Manganese catalyzed asymmetric transfer hydrogenation of ketones

The asymmetric transfer hydrogenation (ATH) of a wide range of ketones catalyzed by manganese complex as well as chiral P_xN_y-type ligand under mild conditions was investigated. Using 2-propanol as hydrogen source, various ketones could be enantioselectively hydrogenated by combining cheap, readily available [MnBr(CO)₅] with chiral, 22-membered macrocyclic ligand (R,R,R',R')-CyP₂N₄ (L5) with 2 mol% of catalyst loading, affording highly valuable chiral alcohols with up to 95% ee.     

Ruthenium-catalyzed asymmetric transfer hydrogenation of ketones in ethanol

A ruthenium catalyst formed in situ by combining [Ru(p-cymene)Cl₂]₂ and an amino acid hydroxy-amide was found to catalyze efficiently the asymmetric reduction of aryl alkyl ketones under transfer hydrogenation conditions using ethanol as the hydrogen donor. The secondary alcohol products were obtained in moderate to good yields and with good to excellent enantioselectivity (up to 97% ee).     

A soluble-polymer system for the asymmetric transfer hydrogenation of ketones

The appropriate combination of methacrylate polymers permits the synthesis of a soluble polymer for use in ruthenium(II)-catalyzed asymmetric transfer hydrogenation reactions. Using a 7:3 copolymer of a poly(ethylene glycol) ester and a hydroxyethyl ester, a derived ruthenium(II)/norephedrine complex catalyses reduction of acetophenone in up to 95% yield and 81% ee.     

Accelerated asymmetric transfer hydrogenation of aromatic ketones in water

Asymmetric transfer hydrogenation of various simple aromatic ketones by the Ru-TsDPEN catalyst was shown to be feasible in aqueous HCOONa without calling for any catalyst modification, furnishing ee's of up to 95% and significantly faster rates than in the HCOOH-NEt(3) azeotrope.     

Osmium pyme complexes for fast hydrogenation and asymmetric transfer hydrogenation of ketones

The osmium compound trans,cis-[OsCl2(PPh3)2(Pyme)] (1) (Pyme=1-(pyridin-2-yl)methanamine), obtained from [OsCl2(PPh3)3] and Pyme, thermally isomerizes to cis,cis-[OsCl2(PPh3)(2)(Pyme)] (2) in mesitylene at 150 degrees C. Reaction of [OsCl2(PPh3)3] with Ph2P(CH2)(4)PPh2 (dppb) and Pyme in mesitylene (150 degrees C, 4 h) leads to a mixture of trans-[OsCl2(dppb)(Pyme)] (3) and cis-[OsCl2(dppb)(Pyme)] (4) in about an 1:3 molar ratio. The complex trans-[OsCl2(dppb)(Pyet)] (5) (Pyet=2-(pyridin-2-yl)ethanamine) is formed by reaction of [OsCl2(PPh3)3] with dppb and Pyet in toluene at reflux. Compounds 1, 2, 5 and the mixture of isomers 3/4 efficiently catalyze the transfer hydrogenation (TH) of different ketones in refluxing 2-propanol and in the presence of NaOiPr (2.0 mol %). Interestingly, 3/4 has been proven to reduce different ketones (even bulky) by means of TH with a remarkably high turnover frequency (TOF up to 5.7 x 10(5) h(-1)) and at very low loading (0.05-0.001 mol %). The system 3/4 also efficiently catalyzes the hydrogenation of many ketones (H2, 5.0 atm) in ethanol with KOtBu (2.0 mol %) at 70 degrees C (TOF up to 1.5 x 10(4) h(-1)). The in-situ-generated catalysts prepared by the reaction of [OsCl2(PPh3)3] with Josiphos diphosphanes and (+/-)-1-alkyl-substituted Pyme ligands, promote the enantioselective TH of different ketones with 91-96 % ee (ee=enantiomeric excess) and with a TOF of up to 1.9 x 10(4) h(-1) at 60 degrees C.     

Enantioswitchable catalysts for the asymmetric transfer hydrogenation of aryl alkyl ketones

A subtle change in the ligand structure, replacing the carbonyl oxygen with sulfur in simple alpha-amino acid amides, resulted in a dramatic activity and selectivity improvement in the rhodium- or ruthenium-catalyzed reduction of ketones under hydrogen transfer conditions. In addition, in most cases, a switch of the product's absolute configuration was observed on going from amides to the corresponding thioamides. Under optimized conditions, we obtained the secondary alcohol products in high yield and enantioselectivity (up to 97% ee) using only 0.25 mol % catalyst loading. [structure: see text]     

Continuous homogeneous asymmetric transfer hydrogenation of ketones: lessons from kinetics

Is polymer enlargement of homogeneous catalysts a tedious task? Is not batch operation with homogeneous catalysts the optimum performance point for homogeneous catalysis? Is kinetic modelling relevant to more than academic questions in homogeneous catalysis? Can all answers for a given system be answered satisfactory? In the authors’ view, answers to these questions are no, no, yes, and depends. Polymer enlargement allowed the continuous operation of transfer hydrogenation in a chemical membrane reactor with total turnover numbers of up to 2.6×10³ and a space–time yield of 0.58 kg L^?1 d^?1 with an enantiomeric ratio of 26.8 (enantiomeric excess 92.8 %) for a conversion level of 80 %. This was predicted from simulation conducted with a model from kinetic batch experiments adopted for continuous application. These simulations for the polymer‐enlarged and the unmodified catalyst show that achieving comparable performance cannot be obtained by batch operation.     

General asymmetric hydrogenation of hetero-aromatic ketones

trans-RuCl(2)[(R)-xylbinap][(R)-daipen] or the S,S complex acts as an efficient catalyst for asymmetric hydrogenation of hetero-aromatic ketones. The hydrogenation proceeds with a substrate-to-catalyst molar ratio of 1000-40000 to give chiral alcohols in high ee and high yield. The enantioselectivity appears to be little affected by the properties of the hetero-aromatic ring. This method allows for asymmetric synthesis of duloxetine, an inhibitor of serotonin and norepinephrine uptake carriers.     

Palladium-catalyzed asymmetric hydrogenation of functionalized ketones

[reaction: see text]. A novel catalytic system for asymmetric hydrogenation of functionalized ketones has been developed using a Pd/bisphosphine complex as the catalyst in 2,2,2-trifluoroethanol. The reaction exhibits high enantioselectivity, and up to 92.2% ee was obtained.     

Rh III- and Ir III-catalyzed asymmetric transfer hydrogenation of ketones in water

Asymmetric transfer hydrogenation (ATH) of ketones by formate in neat water is shown to be viable with Rh-TsDPEN and Ir-TsDPEN catalysts, derived in situ from [Cp*MCl2]2 (M=Rh, Ir) and TsDPEN. A variety of ketones were reduced, including nonfunctionalized aryl ketones, heteroaryl ketones, ketoesters, and unsaturated ketones. In comparison with Ir-TsDPEN and the related Ru II catalyst, the Rh III catalyst is most efficient in water, affording enantioselectivities of up to 99 % ee at substrate/catalyst (S/C) ratios of 100-1000 even without working under an inert atmosphere. The aqueous phase reduction is shown to be highly pH-dependent; the optimum pH windows for TOF greater than 50 mol mol(-1) h(-1) for Rh- and Ir-TsDPEN are 5.5-10.0 and 6.5-8.5, respectively. Outside the pH window, the reduction becomes slow or stagnant depending on the pH. However, the enantioselectivities erode only under acidic conditions. At a higher S/C ratio, the aqueous ATH by Rh-TsDPEN is shown to be product- as well as byproduct-inhibited; the product inhibition appears to stem at least partly from the reaction being reversible. The aqueous phase reduction is simple, efficient and environmentally benign, thus presenting a viable alternative for asymmetric reduction.     

Highly efficient and recyclable heterogeneous asymmetric transfer hydrogenation of ketones in water

A highly efficient heterogeneous asymmetric transfer hydrogenation of ketones in water was developed for the first time, which exhibited excellent enantioselectivities, distinct acceleration effect and remarkably high recyclabilities.     

Catalytic asymmetric transfer hydrogenation of ketones using terpene-based chiral β-amino alcohols

Catalytic asymmetric transfer hydrogenations of aromatic alkyl ketones have been studied using [RuCl₂(p-cymeme)]₂ and terpene-based β-amino alcohols. The limonene derived amino alcohol, (1S,2S,4R)-1-methyl-4-(1-methylethenyl)-2-(methylamino)cyclohexanol gave the most promising results. Chiral secondary alcohols were obtained in good to excellent yields and moderate enantioselectivities (up to 71%).     

Magnetically recoverable chiral catalysts immobilized on magnetite nanoparticles for asymmetric hydrogenation of aromatic ketones

Novel heterogenized asymmetric catalysts were synthesized by immobilizing preformed Ru catalysts on magnetite nanoparticles via the phosphonate functionality and were characterized by a variety of techniques, including TEM, magnetization, and XRD. These nanoparticle-supported chiral catalysts were used for enantioselective heterogeneous asymmetric hydrogenation of aromatic ketones with very high enantiomeric excess values of up to 98.0%. The immobilized catalysts were easily recycled by magnetic decantation and reused for up to 14 times without loss of activity and enantioselectivity. Orthogonal nature of the present catalyst immobilization approach should allow the design of other superparamagnetic nanoparticle-supported asymmetric catalysts for a wide range of organic transformations.     

Recent topics in catalytic asymmetric hydrogenation of ketones

Asymmetric hydrogenation of ketones (AHK) was revolutionized in 1987 and again in 1995 when Ru(CH₃COO)₂(binap)/HCl and RuCl₂(binap)/diamine, respectively, were developed. Since then, the number of reports on Ru-catalyzed AHK has increased exponentially, and the utility of other precious metals (Os, Rh, Ir, and Pd) has also been shown. The utilization of inexpensive base metals (Fe, Co, Ni, and Cu) has been a recent trend. This digest summarizes the key advances in AHK in the past decade by categorizing the chiral ligands into six types: (i) diphosphines, (ii) diphosphines/diamines, (iii) tridentate or tetradentate phosphine amines, (iv) diamines, (v) tetradentate amines, and (vi) tetradentate thioether amines.     

Novel chiral tetraaza ligands: synthesis and application in asymmetric transfer hydrogenation of ketones

Novel chiral tetraaza ligands, N¹,N²-bis(2-(piperidin-1-yl)benzylidene)cyclohexane-1,2-diamine 1 and N¹,N²-bis(2-(piperidin-1-yl)benzyl)cyclohexane-1,2-diamine 2, have been synthesized and fully characterized by analytical and spectroscopic methods. The structure of (R,R)-1 has been established by X-ray crystallography. Asymmetric transfer hydrogenation of aromatic ketones with the catalysts prepared in situ from [IrHCl₂(COD)]₂ and the chiral tetraaza ligands in 2-propanol gave the corresponding optically active secondary alcohols in high conversions and good ees (up to 91%) under mild reaction conditions.     

Highly efficient chiral PNNP ligand for asymmetric transfer hydrogenation of aromatic ketones in water

Chiral PNNP ligand II and [IrHCl₂(COD)]₂ were applied for the first time in the asymmetric transfer hydrogenation of aromatic ketones with HCOONa in water, giving the corresponding optical alcohols in high yield and excellent enantioselectivity (up to 99% ee). Particularly, the reduction of propiophenone proceeded smoothly at a substrate to catalyst molar ratio of 8000, without compromising the ee values obtained.     

A stereochemically well-defined rhodium(III) catalyst for asymmetric transfer hydrogenation of ketones

[reaction: see text] A rhodium(III) catalyst for asymmetric transfer hydrogenation of ketones has been designed. The incorporation of a tethering group between the diamino group and the cyclopentadienyl unit provides extra stereochemical rigidity. The catalyst is capable of enantioselective reduction of a range of ketones in excellent ee using formic acid/triethylamine as both the solvent and the reducing agent.     

Highly efficient catalysts derived from planar chiral ferrocenes for asymmetric transfer hydrogenation of ketones

Planar chiral ferrocenes 1 and its diastereoisomer 2 were found to be good lig-ands for the ruthenium catalyzed asymmetric transfer hydrogenation of ketones with i-PrOH as hydrogen source under refluxing in the presence of sodium hydroxide. The results showed that the absolute configuration of alcohol seemed to be governed by the central chirality in the oxazoline ring instead of the planar chirality. At a ratio of 1:2 for Ru:ligand, 3000:1 S/C and >100,000/h-1 TOF were observed for acetophenone. For propiophenone 99% yield and 85% e.e. were obtained     

"Tethered" Ru(II) catalysts for asymmetric transfer hydrogenation of ketones

Stereochemically well-defined ruthenium(II) catalysts have been applied to the asymmetric transfer hydrogenation of a series of ketones. In one case, statistical experimental design was employed to optimize the enantiomeric excess of the product. In the case of the TsDPEN-based systems, the replacement of trans-1,2-diphenyl substitution with cis-, or deletion of one of the phenyl groups, results in significant deterioration of the enantiomeric excess. A new method is described for the synthesis of tethered amino alcohol-containing catalysts.