热剥离法制备石墨烯纳米片对Pb2+和Cd2+的吸附

石墨粉氧化后,在氮气气氛下,快速高温剥离制得石墨烯纳米片。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(HRTEM)、拉曼(Raman)光谱、傅里叶变换红外(FT-IR)光谱和氮气吸附-脱附等分析手段对石墨烯样品进行了表征。这些分析测试结果显示:石墨烯样品主要由很薄的1-4层石墨组成,呈褶皱状态,比表面积为628.5 m²·g^-1。研究了石墨烯吸附水溶液中的Pb²⁺和Cd²⁺的pH值、吸附时间、吸附温度和金属离子初始浓度等影响因素, Pb²⁺和Cd²⁺的最大吸附量分别为460.20和72.39 mg·g^-1。结果表明,热剥离法制得的高质量石墨烯纳米片可以作为一种高效的从水中去除Pb²⁺和Cd²⁺的吸附材料。     

离子强度对膨润土/木质素磺酸钠接枝丙烯酰胺-马来酸酐复合吸附树脂吸附Pb2+/Cu2+的影响

为揭示外加电解质离子强度对重金属离子吸附的影响规律与内在机制, 制备了膨润土/木质素磺酸钠接枝丙烯酰胺-马来酸酐复合吸附树脂(BLPAMA), 研究了外加电解质离子强度对BLPAMA吸附单一和二元Pb²⁺/Cu²⁺的影响规律, 以及有、无外加0.2 mol/L NaNO₃时BLPAMA对二元Pb²⁺/Cu²⁺的吸附等温线、吸附热力学及吸附动力学。 结果表明, 在单一Pb²⁺或Cu²⁺溶液中, 随离子强度增加, Pb²⁺和Cu²⁺吸附量降低;在二元Pb²⁺/Cu²⁺溶液中, 随离子强度增加, Pb²⁺吸附量降低而Cu²⁺吸附量提高。     

Adsorption of Heavy Metal Ions from Aqueous Solutions by Zeolite Based on Oil Shale Ash: Kinetic and Equilibrium Studies

Na-A zeolite was successfully synthesized via the alkaline fusion method with oil shale ash as the raw material. The adsorption capacity of it was tested by removing Cu²⁺, Ni²⁺, Pb²⁺ and Cd²⁺ from aqueous solutions. The results reveal the maximum adsorption capacity of adsorbent for Pb²⁺, Cu²⁺, Cd²⁺ and Ni²⁺ were 224.72, 156.74, 118.34 and 53.02 mg/g, respectively. The effects of contact time and pH value of solutions on the adsorption efficiency of the zeolite were evaluated. Besides, The equilibrium adsorption data and the batch kinetic data were correlated with Langmuir and Freundlich models and the pseudo-first-order and pseudo-second-order models separately. The results show that the Langmuir isotherm and the pseudo-second-order equation were more suitable for the adsorption of Na-A zeolite for the metal ions. In addition, Thermodynamic parameters of the adsorption(the Gibbs free energy, entropy, and enthalpy) were also evaluated and discussed. The results demonstrate that the adsorption process was spontaneous and endothermic under natural conditions and the synthesized zeolite was an effective adsorbent for the removal of metal ions from aqueous solution.     

Fast removal of Pb2+ from water using new chelating fiber modified with acylamino and amino groups

The graft copolymerization of acrylic acid（AA） onto polyethylene glycol terephthalate（PET） fiber initiated by benzoy peroxide （BPO） was carried out in heterogeneous media.Moreover,modification of the grafted PET fiber（PET-AA） was done by changing the carboxyl group into acylamino and amino groups through the reaction with ethylenediamine.The new modified chelating fiber （NDWJN6） was characterized using elementary analysis,SEM and FT-IR spectroscopy.Adsorption kinetic curve indicated that NDWJN6 could fastly remove Pb²⁺ from water,and adsorption isotherm also indicated that NDWJN6 had high equilibrium adsorption capacity for Pb²⁺.     

改性氧化石墨烯去除重金属离子的分子动力学模拟

通过硅烷化反应在氧化石墨烯(Graphene oxide, GO) 表面嫁接螯合官能团N-(三甲氧基硅丙烷)乙二胺三酸(EDTA-Si), 得到改性氧化石墨烯(GO-EDTA), 采用分子动力学模拟在分子水平上研究了Pb²⁺在GO-EDTA 表面的动态吸附分布、 构象及动力学性质, 比较了Pb²⁺和单价Na⁺离子在氧化石墨烯上的吸附行为, 模拟了GO-EDTA与Ca²⁺相互作用, 与Pb²⁺的吸附行为进行了对比. 模拟结果表明, Pb²⁺和Na⁺的吸附位点是GO-EDTA 体系中的羧基, 而非氧化石墨烯表面的羟基; Pb²⁺和 Na⁺ 与羧基的吸附构象不同, 前者吸附构象以摩尔比2:1为主, 即两个羧基对一个Pb²⁺离子, 而后者更多倾向于摩尔比1:1的吸附模式, 即一个羧基对一个Na⁺离子; Pb²⁺离子相对于Ca²⁺和Na⁺离子, 形成的COO^--Pb²⁺离子对构象越过的能垒最低, 但是破坏该离子对构象时能垒较高, 表明Pb²⁺离子在氧化石墨烯膜上表现出良好的吸附性.     

A Novel Hollow Carbon@MnO2 Electrospun Nanofiber Adsorbent for Efficient Removal of Pb2+ in Wastewater

Lead ion(Pb²⁺) is one of the most hazardous heavy metal ions in aquatic environments. Carbon materials and manganese dio-xide(MnO₂) have been shown to be prospective adsorbents to cope with the lead pollution. In this study, a novel hollow carbon@MnO₂ composite nanofiber adsorbent was prepared by the combination of electrospinning and carbonization. The PAN nanofiber membrane is subjected to a pre-oxidation and carbonization process, and then the obtained carbon nanofibers react with KMnO₄ solution during the hydrothermal process to develop the hollow carbon@MnO₂ nanofibers. The hollow carbon@MnO₂ nanofibers displayed a higher adsorption capacity of Pb²⁺ than carbon and MnO₂/PDA/PAN nanofibers. The maximum adsorption capacity toward Pb²⁺ by hollow carbon@MnO₂ nanofibers was 460.83 mg/g. After 5 adsorption-desorption cycles, the carbon@MnO₂nanofibers had a good recyclability and the removal efficiency remained 81.47%. Moreover, the removal efficiency of the hollow composite nanofibers for Pb²⁺ from real wastewater could reach 94.37%. This work shows a strategy for synthetics of the hollow carbon@MnO₂ nanofibers, which exhibits a promising potential in actual wastewater treatment.     

板栗内皮对水溶液中镉离子和铅离子的吸附

研究了板栗内皮对水溶液中金属离子(Cd2+,Pb2+)的吸附过程,以及吸附过程中不同条件对其吸附能力的影响.通过对反应时间、温度、pH、初始金属离子浓度等因素的控制,设计不同单一变量确定在不同条件下的吸附能力,利用红外光谱确定板栗内皮上参与反应的主要基团.结果表明,板栗内皮吸附Cd2+,Pb2+理论最佳吸附条件分别为p...     

磁性碳纳米管表面新型镉离子印迹聚合物制备及其对大米中的镉离子富集

以苯胺修饰的磁性碳纳米管为基质,Cd²⁺为模板,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在碳纳米管表面制备出一种新型磁性Cd²⁺印迹聚合物(MWNTs/MIIPs)。 采用扫描电子显微镜和红外光谱等技术手段对其形态和化学结构等进行详细表征。 吸附试验结果表明,该磁性印迹材料对Cd²⁺离子具有良好的吸附能力,最大吸附量为16.96 mg/g;选择吸附试验结果表明,该磁性印迹材料对Cd²⁺/Cu²⁺、Cd²⁺/Ni²⁺、Cd²⁺/Pb²⁺和Cd²⁺/Cr³⁺的相对选择因子分别是2.03、2.35、2.16和2.13。 结合原子吸收光谱分析技术,该材料MWNTs/MIIPs可用于大米中的Cd²⁺快速分离富集检测。     

丁二酸酐接枝纤维素纳米纤维膜及其重金属离子吸附

采用热致相分离(TIPS)法以三醋酸纤维素(TCA)为原料成功制备直径为(110±28)nm TCA多孔纳米纤维膜。将TCA纤维膜通过水解转化为纤维素(Cell)、接枝制备丁二酸酐接枝改性纤维素(Cell-g-SAA)膜。将Cell膜和Cell-g-SAA膜用于吸附水中Cu~(2+)、Pb~(2+),并对膜样品的吸附动力学、等温吸附和吸附热力学进行了研究。结果表明,二级动力学拟合和Langmuir模型更适合于该体系。与Cell膜相比,改性后Cell-g-SAA膜对Cu~(2+)和Pb~(2+)的最大吸附容量分别从51.73和34.29 mg/g增加到116.41和51.73 mg/g。纤维膜对Cu~(2+)、Pb~(2+)的吸附更趋近于单层吸附且化学吸附占主导地位。     

蒙脱土表面键合配位体固相萃取填料的制备及其对重金属离子的吸附性能

通过酸洗、硅烷偶联剂表面活化、键合苯甲酰异硫氰酸酯对蒙脱土进行改性,制得新型固相萃取(SPE)材料。 采用红外光谱、扫描电子显微镜、X射线光电子能谱表征了改性蒙脱土的结构和形貌。 考察了制备的SPE填料对水中As³⁺、Bi³⁺、Cu²⁺、Sb³⁺、Sn²⁺和Pb²⁺的吸附性能,确定了最佳固相萃取条件,对6种金属离子吸附容量分别为10.83、11.92、12.67、10.43、10.01及10.54 mg/g。 通过SPE与电感耦合等离子体质谱联用测定了样品中As³⁺、Bi³⁺、Cu²⁺、Sb³⁺、Sn²⁺和Pb²⁺ 6种重金属离子的含量,检出限分别为0.024、0.013、0.075、0.037、0.011和0.064 μg/L。     

Adsorption Mechanism of Composite Whisker on Copper Ions and Lead Ions

A new kind of inorganic composite adsorbent based on chitin whiskers(CHW) and potassium tetratitanate whiskers(PTW) was synthesized via the thermal deposition to remove Cu²⁺ and Pb²⁺ from wastewater. CHW could be successfully coated on the surface of PTW when thermal treated 8 times. The adsorption process was better fitted with the Langmuir and Freundlich models. The adsorption process was more conformed to the Pseudo-second-order model. The results from XPS(X-ray photoelectron spectrum) further show that the adsorption mechanism between CHW-PTW and Cu²⁺, Pb²⁺ are both ion exchange and chemical adsorption. Thermodynamic parameters suggest that the adsorption processes are nonspontaneous. The adsorption of Cu²⁺ and Pb²⁺ is endothermic and exothermic, respectively.     

7种胺基键合硅胶的制备及其对重金属Pb2+的吸附

制备了氨丙基键合硅胶（SiO₂-N）、乙二胺-N-丙基键合硅胶（SiO₂-2N）、二乙烯三胺基键合硅胶（SiO₂-3N）、三乙烯四胺基键合硅胶（SiO₂-4N）、四乙烯五胺基键合硅胶（SiO₂-5N）、五乙烯六胺基键合硅胶（SiO₂-6N）和聚乙烯亚胺基键合硅胶（SiO₂-nN）,一步法制备的SiO₂-N和SiO₂-2N的胺基键合密度高达2.07 mmol/g和1.71mmol/g,两步法制备的SiO₂-nN的胺基键合密度为0.02mmol/g,其余胺基键合硅胶中胺基密度约为0.50mmol/g。这7种胺基键合硅胶被用于水溶液中常见重金属离子Pb²⁺的吸附研究。结果表明,在30℃条件下,分别加入10 mL 400 mg/L的Pb²⁺溶液（pH 5）和20 mg胺基键合硅胶进行吸附,10 h后,Pb²⁺吸附量达到最大,吸附过程符合Freundlich等温方程。SiO₂-N、SiO₂-2N、SiO₂-3N、SiO₂-4N、SiO₂-5N、SiO₂-6N和SiO₂-nN对Pb²⁺的吸附量依次为131.28、138.98、85.37、75.22、61.87、79.12和114.06 mg/g,这些胺基键合硅胶在吸附Pb²⁺方面均非常具有潜力。     

Efficiency of Cd(II) removal from aqueous media using chemically modified polystyrene foam

The removal of Cd(II) using polystyrene foam chemically modified with 2,2′-bipyridine has been investigated. The modified polystyrene foam has been characterized by FT-IR spectroscopy, thermogravimetry, elemental analysis and scanning electron microscopy. The solid was employed as a Cd(II) adsorption from aqueous solutions at room temperature. The effects of several variables (pH, shaking speed, agitation time, metal concentration and presence of other ions in the medium) have been studied using batch technique. Flame atomic absorption spectrometry was used to determine the Cd(II) ion concentration in the filtrate after the adsorption process. Maximum sorption 90% was achieved at pH 7 after 30 min of shaking time. Sorbed metal ions have been desorbed with 5 ml of 2 M HNO₃ with the detection limit of 16.7 ng ml⁻¹. The Langmuir, Freundlich and D–R isotherm equation were used to describe partitioning behavior of the system at room temperature. Kinetic and thermodynamic behavior of modified polystyrene foam for Cd(II) ion removal was also studied. Br⁻, PO₄³⁻, Pb²⁺, Ni²⁺ and Cr(VI) suppress the sorption to some extent. The possible sorption mechanism of Cd(II) ions onto modified sorbent is also discussed. Method was utilized to remove Cd(II) ions from aqueous media.     

Evaluation of dithiocarbamates and beta-diketones as chelating agents in supercritical fluid extraction of Cd, Pb, and Hg from solid samples

The use of four dithiocarbamates and three fluorinated β-diketones as potential chelating agents for three transition metal ions (Cd²⁺, Pb²⁺, and Hg²⁺) extracted from spiked sand and filter paper samples by supercritical fluid extraction (SFE) was investigated. The extractions were performed at 45°C and 250 atm for spiked sand samples and at 60°C and 200 atm for filter paper samples using supercritical carbon dioxide modified with 5% methanol. At 250 atm and using carbon dioxide modified with 5% methanol, the recoveries of Cd²⁺, Pb²⁺, and Hg²⁺ ions from spiked sand samples were 95% with lithium bis(trifluoroethyl)dithiocarbamate (LiFDDC) as the chelating agent; they ranged from 83–97% with diethylammonium diethyldithiocarbamate and from 87–97% with sodium di-ethyldithiocarbamate as chelating agents, and from 68–96% with trifluoracetylacetone, hexafluoroacetylacetone, and thenoylfluoroacetone as chelating agents. Ammonium pyrrolidinedithiocarbamate was not effective in the chelation SFE of Cd²⁺, Pb²⁺, and Hg²⁺ ions from either spiked sand or spiked filter paper samples under the extraction conditions used. Supercritical carbon dioxide alone gave consistently lower analyte recoveries than supercritical carbon dioxide modified with 5% methanol. The results suggest that the solubility of the metal chelate in the supercritical fluid plays a more important role than the solubility of the chelating agent in the supercritical fluid, as long as sufficient chelating agent is present in the fluid phase. Fluorination of the chelating agent, as in the case of LiFDDC, increases the solubility of the metal chelate, and subsequently enhances the extraction efficiency for the metal ions.     

Pb2+和Zn2+对亲水型光敏热成像材料感光性能和存储稳定性能的影响

分别研究了Pb²⁺和Zn²⁺对以聚乙烯醇(PVA)为粘合剂的亲水型光敏热成像(PTG)材料的感光性能以及老化稳定性能的影响.实验结果表明,涂布液中加入Pb²⁺或Zn²⁺后,PTG材料的热显影灰雾和相对感光度均明显降低,并且随着离子加入量的增加,下降程度更加显著.另外,含有Pb²⁺或Zn²⁺的PTG材料在经过不同时间的老化后,与未老化PTG材料相比,其热显影灰雾缓慢增加,相对感光度也略有上升.     

Study on the controllable synthesis of SH-MCM-41 mesoporous materials and their adsorption properties of the La3+, Gd3+ and Yb3+

SH-MCM-41 was examined in adsorption and desorption experiments to investigate the adsorption capacities of La³⁺, Gd³⁺ and Yb³⁺ and the reusability.     

SiO2@松香基阳离子交换树脂对水中微量Cd吸附

以硅胶为核,马来海松酸丙烯酸乙二醇酯和甲基丙烯酸为功能单体,采用涂覆悬浮聚合法合成了核壳型SiO₂@松香基阳离子交换树脂(SiO₂@RCER),研究了其对水中微量Cd²⁺的静态吸附性能。结果表明,在Cd²⁺溶液浓度为0.5 mg·L^-1,pH=6.0,温度为303 K,吸附剂用量为10 g·L^-1时,Cd²⁺去除率可达到100%;SiO₂@RCER对Cd²⁺的吸附符合准二级动力学方程以及Langmuir吸附等温线,表明吸附过程为单分子层化学吸附。吸附前后材料的XPS图谱表明:SiO₂@RCER对Cd²⁺吸附主要涉及Na⁺以及溶液中的Cd²⁺的阳离子交换。该吸附剂在对Cd²⁺、Pb²⁺浓度超标的矿区废水吸附处理后,高毒重金属浓度均达到国家生活饮用水水源水质一级标准(CJ3020-93),其他离子浓度也有所降低。     

Chelating Properties of Salicylhydroxamic Acid-functionalized Polystyrene Resins and Its Application to Efficient Removal of Heavy Metal Ions from Aqueous Solutions

Salicylhydroxamic acid(SHA) was covalently bound onto crosslinked polystyrene spheres(CPSs) via the Friedel-Crafts alkylation reaction between chloromethylated CPSs and SHA in the presence of SnCl4 as the Lewis acid catalyst. The resulted SHA-CPSs possessed very strong chelating ability for heavy metal ions. In particular, the saturated adsorption amount of SHA-CPSs for Cu²⁺ ions could reach as high as 34.2 mg/g at 318 K. The chelating capability of SHA-CPSs towards heavy metal ions was pH and temperature dependent. SHA-CPSs also showed selective metal coordination with the chelating capacity decreasing in the order of Cu²⁺>Zn²⁺>>Pb²⁺. The adsorption isotherms conformed well to the Langmuir model, and the adsorption process was found to be entropy-driven and endothermic. Besides, SHA-CPSs possessed the excellent reusability.     

铈锆复合氧化物修饰电极的制备及用于水样中Pb2+的检测

铅是一种有毒重金属,广泛分布在自然界中,会影响生态环境以及损害人体健康,因此对铅离子的检测十分必要。采用水热法制备了Ce₂Zr₂O_7.04纳米复合材料,将其滴涂在玻碳电极上制成修饰电极。采用X射线衍射仪（XRD）、扫描电子显微镜（SEM）和X射线光电子能谱（XPS）分别对材料的组成、形貌、价态进行了表征。使用方波阳极溶出伏安法（SWASV）对Pb²⁺进行检测,发现该修饰电极对Pb²⁺具有良好的电流响应,同时对缓冲溶液、除氧时间、富集电位和pH值等条件进行了优化。结果表明,在优化的测试条件下,该修饰电极对Pb²⁺的检测线性范围为0.0025~3.5 μmol/L,检测限（LOD）（3S/N）为0.198 nmol/L,回收率在97.6％~104.4％之间。应用于水样中Pb²⁺的检测表现出良好的重现性、稳定性和抗干扰能力,为水样中Pb²⁺的检测提供了一种新的方法。     

基于硫代黄素T诱导G-四联体构成的生物传感器检测铅离子

硫代黄素T(ThT)荧光分子在自由状态下荧光强度很弱, 通过在Tris-HCl缓冲液中加入Pb²⁺的适配体即富含G的DNA序列, 可与ThT荧光分子形成G-四联体结构, 使荧光信号迅速增强; 向溶液中加入Pb²⁺, Pb²⁺与其适配体有很好的结合特异性, 可生成更牢固的G-四联体结构, 使ThT分子被释放出来, 导致溶液的荧光强度降低, 基于此可检测溶液中的Pb²⁺离子. 实验中优化了缓冲溶液组成、 ThT荧光分子浓度、 Pb²⁺适配体浓度及反应时间等条件. 结果表明, 在10 mmol/L Tris-HCl(pH=8.3, 含2 mmol/L MgCl₂)缓冲溶液中, ThT荧光分子和Pb²⁺适配体的浓度分别为10 μmol/L和200 nmol/L, 反应10 min时, 随着溶液中Pb ²⁺浓度的增加, 荧光强度减弱. Pb²⁺浓度在20~1000 nmol/L范围内时, 荧光强度与Pb²⁺的浓度呈现良好的线性关系(R²=0.9941), 检出限为1 nmol/L. 实际水样测试结果表明, 该方法的回收率在98.8%~101.3%之间. 该传感器灵敏、 快速、 无需化学修饰荧光分子且成本低.