Dehydrogenation of methanol by vanadium oxide and hydroxide cluster cations in the gas phase

Bare vanadium oxide and hydroxide cluster cations, V(m)O(n)+ and V(m)O(n-1) (OH)+ (m = 1-4, n = 1-10), generated by electrospray ionization, were investigated with respect to their reactivity toward methanol using mass spectrometric techniques. Several reaction channels were observed, such as abstraction of a hydrogen atom, a methyl radical, or a hydroxymethyl radical, elimination of methane, and adduct formation. Moreover, dehydrogenation of methanol to generate formaldehyde was found to occur via four different pathways. Formaldehyde was released as a free molecule either upon transfer of two hydrogen atoms to the cluster or upon transfer of an oxygen atom from the cluster to the neutral alcohol concomitant with elimination of water. Further, formaldehyde was attached to V(m)O(n)+ upon loss of H2 or neutral water to produce the cation V(m)O(n)(OCH(2))+ or V(m)O(n-1) (OCH(2))+, respectively. A reactivity screening revealed that only high-valent vanadium oxide clusters are reactive with respect to H2 uptake, oxygen transfer, and elimination of H2O, whereas smaller and low-valent cluster cations are capable of dehydrogenating methanol via elimination of H2. For comparison, the reactivity of methanol with the corresponding hydroxide cluster ions, V(m)O(n-1) (OH)+, was studied also, for which dominant pathways lead to both condensation and association products, i.e., generation of the ions V(m)O(n-1) (OCH(3))+ and V(m)O(n-1) (OH)(CH(3)OH)+, respectively.     

Structure and reactivity of V(2)O(5): bulk solid, nanosized clusters, species supported on silica and alumina, cluster cations and anions

Vanadyl bond dissociation energies are calculated by density functional theory (DFT). While the hybrid (B3LYP) functional results are close to the available reference data, gradient corrected functionals (BP86, PBE) yield large errors (about 50 to 100 kJ mol(-1)), but reproduce trends correctly. PBE calculations on a V(20)O(62)H(24) cluster model for the (001) surface of V(2)O(5) crystals virtually reproduce periodic slab calculations. The low bond dissociation energy (formation of oxygen surface defect) of 113 kJ mol(-1)(B3LYP) is due to substantial structure relaxations leading to formation of V-O-V bonds between the V(2)O(5) layers of the crystal. This relaxation cannot occur in polyhedral (V(2)O(5))(n) clusters and also not for V(2)O(5) species supported on silica or alumina (represented by cage-type models) for which bond dissociation energies of 250-300 kJ mol(-1) are calculated. The OV(OCH(3))(3) molecule and its dimer are also considered. Radical cations V(2)O(5)(+) and V(4)O(10)(+) have very low bond dissociation energies (22 and 14 kJ mol(-1), respectively), while the corresponding radical anions have higher dissociation energies (about 330 kJ mol(-1)) than the neutral clusters. The bond dissociation energies of the closed shell V(3)O(7)(+) cation (165 kJ mol(-1)) and the closed shell V(3)O(8)(-) anion (283 kJ mol(-1)) are closest to the values of the neutral clusters. This makes them suitable for gas phase studies which aim at comparisons with V(2)O(5) species on supporting oxides.     

Temperature-programmed desorption study of the selective oxidation of alcohols on silica-supported vanadium oxide

The partial oxidation of methanol and ethanol on silica-supported vanadium oxide catalysts was studied using temperature-programmed desorption (TPD), Raman spectroscopy, and diffuse reflectance infrared spectroscopy (DRIFTS). Methanol TPD results for V2O5/SiO2 samples as a function of vanadia loading in conjunction with X-ray diffraction data and Raman spectra indicated that dispersed vanadia on silica agglomerates into vanadia crystallites during a CH3OH TPD experiment. For ethanol-dosed samples, agglomeration of the dispersed vanadia was less severe, and it was possible to measure the activation energy for the dehydrogenation of adsorbed ethoxides to produce CH3CHO. Assuming a preexponential factor of 10(13) s(-1), the activation energy for this reaction was estimated to be 132 kJ/mol. The results of this study further demonstrate that there is a relatively weak interaction between vanadia and silica and suggest that adsorbed methoxide species help facilitate agglomeration of dispersed vanadia.     

Preparation and characterization of vanadium(IV) oxide supported on SBA-15 and its catalytic performance in benzene hydroxylation to phenol using molecular oxygen

Preparation of dispersed transition metal oxides catalyst with low oxidation state still remains a challenging task in heterogeneous catalysis.In this study,vanadium oxides supported on zeolite SBA-15 have been prepared under hydrothermal condition using V 2 O 5 and oxalic acid as sources of vanadium and reductant,respectively.The structures of samples,especially the oxidation state of vanadium,and the surface distribution of vanadium oxide species,have been thoroughly characterized using various techniques,including N 2-physisorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),UV-visible spectra(UV-Vis) and UV-visible-near infrared spectra(UV-Vis-NIR).It is found that the majority of supported vanadium was in the form of vanadium(IV) oxide species with the low valence of vanadium.By adjusting hydrothermal treatment time,the surface distribution of vanadium(IV) oxide species can be tuned from vanadium(IV) oxide cluster to crystallites.These materials have been tested in the hydroxylation of benzene to phenol in liquid-phase with molecular oxygen in the absence of reductant.The catalyst exhibits high selectivity for phenol(61%) at benzene conversion of 4.6%,which is a relatively good result in comparison with other studies employing molecular oxygen as the oxidant.     

D301大孔树脂吸附钒(V)的性能研究

研究了D301大孔树脂对钒的吸附性能.结果表明,pH值对D301树脂吸附钒的影响很大,与钒在溶液中的赋存状态有关,且在pH=2时吸附效果最好:测得吸附热力学参数分别为:△H=8.97kJ/mol,△G_(313)=-5.69kJ/mol,△G_(303)=-5.2kJ/mol,△G_(293)=-4.9kJ/mol,△S=46.84J/mol·K.等温吸附服从Freundlich经验式;考察了溶液浓度、搅拌速率对交换过程的影响,并对实验数据运用相关理论模型进行拟合,结果显示钒(V)在D301树脂上吸附交换过程控制步骤为颗粒扩散控制,反应级数n为0.2391.     

V2O5/TiO2-ZrO2催化剂上甲醇选择氧化制甲缩醛

采用共沉淀法制备TiO2-ZrO2复合氧化物载体、等体积浸渍法制备V2O5/TiO2-ZrO2催化剂,对催化剂在温和条件下甲醇选择氧化生成甲缩醛(DMM)反应进行研究.结果表明,与单一氧化物载体TiO2或ZrO2负载的钒基催化剂相比,V2O5/TiO2-ZrO2对甲醇选择氧化具有较好的催化性能.XRD、NH3-TPD和...     

Gas-phase infrared photodissociation spectroscopy of tetravanadiumoxo and oxo-methoxo cluster anions.

The infrared spectra of the binary vanadium oxide cluster anions V(4)O(9)(-) and V(4)O(10)(-) and of the related methoxo clusters V(4)O(9)(OCH(3))(-) and V(4)O(8)(OCH(3))(2)(-) are recorded in the gas phase by photodissociation of the mass-selected ions using an infrared laser. For the oxide clusters V(4)O(9)(-) and V(4)O(10)(-), the bands of the terminal vanadyl oxygen atoms, nu(V-O(t)), and of the bridging oxygen atoms, nu(V-O(b)-V), are identified clearly. The clusters in which one or two of the oxo groups are replaced by methoxo ligands show additional absorptions which are assigned to the C-O stretch, nu(C-O). Density functional calculations are used as a complement for the experimental studies and the interpretation of the infrared spectra. The results depend in an unusual way on the functional employed (BLYP versus B3LYP), which is due to the presence of both V-O(CH(3)) single and V=O double bonds as terminal bonds and to the strong multireference character of the latter.     

N,N-二甲基羟基胺与V(Ⅴ)氧化还原反应动力学及机理研究

二甲基羟胺;反应机理;N;N-二甲基羟基胺与V(Ⅴ)氧化还原反应动力学及机理研究     

Vanadium oxides on aluminum oxide supports. 1. Surface termination and reducibility of vanadia films on alpha-Al2O3(0001)

Using density functional theory and statistical thermodynamics, we obtained the phase diagram of thin VnOm films of varying thickness (approximately 2-6 A, 1-6 vanadium layers) supported on alpha-Al2O3(0001). Depending on the temperature, oxygen pressure, and vanadium concentration, films with different thickness and termination may form. In ultrahigh vacuum (UHV), at room temperature and for low vanadium concentrations, an ultrathin (1 x 1) O=V-terminated film is most stable. As more vanadium is supplied, the thickest possible films form. Their structures and terminations correspond to previous findings for the (0001) surface of bulk V2O3 [Kresse et al., Surf. Sci. 2004, 555, 118]. The presence of surface vanadyl (O=V) groups is a prevalent feature. They are stable up to at least 800 K in UHV. Vanadyl oxygen atoms induce a V(2p) core-level shift of about 2 eV on the surface V atoms. The reducibility of the supported films is characterized by the energy of oxygen defect formation. For the stable structures, the results vary between 4.11 and 3.59 eV per 1/2O2. In contrast, oxygen removal from the V2O5(001) surface is much easier (1.93 eV). This provides a possible explanation for the lower catalytic activity of vanadium oxides supported on alumina compared to that of crystalline vanadia particles.     

SBA-15介孔分子筛担载的钒基氧化物催化剂对乙烷选择氧化性能

用等体积浸渍法制备了SBA-15担载的钒基(V/SBA-15)和钾修饰的钒基氧化物(K-V/SBA-15)催化剂, 使用氮气吸附、小角X射线衍射(XRD)、紫外-可见漫反射光谱(UV-Vis DRS)和紫外激光拉曼光谱对这些催化剂的结构进行表征, 并评价了这些催化剂对乙烷选择氧化的活性与选择性. 实验结果表明介孔结构SBA-15对乙烷选择氧化的活性优于常规的SiO2; 对于SBA-15担载的V/SBA-15和K-V/SBA-15催化剂, 极低钒担载量(nV:nSi≤0.1:100)时隔离的四配位钒氧化物是乙烷选择氧化生成醛类化合物的活性物种, 高钒担载量(nV:nSi≥2.5:100)时聚合的和微晶态的钒氧化物是乙烷氧化脱氢或深度氧化的活性物种.     

Steady-state photocatalytic epoxidation of propene by O2 over V2O5SiO2 photocatalysts

A silica-supported, lowly loaded vanadium oxide (V2O5/SiO2) photocatalyst promotes the photocatalytic epoxidation of propene with O2 at steady state in a flow reactor system. Very little deep oxidation of propene into CO2 takes place over V2O5/SiO2, in contrast to the results obtained over a TiO2 photocatalyst in which total oxidation is the main path. With each loading, the sums of the selectivities into propene oxide (PO) and propanal (PA) at steady state were almost the same. The monomeric VO4 tetrahedral species dispersed on SiO2 yield PO under UV irradiation. The less dispersed vanadium oxide species on SiO2 promote the isomerization of PO into PA. We utilized a flow reactor system in which the short contact time reduced the isomerization and resultant decomposition of PO over the catalyst surface.     

丙烷在负载型V2O5/Zr3(PO4)4催化剂上的氧化脱氢

制备了无定型的磷酸锆Ｚｒ３（ＰＯ４）４载体,采用浸渍法在载体上负载０６％～６０％的Ｖ２Ｏ５．所制备的催化剂在丙烷氧化脱氢反应中具有较好的催化性能,如３０％Ｖ２Ｏ５／Ｚｒ３（ＰＯ４）４催化剂在丙烷转化率为１７０％时,丙烯选择性可达５３８％,丙烯收率达９１％．考察了不同反应条件下催化剂的性能．ＸＲＤ、ＩＲ和Ｒａｍａｎ光谱表明,Ｖ２Ｏ５在Ｚｒ３（ＰＯ４）４载体上主要是以高度分散的钒氧物种存在;ＥＳＲ分析结果证明催化剂中存在Ｖ４＋物种,表明Ｖ５＋／Ｖ４＋参与了氧化还原反应．     

VOx/SBA-15催化剂上甲苯气相部分氧化

采用等体积浸渍法制备了不同负载量的VOx/SBA-15催化剂。UV-Vis和H2-TPR等表征结果表明,在较低钒负载量下,钒物种的分散程度较高,主要以孤立的VO4 3－以及少量聚合体V－O－V形式存在;钒负载量较高时会有大量的聚合体V－O－V甚至晶相V2O5出现,而且,催化剂的酸性随着钒物种的高度分散而降低。甲苯气相部分氧化反应结果表明,随着钒负载量的提高,苯甲醛的选择性先升后降,CO、CO2等选择性逐渐提高。这是由于催化剂存在大量的聚合体V－O－V和晶相V2O5时,聚集态钒物种表面较多的酸量促使苯甲醛深度氧化。在相同钒负载量下,催化剂VOx/SBA-15的钒物种分散状态优于VOx/MCM-41和VOx/SiO2,从而使得催化剂VOx/SBA-15呈现较高的苯甲醛选择性。     

CO2和CH3OH直接合成碳酸二甲酯Cu-Ni/V2O5-SiO2催化剂

采用表面反应改性法制备了V2O5 SiO2(VSiO)表面复合物 ,用等体积浸渍法制备了VSiO担载的Cu Ni双金属催化剂 ,用IR、TPD、TPSR和微反技术研究了CO2 和CH3OH在催化剂表面上的化学吸附与反应性能.结果表明,在Cu Ni/VSiO催化剂上存在着金属位Cu Ni合金、Lewis酸位Vn 和Lewis碱位V=O三类活性中心 ;CO2 在金属位和Lewis酸位协同作用下可生成CO2卧式吸附态M -(CO) -O→Vn ,此吸附态在138℃左右可解离成M -CO和V=O ;CH3OH在Lewis酸位和Lewis碱位协同作用下可形成解离吸附态V -OCH3和V -OH ;CO2 和CH3OH在Cu Ni/VSiO催化剂表面上的反应产物主要为碳酸二甲酯(DMC)、CH2O、CO和H2O ,其生成DMC的选择性在85%以上.     

Determination of the chemical nature of active surface sites present on bulk mixed metal oxide catalysts

CH3OH temperature programmed surface reaction (TPSR) spectroscopy was employed to determine the chemical nature of active surface sites for bulk mixed metal oxide catalysts. The CH3OH-TPSR spectra peak temperature, Tp, for model supported metal oxides and bulk, pure metal oxides was found to be sensitive to the specific surface metal oxide as well as its oxidation state. The catalytic activity of the surface metal oxide sites was found to decrease upon reduction of these sites and the most active surface sites were the fully oxidized surface cations. The surface V5+ sites were found to be more active than the surface Mo6+ sites, which in turn were significantly more active than the surface Nb5+ and Te4+ sites. Furthermore, the reaction products formed also reflected the chemical nature of surface active sites. Surface redox sites are able to liberate oxygen and yield H2CO, while surface acidic sites are not able to liberate oxygen, contain either H+ or oxygen vacancies, and produce CH3OCH3. Surface V5+, Mo6+, and Te4+ sites behave as redox sites, and surface Nb5+ sites are Lewis acid sites. This experimental information was used to determine the chemical nature of the different surface cations in bulk Mo-V-Te-Nb-Ox mixed oxide catalysts (Mo(0.6)V(1.5)Ox, Mo(1.0)V(0.5)Te(0.16)Ox, Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox). The bulk Mo(0.6)V(1.5)Ox and Mo(1.0)V(0.5)Te(0.16)Ox mixed oxide catalytic characteristics were dominated by the catalytic properties of the surface V5+ redox sites. The surface enrichment of these bulk mixed oxide by surface V5+ is related to its high mobility, V5+ possesses the lowest Tammann temperature among the different oxide cations, and the lower surface free energy associated with the surface termination of V=O bonds. The quaternary bulk Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox mixed oxide possessed both surface redox and acidic sites. The surface redox sites reflect the characteristics of surface V5+ and the surface acidic sites reflect the properties normally associated with supported Mo6+. The major roles of Nb5+ and Te4+ appear to be that of ligand promoters for the more active surface V and Mo sites. These reactivity trends for CH3OH ODH parallel the reactivity trends of propane ODH because of their similar rate-determining step involving cleavage of a C-H bond. This novel CH3OH-TPSR spectroscopic method is a universal method that has also been successfully applied to other bulk mixed metal oxide systems to determine the chemical nature of the active surface sites.     

Atomic XAFS as a tool to probe the reactivity of metal oxide catalysts: quantifying metal oxide support effects

The potential of atomic XAFS (AXAFS) to directly probe the catalytic performances of a set of supported metal oxide catalysts has been explored for the first time. For this purpose, a series of 1 wt % supported vanadium oxide catalysts have been prepared differing in their oxidic support material (SiO2, Al2O3, Nb2O5, and ZrO2). Previous characterization results have shown that these catalysts contain the same molecular structure on all supports, i.e., a monomeric VO4 species. It was found that the catalytic activity for the selective oxidation of methanol to formaldehyde and the oxidative dehydrogenation of propane to propene increases in the order SiO2 < Al2O3 < Nb2O5 < ZrO2. The opposite trend was observed for the dehydrogenation of propane to propene in the absence of oxygen. Interestingly, the intensity of the Fourier transform AXAFS peak decreases in the same order. This can be interpreted by an increase in the binding energy of the vanadium valence orbitals when the ionicity of the support (increasing electron charge on the support oxygen atoms) increases. Moreover, detailed EXAFS analysis shows a systematic decrease of the V-Ob(-M(support)) and an increase of a the V-O(H) bond length, when going from SiO2 to ZrO2. This implies a more reactive OH group for ZrO2, in line with the catalytic data. These results show that the electronic structure and consequently the catalytic behavior of the VO4 cluster depend on the ionicity of the support oxide. These results demonstrate that AXAFS spectroscopy can be used to understand and predict the catalytic performances of supported metal oxide catalysts. Furthermore, it enables the user to gather quantitative insight in metal oxide support interactions.     

Photocatalytic oxidation of propylene with molecular oxygen over highly dispersed titanium, vanadium, and chromium oxides on silica

Photocatalytic oxidation of propylene with molecular oxygen at room temperature was investigated over various silica-supported metal oxides with low loading. The photocatalytic active site is assumed to be the isolated tetrahedrally coordinated metal oxides in the ligand-to-metal charge-transferred state, such as (Mdelta- -OLdelta+). Photocatalytic epoxidation of propylene into propylene oxide was promoted over silica-supported V and Ti oxides at steady state. Over silica-supported Cr oxide, the propylene oxide formation rate was remarkably decreased with the time course in the reaction. The oxidation state and the coordination environment of the supported Ti, V, and Cr oxide species were determined by diffuse reflectance UV-vis spectroscopy (DRS) and electron spin resonance (ESR). During the photocatalytic oxidation, the oxidation state of the Ti4+ species was not varied. On the other hand, the V5+ species was partially reduced to V4+ and the Cr6+ species was successively reduced to Cr5+ and Cr3+. An isotopic tracer study of the C3H6-18O2 reaction suggests the difference of the active oxygen species between TiO2/SiO2 and V2O5/SiO2. The active oxygen species on TiO2/SiO2 is derived from molecular oxygen. On the other hand, the photogenerated products on V2O5/SiO2 incorporate the lattice oxygen of the surface metal oxide species. It is suggested that the kinds of terminal ligand (hydroxyl or oxo) of the tetrahedrally coordinated metal oxides on silica decide the active oxygen species in the photocatalytic oxidation. A photoinduced hole center on the monohydroxyl (SiO)3Ti-OH species activates molecular oxygen that reacts with propylene. In the case of the monooxo (SiO)3V=O and dioxo (SiO)2Cr=O2 species, the photoactivated lattice oxygen (OL-) directly reacts with propylene.     

Molecular structure of a supported VO4 cluster and its interfacial geometry as a function of the SiO2, Nb2O5, and ZrO2 support

The influence of the support oxide on the molecular structure of a VO(4) cluster and its interfacial geometry has been determined for SiO(2), Nb(2)O(5), and ZrO(2) as supports. Raman, IR, UV-vis-NIR diffuse reflectance, electron spin resonance, and extended X-ray absorption fine structure (EXAFS) spectroscopies were used to characterize the supported vanadium oxide clusters after dehydration. It has been found that for all supports under investigation the vanadium ion is tetrahedral coordinated and consists of one V=O and three V-O bonds. For a VO(4)/SiO(2) catalyst it has been established that only one O neighbor is shared with the SiO(2) support via a V-O(b)-Si(support) bond with an angle of approximately 101 degrees (+/-0.5 degrees ) and a V...Si distance of 2.61 A. The absence of a second vanadium atom in the vicinity of the vanadium oxide cluster further subverts the classical assignment of the 920 cm(-1) Raman band to a V-O-V related vibration. The EXAFS results combined with structural modeling using Cerius(2) software lead to structural constraints, which imply a similar V-O(b)-M(support) interaction for Nb(2)O(5) and ZrO(2) as well. The V-O(b) and the V...M(support) distances depend on the geometry of each support surface. The results show that the classical model with three V-O(b)-M(support) bonds could not be experimentally observed with EXAFS under the applied measuring conditions. Additional experiments with IR and Raman spectroscopy under experimental conditions mimicking those of the EXAFS measurements reveal the presence of V-OH groups, giving further support for the presence of a O=V(OH)(2)-O(b)-M moiety at the support surface.     

A new dinuclear vanadium(V)-citrate complex from aqueous solutions. Synthetic,structural, spectroscopic,and pH-dependent studies in relevance to aqueous vanadium(V)-citrate speciation

Vanadium interactions with low molecular mass binders in biological fluids entail the existence of vanadium species with variable chemical and biological properties. In the course of efforts to elucidate the chemistry related to such interactions, we have explored the oxidative chemistry of vanadium(III) with the physiologically relevant tricarboxylic citric acid. Aqueous reactions involving VCl(3) and anhydrous citric acid, at pH approximately 7, resulted in blue solutions. Investigation into the nature of the species arising in those solutions revealed, through UV/visible and EPR spectroscopies, oxidation of vanadium(III) to vanadium(IV). Further addition of H(2)O(2) resulted in the oxidation of vanadium(IV) to vanadium(V), and the isolation of a new vanadium(V)-citrate complex in the form of its potassium salt. Analogous reactions with K(4)[V(2)O(2)(C(6)H(4)O(7))(2)].6H(2)O and H(2)O(2) or V(2)O(5) and citrate at pH approximately 5.5 afforded the same material. Elemental analysis pointed to the molecular formulation K(4)[V(2)O(4)(C(6)H(5)O(7))(2)].5.6H(2)O (1). Complex 1 was further characterized by FT-IR and X-ray crystallography. 1 crystallizes in the triclinic space group P(-)1, with a = 11.093(4) A, b = 9.186(3) A, c = 15.503(5) A, alpha = 78.60(1) degrees, beta = 86.16(1) degrees, gamma = 69.87(1) degrees, V = 1454.0(8) A(3), and Z = 2. The X-ray structure of 1 reveals the presence of a dinuclear vanadium(V)-citrate complex containing a V(V)(2)O(2) core. The citrate ligands are triply deprotonated, and as such they bind to vanadium(V) ions, thus generating a distorted trigonal bipyramidal geometry. Binding occurs through the central alkoxide and carboxylate groups, with the remaining two terminal carboxylates being uncoordinated. One of those carboxylates is protonated and contributes to hydrogen bond formation with the deprotonated terminal carboxylate of an adjacent molecule. Therefore, an extended network of hydrogen-bonded V(V)(2)O(2)-core-containing dimers is created in the lattice of 1. pH-dependent transformations of 1 in aqueous media suggest its involvement in a web of vanadium(V)-citrate dinuclear species, consistent with past solution speciation studies investigating biologically relevant forms of vanadium.     

Density functional theory study of small vanadium oxide clusters

Density functional theory is employed to study structure and stability of small neutral vanadium oxide clusters in the gas phase. BPW91/LANL2DZ level of theory is used to obtain structures of VOy (y=1-5), V2Oy (y=2-7), V3Oy (y=4-9), and V4Oy (y=7-12) clusters. Enthalpies of growth and fragmentation reactions of the lowest energy isomers of vanadium oxide molecules are also obtained to study the stability of neutral vanadium oxide species under oxygen saturated gas-phase conditions. Our results suggest that cyclic and cage-like structures are preferred for the lowest energy isomers of neutral vanadium oxide clusters, and oxygen-oxygen bonds are present for oxygen-rich clusters. Clusters with an odd number of vanadium atoms tend to have low spin ground states, while clusters with even number of vanadium atoms have a variety of spin multiplicities for their ground electronic state. VO2, V2O5, V3O7, and V4O10 are predicted to be the most stable neutral clusters under the oxygen saturated conditions. These results are in agreement with and complement previous gas-phase experimental studies of neutral vanadium oxide clusters.