离子液体型表面活性剂研究

以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF₄]及[bmim][PF₆])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF₄]及[hmim][PF₆])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C₁₆mim][BF₄]及[C₁₆mim][PF₆])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF₄]及[2-hemim][PF₆])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF₄]及[eocmmim][PF₆]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C₁₆mim][BF₄]和[C₁₆mim][PF₆]具有发泡性能, 发泡力分别为68和120 mm.     

环氧有机硅阳离子型光敏预聚物的合成及其光敏性能的研究

合成了环氧有机硅光敏预聚物及阳离子光引发剂甲苯茂铁四氟硼酸盐 ,研究光引发剂种类、预聚物与单体配比、增感剂结构等因素对固化速度的影响 ,发现预聚物体系的感度较高 ,最小感度值为 1 65mJ/cm² ;并讨论了甲苯茂铁四氟硼酸盐的暗聚合能力     

亚乙基桥联双茚锆、铪配合物的合成及催化丙烯选择性齐聚研究:茚环3-位取代基的影响

设计并合成了12个亚乙基桥联双茚类锆、铪配合物meso-/rac-1～7[ansa-C₂H₄-(3-R-4,7-Me₂-C₉H₃)₂MCl₂:M=Zr R=ⁿBu (meso-/rac-1),ⁱPr (meso-2),CH₂Cy (meso-/rac-3),Bn (meso-/rac-4),CH₂C₆H₄(4-CH₃)(meso-/rac-5);M=Hf,R=CH₂C₆H₄(4-CH₃)(meso-/rac-7);ansa-C₂H₄-{2-Me-3-Bn-5,6-[1,3-(CH₂)₃]C₉     

新型金属-双二硫杂戊烯(M-BDT)配合物的合成、表征及X射线的指标化

合成了4个新型NiBDT配位化合物,BDT为具有9个S原子的杂戊烯.元素分析、IR谱、UV谱确定这4个新配合物的化学式分别为[(CH₃)₄N]₂[Ni(C₅S₉)₂](1),[(C₂H₅)₄N]₂·[Ni(C₅S₉)₂](2),[(C₄H₉)₄N]₂[Ni(C₅S₉)₂](3),[(C₆H₅)(CH₃)₃N]₂[Ni(C₅S₉)₂](4).采用Ito法对配合物1的X射线粉末图进行了指标化,确定该晶体属单斜晶系,简单晶格,晶胞参数:a=0.680nm,b=0.714nm,c=2.302nm,γ=111.4°,Z=2.     

两个含N-皮考林酰肼铁配合物的合成和结构表征

合成了含N-乙酰皮考林酰肼(简写为Haphz)的铁配合物[Fe₂(aphz)₂(μ-CH₃O)₂Cl₂]·CH₃OH(1,C₁₉H₂₆Cl₂Fe₂N₆O₇,Mr=633.06)和含N-苯甲酰皮考林酰肼(简写为Hphphz)的铁配合物Fe(phphz)Cl₂(2,C₁₃H₁₀Cl₂FeN₃O₂,Mr=366.99).2个配合物均属三斜晶系,空间群为P     

巯基乙酸酯官能团修饰的铁氢化酶模拟化合物的合成及表征

对铁氢化酶活性中心进行化学模拟将有可能产生出新型的产氢催化剂.本文利用Sonogashira偶联反应,合成了一种巯基乙酸酯官能团修饰的铁氢化酶活性中心模拟化合物[Fe₂(CO)₆(-μadt)C₆H₄C≡CC₆H₄O(CH₂)₅SC(O)CH₃-4](7),将巯基乙酸酯官能团引入到铁氢化酶活性中心,为进一步制备新型的固载化产氢材料奠定了基础.电化学研究表明,化合物7具有明显的催化产氢特征,在电化学条件下可以催化醋酸放出氢气.     

三种不同碳桥联双核茂钛配合物的合成及催化乙烯聚合研究

合成了3种不同结构的CnH₂n桥联双核茂钛配合物(CH₃)₂C[(C₅H₄)TiCl₂(C₅H₅)]₂(3),(CH₂)_n[(C₅H₄)TiCl₂(C₅H₅)]₂(6,n=3;7,n=4),并用1HNMR进行了表征.发现以甲苯为溶剂时,不仅提高了产率,而且有效地避免了副产物Cp₂TiCl₂的生成.研究了化合物7/MAO(甲基铝氧烷)催化乙烯聚合的反应,考察了反应条件对催化体系的影响.结果表明,催化活性随着n(Al)/n(Cat.)比的增大而提高,聚乙烯的分子量在n(Al)/n(Cat.)=500和50℃时达到最高值9.0102×10⁴;随着聚合时间的延长,催化活性下降,而产物分子量不断升高;随着温度的上升,50℃时催化活性和聚乙烯的分子量最高,分别为2.4074×10⁵gPE/(molTi·h)和6.8679×10⁴.随着桥联双核茂钛配合物碳桥的增长,催化活性增加,所得聚乙烯的分子量降低.     

硅宾/有机铝的Lewis酸碱对体系及其丙烯酸酯聚合的引发性能

研究了硅宾/有机铝组成的Lewis酸碱对(LP)体系引发丙烯酸酯类单体聚合的性能,合成了4种硅宾:L(Ph₂P)Si(Si-1, L=Ph C(N^tBu)₂)、L[4-MeC₆H₄(Ph₂P)N]Si (Si-2)、L[2,6-ⁱPr₂C₆H₃(1,5-C₈H₁₄B)N]Si (Si-3)、L(LSi)Si (Si-4)和6种有机铝:Al(C₆F₅)₃、AlMe(BHT)₂、AlⁱBu(BHT)₂、AlⁱBu₂(BHT)、AlⁱBu(BHT*)₂、AlⁱBu₂(BHT...     

三硼八氢N-二茂铁甲基三甲基铵的晶体结构

本文报导了C₅H₅FeC₅H₄CH₂N(CH₃)₃B₃H₈化合物的晶体结构,讨论了二个戊二烯环遮盖的原因。     

Ru-Fe异金属化合物及其在Au表面上SAM的电化学研究

为使不对称Ru-Fe化合物能在表面上自组装形成单分子膜,对trans-RuCl(dppm)₂(C≡CFc)[Fc=C₅H₄FeC₅H₅,dppm=(C₆H₅)₂PCH₂P(C₆H₅)₂](1)进行修饰,得到Ru(dppm)₂(C≡CFc)(C≡CPhOCH₃)(2),[Ru(dppm)₂(C≡CFc)(N≡CCH₂CH₂NH₂)][PF₆](3)和[Ru(dppm)₂(C≡CFc)(N≡CCH₂CH₂NHC(O)·(CH₂)₁₀SH)][PF₆](4),并详细研究了该系列化合物的电化学性质.循环伏安结果显示出Ru周围配体得失电子能力的差别,直接影响了Ru中心的氧化-还原性,但这种影响并没有通过共轭的炔键传递到二茂铁中的Fe中心.化合物4可以在Au表面上自组装形成稳定、有序的单分子膜.还利用循环伏安法研究了单分子膜的形成过程及其表面覆盖率.     

Mixed-valence nickel-iron dithiolate models of the [NiFe]-hydrogenase active site

A series of mixed-valence nickel-iron dithiolates is described. Oxidation of (diphosphine)Ni(dithiolate)Fe(CO)(3) complexes 1, 2, and 3 with ferrocenium salts affords the corresponding tricarbonyl cations [(dppe)Ni(pdt)Fe(CO)(3)](+) ([1](+)), [(dppe)Ni(edt)Fe(CO)(3)](+) ([2](+)) and [(dcpe)Ni(pdt)Fe(CO)(3)](+) ([3](+)), respectively, where dppe = Ph(2)PCH(2)CH(2)PPh(2), dcpe = Cy(2)PCH(2)CH(2)PCy(2), (Cy = cyclohexyl), pdtH(2) = HSCH(2)CH(2)CH(2)SH, and edtH(2) = HSCH(2)CH(2)SH. The cation [2](+) proved unstable, but the propanedithiolates are robust. IR and EPR spectroscopic measurements indicate that these species exist as C(s)-symmetric species. Crystallographic characterization of [3]BF(4) shows that Ni is square planar. Interaction of [1]BF(4) with P-donor ligands (L) afforded a series of substituted derivatives of type [(dppe)Ni(pdt)Fe(CO)(2)L]BF(4) for L = P(OPh)(3) ([4a]BF(4)), P(p-C(6)H(4)Cl)(3) ([4b]BF(4)), PPh(2)(2-py) ([4c]BF(4)), PPh(2)(OEt) ([4d]BF(4)), PPh(3) ([4e]BF(4)), PPh(2)(o-C(6)H(4)OMe) ([4f]BF(4)), PPh(2)(o-C(6)H(4)OCH(2)OMe) ([4g]BF(4)), P(p-tol)(3) ([4h]BF(4)), P(p-C(6)H(4)OMe)(3) ([4i]BF(4)), and PMePh(2) ([4j]BF(4)). EPR analysis indicates that ethanedithiolate [2](+) exists as a single species at 110 K, whereas the propanedithiolate cations exist as a mixture of two conformers, which are proposed to be related through a flip of the chelate ring. M?ssbauer spectra of 1 and oxidized S = 1/2 [4e]BF(4) are both consistent with a low-spin Fe(I) state. The hyperfine coupling tensor of [4e]BF(4) has a small isotropic component and significant anisotropy. DFT calculations using the BP86, B3LYP, and PBE0 exchange-correlation functionals agree with the structural and spectroscopic data, suggesting that the SOMOs in complexes of the present type are localized in an Fe(I)-centered d(z(2)) orbital. The DFT calculations allow an assignment of oxidation states of the metals and rationalization of the conformers detected by EPR spectroscopy. Treatment of [1](+) with CN(-) and compact basic phosphines results in complex reactions. With dppe, [1](+) undergoes quasi-disproportionation to give 1 and the diamagnetic complex [(dppe)Ni(pdt)Fe(CO)(2)(dppe)](2+) ([5](2+)), which features square-planar Ni linked to an octahedral Fe center.     

Mono- and dinuclear molybdenum complexes with sterically demanding cycloheptatrienyl ligands

Sterically demanding cycloheptatrienylium (tropylium) salts of the type (1,3,5-C7H4R3)BF4 [R = t-Bu, (3a)BF4; R = SiMe3, (3b)BF4] have been prepared from the corresponding 1,3,5-trisubstituted benzene derivatives 1 by ring expansion with diazomethane followed by hydride abstraction with triphenylcarbenium tetrafluoroborate, (Ph3C)BF4. Complexation can be achieved by arene exchange and Mo(CO)3 group transfer employing [(eta6-p-xylene)Mo(CO)3] (4) to yield the cationic complexes (5)BF4. In refluxing mesitylene, [(eta7-C7H4t-Bu3)Mo(CO)3]BF4, (5a)BF4, undergoes CO substitution to furnish the mesitylene sandwich complex (6a)BF4. A cyclic voltammetric study reveals that this complex exhibits a reversible one-electron oxidation to the dicationic 17e complex 6a2+, which can also be accessed by chemical oxidation with AgBF4. On the contrary, the reduction of 6a+ is irreversible and does not yield a stable 19e complex 6a. To study the fate of the reduced 19e form, (5a)BF4 was treated with Na2Hg to diastereoselectively afford the C-C coupled bicycloheptatriene complex 7a. Paramagnetic, dinuclear complexes of the type [(eta7-C7H4R3)Mo(mu-Cl)3Mo(eta7-C7H4R3)] (8) have been obtained from the reaction of (5)BF4 with Me3SiCl. These can be regarded as mixed-valence Mo(0)/Mo(+I) compounds with a metal-metal bond order of 0.5. Cyclic voltammetric studies reveal that both complexes 8a and 8b undergo reversible one-electron oxidation as well as reduction. Treatment with one equivalent of ferrocenium hexafluorophosphate leads to removal of the unpaired electron and formation of the diamagnetic complexes (8)PF6. Theoretical DFT calculations have been carried out to further elucidate the bonding in these systems. In addition, the X-ray crystal structures of (5b)BF4, (6a)BF4 x CH2Cl2, (6a)(BF4)2 x (acetone)2, 7a x CH2Cl2, 8a x 0.5C6H14, and (8a)PF6 x Et2O are reported.     

Synthesis and reactivity of fluorinated ferracarborane anions

The ferracarborane [N(PPh3)2][6,6,6,10,10,10-(CO)6-closo-6,10,1-Fe2CB7H8] reacts in CH2Cl2 with 3 molar equivalents of Ag[PF6] to yield the trifluoro-substituted species [N(PPh3)2][7,8,9-F3-6,6,6,10,10,10-(CO)6-closo-6,10,1-Fe2CB7H5]. Compound undergoes structural rearrangement in toluene at reflux temperatures, forming [N(PPh3)2][8,9,10-F3-6,6,6,7,7,7-(CO)6-closo-6,7,1-Fe2CB7H5]. Alternatively, reaction of either or with a 10-fold excess of Ag[PF6] in CH2Cl2 forms two species: namely, [N(PPh3)2][2,7,9,10-F4-6,6,6,8,8,8-(CO)6-closo-6,8,1-Fe2CB7H4], in which one further B-F substitution has occurred and the {Fe2CB7} cluster core has rearranged, plus a mono-iron co-product, [N(PPh3)2][3,8,9-F3-7,7,7-(CO)3-closo-7,1-FeCB7H5] that is formed by polyhedral contraction. Treatment of with [NO][BF4] in CH2Cl2 results in CO substitution at the 4-connected iron vertex [Fe10], producing the zwitterionic complex [7,8,9-F3-6,6,6,10,10-(CO)5-10-NO-closo-6,10,1-Fe2CB7H5]. Addition of Me3NO to a mixture of and PEt3 in CH2Cl2 also results in CO substitution, forming the isomeric species [N(PPh3)2][7,8,9-F3-6,6,m,10,10-(CO)5-n-PEt3-closo-6,10,1-Fe2CB7H5] [m=6, n=10; m=10, n=6] in a 5:1 ratio. Treatment of with [NO][BF4] and then CNBut in CH2Cl2 allows further, successive CO substitution at Fe10 to yield first a neutral, zwitterionic complex [7,8,9-F3-6,6,6,10-(CO)4-10-NO-10-PEt3-closo-6,10,1-Fe2CB7H5] and then [7,8,9-F3-6,6,6-(CO)3-10-CNBut-10-NO-10-PEt3-closo-6,10,1-Fe2CB7H5]. The molecular structures of compounds and have been established by X-ray diffraction.     

From calcium interaction to calcium electrochemical detection by [(C5H5)Fe(C5H4COCH=CHC6H4NEt2)] and its two novel structurally characterized derivatives

[(C(5)H(5))Fe(C(5)H(4)COCH=CHC(6)H(4)NEt(2))] (1) has been electrochemically evaluated toward different cations in solution. Calcium sensing by this compound and its two new derivatives [(C(5)H(5))Fe(C(5)H(4)CO(CH=CH)(2)C(6)H(4)NMe(2))] (2) and [(C(5)H(5))Fe(C(5)H(4)CH=CHCOCH=CHC(6)H(4)NEt(2))] (3) that exhibit a conjugated link between the ferrocene unit and the nitrogen atom has been thoroughly examined. Compounds 2 and 3 have been structurally characterized by single-crystal X-ray diffraction studies. The three related protonated species [1H][BF(4)] (4), [2H][BF(4)] (5), and [3H][BF(4)] (6) have been isolated in a good yield. NMR experiments clearly established that calcium interaction occurs in the vicinity of the carbonyl group, and mass spectrometry studies confirmed that this interaction, which involves several ligand-Ca(2+) adducts, is complex. A combination of electrochemical and NMR experiments highlighted an original salt influence on the electrochemical calcium sensing result.     

Synthesis and properties of Rh(I) and Ir(I) distibine complexes with organometallic co-ligands

The first series of Rh(I) distibine complexes with organometallic co-ligands is described, including the five-coordinate [Rh(cod)(distibine)Cl], the 16-electron planar cations [Rh(cod)(distibine)]BF4 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 and the five-coordinate [Rh(CO)(distibine)2][Rh(CO)2Cl2] (distibine=R2Sb(CH2)3SbR2, R=Ph or Me, and o-C6H4(CH2SbMe2)2). The corresponding Ir(I) species [Ir(cod)(distibine)]BF4 and [Ir{Ph2Sb(CH2)3SbPh2}2]BF4 have also been prepared. The complexes have been characterised by 1H and 13C{1H} NMR and IR spectroscopy, electrospray mass spectrometry and microanalysis. The crystal structure of the anion exchanged [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF(6).3/4CH2Cl2 is also described. The methyl-substituted distibine complexes are less stable than the complexes of Ph2Sb(CH2)3SbPh2, with C-Sb fission occurring in some of the complexes of the former. The salts [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF6 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 undergo oxidative addition with Br2 to give the known [RhBr2{Ph2Sb(CH2)3SbPh2}2]+, while using HCl gives the same hydride complex from both precursors, which is tentatively assigned as [RhHCl2{Ph2Sb(CH2)3SbPh2}]. An unexpected further Rh(III) product from this reaction, trans-[RhCl2{Ph2Sb(CH2)3SbPh2}{PhClSb(CH2)3SbClPh}]Cl, was identified by a crystal structure analysis and represents the first structurally characterised example of a chlorostibine coordinated to a metal. [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 reacts with CO to give [Rh(CO){Ph2Sb(CH2)3SbPh2}2]BF4 initially, and upon further exposure this species undergoes further reversible carbonylation to give a cis-dicarbonyl species thought to be [Rh(CO)2{Ph2Sb(CH2)3SbPh2}{kappa1Sb-Ph2Sb(CH2)3SbPh2}]BF4 which converts back to the monocarbonyl complex when the CO atmosphere is replaced with N2.     

Syntheses, solution multi-NMR characterization, and reactivities of [C6F5Xe]+ salts of weakly coordinating borate anions, [BY4]- (Y = CF3, C6F5, CN, or OTeF5)

New examples of [C6F5Xe]+ salts of the weakly coordinating anions [B(CF3)4]-, [B(C6F5)4]-, [B(CN)4]-, and [B(OTeF5)4]- have been synthesized by metathesis reactions of [C6F5Xe][BF4] with the corresponding MI[BY4] salts (MI = K or Cs; Y = CF3, C6F5, CN, or OTeF5). The salts were characterized in solution by multi-NMR spectroscopy. Their stabilities in prototypic solvents (CH3CN and CH2Cl2) and decomposition products are reported. The influence of the coordinating nature of [BY4]- on the decomposition rate of [C6F5Xe]+ as well as the presence of the weakly nucleophilic [BF4]- ion has been studied. The electrophilic pentafluorophenylation of C6H5F by [C6F5Xe][BY4] in solvents of different coordinating abilities (CH3CN and CH2Cl2) and the effects of stronger nucleophiles (fluoride and water) on the pentafluorophenylation process have been investigated. Simulations of the 19F and 129Xe NMR spectra of [C6F5Xe]+ have provided the complete set of aryl 19F-19F and 129Xe-19F coupling constants and their relative signs. The 19F NMR parameters of the [C6F5Xe]+ cation in the present series of salts are shown to reflect the relative degrees of cation-solvent interactions.     

Metallacycles of iron, zinc, and cadmium assembled by polytopic bis(pyrazolyl)methane ligands and fluoride abstraction from BF4-

Reactions of the arene-linked bis(pyrazolyl)methane ligands m-bis[bis(1-pyrazolyl)methyl]benzene (m-[CH(pz)2]2C6H4, Lm) and 1,3,5-tris[bis(1-pyrazolyl)methyl]benzene (1,3,5-[CH(pz)2]3C6H3, L3) with BF4- salts of divalent iron, zinc, and cadmium result in fluoride abstraction from BF4- and formation of fluoride-bridged metallacyclic complexes. Treatment of Fe(BF4)2.6H2O and Zn(BF4)2.5H2O with Lm leads to the complexes [Fe2(mu-F)(mu-Lm)2](BF4)3 (1) and [Zn2(mu-F)(mu-Lm)2](BF4)3 (2), in which a single fluoride ligand and two Lm molecules bridge the two metal centers. The reaction of [Cd2(thf)5](BF4)4 with Lm results in the complex [Cd2(mu-F)2(mu-Lm)2](BF4)2 (3), which contains dimeric cations in which two fluoride and two Lm ligands bridge the cadmium centers. Equimolar amounts of the tritopic ligand L3 and Zn(BF4)2.5H2O react to give the related monofluoride-bridged complex [Zn2(mu-F)(mu-L3)2](BF4)3 (4), in which one bis(pyrazolyl)methane unit on each ligand remains unbound. NMR spectroscopic studies show that in acetonitrile the zinc metallacycles observed in the solid-state remain intact in solution.     

Novel dimetal bridging carbene complexes derived from a terminal carbonyl dimetal compound. Syntheses, structures and reactivities of 7H-indene-coordinated diiron bridging carbene complexes

Pentacarbonyl-7H-indenediiron, [Fe2(CO)5(eta3,eta5-C9H8)] (1), reacts with aryllithium, ArLi (Ar = C6H5, p-C6H5C6H4), followed by alkylation with Et3OBF4 to give novel 7H-indene-coordinated diiron bridging alkoxycarbene complexes [Fe2{mu-C(OC2H5)Ar}(CO)4(eta4,eta4-C9H8)] (2, Ar = C6H5; 3, Ar = p-C6H5C6H4). Complexes 2 and 3 react with HBF4.Et2O at low temperature to yield cationic bridging carbyne complexes [Fe2(mu-CAr)(CO)4(eta4,eta4-C9H8)]BF4 (4, Ar = C6H5; 5, Ar = p-C6H5C6H4). Cationic 4 and 5 react with NaBH4 in THF at low temperature to afford diiron bridging arylcarbene complexes [Fe2{mu-C(H)Ar}(CO)4(eta4,eta4-C9H8)] (6, Ar = C6H5; 7, Ar = p-C6H5C6H4). The similar reactions of 4 and 5 with NaSC6H4CH3-p produce the bridging arylthiocarbene complexes [Fe2{mu-C(Ar)SC6H4CH3-p}(CO)4(eta4,eta4-C9H8)] (8, Ar = C6H5; 9, Ar = p-C6H5C6H4). Cationic 4 and 5 can also react with anionic carbonylmetal compounds Na[M(CO)5(CN)] (M = Cr, Mo, W) to give the diiron bridging aryl(pentacarbonylcyanometal)carbene complexes [Fe2{mu-C(Ar)NCM(CO)5}(CO)4(eta4,eta4-C9H8)] (10, Ar = C6H5, M = Cr; 11, Ar = p-C6H5C6H4, M = Cr; 12, Ar = C6H5, M = Mo; 13, Ar = p-C6H5C6H4, M = Mo; 14, Ar = C6H5, M = W; 15, Ar = p-C6H5C6H4, M = W). Interestingly, in CH2Cl2 solution at room temperature complexes 10-15 were transformed into the isomerized 7H-indene-coordinated monoiron complexes [Fe(CO)2(eta5-C9H8)C(Ar)NCM(CO)5] (16, Ar = C6H5, M = Cr; 17, Ar = p-C6H5C6H4, M = Cr; 18, Ar = C6H5, M = Mo; 19, Ar = p-C6H5C6H4, M = Mo; 20, Ar = C6H5, M = W; 21, Ar = p-C6H5C6H4, M = W), while complex 3 was converted into a novel ring addition product [Fe2{C(OC2H5)C6H4C6H5-p-(eta2,eta5-C9H8)}(CO)5] (22) under the same conditions. The structures of complexes 2, 6, 8, 14, 18 and 22 have been established by X-ray diffraction studies.     

Design and crystal structures of triple helicates with crystallographic idealized D3 symmetry: the role of side chain effect on crystal packing

Novel crystallographic D3-symmetric binuclear triple molecular helices [Co2L(1)3][BF4]4 (1), [Zn2L(1)3][BF4]4 (2), [Mn2L(1)3][BF4]4 (3), [Co2L(2)3][BF4]4 (4), [Zn2L(2)3][BF4]4 (5), and [Mn2L(2)3][BF4]4 (6) have been achieved to establish the side chain effect on molecular packing, where L1 is [(C5H4N)C(CH3)=N-(C6H4)-]2CH2 and L2 is [(C5H4N)C(CH3)=N-(C6H4)-]2O, respectively. Crystal structure analyses show that each helix crystallizes in a hexagonal crystal system with space group Pc1 and the general axis of the helix occupies the crystallographic 3-fold axial position with the other three crystallographic 2-fold symmetries perpendicular to it. Each metal center is bound to three pyridylimine units to attain C3 pseudooctahedral coordination geometry with respective equivalent metal-N (CH=N) and metal-N (pyridyl) bonds. It is speculated that the existence of the methyl group might minimize the potential intermolecular interactions, which would be the essential factor controlling the helices formed in idealized crystallographic D3 symmetry. Moreover, crystallographic idealized C3-symmetric helicates [Co2L(3)3][BF4]4 (7), [Zn2L(3)3][BF4]4 (8), [Ni2L(3)3][BF4]4 (9), and [Cu2L(3)3][BF4]4 (10) were also structurally characterized for comparison, where L3 is [(C5H4N)C(CH3)=N-]2. All the results indicate that the existence of the methyl group in the side chain of aromatic ligands could effectively reduce the potential - intermolecular interactions and the side chain effect of the methyl group in crystal packing is robust enough to be exchanged from one network structure to another, which ensures the generality and predictability of the crystallographic idealized symmetry formation to a certain extent.     

Electroswitchable photoluminescence activity: synthesis, spectroscopy, electrochemistry, photophysics, and X-ray crystal and electronic structures of [Re(bpy)(CO)3(C[triple bond]C[bond]C6H4[bond]C[triple bond]C)Fe(C5Me5)(dppe)][PF6](n) (n = 0, 1)

A novel heterobimetallic alkynyl-bridged complex, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)Me(5))(dppe)], 1, and its oxidized species, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)Me(5))(dppe)][PF(6)], 2, have been synthesized and their X-ray crystal structures determined. A related vinylidene complex, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond](H)C[double bond]C)Fe(C(5)Me(5))(dppe)][PF(6)], 3, has also been synthesized and characterized. The cyclic voltammogram of 1 shows a quasireversible reduction couple at -1.49 V (vs SCE), a fully reversible oxidation at -0.19 V, and a quasireversible oxidation at +0.88 V. In accord with the electrochemical results, density-functional theory calculations on the hydrogen-substituted model complex Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)H(5))(dHpe) (Cp = C(5)H(5), dHpe = H(2)P[bond](CH(2))(2)[bond]PH(2)) (1-H) show that the LUMO is mainly bipyridine ligand pi* in character while the HOMO is largely iron(II) d orbital in character. The electronic absorption spectrum of 1 shows low-energy absorption at 390 nm with a 420 nm shoulder in CH(2)Cl(2), while that of 2 exhibits less intense low-energy bands at 432 and 474 nm and additional low-energy bands in the NIR at ca. 830, 1389, and 1773 nm. Unlike the related luminescent rhenium(I)-alkynyl complex [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C[bond]H)], 4, complex 1 is found to be nonemissive, and such a phenomenon is attributed to an intramolecular quenching of the emissive d pi(Re) --> pi*(bpy) (3)MLCT state by the low-lying MLCT and LF excited states of the iron moiety. Interestingly, switching on of the luminescence property derived from the d pi(Re) --> pi*(bpy) (3)MLCT state can be demonstrated in the oxidized species 2 and the related vinylidene analogue 3 due to the absence of the quenching pathway.