organophosphorous-Based Acid Extraction

The extraction of metals from waste printed circuit boards (WPCBs) with ionic liquids (ILs), Deep Eutectic Solvents (DESs) and organophosphorous-based acid (Cyanex 272) has been presented. The study was undertaken to assess the effectiveness of the application of the new leaching liquids, and the new method of extraction of metals from the leachate and the solid phase with or without the leaching process. Solvent extraction from the liquid leachate phase has been studied in detail with popular ILs, such as tetraoctylphosphonium bromide, {[P_8,8,8,8][Br] and tributyltetradecylphosphonium chloride, [P_4,4,4,14][Cl] using Aqueous Biphasic Systems (ABS) method. Trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl) phosphinate, [P_6,6,6,14][Cyanex272], ([P_6,6,6,14][BTMPP]), trihexyltetradecylphosphonium thiocyanate, [P_6,6,6,14][SCN], methyltrioctylammonium chloride (Aliquat 336), as well as bis(2,4,4-trimethylpentyl)phosphinic acid (Cyanex 272) were also used in the extraction of metals from the leachate. Two DESs (1) {choline chloride + lactic acid, 1:2} and (2) {choline chloride + malonic acid, 1:1} were used in the extraction of metals from the solid phase. The extraction behavior of metals with DESs was compared with that performed with three new bi-functional ILs: didecyldimethylammonium salicylate, [N_10,10,1,1][Sal], didecyldimethylammonium bis(2-ethylhexyl) phosphate, [N_10,10,1,1][D2EHPA], and didecyldimethylammonium bis(2,4,4-trimethylpentyl) phosphinate, [N_10,10,1,1][Cyanex272]. The [P_6,6,6,14][Cyanex272]/toluene and (Cyanex 272 + diethyl phosphite ester) mixtures exhibited a high extraction efficiency of about 50–90% for different metal ions from the leachate. High extraction efficiency of about 90–100 wt% with the ABS method using the mixture {[P_8,8,8,8][Br], or [P_4,4,4,14][Cl] + NaCl + H₂O₂ + post-leaching liquid phase} was obtained. The DES 2 revealed the efficiency of copper extraction, E_Cu = 15.8 wt% and silver, E_Ag = 20.1 wt% at pH = 5 from the solid phase after the thermal pre-treatment and acid leaching. The solid phase extraction efficiency after thermal pre-treatment only was (E_Cu = 9.6 wt% and E_Ag = 14.2 wt%). The use of new bi-functional ILs did not improve the efficiency of the extraction of metal ions from the solid phase. Process factors such as solvent concentration, extraction additives, stripping and leaching methods, temperature, pH and liquid/solid as well as organic/water ratios were under control. For all the systems, the selectivity and distribution ratios were described. The proposed extraction processes can represent alternative paths in new technologies for recovering metals from electronic secondary waste.     

Processing and properties of engineering plastics recycled from waste electrical and electronic equipment (WEEE)

The characteristics of engineering plastics used in the preparation of electrical and electronic equipment were studied. More specifically, their thermal response was recorded by DSC experiments, the rheological properties were investigated via MFI tests and the mechanical properties were evaluated with tensile tests. The aim was to establish a procedure for recycling the same engineering plastics deriving from waste of electrical and electronic equipment (WEEE), which offers the additional advantage of using the as-received waste stream as a recyclable mixture, i.e. without sorting and classification of its components.The experimental results showed that blends of PC with ABS or ABS/HIPS can be prepared by direct mixing and this, would allow easy handling of the engineering plastics coming from WEEE, i.e. blending without the need of sorting. These mixtures can be easily processed and display acceptable mechanical properties with reasonable cost. Therefore, the processing characteristics and properties of the systems studied in this work could be the key for the design of an interesting approach for handling solid plastic waste from electrical and electronic devices.     

离子液体中Mn（Salen）催化仲醇的氧化反应研究

以PhI(OAc)2为氧化剂,考察了1,3-二烷基咪唑硫酸酯系列离子液体中Mn(Salen)催化仲醇氧化的反应. 结果表明, 在MMISM-CH2Cl2(1:4,v:v)混合溶剂中, 反应条件为n((-苯乙醇): n(醋酸碘苯): n(催化剂1c)=50: 70: 1时, (-苯乙醇的转化率可以达到97.8%, 产物苯乙酮的选择性为100%, 远高于在纯CH2Cl2中的结果, 也要好于[bmim]BF4和[bmim]PF6对该反应的促进作用. 此外, BMISM及BEISE对催化剂1c有较好的稳定作用,催化剂可以重复使用.     

A Novel Sample Pretreatment Method for the Analysis of Polybrominated Diphenyl Ethers in Polymers of Waste Electrical and Electronic Equipment(WEEE)

A fast sample pretreatment method was developed to determine polybrominated diphenyl ethers (PBDEs) in polymers from waste electrical and electronic equipment (WEEE). Polymers were firstly prepared into "polymer film" to facilitate a complete Soxtec extraction. Then, three extraction parameters (including hot plate temperature, boiling time, and rinsing time) were optimized based on the recovery of target in reference polymer samples. The proposed method was successfully applied to the analysis of PBDEs in standard plastic materials from WEEE and the extraction yields of PBDEs ranged from 78.9% to 91.3%. The detection limits of PBDEs were 0.05–0.10 µg/g, indicating this method can be used as a quality assurance and quality control procedure of PBDEs in the production of electrical and electronic equipment.     

Modification of (Poly)Siloxanes via Hydrosilylation Catalyzed by Rhodium Complex in Ionic Liquids

Summary. The hydrosilylation of 1-heptene, allyl glycidyl ether and, allyl polyether by heptamethylhydrotrisiloxane and poly(hydro, methyl)(dimethyl)siloxane catalyzed by rhodium(I) complexes (particularly [{Rh(μ–OSiMe₃)(cod)}₂]) in imidazolium ionic liquids (especially [TriMIM]MeSO₄) gives heptyl and glycidyloxy functional (poly)siloxanes and silicone polyethers with high yield and selectivity. The catalytic system based on rhodium siloxide can be easily separated from the product and successfully reused up to five times.     

离子液体萃取铂、钯和铑离子的研究进展

铂族金属作为一类不可再生资源,在工业和军工方面有着重要应用,但其在分配和供求上存在严重不均衡,凸显了其资源化回收再利用的重要性.离子液体作为一种性质优良的绿色溶剂,成为科学研究的热点.本文对近年来利用离子液体萃取铂族金属铂、钯和铑等的研究进行了综述,并对其未来的发展方向进行了展望.     

离子液体中Mn(salen)催化环己烯环氧化反应

 研究了离子液体中Mn(salen)络合物催化环己烯的环氧化反应,考察了反应介质、 Mn(salen)络合物催化剂结构和反应条件等对环氧化反应的影响. 在离子液体-CH2Cl2混合溶剂中,以相对廉价的H2O2为氧化剂,得到了高的环己烯转化率和环氧环己烷选择性. 当以邻苯二胺和水杨醛制备的Mn(salen)络合物为催化剂,反应温度为273 K时,在［bmim］BF4-CH2Cl2的混合溶剂中,环己烯的转化率和环氧环己烷选择性分别可达100%和94.0%. 此外,反应结束后,产物可以由正己烷萃取出来,解决了传统均相催化体系中催化剂与产物不易分离的问题.     

超声萃取/HPLC-MS检测电子电气产品聚合物中的六溴环十二烷

通过优化超声萃取时间、萃取次数、萃取溶剂类型等条件,建立了电子电气产品中六溴环十二烷(含α,β,γ3种同分异构体)的高效液相色谱-质谱(HPLC-MS)测定方法。经条件优化,采用甲苯超声萃取样品,重复萃取3次,每次15 min,离心取上清液,合并后经氮气吹干,用甲醇-水溶液重新溶解定容后进行检测。六溴环十二烷各同分异构体的线性范围为50~5 000μg/L,线性相关系数均大于0.999,方法检出限为1 mg/kg,样品加标回收率为88.3%~104.5%。该方法快速、简便、准确、稳定,用于实际样品的检测,阳性样品均为发泡聚苯乙烯材料。     

Determination of Gold(III) by Simplified Room-Temperature Ionic Liquid Extraction with Flame Atomic Absorption Spectrometry

A new simplified extraction of gold(III) using a room-temperature ionic liquid prior to determination by flame atomic absorption spectrometry has been developed. The extraction method uses 1-butyl-3-methylimidazolium hexafluorophosphate without a chelating agent. The parameters of the extraction system were investigated in detail. Under the optimized conditions, a linear range of 0.19 to 38.20 µg · mL^?1, a limit of detection of 0.072 µg · mL^?1, an enrichment factor of 10.0, and an extraction capacity of 6.6 mg · g^?1 were obtained. The extraction mechanism and the selectivity of 1-butyl-3-methylimidazolium hexafluorophosphate for gold(III) were also investigated. The method was applied for the determination of gold(III) in water samples with satisfactory results.     

Combined Application of Ionic Liquid and Hybrid Poly (Ionic Liquid)-Bonded Silica: An Alternative Method for Extraction,Separation and Determination of Flavonoids from Plants

Hybrid poly (ionic liquid)-bonded silica was combined with an ionic liquid solution for the extraction, separation, and determination of flavonoids from natural plants by using a multi-phase dispersive extraction (MPDE) method. The hybrid material was synthesized using a facile method. A suitable sorbent was identified based on the adsorption behaviors of flavonoids on different poly (ionic liquid)-bonded silicas. In contrast to traditional matrix solid-phase dispersion (MSPD) method, the target analytes were first extracted by three-phase (sample-solvent-sorbent) dispersive extraction with ionic liquid (1-oxyl-3-methylimidazolium bromide) solutions as the solvent, and then cleaned up after removal from the sample matrix, called MPDE. This process combines the advantages of ionic liquids, ionic liquid-based sorbent, and MPDE. The recovery rates were achieved by MPDE of the flavonoids from Chamaecyparis obtusa: 76.4% for myricetin and 90.3% for amentoflavone. The proposed method may be used to extract and separate other flavonoids or even polyphenolic compounds from complex samples.     

Adsorption and Purification of Baicalin from Scutellaria baicalensis Georgi Extract by Ionic Liquids (ILs) Grafted Silica

Baicalin which has multiple biological activities is the main active component of the root of Scutellaria baicalensis Georgi (SBG). Although its isolation and purification by adsorption methods have aroused much interest of the scientific community, it suffered from the poor selectivity of the adsorbents. In this work, an environmentally benign method was developed to prepare ionic liquids (ILs) grafted silica by using IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim]NTf₂) and ethanol as reaction media. The IL 1-propyl-3-methylimidazolium chloride ([C₃mim]Cl) grafted silica ([C₃mim]⁺Cl⁻@SiO₂) was used to adsorb and purify baicalin from the root extract of Scutellaria baicalensis Georgi (SBG). Experimental results indicated that the adsorption equilibrium can be quickly achieved (within 10 min). The adsorption behavior of [C₃mim]⁺Cl⁻@SiO₂ for baicalin was in good agreement with Langmuir and Freundlich models and the adsorption was a physisorption process as suggested by Dubinin–Radushkevich model. Compared with commercial resins, [C₃mim]⁺Cl⁻@SiO₂ showed the strongest adsorption ability and highest selectivity. After desorption and crystallization, a purity of baicalin as high as 96.5% could be obtained. These results indicated that the ILs grafted silica materials were promising adsorbents for the adsorption and purification of baicalin and showed huge potential in the purification of other bioactive compounds from natural sources.     

A Total Solution to Baseline Separation of 20 Brominated Flame Retardant Additives in Electronic Products with Automated Soxhlet Hot Extraction and Gas Chromatography‐Mass Spectrometry

An efficient and reliable separation technique based on automated Soxhlet hot extraction (AHSE) was developed and validated. It can be applied to rapid separations of 20 persistent organic pollutants, including two types of brominated flame retardants (BFRs), polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) contained in nonmetallic component parts of electronic products. The qualitative chromatographic analyses were carried out by using a gas chromatography coupled with a mass spectrometry detector (GC‐MS). The 20 persistent organic pollutants were simultaneously and completely separated by a 15 meter HP‐5MS short capillary column in 25 minutes. Through the tests of extraction performance, effects of solvent and extraction time on selected BFRs were investigated; toluene and 120 min extraction time were chose as the optimum conditions. Besides, this article examines the influence of temperature on the chromatographic analysis, the optimum temperature parameters were 280 °C and 320 °C for injector and column, respectively. The ASHE‐GCMS method was validated for the analysis of the certified reference material of CRM8110‐a and IRMM310. The limits of detection (LOD) for polymer sample was 0.55‐4.50 μg mL^?1; linearity range from 0.11 to 16 μg mL^?1. The proposed methodology can fully meet the requirement of relational directives.     

离子液体中Au(111)和Pt(111)表面Ge欠电位沉积的现场STM研究

本文研究BMIPF₆离子液体中Au(111)和Pt(111)表面Ge的电沉积行为. 循环伏安法测试结果表明,在含0.1 mol·L^-1 GeCl₄的BMIPF₆溶液Au(111)和Pt(111)表面均有两个与Ge沉积过程相关的还原峰. 第一个还原峰包含了Ge⁴⁺还原成Ge²⁺及Ge的欠电位沉积,第二个还原峰对应Ge的本体沉积. 现场扫描隧道显微镜研究结果表明,Ge在Au(111)和Pt(111)表面均有两层欠电位沉积. 第一层欠电位沉积厚度约为0.25 nm、形貌平整、带有缝隙的亚单层结构. 第二层欠电位沉积形貌相对粗糙的点状团簇结构. 该欠电位沉积过程伴随表面合金化.     

Properties of Poly(sodium 4‐styrenesulfonate)‐Ionic Liquid Composite Film and Its Application in the Determination of Trace Metals Combined with Bismuth Film Electrode

A new kind of bismuth film modified electrode to sensitively detect trace metal ions based on incorporating highly conductive ionic liquids 1‐butyl‐3‐methyl‐imidazolium hexafluorophosphate (BMIMPF₆) in solid matrices at glassy carbon (GC) was investigated. Poly(sodium 4‐styrenesulfonate) (PSS), silica, and Nafion were selected as the solid matrices. The electrochemical properties of the mixed films modified GC were evaluated. The electron transfer rate of Fe(CN)₆^4?/Fe(CN)₆^3? can be effectively improved at the PSS‐BMIMPF₆ modified GC. The bismuth modified PSS‐BMIMPF₆ composite film electrodes (GC/PSS‐BMIMPF₆/BiFEs) displayed high mechanical stability and sensitive stripping voltammetric performances for the determination of trace metal cations. The GC/PSS‐BMIMPF₆/BiFE exhibited well linear response to both Cd(II) and Pb(II) over a concentration range from 1.0 to 50 μg L^?1. And the detection limits were 0.07 μg L^?1 for Cd(II) and 0.09 μg L^?1 for Pb(II) based on three times the standard deviation of the baseline with a preconcentration time of 120 s, respectively. Finally, the GC/PSS‐BMIMPF₆/BiFEs were successfully applied to the determination of Cd(II) and Pb(II) in real sample, and the results of present method agreed well with those of atomic absorption spectroscopy.     

Phenyliodine(III) Bis(Trifluoroacetate) Mediated Synthesis of 2‐Aryl‐1,2‐Benzisothiazol‐3(2H)‐Ones in Ionic Liquid

Treatment of N‐aryl‐2‐(benzylthio)benzamides with phenyliodine(III) bis(trifluoroacetate) containing trifluoroacetic acid resulted in an interrupted Pummerer‐type reaction in ionic liquid 1‐n‐butyl‐3‐methylimidazolium hexafluorophosphate, [bmim][PF₆] to give 2‐aryl‐1,2‐benzisothiazol‐3(2H)‐ones rather than the normal Pummerer‐type products.     

离子液体中Yb(OTf)_3催化下喹唑啉酮衍生物的绿色合成

以邻氨基苯甲酰胺和芳醛为原料,离子液体[BMIm]Br为溶剂,Yb(OTf)3为催化剂室温下合成了一系列的2-芳基-2,3-二氢化喹唑啉-4-(1H)-酮衍生物.和其他方法相比,该方法具有反应条件温和、产率高(85%～96%)、环境友好等优点.产物的结构通过熔点,IR,1H NMR和高分辨质谱分析确证.     

Molecularly Imprinted Polymers Modified by Deep Eutectic Solvents and Ionic Liquids with Two Templates for the Simultaneous Solid-Phase Extraction of Fucoidan and Laminarin from Marine Kelp

Molecularly imprinted polymers modified by deep eutectic solvents and ionic liquids (ILs) were prepared as packing materials for the solid-phase extraction (SPE) of fucoidan and laminarin. The prepared materials were characterized by field emission scanning electron microscopy and Fourier transform infrared spectroscopy. The polymers modified by the deep eutectic solvent prepared by choline chloride and urea had the best extraction efficiencies for fucoidan and laminarin (95.5% and 87.6%, respectively) from marine kelp. The relative standard deviations for intraday and interday determination were less than 4.23%. The molecularly imprinted polymers modified by deep eutectic solvents and ILs showed outstanding applications for SPE and may offer novel sample pretreatment for other analytes.     

Extraction chromatographic studies of Ti(IV) with cyanex 301 as impregnant—Recovery from red mud

Summary A silica gel column impregnated with bis-(2,4,4-trimethylpentyl)dithiophosphinic acid has been studied for the uptake of Ti(IV). Its chemical stability has been examined and its regeneration power checked. The stoichiometry of the extracted species is proposed and the loading capacity of the column material for Ti(IV) assessed. Some important binary separations of Ti(IV) from commonly associated metal ions have been achieved and the column has been used to recover high-purity titanium from red mud, a secondary sector material.     

以离子液体为流动相添加剂高效液相色谱法分离钩藤药材中的钩藤碱和异钩藤碱

以常用流动相添加剂三乙胺作为对照,建立了以离子液体为流动相添加剂,分离钩藤药材中钩藤碱和异钩藤碱的高效液相色谱方法。以分离度及相关色谱参数为指标,选择了离子液体中咪唑阳离子烷基链长度及阴离子的种类。并分别考察了咪唑阳离子烷基链长度、离子液体浓度、流动相pH值和流动相比例对钩藤碱和异钩藤碱分离的影响,初步探讨了离子液体的分离机理。结果显示,咪唑阳离子的烷基链越长,阴离子的离子液体序列越高,分离效果越好,即[HMIM][BF_4]为最优的流动相添加剂。当[HMIM][BF_4]浓度为16 mmol/L,流动相pH值为3.0,甲醇比例为37%时,钩藤碱和异钩藤碱能够实现基线分离,满足样品分离测定的需求。