超级电容器用中孔炭复合电极材料研究进展

超级电容器是一类利用电化学双电层或电极材料在电极/溶液界面发生的氧化还原反应来存储能量的装置,除兼有常规电容器功率密度大和二次电池能量密度高的特点外,还具有可逆性好和循环寿命长等优点.本文重点介绍了近几年国内外对中孔炭材料、表面官能团修饰中孔炭材料、中孔炭-金属氧化物、中孔炭-导电聚合物等几类电极材料的研究现状;并且展望了超级电容器用中孔炭及其复合电极材料的当前研究热点和发展前景.     

N-doped honeycomb-like porous carbon towards high-performance supercapacitor

Biomass-derived porous carbon with developed pore structure is critical to achieving high performance electrode materials. In this work, we report a grape-based honeycomb-like porous carbon (GHPC) prepared by KOH activation and carbonization, followed by N-doping (NGHPC). The obtained NGHPC exhibits a unique honeycomb-like structure with hierarchically interconnected micro/mesopores, and high specific surface area of 1268 m²/g. As a supercapacitor electrode, the NGPHC electrode exhibits a remarkable specific capacitance of 275 F/g at 0.5 A/g in a three-electrode cell. Moreover, the NGHPC//NGHPC symmetric supercapacitor displays a high energy density of 12.6 Wh/kg, and excellent cycling stability of approximately 95.2% capacitance retention after 5000 cycles at 5 A/g. The excellent electrochemical performance of NGHPC is ascribed to its high specific surface area, honeycomb-like structure and high-content of pyrodinic-N (36.29%). It is believed that grape-based carbon materials show great potential as advanced electrode materials for supercapacitors.     

Analysis of graphene-like activated carbon derived from rice straw for application in supercapacitor

Activated carbons with large surface area, abundant microporosity and low cost are the most commonly used electrode materials for energy storage devices. A very slack activated carbon with ultra-thin two-dimensional (2D) layer structure was prepared by our proposed approach in this work, which includes a pre-treatment process and potassium hydroxide activation at high temperatures.     

钠离子电池炭基负极材料研究进展

钠离子电池是目前新兴的低成本储能技术,因在大规模电化学储能中具有较好的应用前景而受到了国内外学者广泛的关注与研究。作为钠离子电池的关键电极材料之一,非石墨的炭质材料因具有储钠活性高、成本低廉、无毒无害等诸多优点,而被认为是钠离子电池实际应用时负极的最佳选择。本文详细综述了目前钠离子电池炭基负极材料的研究进展,重点介绍了炭质材料的储钠机理与特性,分析了炭材料结构与电化学性能之间的关系,探讨了其存在的问题,为钠离子电池炭基负极材料的发展提供有益的认识。     

花生壳制备微孔炭及其在电化学超级电容器中的应用

以未使用和使用氢氧化钠溶液处理的花生壳为碳源分别制备出微孔炭PSC-1和PSC-2.PSC-1和PSC-2的比表面积分别为552和726m2·g-1,其主要孔径都约为0.8nm.用PSC-1和PSC-2制备的电极和对称型超级电容器的循环伏安曲线均接近矩形,表明其具有良好的电容特性.在以微孔炭电极为工作电极、铂电极为对电极和银/氯化银电极为参比电极组成的三电极体系测量表明,在0.1A·g-1的电流密度下,PSC-1和PSC-2的比电容达到233和378F·g-1.经过1000次恒电流充放电循环后,在三电极体系和超级电容器中电极均表现出良好的稳定性和电容保持率.基于实验结果探讨了微孔炭的形成机理及其结构与电化学性质之间的联系.     

Biopolymers-Derived Materials for Supercapacitors: Recent Trends,Challenges, and Future Prospects

Supercapacitors may be able to store more energy while maintaining fast charging times; however, they need low-cost and sophisticated electrode materials. Developing innovative and effective carbon-based electrode materials from naturally occurring chemical components is thus critical for supercapacitor development. In this context, biopolymer-derived porous carbon electrode materials for energy storage applications have gained considerable momentum due to their wide accessibility, high porosity, cost-effectiveness, low weight, biodegradability, and environmental friendliness. Moreover, the carbon structures derived from biopolymeric materials possess unique compositional, morphological, and electrochemical properties. This review aims to emphasize (i) the comprehensive concepts of biopolymers and supercapacitors to approach smart carbon-based materials for supercapacitors, (ii) synthesis strategies for biopolymer derived nanostructured carbons, (iii) recent advancements in biopolymer derived nanostructured carbons for supercapacitors, and (iv) challenges and future prospects from the viewpoint of green chemistry-based energy storage. This study is likely to be useful to the scientific community interested in the design of low-cost, efficient, and green electrode materials for supercapacitors as well as various types of electrocatalysis for energy production.     

The electrochemistry of activated carbonaceous materials: past, present, and future

Carbonaceous materials are widely used in electrochemistry. All allotropic forms of carbons??graphite, glassy carbon, amorphous carbon, fullerenes, nanotubes, and doped diamond??are used as important electrode materials in all fields of modern electrochemistry. Examples include graphite and amorphous carbons as anode materials in high-energy density rechargeable Li batteries, porous carbon electrodes in sensors and fuel cells, nano-amorphous carbon as a conducting agent in many kinds of composite electrodes (e.g., cathodes based on intercalation inorganic host materials for batteries), glassy carbon and doped diamond as stable robust and high stability electrode materials for all aspects of basic electrochemical studies, and more. Amorphous carbons can be activated to form very high specific surface area (yet stable) electrode materials which can be used for electrostatic energy storage and conversion [electrical double-layer capacitors (EDLC)] and separation techniques based on electro-adsorption, such as water desalination by capacitive de-ionization (CDI). Apart from the many practical aspects of activated carbon electrodes, there are many highly interesting and important basic aspects related to their study, including transport phenomena, molecular sieving behavior, correlation between electrochemical behavior and surface chemistry, and more. In this article, we review several important aspects related to these electrode materials, in a time perspective (past, present, and future), with the emphasis on their importance to EDLC devices and CDI processes.     

电化学双电层电容器用新型炭材料及其应用前景

活性炭是目前使用最为广泛的一种电化学双电层电容器（EDLC）的电极材料,但其固有的缺点制约了EDLC性能的进一步提高。用新型高性能炭电极材料可使EDLC比能量和比功率性能进一步提高。这些新型炭材料包括基于石墨层状结构的纳米门炭,基于碳纳米管阵列结构的毛皮炭,通过高温置换反应制备的骨架炭以及电极可整体成型的纳米孔玻态炭。本文介绍了这些炭材料的电化学特性及其在电化学双电层电容器中的应用,指出用这4种新型炭材料制备EDLC的比能量或比功率性能远高于目前活性炭基EDLC,具有良好的应用前景。     

超级电容器用相互连接的类石墨烯纳米片

采用氧化镁模板耦合原位氢氧化钾活化法制备了超级电容器用煤焦油基相互连接的类石墨烯纳米片(IGNSs)。所制备的IGNS具有高达2887 m~2·g~(-1)的比表面积和大量的分级短孔。当作为超级电容器的电极材料时,在6 mol·L~(-1) KOH电解液中,于0.05 A·g~(-1)的电流密度下,IGNS显示出313 F·g~(-1)的高比容;在20 A·g~(-1)的电流密度下,IGNS的比电容为261F·g~(-1),显示了好的倍率性能;经过10000次循环测试后,其容量保持率为92.7%,展现了优异的循环稳定性。这一工作为从芳烃分子大规模生产高性能储能用类石墨烯纳米片提供了一种简单的方法。     

Simple fabrication of a phosphorus-doped hierarchical porous carbon via soft-template method for efficient CO2capture

Hierarchical porous carbons are widely used as adsorbents, catalyst supports, electrode materials, and other applications because of their high specific surface area (SSA), varied pore structure, adjustable porosity, and excellent physicochemical stability. Introducing heteroatoms such as N, P, or S, with electronegativities different from that of carbon, into the carbon skeleton can change the chemical properties of the surface and the density of the electron cloud around the carbon matrix, thus altering interactions of CO₂molecules with the surface and improving CO₂adsorption capacity. Therefore, doping heteroatoms in carbon materials has attracted a great amount of attention. In this paper, the template method was used with F108 (polyethylene glycol–polypropylene glycolpolyethylene glycol) as the template, resorcinol and formaldehyde solutions as the carbon sources, phosphoric acid as the phosphorus source, and KOH as the activator to prepare phosphorus-doped hierarchical porous carbons. Through a series of characterization and CO₂adsorption experiments, the influence of the amount of KOH and template agent on the pore structure of carbon materials was studied. We conclude that these phosphorus-doped hierarchical porous carbon materials are promising CO₂adsorbents.     

Self-Assembly Approach Towards MoS2-Embedded Hierarchical Porous Carbons for Enhanced Electrocatalytic Hydrogen Evolution

Transition metal-based nanoparticle-embedded carbon materials have received increasing attention for constructing next-generation electrochemical catalysts for energy storage and conversion. However, designing hybrid carbon materials with controllable hierarchical micro/mesoporous structures, excellent dispersion of metal nanoparticles, and multiple heteroatom-doping remains challenging. Here, a novel pyridinium-containing ionic hypercrosslinked micellar frameworks (IHMFs) prepared from the core–shell unimicelle of s-poly(tert-butyl acrylate)-b-poly(4-bromomethyl) styrene (s-PtBA-b-PBMS) and linear poly(4-vinylpyridine) were used as self-sacrificial templates for confined growth of molybdenum disulfide (MoS₂) inside cationic IHMFs through electrostatic interaction. After pyrolysis, MoS₂-anchored nitrogen-doped porous carbons possessing tunable hierarchical micro/mesoporous structures and favorable distributions of MoS₂ nanoparticles exhibited excellent electrocatalytic activity for hydrogen evolution reaction as well as small Tafel slope of 66.7 mV dec⁻¹, low onset potential, and excellent cycling stability under acidic condition. Crucially, hierarchical micro/mesoporous structure and high surface area could boost their catalytic hydrogen evolution performance. This approach provides a novel route for preparation of micro/mesoporous hybrid carbon materials with confined transition metal nanoparticles for electrochemical energy conversion.     

Biomass-derived activated carbon materials with plentiful heteroatoms for high-performance electrochemical capacitor electrodes

Activated carbons for electrochemical capacitor electrodes are prepared from soyabean using chemical activation with KOH. The pore size is easily controllable by changing the mass ratio between KOH and carbonized product. The as-prepared materials possess a large specific surface area, unique structure, well- developed hierarchical porosity and plentiful heteroatoms(mainly O and N). Thus resulted in its high specific capacitance,good rate capacity and cycling stability. Moreover, attributing to worldwide availability, renewable nature and low-cost, activated carbon prepared from soyabean has a good potential in energy conversion and storage devices.     

N‐Doped Carbon Aerogel Derived from a Metal–Organic Framework Foam as an Efficient Electrocatalyst for Oxygen Reduction

Metal–organic frameworks (MOFs) are promising alternative precursors for the fabrication of heteroatom‐doped carbon materials for energy storage and conversion. However, the direct pyrolysis of bulk MOFs usually gives microporous carbonaceous materials, which significantly hinder the mass transportation and the accessibility of active sites. Herein, N‐doped carbon aerogels with hierarchical micro‐, meso‐, and macropores were fabricated through one‐step pyrolysis of zeolitic imidazolate framework‐8/carboxymethylcellulose composite gel. Owing to the hierarchical porosity, high specific surface area, favorable conductivity, excellent thermal and chemical stability, the as‐prepared N‐doped carbon aerogel exhibits excellent oxygen reduction reaction (ORR) activity, long‐term durability, and good methanol tolerance in alkaline medium. This work thus provides a new way to fabricate new types of MOF‐derived carbon aerogels for various applications.     

Facile synthesis of high electrical conductive CoP via solid-state synthetic routes for supercapacitors

Co-P precursor was prepared by a mechanical alloying method and then is controlled to synthesis of Co P phase through an annealing method. The optimal conditions of ball milling and annealing temperature are investigated. The Co P exhibits higher electrical conductivity than graphite and cobalt oxide, showing excellent pseudocapacitive properties due its high electrical conductivity which can result in a fast electron transfer in high rate charge–discharge possess. The as-obtained Co P electrode achieves a high specific capacitance of 447.5 F/g at 1 A/g, and displays an excellent rate capability as well as good cycling stability. Besides, the asymmetric supercapacitor(ASC) based on the Co P as the positive electrode and activated carbon(AC) as the negative electrode was assembled and displayed a high rate capability(60%of the capacitance is retained when the current density increased from 1 A/g to 12 A/g), excellent cycling stability(96.7% of the initial capacitance is retained after 5000 cycles), and a superior specific energy of19 Wh/kg at a power density of 350.8 W/kg. The results suggest that the Co P electrode materials have a great potential for developing high-performance electrochemical energy storage devices.     

《碳纳米材料电化学》专辑序言 ——方兴未艾的电化学能量转换和存储先进材料和技术

可以预见,在相当一段时期内,能源和环境将是全球发展的两大主题. 其实,人类对能源的获取方式将对地球的生态环境和人类未来的生存状态和生活方式产生重要影响. 正因为如此,世界各国正在大力发展可再生能源和清洁能源. 电化学能源是将化学能高效转变为电能的一种能量转换方式,它历史悠久,但不断被改进和创新,尤其是近年来得到了较快的发展. 目前,电化学能源转换和存储器件主要包括一次电池（如锌锰电池等）、二次电池（如铅酸电池、镍氢电池、锂离子电池等）、燃料电池、金属-空气电池以及超级电容器等. 电化学能源和其它可再生能源相互补充、交叉利用将是未来清洁能源的主要发展方向.     

Electrodeposited NiSe_2 on carbon fiber cloth as a flexible electrode for high-performance supercapacitors

A flexible electrode of nickel diselenide/carbon fiber cloth(NiSe_2/CFC) is fabricated at room temperature by a simple and efficient electrodeposition method. Owing to NiSe_2 character of nanostructure and high conductivity, the as-synthesized electrodes possess perfect pseudocapacitive property with high specific capacitance and excellent rate capability. In three-electrode system, the electrode specific capacitance of the NiSe_2/CFC electrode varies from 1058 F g~(-1) to 996.3 F g~(-1) at 2 A g~(-1) to 10 A g~(-1) respectively, which shows great rate capability. Moreover, the NiSe_2 electrode is assembled with an active carbon(AC) electrode to form an asymmetric supercapacitor with an extended potential window of 1.6 V. The asymmetric supercapacitor possesses an excellent energy density 32.7 Wh kg~(-1) with a power density 800 W kg~(-1) at the current density of 1 A g~(-1). The nanosheet array on carbon fiber cloth with high flexibility, specific capacitance and rate capacitance render the NiSe_2 to be regarded as the promising material for the high performance superconductor.     

Recent Advances on Nitrogen-Doped Porous Carbons Towards Electrochemical Supercapacitor Applications

Due to ever-increasing global energy demands and dwindling resources, there is a growing need to develop materials that can fulfil the World's pressing energy requirements. Electrochemical energy storage devices have gained significant interest due to their exceptional storage properties, where the electrode material is a crucial determinant of device performance. Hence, it is essential to develop 3-D hierarchical materials at low cost with precisely controlled porosity and composition to achieve high energy storage capabilities. After presenting the brief updates on porous carbons (PCs), then this review will focus on the nitrogen (N) doped porous carbon materials (NPC) for electrochemical supercapacitors as the NPCs play a vital role in supercapacitor applications in the field of energy storage. Therefore, this review highlights recent advances in NPCs, including developments in the synthesis of NPCs that have created new methods for controlling their morphology, composition, and pore structure, which can significantly enhance their electrochemical performance. The investigated N-doped materials a wide range of specific surface areas, ranging from 181.5 to 3709 m² g⁻¹, signifies a substantial increase in the available electrochemically active surface area, which is crucial for efficient energy storage. Moreover, these materials display notable specific capacitance values, ranging from 58.7 to 754.4 F g⁻¹, highlighting their remarkable capability to effectively store electrical energy. The outstanding electrochemical performance of these materials is attributed to the synergy between heteroatoms, particularly N, and the carbon framework in N-doped porous carbons. This synergy brings about several beneficial effects including, enhanced pseudo-capacitance, improved electrical conductivity, and increased electrochemically active surface area. As a result, these materials emerge as promising candidates for high-performance supercapacitor electrodes. The challenges and outlook in NPCs for supercapacitor applications are also presented. Overall, this review will provide valuable insights for researchers in electrochemical energy storage and offers a basis for fabricating highly effective and feasible supercapacitor electrodes.     

Enriching redox active sites by interconnected nanowalls-like nickel cobalt phospho-sulfide nanosheets for high performance supercapacitors

Although transition metal phospho-sulfides deliver outstanding electrochemical performance, complex preparation methods hindered their further development. Herein, we report a facile one-step electrodeposition approach to deposit interconnected nanowalls-like nickel cobalt phospho-sulfide (Ni-Co-P-S) nanosheets onto the surface of carbon cloth. The thin Ni-Co-P-S nanosheets with multi-components and synergetic effects delivered rich active sites, further enhancing reversible capacitance. Therefore, the as-prepared Ni-Co-P-S electrode materials exhibit excellent electrochemical performance in a three-electrode system, showcasing a high specific capacitance of 2744 F/g at 4 A/g. The full supercapacitors based on Ni-Co-P-S as positive electrode and active carbon as negative electrode showcase a high specific capacitance of 110.9 F/g at 1 A/g, impressive energy density of 39.4 Wh/kg at a power density of 797.5 W/kg in terms of excellent cycling stability (91.87% retention after 10,000 cycles). This simple electrode position strategy for synthesizing Ni-Co-P-S can be extended to prepare electrode materials for various sustainable electrochemical energy storage/conversion technologies.     

Hierarchically Porous Carbons Derived from Metal–Organic Framework/Chitosan Composites for High‐Performance Supercapacitors

Hierarchically porous carbon materials with high surface areas are promising candidates for energy storage and conversion. Herein, the facile synthesis of hierarchically porous carbons through the calcination of metal–organic framework (MOF)/chitosan composites is reported. The effects of the chitosan (CS) additive on the pore structure of the resultant carbons are discussed. The corresponding MOF/chitosan precursors could be readily converted into hierarchically porous carbons (NPC‐V, V=1, 2, 4, and 6) with much higher ratios of meso‐/macropore volume to micropore volume (V_meso‐macro/V_micro). The derived carbon NPC‐2 with the high ratio of V_meso‐macro/V_micro=1.47 demonstrates a high specific surface area of 2375 m² g^?1, and a high pore volume of 2.49 cm³ g^?1, as well as a high graphitization degree, in comparison to its counterpart (NPC) without chitosan addition. These excellent features are favorable for rapid ion diffusion/transport, endowing NPC‐2 with enhanced electrochemical behavior as supercapacitor electrodes in a symmetric electrode system, corresponding to a high specific capacitance of 199.9 F g^?1 in the aqueous electrolyte and good rate capability. Good cycling stability is also observed after 10 000 cycles.     

Unusual Ultra‐Hydrophilic,Porous Carbon Cuboids for Atmospheric‐Water Capture

There is significant interest in high‐performance materials that can directly and efficiently capture water vapor, particularly from air. Herein, we report a class of novel porous carbon cuboids with unusual ultra‐hydrophilic properties, over which the synergistic effects between surface heterogeneity and micropore architecture is maximized, leading to the best atmospheric water‐capture performance among porous carbons to date, with a water capacity of up to 9.82 mmol g^?1 at P/P₀=0.2 and 25 °C (20 % relative humidity or 6000 ppm). Benefiting from properties, such as defined morphology, narrow pore size distribution, and high heterogeneity, this series of functional carbons may serve as model materials for fundamental research on carbon chemistry and the advance of new types of materials for water‐vapor capture as well as other applications requiring combined highly hydrophilic surface chemistry, developed hierarchical porosity, and excellent stability.