激光切割脆性材料的温度场模拟

激光切割脆性材料是一个复杂的光致热过程。在综合考虑材料的热物性参数、初始条件及边界条件的情况下,运用Ansys软件建立了激光切割脆性材料温度场的三维有限元模型。采用APDL语言实现了对热流密度的高斯分布和强制对流换热及移动激光热源的模拟。通过设置不同的激光切割参数,对温度场的变化进行了模拟分析。所建立的温度场模拟系统可以对实际激光切割脆性材料的热过程进行前期预测,并能对激光切割参数的选择进行一定的优化,以减少实际切割的盲目性。     

侧面抽运板状激光介质的热汇冷却

高热负荷固体激光介质的热效应已经成为制约激光器功率进一步提高的严重障碍,只有对激光介质进行有效的冷却才能保证其安全运行。以不均匀换热系数模型为基础,研究了具有非均匀内热源的侧面双向抽运板状激光介质在狭窄通道强制对流冷却情况下的耦合换热问题,对热汇冷却方案下介质的温度分布和热应力分布进行了数值模拟和分析,并对复合介质、蓝宝石和金刚石三种热汇材料进行对比。结果表明,忽视换热系数的非均匀性将导致应力计算结果偏低。对于侧面抽运、侧面冷却的激光介质,金刚石热汇冷却方案最佳,蓝宝石热汇方案次之,而复合介质方案不宜采用。     

Microwave heating of liquid at the forced flow around a flat plate under the conditions of non-stationary radiation-convection heat transfer

A class of nonlinear problems of non-stationary radiation-convective heat transfer under the conditions of microwave action with a small depth of penetration is considered in a forced laminar flow of liquid around a flat plane. The solutions to these problems are obtained using the effective asymptotic procedures at the successive stages of nonstationary and stationary radiation-convective heat transfer on the heat-radiating horizontal plane. The non-stationary and stationary stages of solution are matched using the “longitudinal coordinate-time” characteristic. The solutions constructed on such principles correlate reliably with the exact ones at the limiting values of such parameters as a small and large intensity of external thermal impact, small and large times, etc. The error of solutions does not exceed 1–7 %. As the plate is removed from the leading edge of the plate due to heat radiation, convective heat transfer degenerates from values characteristic of the boundary condition of the second kind to the values characteristic of the boundary condition of the first kind. A strong effect on the nature of variations of the surface temperature and Nusselt number of the complex parameter of microwave and thermal radiation is noted. An important advantage of the developed method for solving this class of external problems is that even before complex calculations it is possible to perform an exhaustive analysis of the fundamental laws of the processes under study. Despite a number of initial simplifications, the latter do not significantly affect the accuracy of results, guaranteeing reliable quantitative information. The developed method can also be extended to the regimes of forced convection with linear dependence of physical properties on temperature using transformation of A.A. Dorodnitsyn. To confirm adequacy of the constructed mathematical model, stationary radiation-convective heat transfer under the forced flow around a flat plate was studied experimentally. The results of comparison of the theoretical and experimental data show that they are in a good agreement. This again confirms the effectiveness of the developed method for constructing theoretical solutions to the nonlinear problems of forced convection using the asymptotic procedures.     

Natural and forced convective heat transfer on slender cylinders

This paper presents an experimental study of free and forced convective heat transfer along vertical slender cylinders. The local heat transfer coefficient is determined from the measurement of the surface temperature distribution performed by quantitative infrared thermography. It is found that the convective heat transfer is strongly dependent on the cylinder curvature and misalignment with the flow. The effect of proximity of two cylinders is emphasized in the case of forced convection. Correlations are proposed for the two types of convection. It is worth noting that circumstances exist where the turbulent heat transfer in free convection can be of the same order of magnitude as for laminar forced convection. The outcome of the study demonstrates the suitability of quantitative infrared thermography to solve complex problems and to provide a deeper understanding of the heat transfer on slender cylinders.     

PSM高压电源干式变压器的热分析计算

多绕组干式整流变压器作为托卡马克装置加热系统中高压电源的一个重要设备,其性能优良与否直接关系到高压电源的输出品质。开展变压器的功率损耗与散热分析研究,减少变压器因温度上升造成的性能影响,对保证变压器的良好工作状态是十分重要的。通过MATLAB对干空气下的比热容、传热系数等热物理性质与温度的关系进行拟合分析,得到相关的关系方程,对变压器的对流传热与热辐射进行分析计算,得到仅在空气自然对流和热辐射的情况下,不能使变压器的温度控制在满足性能的温度范围之内。在强迫空气对流的情况下,实现了变压器良好的散热。进一步利用ANSYS对变压器的温度场分布进行分析,利用温度场的分布趋势图观察强迫风冷相对于自然冷却的优点,强迫风冷降低了整体的温度,使热量更快地散发到周围大气中,减少了变压器受高温的危害。     

伴随水力空化现象的对流换热数值研究

以水为介质,建立了液体流动的混合物多相流模型及空化模型,运用CFD方法对水平圆管内伴随有水力空化现象的受迫对流换热过程进行了数值研究,详细分析了管道入口压力、入口温度和限流孔与管道直径比等因素对水力空化及对流换热过程的影响规律。数值模拟结果表明,空化现象出现在圆管喉部(限流孔)壁面附近区域;与相同流量下无空化时的传热相比,在发生空化现象的区域,传热壁面被蒸汽所覆盖导致传热急剧恶化,而在远离空化发生区域的下游位置,由于空化的扰流作用使得加热壁面与流体之间的传热得到明显改善。     

基于三点法的柱状生物组织热特性参数估计

针对柱状生物活体组织,提出了通过测量组织表面三个测量点的温度变化,同时确定多个热特性参数的新的非稳态无损测量方法。基于Pennes生物传热方程,建立了描述三点法测量系统传热过程的数学模型,进行了正问题的求解。根据数值计算以及参数灵敏度分析的结果,采用改进的高斯方法,对生物活体组织的热特性参数估计进行了模拟计算及分析。结果表明,采用三点测温同时确定活体生物组织的导热系数、血液灌注率、综合换热系数的测量方法是有效和可行的。     

高温相变储能换热器中传热模型的研究

1前言利用相变材料在发生相变时有很高的潜热释放或吸收的特点，将相变材料作为储热介质用于相变储能换热器中，可以大大地提高热储存的容量。本文研究的这种壳管式相变储能换热器壳内布置换热管，管壳之间填充高温储热材料，管内通以空气作为热交换流体提取储存在相变材料中的热量。定义输出功率为单位时间内热交换流体所提取到的热量，那么输出功率就成为评价这类换热器换热性能的指标。2理论模型的建立下面几点，概括了求解本文相变储能装置中传热问题的特点：a．相变储能换热器的壳侧填充的AI-Si合金属高温相变储能材料，实验始末其温…     

空气在多孔介质中对流换热的数值模拟

本文对空气在多孔结构中的对流换热进行了数值研究．数值模拟与实验的比较表明,对空气在玻璃或轴承钢颗粒多孔结构中的对流换热进行数值模拟时,应采用考虑热弥散效应的局部非热平衡模型．本文还研究了颗粒直径、颗粒导热系数、空气物性随压力的变化及粘性耗散等对换热的影响．     

Confinement thermique d'une enceinte par jet d'air en convection forcée

A global model is proposed for the heat transfer through a plane air jet which is used as a thermal seal of a case at temperatures higher than the ambient one. The model considers that forced convection predominates over the natural convection and uses an analogy between heat and mass transfers. The heat balance calculation is based on an estimation of the velocity and temperature profiles at returning slot of the jet. Hydrodynamically, the jet is assimilated to a free jet. Thermally, a new formulation for the temperature profile in the jet is proposed for the most general case whatever the temperatures at the blowing slot and on each side of the jet — room and case —. The predictions by the model are in good agreement with experimental results from the point of view of:

• •- the changes in longitudinal and transversal temperature in the jet;
• •- the flux exchanged between all compartments;
• •- the energy consumption required to assure a given difference between the case temperature and the ambient one.

     

Measurement of heat transfer coefficients by nuclear magnetic resonance

We demonstrate an experimental method for the measurement of heat transfer coefficient for a fluid system by magnetic resonance imaging. In this method, the temporal variation of thermally induced nuclear shielding is monitored and the average heat transfer coefficient is measured as a function of fluid velocity. We examine the cases of natural convection and forced convection at fluid velocity up to 0.8 m s(-1). These cases correspond to low dimensionless Biot (Bi) number where the heat transfer is limited by thermal convection. We demonstrate the NMR method for two simple geometries, a cylinder and a sphere, to experimentally determine the heat transfer coefficient (h) in two NMR imaging and spectroscopy systems through measuring three NMR parameters, the chemical shift, magnetization and spin self diffusion coefficient.     

Annular convective-radiative fins with a step change in thickness,and temperature-dependent thermal conductivity and heat transfer coefficient

This article investigates the thermal performance of convective-radiative annular fins with a step reduction in local cross section (SRC). The thermal conductivity of the fin’s material is assumed to be a linear function of temperature, and heat transfer coefficient is assumed to be a power-law function of surface temperature. Moreover, nonzero convection and radiation sink temperatures are included in the mathematical model of the energy equation. The well-known differential transformation method (DTM) is used to derive the analytical solution. An exact analytical solution for a special case is derived to prove the validity of the obtained results from the DTM. The model provided here is a more realistic representation of SRC annular fins in actual engineering practices. Effects of many parameters such as conduction-convection parameters, conduction-radiation parameter and sink temperature, and also some parameters which deal with step fins such as thickness parameter and dimensionless parameter describing the position of junction in the fin on the temperature distribution of both thin and thick sections of the fin are investigated. It is believed that the obtained results will facilitate the design and performance evaluation of SRC annular fins.     

凝华结霜霜层导热系数理论分析

研究水蒸汽凝华结霜过程在冷壁上形成的霜层的导热系数,依据随机管子多孔介质霜层模型,假设霜层是由孔隙空间与冰晶骨架构成的多孔介质,其中孔隙空间由随机毛细管及连接管子的接头形成,湿空气中的水蒸汽在霜层的孔隙空间中扩散输运并凝华结霜,根据传热传质学理论,导出霜层导热系数关系式。     

高温吸热管内超临界CO2传热特性的数值模拟

研究超临界CO2在高温吸热管内的传热特性是将其应用于聚光太阳能热发电技术中的基础.本文对此进行了数值模拟研究,分析了流体温度、流动方向、系统压力、质量流率和热流密度对对流传热系数和Nu数的影响.结果表明:高温区(800—1050 K)的对流传热系数和Nu数受流动方向和系统压力的影响均很小,但都随着质量流率的增大以及热流密度的减小而明显增大;而随着流体温度的升高,对流传热系数近似线性增大,Nu数则近似线性减小.另外,本文研究发现在高温区可忽略浮升力对传热的影响,而由高热流密度引起的流动加速效应会明显恶化传热.最后,选取了八种管内超临界流体传热关联式与模拟结果进行对比,发现使用基于热物性修正的关联式对高温区传热数据预测的结果优于使用基于无量纲数修正的关联式得到的结果,且其中预测效果最优的关联式得到的计算结果与模拟结果之间的平均绝对相对偏差为8.1%.     

An Experimental and Theoretical Investigation into the Thermal Performance Characteristics of a Staggered Vertical Pin Fin Array Heat Sink with Assisting Mixed Convection in External and In-Duct Flow Configurations

A theoretical and experimental study was carried out on the thermal performance of a pin fin array heat sink. A theoretical model was utilized based on the success of prior research that has the capability of predicting the influence of various geometrical, thermal, and flow parameters on the effective thermal resistance of the heat sink. An experimental investigation was carried out for measuring the thermal performance of the heat sink, and the overall convective heat transfer coefficient for the fin bundle, including the thermal and flow bundle effect. Utilizing the new empirical correlations, theoretical predictions were made and experimentally validated for a wide range of parameters for combined forced and natural convection in the assisting flow configuration. Both the theoretical model and experimental data indicated the existence of optimal fin spacing.     

粘性耗散及变物性对多孔介质中对流换热的影响研究

本文通过理论分析、数值模拟与实验研究的综合,研究了粘性耗散及变物性对多孔介质中对流换热的影响。发现：用理想的等热流边界条件可以较好地数值模拟等热流边界条件下多孔介质中的对流换热;在实际可实现的参数条件下,粘性耗散对多孔介质中对流换热的影响不大;油的变物性对换热的影响很大—热流密度越高,对流换热越强。     

Caractérisation expérimentale et numérique des transferts de chaleur à travers un jet d'air plan horizontal

This study reports on heat transfer through a plan horizontal air jet. The jet maintained at a higher temperature than the ambience allows a thermal sealing at the upper side of the opening case.The thermal and hydrodynamic measurements taken on the experimental device and the numerical simulations carried out by using the Phoenics package distinguish two types of flow. For the small velocities of the jet or the high differences of temperature, the natural convection predominates: the hot jet diffuses upwards and can not seal the case. Inversely, for the high values of the jet velocities, the forced convection predominates: the case is correctly sealed but the power consumption increases like the flowrate. A dimensionless number called deflection modulus allows to characterize the transition from one flow pattern to another and it also allows to minimize the energy consumption.     

Inclined magnetic field and nanoparticle aggregation effects on thermal Marangoni convection in nanoliquid: A sensitivity analysis

The heat transfer rate of thermal Marangoni convection in ethylene glycol-based titanium nanoliquid is analyzed by using the Response Surface Methodology (RSM). Two different heat sources (i.e. the temperature-related heat source (THS) and the space-related exponential heat source (ESHS)) are included in the thermal analysis. Aggregation of nanoparticles and inclined magnetism are also considered. The modified Krieger-Dougherty model and the modified Maxwell-Bruggeman model are used to analyze the aggregation aspect of the nanoparticles. The resulting nonlinear system is treated numerically by using the finite difference method. The sensitivity of the heat transfer rate to the thermal radiation parameter, the ESHS parameter, and the THS parameter is examined by using the RSM model. The individual impact of the actual parameters on various flow fields is compared and visualized by graphs. The heat transfer rate is positively sensitive to thermal radiation and negatively sensitive to the parameters of the heat source. Besides, the ESHS aspect has a greater impact on the heat transfer rate than the THS aspect. The velocity flow field is decelerated significantly ($5.31\%$near the interface) by the magnetic field inclination angle.     

激光诱导间质热疗中生物组织的温度场研究

激光诱导间质热疗疗效评估的前提是必须获得准确的激光在不同功率、不同照射时间的生物组织温度场分布.利用多物理场直接耦合分析软件COMSOL Multiphysics构建了在组织光学参量不变情况下的三维有限元传热模型.该模型基于Pennes生物传热方程和轴对称高斯形状的激光光束热源方程,参量针对离体猪肝组织,考虑到了生物组织热物性密度、比热和热导率随温度变化的情况.仿真获得激光功率为0.77 W、0.95 W、1.23 W,照射时间为10~90 s,径向距离0~2 mm范围和轴向距离0~4 mm范围的温度场数据集.利用拟合算法,获得了自变量为激光功率、照射时间、径向距离和轴向距离的生物组织温度场分布模型.将功率为0.88 W和1.05 W时的结果与Pennes方程结果相比较,两者误差在5%以内.     

Numerical simulation of heat transfer and fluid flow of Water-CuO Nanofluid in a sinusoidal channel with a porous medium

This study has compared the convection heat transfer of Water-based fluid flow with that of Water-Copper oxide (CuO) nanofluid in a sinusoidal channel with a porous medium. The heat flux in the lower and upper walls has been assumed constant, and the flow has been assumed to be two-dimensional, steady, laminar, and incompressible. The governing equations include equations of continuity, momentum, and energy. The assumption of thermal equilibrium has been considered between the porous medium and the fluid. The effects of the parameters, Reynolds number and Darcy number on the thermal performance of the channel, have been investigated. The results of this study show that the presence of a porous medium in a channel, as well as adding nanoparticles to the base fluid, increases the Nusselt number and the convection heat transfer coefficient. Also the results show that As the Reynolds number increases, the temperature gradient increases. In addition, changes in this parameter are greater in the throat of the flow than in convex regions due to changes in the channel geometry. In addition, porous regions reduce the temperature difference, which in turn increases the convective heat transfer coefficient.