Preparation and characterization of sodium carboxymethylcellulose/poly(N-isopropylacrylamide)/clay semi-IPN nanocomposite hydrogels

A new kind of pH-/temperature-responsive semi-interpenetrating polymer network hydrogels based on linear sodium carboxymethylcellulose (CMC) and poly(N-isopropylacrylamide) (PNIPA) cross-linked by inorganic clay (CMC/PNIPA/Clay hydrogel) was prepared. The temperature- and pH-responsive behaviors, the mechanical properties of these hydrogels were investigated. The CMC/PNIPA/Clay hydrogels exhibited a volume phase transition temperature around 32 °C with no significant deviation from the conventional PNIPA hydrogels. The swelling ratio of the CMC/PNIPA/Clay hydrogels gradually decreased with increasing the contents of clay. The influence of pH value on swelling behaviors showed that there is a maximum swelling ratio at pH 5.9. Moreover, the CMC/PNIPA/Clay hydrogels exhibited excellent mechanical properties with high tensile stress and elongation at break in excess of 1200%.     

A new polymer/clay nano-composite hydrogel with improved response rate and tensile mechanical properties

A new type of stimuli-responsive organic/inorganic nano-composite hydrogel was prepared by introducing fibrillar attapulgite into poly(2-hydroxyethyl methacrylate-co-poly(ethylene glycol) methyl ether methacrylate-co-methacrylic acid) network, in which the nanosized attapulgite fibril worked as the cross-linker instead of conventional chemical cross-linker. In the preparation process, a prepolymerization route was adopted to effectively stabilize the dispersion of attapulgite. The structure and morphology of the nano-composite hydrogels were characterized by SEM, FTIR and DSC. The swelling/deswelling behaviors and tensile mechanical properties of the nano-composite hydrogels were compared with that of the corresponding chemically cross-linked hydrogel. The results showed that the nano-composite hydrogels had much greater equilibrium-swelling ratio, much faster response rate to pH and significantly improved tensile mechanical properties. As the content of AT increased, the tensile strength, effective cross-link chain density and glass transition temperature increased, while the equilibrium swelling ratio, deswelling rate and elongation at break decreased.     

高机械性能的聚(丙烯酸-co-甲基丙烯酸十八酯)疏水缔合凝胶的溶胀行为研究

以丙烯酸(AA)、甲基丙烯酸十八酯(OMA)、十二烷基硫酸钠(SDS)为原料,采用胶束共聚的方法合成了疏水缔合(HA)凝胶.在HA凝胶内部,表面活性剂SDS与疏水单体OMA组成的增溶胶束起到物理交联作用,将亲水的聚合物链交联起来.通过单向拉伸试验证实了该凝胶具有较高的机械性能.此外,也测试了HA凝胶在不同pH值溶液中的溶胀行为.结果显示,HA凝胶具有特殊的溶胀行为,其溶胀过程可以分为凝胶溶蚀、溶胀平衡和凝胶瓦解3个阶段.在强酸性条件下,凝胶的溶胀被抑制,没有出现凝胶瓦解阶段.在强碱性条件下,凝胶的溶胀被促进,溶胀平衡阶段被越过.盐的存在也会抑制HA凝胶的溶胀,但在SDS溶液中,溶液中的SDS会促使凝胶中的疏水改性聚合物溶解到溶液中去,组成新的缔合结构,而使溶液增稠。     

基于Pickering乳液的磁性高强水凝胶的制备及性能表征

合成了一种磁性Fe3O4纳米颗粒稳定的水包油(O/W)Pickering乳液并以其作为交联剂,在适宜条件下引发单体丙烯酰胺聚合来制备了一种新型的磁性高强复合水凝胶.采用X射线衍射(XRD)及场发射扫描电子显微镜(SEM)分别对磁性Fe3O4纳米颗粒和复合水凝胶的结构进行了表征,结果表明Pickering乳胶粒子较均匀地分布在复合凝胶网络中.溶胀性能测试及溶胀动力学分析表明复合水凝胶具有良好的溶胀性能,能够吸收自身干重100倍左右的水,其溶胀过程不遵循Fickian扩散模型;拉伸测试表明该水凝胶具有优异的力学性能,其拉伸强度能够达到150 kPa左右,断裂伸长率能够达到300%左右,并且当其承受的应力释放后能快速地恢复到初始形态.磁性能测试的结果显示该水凝胶具有良好的磁性.     

Tough superabsorbent poly(acrylic acid) nanocomposite physical hydrogels fabricated by a dually cross-linked single network strategy

In this work, we report a facile method for the preparation of tough and highly stretchable physical hydrogels by dual cross-linking composed of vinyl-hybrid silica nanoparticles(VSNPs) as multivalent covalent cross-linking and hydrogen bonding as physical cross-linking. Poly(acrylic acid) nanocomposite physical hydrogels(NCP gels) are obtained without adding any organic chemical cross-linkers. When the content of VSNPs is 0.7 wt%(relative to the monomer), the NCP gels exhibit good mechanical properties(fracture strength = 370 k Pa, elongation at break = 2200%) and a high swelling capacity in both deionized water(2300 g/g) and saline(220 g/g). Meanwhile, the NCP gels have good recovery ability.     

PVA改性PAMPS-PAM超高力学性能双网络水凝胶的制备

采用紫外光引发聚合制备了聚乙烯醇(PVA)改性的聚(2-丙烯酰胺基-2-甲基丙磺酸)-聚丙烯酰胺(PAMPS-PAM)双网络(DN)水凝胶.测定并比较了PVA改性前后PAMPS-PAM双网络水凝胶的溶胀动力学;通过扫描电子显微镜(SEM)观察了单网络水凝胶的结构;测定PVA改性前后PAMPS-PAM双网络水凝胶的压缩及拉伸性能.结果表明,经PVA改性后的PAMPS-PAM双网络水凝胶有较高的溶胀比;0.82%PVA用量的PAMPS-PAM双网络水凝胶在90%压缩形变率下仍保持完整、最大拉伸应力达到0.5 MPa,大幅提高PAMPS-PAM双网络水凝胶的力学性能.     

Preparation and characterization of novel silk fibroin/2-(N,N-dimethylamino)ethyl methacrylate based composite hydrogels with enhanced mechanical properties for controlled release of cefixime

Hydrogels with improved mechanical properties have been particularly attractive for their applications in the biomedical area including wound healing. For this purpose, a series of novel composite hydrogels based on silk fibroin (SF) and 2-(N,N-dimethylamino) ethyl methacrylate (DMAEMA) were fabricated. The swelling and mechanical tests indicated that an optimum design of hydrogel was essential to provide a high degree of water uptake, higher tensile strength and elongation at break values. Here, the S40D60 was exhibited superior swelling and strong mechanical characteristics than all the other hydrogels with different compositions. Furthermore, it was observed that the cefixime was released from the formulation of S40D60 in a sustainable manner and the drug release rate can be controlled by pH of the dissolution medium. According to these findings, it is suggested that the optimal formulation of S40D60 would be effectively performed in situ drug therapy for wound healing.     

聚乙二醇对PAMPS/PAM双网络水凝胶性能的影响

采用紫外光引发聚合制备了聚乙二醇(PEG)改性的聚(2-丙烯酰胺-2-甲基丙磺酸)/聚丙烯酰胺(PAMPS/PAM)双网络水凝胶.测定并比较了PEG改性前后双网络水凝胶的溶胀动力学以及单网络水凝胶中丙烯酰胺(AM)的吸收量;用扫描电子显微镜(SEM)观察了单网络水凝胶的结构;测定PEG改性前后双网络水凝胶的压缩及拉伸性能.结果表明,经PEG改性后的双网络水凝胶有较高的溶胀比;改性后单网络水凝胶更易吸收AM;改性后双网络水凝胶压缩形变率达到90%以上、拉伸形变率是未改性双网络水凝胶的2倍.     

Frontal photopolymerization synthesis of multilayer hydrogels with high mechanical strength

Multilayer hydrogels were prepared by frontal photopolymerization of acrylamide and 2-acrylamido-2-methylpropane sulfonic acid using hydrophilic reactive microgels (HRM) as crosslinkers instead of conventional crosslinkers. The hydrophilic microgels (HM) were prepared by inverse emulsion photopolymerization and then were chemical modified by N-methylolacrylamide (NMA) to obtain HRM with CC double bonds. The HM and HRM was characterized by dynamic light scattering measurements, SEM, TEM and FTIR, respectively. It was found that the resulting multilayer hydrogels showed high fracture strength and high tensile elongation along parallel direction. However their fracture strength and tensile elongation along perpendicular direction was very weak. The swollen multilayer hydrogels were about 1.0–2.0 mm in thickness, the maximal equilibrium swelling degree was only 30.45. The multilayer hydrogels were characterized by DSC, TEM and XRD, respectively. The swelling property and mechanical strength of some typical multilayer hydrogels were studied.     

Semi‐interpenetrating polymer networks composed of poly(N‐isopropyl acrylamide) and polyacrylamide hydrogels

Three series of semi‐interpenetrating polymer networks, based on crosslinked poly(N‐isopropyl acrylamide) (PNIPA) and 1 wt % nonionic or ionic (cationic and anionic) linear polyacrylamide (PAAm), were synthesized to improve the mechanical properties of PNIPA gels. The effect of the incorporation of linear polymers into responsive networks on the temperature‐induced transition, swelling behavior, and mechanical properties was studied. Polymer networks with four different crosslinking densities were prepared with various molar ratios (25:1 to 100:1) of the monomer (N‐isopropyl acrylamide) to the crosslinker (methylenebisacrylamide). The hydrogels were characterized by the determination of the equilibrium degree of swelling at 25 °C, the compression modulus, and the effective crosslinking density, as well as the ultimate hydrogel properties, such as the tensile strength and elongation at break. The introduction of cationic and anionic linear hydrophilic PAAm into PNIPA networks increased the rate of swelling, whereas the presence of nonionic PAAm diminished it. Transition temperatures were significantly affected by both the crosslinking density and the presence of linear PAAm in the hydrogel networks. Although anionic PAAm had the greatest influence on increasing the transition temperature, the presence of nonionic PAAm caused the highest dimensional change. Semi‐interpenetrating polymer networks reinforced with cationic and nonionic PAAm exhibited higher tensile strengths and elongations at break than PNIPA hydrogels, whereas the presence of anionic PAAm caused a reduction in the mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3987–3999, 2004     

Robust solvent‐free fabrication and characterization of (polydimethylsiloxane‐co‐2‐hydroxyethylmethacrylate)/poly (ethylene glycol) methacrylate (PDMS‐HEMA)/PEGMA hydrogels

Combining hydrophobic materials such as polydimethylsiloxane (PDMS), a natural hydrophobic material with typical hydrophilic monomers without using organic solvent remains a big challenge due to their extreme different properties; hence, fabricating a class of silicone hydrogels with two extremes without use of organic solvents could bring us a novel class of silicone hydrogels. Herein, a range of PDMS‐HEMA‐PEGMA hydrogels was prepared from hydroxyl‐terminated PDMS, 2‐hydroxyethylmethacrylate (HEMA), poly (ethylene glycol) methacrylate (PEGMA), and isophorone diisocyanate via condensation and radical copolymerization reactions. The infrared results confirmed the PDMS‐HEMA‐PEGMA network formation, while the hydrophilicity of the as‐prepared block copolymer was dependent on (PDMS‐HEMA)/PEGMA ratio. Increasing the PEGMA content resulted in increased equilibrium water content, phase separation, surface roughness, and tensile strength, while the tensile modulus, elongation at break, optical transmittance, water contact angle, and oxygen permeability (Dk) were decreasing. At PEGMA content of 28.3%, the relative protein adsorption ratio decreased to 20% and 36% for bovine serum albumin and lysozyme, respectively, compared with that of the control (PDMS‐HEMA), suggesting antiprotein adsorption ability. In overall, the results showed that the PDMS‐HEMA‐PEGMA hydrogels not only exhibited remarkable hydrophilicity and suppressed protein adsorption but also maintained higher optical transparency and oxygen permeability (Dk).     

羧甲基纤维素钠/聚(N-异丙基丙烯酰胺)纳米复合水凝胶的制备及结构性能表征

以无机粘土为交联剂制备了具有温度、pH双重敏感特性的羧甲基纤维素钠/聚(N-异丙基丙烯酰胺)/粘土半互穿网络纳米复合水凝胶(CMC/PNIPA/Clay semi-IPN),并通过红外和透射电镜对其结构和形态进行了表征。在酸性(pH=1.2)和20℃条件下,分别研究了温度和不同pH缓冲液对该凝胶溶胀度的影响,测定了复合水凝胶的力学性能。结果表明:水凝胶中的粘土被剥离成单片层,且均匀分散在凝胶网络中,起交联剂的作用,而CMC以线性大分子的形态存在;CMC/PNIPA/Clay具有良好的温度、pH双重敏感特性;凝胶的断裂伸长率>1 000%。     

Ultrastretchable,Tough, and Notch‐Insensitive Hydrogels Formed with Spherical Polymer Brush Crosslinker

Spherical polymer brushes, poly(acrylic acid) (PAA)‐grafted polystyrene nanoparticle (PAA@PS), are employed as the macro‐crosslinker to prepare PAA hydrogels. Benefitting from the innumerable hydrogen bonds between highly entangled PAA chains both in bulk and on the polymer brush, the PAA/PAA@PS hydrogels combine desirable stretchability, toughness, and notch‐insensitivity. The uniaxial tensile tests show a very high fracture elongation up to 9.1 × 10³% while the fracture toughness reaches 3.0 MJ m⁻³ and the maximum swelling ratio of the hydrogel can be 2.0 × 10³ as well. After being loaded with silver nanoparticles, the PAA/PAA@PS hydrogels are employed as a recyclable catalyst successfully.     

Mechanical properties of gradient copolymers of styrene and n‐butyl acrylate

The mechanical properties of linear and V‐shaped compositional gradient copolymer of styrene and n‐butyl acrylate with composition of around 55 wt % styrene were investigated by comparing with their block copolymer counterparts. Compared with their block copolymer counterparts, the gradient copolymers showed lower elastic modulus, much larger elongation at break, and similar ultimate tensile strength at room temperature. This performance could be ascribed to that the local moduli continuously change from the hardest nanodomains to the softest nanodomains in the gradient copolymer, which alleviates the stress concentration during tensile test. Compared with the V‐shaped gradient (VG) copolymer, the linear gradient copolymer showed much higher elastic modulus but lower elongation at break. The mechanical properties of the gradient copolymers were more sensitive to the change in temperature from 9 °C to 75 °C. With recovery temperature increased from 10 °C to 60 °C, the strain recovery of VG copolymer would change steadily from 40% to 99%. However, the elastic recovery of linear and triblock copolymer was poor even at 60 °C. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 860–868     

Effect of Electron Beam Irradiation on the Properties of High Styrene Rubber/Styrene Butadiene Rubber Blends

High styrene rubber (HSR)/styrene butadiene rubber (SBR) blends at different ratios were exposed to various doses of electron beam irradiation. The effect of irradiation dose and blend ratios on the mechanical properties and shape memory characteristics in terms of strain fixation) rate (R_f) and strain recovery rate (R_r) was investigated. The results revealed that rich styrene blends displayed higher tensile strength and hardness than low styrene content blends at all irradiation doses. However, elongation at break, and toughness were lower for rich styrene content. Also, it was observed that for most specimens, the tensile strength, elongation at break and hardness increases up to100 kGy. Increasing irradiation doses resulted in slight deterioration in some mechanical properties only for low styrene content at150 kGy. According to the normalized tensile stress at 25% elongation, it was found that the contribution of irradiation in enhancing the mechanical properties is higher for rich butadiene blends. On the other hand, it was observed that rich styrene content blends possess higher R_f and R_r at all the irradiation doses and stretching temperatures. However, the increase of irradiation dose decreases R_f values; the extent of this decrease depends on the blend ratios. Conversely, for all blends, R_r were increased by increasing irradiation dose and styrene content ratios.     

PAMPS/SiO_2杂化水凝胶的合成及电场敏感性研究

以2-丙烯酰胺-2-甲基丙磺酸(AMPS)为有机原料,正硅酸乙酯(TEOS)为无机原料,过硫酸钾为引发剂,N,N'-亚甲基双丙烯酰胺为交联剂,通过原位-凝胶水溶液聚合法合成了一系列不同二氧化硅含量和不同聚离子浓度的聚(2-丙烯酰胺-2-甲基丙磺酸)/二氧化硅杂化电场敏感性水凝胶.通过扫描电子显微镜(SEM)表征凝胶的结构,研究水凝胶在去离子水以及氯化钠溶液中的溶胀和消溶胀行为.结果表明,系列凝胶的平衡溶胀度介于224.9至325.6之间,复合凝胶的溶胀速率随TEOS用量的增加而降低;除理想杂化凝胶外,随着聚离子浓度的升高,凝胶在氯化钠溶液中的消溶胀速率逐渐减小.对凝胶的电场敏感性研究表明,当聚离子浓度大于氯化钠溶液浓度时,凝胶进一步溶胀,反之则消溶胀,其中杂化凝胶的再溶胀性能减弱,而消溶胀行为变得更为明显.同时制得的理想杂化凝胶,较纯有机凝胶具有更为理想的力学性能,最大抗压缩强度可达23.4 MPa.     

聚丙烯酸丁酯／蓖麻油聚氨酯SEN的研究（Ⅱ）：全SEN

聚丙烯酸丁酯(PnBA)/蓖麻油聚氨酯(COPU)半SEN(Semi-Simultaneous Elastomer Net-work)中,PnBA为线形分子,两组分间只能形成“蛇笼式”的互穿和缠结.这种缠结在外力作用下易脱开,组分间相容性虽较简单混合有所改善,但不甚显著,在某些组分比之下,力学性能也较差.全SEN中两组分均为交联结构,会产生一部分环套式的永久性缠结.只要不发生化学键断裂,这种网间缠结便不能脱开,它将对全SEN的形态、性能及组分间相容性产生较大的影响.     

Effect of Amino Acid Types on the Mechanical and Antimicrobial Properties of Amino Acid-Based Polyionic Liquid Hydrogels

Polyionic liquid hydrogels attract increasing attention due to their unique properties and potential applications. However, research on amino acid-based polyionic liquid hydrogels is still in its infancy stage. Moreover, the effect of amino acid types on the properties of hydrogels is rarely studied to date. In this work, amino acid-based polyionic liquid hydrogels (D/L-PCAA hydrogels) are synthesized by copolymerizing vinyl choline–amino acid ionic liquids and acrylic acids using Al³⁺ as a crosslinking agent and bacterial cellulose (BC) as a reinforcing agent. The effects of amino acid types on mechanical and antimicrobial properties are systematically investigated. D-arginine-based hydrogel (D-PCArg) shows the highest tensile strength (220.7 KPa), D-phenylalanine-based hydrogel (D-PCPhe) exhibits the highest elongation at break (1346%), and L-aspartic acid-based hydrogel (L-PCAsp) has the highest elastic modulus (206.9 KPa) and toughness (1.74 MJ m⁻³). D/L-PCAsp hydrogels demonstrate stronger antibacterial capacity against Escherichia coli and Staphylococcus aureus, and D/L-PCPhe hydrogels possess higher antifungal activity against Cryptococcus neoformans. Moreover, the resultant hydrogels exhibit prominent hemocompatibility and low toxicity, as well as excellent self-healing capabilities (86%) and conductivity (2.8 S m⁻¹). These results indicate that D/L-PCAA hydrogel provides a promise for applications in wound dressings.     

Toughening Mechanism of Nanocomposite Physical Hydrogels Fabricated by a Single Gel Network with Dual Crosslinking——The Roles of the Dual Crosslinking Points

A facile method to fabricate tough and highly stretchable polyacrylamide (PAM) nanocomposite physical hydrogel (NCP gel) was proposed. The hydrogels are dually crosslinked single network with the PAM grafted vinyl hybrid silica nanoparticles (VSNPs) as the analogous covalent crosslinking points and the reversible hydrogen bonds among the PAM chains as the physical crosslinking points. In order to further elucidate the toughening mechanism of the PAM NCP gel, especially to understand the role of the dual crosslinking points, the PAM hybrid hydrogels (H gels) and a series of poly(acrylamide-co-dimethylacrylamide) (P(AM-co-DMAA)) NCP gels were designed and fabricated. Their mechanical properties were compared with those of the PAM NCP gels. The PAM H gels are prepared by simply mixing the PAM chains with bare silica nanoparticles (SNPs). Relative to the poor mechanical properties of the PAM H gel, the PAM NCP gel is remarkably tough and stretchable and also generates large number of micro-cracks to stop notch propagation, indicating the important role of PAM grafted VSNPs in toughening the NCP gel. In the P(AM-co-DMAA) NCP gels, the P(AM-co-DMAA) chains are grafted on VSNPs and the polydimethylacrylamide (PDMAA) only forms very weak hydrogen bonds between themselves. It is found that mechanical properties of the PAM NCP gel, such as the tensile strength and the elongation at break, are enhanced significantly, but those of the P(AM-co-DMAA) NCP gels decreased rapidly with decreasing AM content. This result reveals the role of the hydrogen bonds among the grafted polymer chains as the physical crosslinking points in toughening the NCP gel.     

Radiation Vulcanization of Nitrile Butadiene Rubber/Butadiene Rubber Blends

Blends of nitrile butadiene rubber (NBR) with butadiene rubber (BR) with varying ratios have been prepared. Vulcanization of prepared blends has been induced by ionizing radiation of gamma rays with varying dose up to 250 kGy. Physical properties, namely soluble fraction and swelling number have been followed up using toluene as a solvent. Mechanical properties, namely tensile strength, tensile modulus at 100% elongation and elongation at break have been followed up as a function of irradiation dose, as well as blend composition. Thermal stability of blends was studied by TGA. The result indicated that the addition of NBR has improved the properties of NBR/BR blends. Also, NBR/BR blend is thermally stable than BR alone.