[Tb(CH3COO)3(H2O)2]2的合成及其结构测定

2-羟基吡啶、希土高氯酸盐和乙酸钴在乙腈中反应,制备了九配位化合物[Tb(CH₃COO)₃·2H₂O]₂该晶体为三斜晶系,P1空间群,其晶胞参数为a=8.870(4)Å,b=9.247(1)Å,c=10.586(1)Å,α=65.13(1)°,β=64.43(2)°,γ=62.16(4)°,V=665.97ų,Z=1,F(000)=394。测定了配合物的红外光谱。讨论了它的生成机制。     

双核银配合物Ag2[Ph2P(CH2)2Ph2]4(NO3·CH3OH)2的合成和分子结构研究

The crystal of Ag₂[Ph₂(CH₂)₂Ph₂l₄(NO₃·CH₃OH)₂ is monoclinic, space group P2₁/n, with a=14.741, b= 19.042, c= 18.982Å;β = 110.66°. The molecule has a 2₁ symmetry axis. The four dppe ligands are coordinated in two ways, two ligands bridging the two silver atoms, and the other two ligands chelate to each silver atom separately to form two penta-cycles.     

(LaCl)(THF)2(μ-Cl)4[Li(THF)2]2配合物的合成及晶体结构

LaCl_3和LiCl在THF中于室温反应,以已烷为沉淀剂,在-78℃得到晶体,经色谱、元素分析及X射线晶体结构测定,得到了组成为(LaCl)(THF)_2(μ-Cl)_4[Li(THF)_2]_2的配合物.在约-80℃收集该配合物晶体的衍射强度数据,计算结果表明属于单斜晶系,P2_1/c空间群,其晶胞常数a=10.542(4)(?),b=32.236(14)(?),c=11.182(6)(?);β=113.50(3)°,最后R值为0.0477.四个氯桥键构成了分子的基本骨架,表明桥键在小配体轻希土双金属配合物结构中具有稳定作用.     

稀土配合物Sm2(CH3COO)4(NO3)2(phen)2 的合成、 结构及非等温热分解动力学研究

在水-乙醇混合体系中, 将浓硝酸硝化的Sm2O3与1,10-邻菲啰啉反应, 用冰醋酸调节pH≈4, 形成醋酸根桥联的双核钐配合物［Sm2(CH3COO)4(NO3)2(phen)2］(phen=1,10-邻菲啰啉), 用元素分析、红外光谱和核磁共振谱等进行了表征, 并用X射线衍射测定了配合物的晶体结构, 此外, 对配合物进行了非等温热分解动力学研究. 该晶体属于三斜晶系, P1空间 群, 晶胞参数a=0.979 6(3) nm, b=0.981 3(4) nm, c=1.127 3(4) nm, α=106.666(5)°, β=113.034(5)°, γ=102.656(5)°, V=0.885 4(5) nm3, Z=1, μ=3.361 mm-1, Dc=1.915 g/cm3, F(000)=498, R1=0.059 6, wR2=0.144 8. 该配合物是双核分子, 2个Sm(Ⅲ)离子通过4个醋酸根的羧基桥联, 每个中心离子分别与周围5个来自羧基的桥氧原子、 一个硝酸根的两个氧原子和一个邻菲啰啉分子中的两个氮原子配位, 形成九配位扭曲多面体. 非等温热分解动力学研究结果表明， 配合物第一步热分解反应可能为二级反应, 其动力学方程为dα/dT=A/［βe-E/RT(1-α)2］, 分解反应的表观活化能为344.84 kJ/mol, 指前因子lnA=66.52.     

三价铬丙二酸配合物[Cr(C3H2O4)(H2O)4][Cr(C3H2O4)2(H2O)2]·4H2O的合成、晶体结构及性质研究

在三重桥氧三核铬羧酸配合物的系列研究中,采用与铬的一元羧酸配合物类似的实验条件,以丙二酸为配体合成了不同构型的配合物[Cr(C₃H₂O₄)(H₂O)₄)][Cr(C₃H₂O₄)₂(H₂O)₂]·4H₂O,通过X射线衍射测定了其单晶结构,并对-COO的配位方式作了讨论,还研究了配合物的红外光谱、拉曼光谱、紫外可见光谱、质谱、磁化率等性质,探讨了性质与结构的关系,并由此论证了二元羧酸和铬形成的双齿螯合构型化合物的稳定性.     

[Eu2(TCM)2(DMSO)6]·2DMSO双核笼状稀土配合物的合成与结构

报道一个H3TCM配体在较小尺寸的溶剂DMSO中与稀土离子Eu3+通过自组装形成的双核笼状结构, 从中可进一步看出溶剂分子的尺寸对该双核结构的影响.     

Li(THF)2(μ-Cl)2YCl2(THF)2的晶体和分子结构

配合物Li(THF)_2(μ-Cl)_2YCl_2(THF)_2,M=526.10,结构已由X射线衍射法测定,空间群C_2/c,a=21.333(5),b=10.371(10),c=22.559(4)(?),β=90.87(1)°,V=4990.4(?)~3,Z=8,μ(Cu K_a)=75.378cm~(-1),F(000)=2160,R=0.073。     

(Me3NEt)[Pd(dmit)2]2和(NEt4)[Pd(dmit)2]2 的结构、能带及导电性

合成了导电分子晶体(Me₃NEt)[Pd(dmit)₂]₂和(NEt₄)[Pd(dmit)₂]₂ , 测定了它们的晶体结构和电导-温度曲线. 在能带计算基础上解释了(Me₃NEt)[Pd(dmit)₂]₂的室温电导率(δ = 58(Ω·cm)^-1)高于(NEt₄)[Pd(dmit)₂]₂ (δ = 2.2(Ω·cm)^-1)的原因. (Me₃NEt)[Pd(dmit)₂]₂属单斜晶系, P2₁/m空间群; (NEt₄)[Pd(dmit)₂]₂ 属三斜晶系, P 空间群. 两种晶体的导电组元皆为平面型配位阴离子[Pd(dmit)₂]^0.5-, 它们以面对面形式的二聚体 存在. 凭借肩并肩形式的S…S分子间相互作用, 二聚体进一步形成二[Pd(dmit)₂]₂^1-维导电分子层. 两种配合物的二维导电分子层的微小结构差异导致电导率一个数量级的差别. 变温电导测定还表明, 两种晶体皆为小能隙的半导体.     

反式-[(μ-Cl)2Pd2(DEHSO)2Cl2]配合物的合成及其结构

用萃取法合成反式-[(μ-Cl)₂Pd₂(DEHSO)₂Cl₂](DEHSO系二(2-乙基已基)亚砜的简写),对配合物进行了组成分析、摩尔电导、差热-热重、紫外、红外测试,并经X射线单晶结构分析,确定了配合物的晶体和分子结构。     

配合物[Li(THF)2]2(μ-Cl)4[(η5-CH3C5H4)Nd·THF]的合成及其晶体结构

环戊二烯基希土氯化物是一类合成希土有机配合物的重要前身。     

Synthese und Struktur der Platin(O)-Verbindungen [(dipb)Pt]2(COD) und (dipb)3Pt2 sowie des clusters Hg6[Pt(dipb)]4 (dipb = (i-Pr)2P(CH2)4P(i-Pr)2)

Synthesis and Structure of the Platinum(0) Compounds [(dipb)Pt]₂(COD) and (dipb)₃Pt₂ and of the Cluster Hg₆[Pt(dipb)]₄ (dipb = (i-Pr)₂P(CH₂)₄P(i-Pr)₂) The reduction of (dipb)PtCl₂ with Na/Hg yields (dipb)Pt as an intermediate which reacts with the amalgam to form the cluster Hg₆[Pt(dipb)]₄ ( 3 ) or decomposes to (dipb)₃Pt₂ ( 2 ) and Pt. In the presence of COD [(dipb)Pt]₂(COD) ( 1 ) is obtained. 1 crystallizes monoclinicly in the space group P2₁/c with a = 1596.1(4), b = 996.5(2), c = 1550.4(3) pm, β = 113.65(2)°, Z = 2. In the dinuclear complex two (dipb)Pt units are bridged by a 1,2-η²-5,6-η² bonded COD ligand. Whereby the C = C double bonds are lengthened to 145 pm. 2 forms triclinic crystals with the space group P1 and a = 1002.0(2), b = 1635.9(3), c = 868.2(2) pm, α = 94.70(2)°, β = 94.45(2)°, σ = 87.95(1)°, Z = 1. In 2 two (dipb)Pt moieties are connected by a μ-dipb ligand in a centrosymmetrical arrangement. 3 is monoclinic with the space group C2/c and a = 1273.8(3), b = 4869.2(6), c = 1660.2(3) pm, β = 95.16(2)°, Z = 4. The clusters Hg₆[Pt(dipb)]₄ have the symmetry C₂. Central unit is a Hg₆ octahedron of which four faces are occupied by Pt(dipb) groups. The bonding in the cluster is discussed on the basis of eight Pt? Hg two center bonds of 267.6 pm and two Pt? Hg? Pt three center bonds with Pt? Hg = 288.0 pm.     

噻吩在M(111)(M=Pd,Pt, Au)表面的吸附

采用密度泛函理论(DFT), 选取DMol³程序模块, 对噻吩在M(111) (M=Pd, Pt, Au)表面上的吸附行为进行了探讨. 通过对噻吩在不同底物金属上的吸附能、吸附构型、Mulliken 电荷布居、差分电荷密度以及态密度的分析发现, 噻吩在Pd(111)面上的吸附能最大, Pt(111)面次之, Au(111)面最小. 吸附后, 噻吩在Au(111)面上的构型几乎保持不变, 最终通过S端倾斜吸附于top 位; 噻吩在Pd(111)及Pt(111)面上发生了折叠与变形, 环中氢原子向上翘起, 最终通过环平面平行吸附于hollow 位. 此外, 噻吩环吸附后芳香性遭到了破坏, 环中碳原子发生sp³杂化, 同时电子逐渐由噻吩向M(111)面发生转移, M(111)面上的部分电子也反馈给了噻吩环中的空轨道, 这种协同作用最终导致了噻吩分子稳定吸附于M(111)面.     

噻吩在M(111)(M=Pd,Pt,Au)表面的吸附(英文)

采用密度泛函理论(DFT),选取DMol3程序模块,对噻吩在M(111)(M=Pd,Pt,Au)表面上的吸附行为进行了探讨.通过对噻吩在不同底物金属上的吸附能、吸附构型、Mulliken电荷布居、差分电荷密度以及态密度的分析发现,噻吩在Pd(111)面上的吸附能最大,Pt(111)面次之,Au(111)面最小.吸附后,噻吩在Au(111)面上的构型几乎保持不变,最终通过S端倾斜吸附于top位;噻吩在Pd(111)及Pt(111)面上发生了折叠与变形,环中氢原子向上翘起,最终通过环平面平行吸附于hollow位.此外,噻吩环吸附后芳香性遭到了破坏,环中碳原子发生sp3杂化,同时电子逐渐由噻吩向M(111)面发生转移,M(111)面上的部分电子也反馈给了噻吩环中的空轨道,这种协同作用最终导致了噻吩分子稳定吸附于M(111)面.     

Structures involving unshared electron pair. The Crystal Structures of As(OCOCH3)3 and As2O(OCOCH3)4

As₂O(OCOCH₃)₄, reported now for the first time, was obtained, besides As(OCOCH₃)₃ by dissolving As₂O₃ in acetic anhydride. The crystals of As(OCOCH₃)₃ (A) (monoclinic, space group Cc, Z = 4, a = 9.970(2), b = 13.203(2), c = 8.272(1) Å, β = 117.01(2)°) and of As₂O(OCOCH₃)₄ (B) (monoclinic, space group P2₁/n, Z = 4, a = 13.966(5), b = 8.127(4), c = 12.706(4) Å, β = 95.14(1)°) are built up from discrete molecules defined by chemical formulae As(OCOCH₃)₃ and (CH₃OCO)₂As? O? As(OCOCH₃)₂, respectively. The molecular structure of both compounds is based on the AsO₃ pyramid: in (A) with the As? O bonds of 1.841(6) Å and the O? As? O angle of 89.9(3)° as a mean, in (B) with slightly different values and with the As? O? As angle of 127.7(4)° at the bridging oxygen atom. The additional weak chelating contacts are at the distances As…O from 2.625(9) to 2.745(10) Å in (A) and from 2.72(1) to 2.84(2) in (B). The actual arsenic coordination can be described as very distorted octahedral in (A) and square-pyramidal in (B).     

配合物Ni(DPBP-SAH)2·2CH3CH2OH的合成和晶体结构

A nickel(Ⅱ) complex Ni(DPBP-SAH)₂·2CH₃CH₂OH, (DPBP-SAH=N-(1,3-diphenyl-4-benzylidene-5-pyrazolone)-salicylidene hydrazone), has been synthesized and characterized by elemental analyses, IR spectra and single crystal X-ray diffraction. It belongs to monoclinic, space group C2/c with a=2.737 9(4) nm, b=1.249 2(2) nm, c=1.760 8(2) nm, β=120.212(9)°, M_r=1 065.84, V=5.204(1) nm³, Z=4. The X-ray diffraction reveals that the nickel(Ⅱ) ion in the title complex is in a slightly distorted octahedral arrangement of the ON donor atoms of two DPBP-SAH and two O-donor atoms in ethanol. CCDC: 249394.     

2-Dimensional atomic arrangements of Te on Pt(111) whose coverage is higher than 0.25+

Presented is an in-situ electrochemical STM study on the structural evolution of Te layer on Pt(111) whose coverage is higher than 0.25. The irreversibly adsorbed oxygenated Te layer was reduced to a rectangular (2×3) adlayer of elemental Te (_Te=0.25). As additional Te was deposited underpotentially onto the Te-covered Pt(111) surface in a TeO₂-saturated 0.05 M H₂SO₄ solution, the surface structure of Te evolved from the rectangular (2×3) (_Te=0.25) to a rectangular c(2×3) (_Te=0.50) via a rectangular c(3×3) (_Te=0.33). The adsorbed elemental Te was mobile enough to compress the superlattice structure to denser ones, so that the resulting Te layer became electrochemically inactive in the potential range below 0.55 V.Dedicated to Professor György Horányi, Hungary, on the occasion of his 70th birthday.     

一维链状高价锰配合物[Mn_2(C_7H_4O_3)_4(CH_3OH)_2]·4H_2O_2CH_3OH的合成与结构

合成了一维链状高价锰配合物[Mn2(C7H4O3)4(CH3OH)2]4H2O2CH3OH,并对其进行了IR、X-射线衍射、UV-Vis和TG-DSC等表征。单晶衍射结果表明,该配合物晶体属三斜晶型,空间群P?晶胞参数a=7.653(5),b=10.486(7),c=12.943(8),=103.24(1),?=104.55(1),?=110.11(1),V=885.4(9)3,Z=1。UV-Vis光谱在547nm有一个吸收峰,相应于Mn(Ⅳ)的d-d电子跃迁光谱。     

糠醛在Pt(111)表面的吸附和脱碳反应

采用广义梯度近似的密度泛函理论并结合平板模型的方法, 优化了糠醛分子在Pt(111)面的吸附模型,并探究了糠醛脱碳反应形成呋喃的机理. 结果表明: 吸附后糠醛分子环上的C―H(O)键及支链―CHO相对于金属表面倾斜上翘, 分子平面被扭曲, 易于呋喃的形成; 同时, 糠醛分子向Pt表面转移电子0.765e, 环中的大π键与Pt(111)表面的d轨道发生较强的相互作用, 使得糠醛的芳香性被破坏, 环上的碳原子呈现准sp³杂化. 此外, 对糠醛脱碳反应中的各反应步骤进行过渡态搜索, 通过比较各步骤的活化能, 得出糠醛更易先失去支链上的H形成酰基中间体(C₄H₃O)CO, 中间体继续脱碳加氢形成产物呋喃. 该过程的控速步骤为(C₄H₃O)CO^*+^*→C₄H₃O^*+CO^* (^*为吸附位),活化能为127.65 kJ·mol^-1.     

氧原子在具有Pt皮肤的Pt3Ni(111)表面的吸附和扩散

用基于密度泛函理论的第一性原理方法研究了氧原子在具有Pt皮肤的Pt3Ni(111)[记为Pt-skin-Pt3Ni(111)]表面的吸附和扩散特性. 重点研究了氧原子在Pt-skin-Pt3Ni(111)表面的扩散问题, 这对理解Pt-skin-Pt3Ni(111)催化剂的高催化活性有重要意义. 结果表明: 氧原子容易吸附在fcc位; 催化剂Pt3Ni中的Ni原子对催化剂的电子结构有很大影响, 从而改变了其对氧原子的吸附. 用推拉弹性带(NEB)方法搜索氧原子的扩散势垒, 并解释了Pt-skin-Pt3Ni(111)催化剂的高催化活性.     

新型-meso-四(4-十四氨基甲酰苯基)卟啉及其-金属（Co）配合物的合成与液晶性能

对羧基苯甲醛和吡咯经缩合反应制得meso-四(4-羧基苯基)卟啉(1); 1与氯化亚砜反应得meso-四(4-氯甲酰基苯基)卟啉(2); 2与n-十四胺反应制得meso-四(4-十四氨基甲酰苯基)卟啉(3); 3与CoC_l2经配位反应合成了meso-四(4-十四氨基甲酰苯基)卟啉钴(4)。 3和4为新化合物,其结构经U-Vis, ¹H NMR和IR表征。偏光显微镜和DSC检测结果表明： 3和4具有液晶性能。