New Spectrophotmetric Methods for Determination of Cephapirine Na

Three sensitive and accurate spectrophotometric procedures were developed for the analysis of cephapirine sodium in pure form and in its pharmaceutical formulation. Method A: A kinetic method based on the observation that in acidic medium cephapirine reduces sodium molybdate to molybdenum blue, the absorbance of which is proportional to the amount of antibiotic present at a fixed time of 40 minutes; the formed product was spectrophotometrically measured at 780 nm. The concentration of drug calculated using its calibration by fixed concentration and rate constant methods is feasible with the calibration equations obtained, but the fixed time method proved to be more applicable. Method B is based on chetale formation with palladium(II) chloride in buffered medium as the interaction between metal ions and ligand anions or moleules capable of the formation of complexes which results in the development of colors suitable for the characterization of quantitative determination of metal or ligand. Metals containing easily excited d or f electrons were suitable for the formation of colored complexes. Method C, is based on the formation of colored complex between palladium(II), eosin and cephapirine Na. Sodium lauryl sulphate is used as surfactant to increase the solubility and intensity of the formed complex. Under optimum conditions, the complexes showed maximum absorption at Δ370 and Δ550 for methods B and C, respectively. Apparent molar absorpitivities were 5.2 × 10³, 5.5 × 10³, 1.4 × 10⁴; Sandell's sensitivities were 1.17 × 10^?3, 1.24 × 10^?3, 3.1 × 10^?3, for methods A, B and C, respectively. The solution of the products obeyed Beer's Law in the concentration ranges 10–70, 20–70, 2–48, μg mL^?1 for methods A, B, and C. The proposed methods were applied to the determination of the drug in pure or pharmaceutical preparations. The results obtained were compared statistically with those given by the official method.     

Development and Validation of Kinetic Spectrophotometric Method for the Determination of Losartan Potassium in Pure and Commercial Tablets

A validated kinetic spectrophotometric method has been developed for the determination of losartan potassium in pure and dosage forms. The method is based on oxidation of the losartan potassium with alkaline potassium permanganate at room temperature (25 ± 1 °C). The reaction is followed spectrophotometrically by measuring the increase in absorbance with time at 603 nm, and the initial rate, fixed time (at 12.0 min) and equilibrium time (at 90.0 min) methods are adopted for constructing the calibration graphs. All the calibration graphs are linear in the concentration range of 7.5–60.0 μg mL^?1 and the calibration data resulted in the linear regression equations of n? = ?6.422 × 10^?7 + 1.173 × 10^?5 C, A =3.30 × 10^?4 + 5.28 × 10^?3 C and A = ?2.09 × 10^?2 + 1.05 × 10^?1 C for initial‐rate, fixed time and equilibrium time methods, respectively. The limits of detection for initial rate, fixed time and equilibrium time methods are 0.71, 0.21 and 0.19 μg mL^?1, respectively. The activation parameters such as E_a, ΔH^?, ΔS^?, and ΔG^? are also determined for the reaction and found to be 87.34 KJ mol^?1, 84.86 KJ mol^?1, 50.96 JK^?1 mol^?1 and ?15.10 KJ mol^?1, respectively. The variables are optimized and the proposed methods are validated as per ICH guidelines. The method has been applied successfully to the estimation of losartan potassium in commercial tablets. The performance of the proposed methods was judged by calculating paired t‐ and F‐ values. The analytical results of the proposed methods when compared with those of the reference method show no significant difference in accuracy and precision and have acceptable bias.     

Validated Voltammetric Method for the Simultaneous Determination of Anti‐diabetic Drugs,Linagliptin and Empagliflozin in Bulk,Pharmaceutical Dosage Forms and Biological Fluids

A cobalt oxide nanoparticles (Co₃O₄NPs) and multi walled carbon nanotubes (MWCNTs) modified carbon paste electrodes were used to study the electrochemical behavior of linagliptin and empagliflozin in Britton Robinson buffer solution of pH 8.0 using cyclic and square wave voltammetry. The above mentioned modified electrodes showed highly sensitive sensing and gave an excellent anodic response for both drugs. The peak current varied linearly over the concentration ranges: 3.98×10^?5–1.53×10^?3 mol L^?1 (18.82–723.00 μg/mL) and 7.94×10^?6–1.07×10^?4 mol L^?1 (3.65–48.25 μg/mL) with determination coefficients of 0.9999 and 0.9998 for linagliptin and empagliflozin, respectively. The recoveries and relative standard deviations were found in the following ranges: 98.80 %–102.00 % and 0.23 %–1.90 % for linagliptin and 98.30 %–101.80 % and 0.11 %–1.86 % for empagliflozin. The detection and quantification limits were 1.13×10^?5 and 3.76×10^?5 mol L^?1 (5.34and17.77 μg/mL) for linagliptin, 1.71×10^?6and 5.68×10^?6 mol L^?1 (0.77 and 2.56 μg/mL) for empagliflozin. The proposed sensors have been successfully applied for the determination of the drugs in bulk, pharmaceutical formulations and biological fluids.     

Kinetic Spectrophotometric Determination of Metoprolol Tartrate in Commercial Dosage Forms

A kinetic spectrophotometric method has been described for the determination of metoprolol tartrate in commercial dosage forms. The procedure is based on the reaction of the drug with 1‐chloro‐2, 4‐dinitrobenzene (CDNB) in dimethylsulfoxide (DMSO) at 100 ± 1 °C. The reaction is investigated by measuring the change in absorbance with time at 420 nm. Fixed‐time (ΔA) and equilibrium methods are chosen for obtaining the calibration curves. Both calibration curves were found to be linear over the concentration range of 5‐60 μg mL^?1. The regression analysis of calibration data resulted in the linear regression equations of ΔA = ?1.608 × 10^?4 + 3.96 × 10^?3 C and A = 7.31 × 10^?4 + 1.90 × 10^?2 C for fixed time (ΔA) and equilibrium methods, respectively. The limit of detection (LOD) for fixed time and equilibrium methods are 1.16 and 0.415 μg mL^?1, respectively. The method has been successfully applied to the quantitation of metoprolol tartrate in commercial dosage forms. Statistical comparison of the results shows that there is no significant difference between the proposed methods and El‐Ries's spectrophotometric method.     

Simultaneous Determination of Dihydroxybenzene Isomers at MWCNTs/β‐Cyclodextrin Modified Carbon Ionic Liquid Electrode in the Presence of Cetylpyridinium Bromide

Simultaneous determination of dihydroxybenzene isomers was investigated at a multi‐wall carbon nanotubes (MWCNTs)/β‐cyclodextrin composite modified carbon ionic liquid electrode in phosphate buffer solution (pH 7.0, 1/15 mol/L) in the presence of cationic surfactant cetylpyridinium bromide (CPB). With the great enhancement of surfactant CPB, the voltammetric responses of dihydroxybenzene isomers were more sensitive and selective. The oxidation peak potential of hydroquinone was about 0.024 V, catechol was about 0.140 V and resorcinol 0.520 V in differential pulse voltammetric (DPV) measurements, which indicated that the dihydroxybenzene isomers could be separated entirely. The electrode showed wide linear behaviors in the range of 1.2×10^?7–2.2×10^?3, 7.0×10^?7–1.0×10^?3, 2.6×10^?6–9.0×10^?4 mol/L for hydroquinone, catechol and resorcinol, respectively. And the detection limits of the three dihydroxybenzene isomers were 4.0×10^?8, 8.0×10^?8, 9.0×10^?7 mol/L, respectively. The proposed method could be applied to the determination of dihydroxybenzene isomers in artificial wastewater, and the recovery was from 97.4% to 104.2%.     

Ozone reduction at Nafion modified Au electrode and the measurement of ozone concentration in highly resistive solutions

The mass transport and charge transfer kinetics of ozone reduction at Nafion coated Au electrodes were studied in 0.5 mol/L H2SO4 and highly resistive solutions such as distilled water and tap water. The diffusion coefficient and partition coefficient of ozone in Nafion coating are 1.78×10-6 cm2·s-1 and 2.75 at 25℃ (based on dry state thickness), respectively. The heterogeneous rate constants and Tafel slopes for ozone reduction at bare Au are 4.1×10-6 cm·s-1, 1.0×10-6 cm·s-1 and 181 mV, 207 mV in 0.5 mol/L H2SO4 and distilled water respectively and the corresponding values for Nafion coated Au are 5.5×10-6 cm·s-1, 1.1×10-6 cm·s-1 and 182 mV, 168 mV respectively. The Au microelectrode with 3 μm Nafion coating shows good linearity over the range 0-10 mmol/L ozone in distilled water with sensitivity 61 μA·ppm-1 ·cm-2, detection limit 10 ppb and 95% response time below 5 s at 25℃. The temperature coefficient in range of 11-30℃ is 1.3%.     

Polarographic Behavior of Gemfibrozil in the Presence of Dissolved Oxygen and Its Analytical Application

The polarographic behavior of gemfibrozil is investigated in 0.2 mol L^?1 KH₂PO₄‐Na₂HPO₄ (pH 5.8±0.1)‐8% ethanol supporting electrolyte in the absence and the presence of dissolved oxygen. The results demonstrate that the polarographic reduction peak at ca. ?1.17 V is a catalytic hydrogen wave after deaeration, and the enhanced reduction peak in the presence of dissolved oxygen is the so‐called parallel catalytic hydrogen wave. Based on the parallel catalytic hydrogen wave, a novel method has been developed for the determination of gemfibrozil by single sweep polarography. Calibration plot is linear in the range of 1.8×10^?7–2.4×10^?6 mol L^?1 and detection limit is 9.0×10^?8 mol L^?1. The proposed method is applied to the direct determination of the gemfibrozil in pharmaceutical preparations. The proposed method is simpler, faster and more sensitive than the known methods for gemfibrozil analyses.     

Spectrophotometric Determination of Selected Antibiotics Using Prussian Blue Reaction

A simple, sensitive and accurate spectrophotometric method has been described for the determination of ampicillin(I), amoxicillin trihydrate(II) and cefazolin sodium(III). The procedure is based on the formation of Prussian Blue (PB) complex. The reaction between the acidic hydrolysis products of antibiotics (T = 60 °C) with mixture of Fe³⁺ and hexacyanoferrate(III) ions was evaluated for the spectrophotometric determination of the mentioned drugs. The maximum absorbance of the colored complex occurs at λ = 700 nm and the molar absorptivity is 3.0 × 10⁴ 1 mol^?1cm^?1. The effect of various parameters such as concentration of K₃Fe(CN)₆ and Fe³⁺, nature and amount of acids used, temperature and time of heating were investigated. Under optimum conditions the linear range of calibration graph was 2.0–12.0, 5.0–13.5 and 3.0–12.0 μg mL^?1 for ampicillin, amoxicillin and cefazolin, respectively. The relative standard deviation for the determination of 10 μg mL^?1 of antibiotics was about 0.5–1.5%. The proposed method was successfully applied to the determination of selected antibiotics from pharmaceutical preparations. The validity of the method was tested by the official methods and by the recovery studies of standard addition to pharmaceuticals.     

Spectrophotometric and Titrimetric Assay of Flutamide in Pharmaceuticals

Three methods, two spectrophotometric and one titrimetric, which are simple, easy to perform and cost-effective, are presented for the determination of flutamide, an anti-cancer drug. In the first spectrophotometric method (method A), absorbance of flutamide solution in methanol was measured at 290 nm. Measurement of absorbance of reduced flutamide (RFAD) in HCl at 245 nm serves as the basis of the second spectrophotometric method (method B). RFAD, in strong HCl medium was titrated vs standard sodium nitrite, determining the end-point potentiometrically (method C). Experimental variables influencing assays were studied and optimized. Beer’s law was obeyed over concentration ranges: 2.5–25.0 and 1.0–9.0 μg/mL for method A and method B, respectively, with molar absorptivity values of 1.0 × 10⁴ and 2.4 × 10⁴ L/(mol cm). Calculated limits of detection and quantification were 0.18 and 0.54 μg/mL (method A) and 0.16 and 0.18 μg/mL (method B). Titration reaction followed a 1: 1 stoichiometry and the method is applicable to 4?30 mg RFAD. Repeatability, reproducibility and accuracy of the methods were satisfactory. The methods were also validated for selectivity, robustness and ruggedness. The developed methods were applied to the determination of active ingredient in tablets, and the results agreed well with the label claim and those of a reference method. Accuracy was also assessed by recovery test via standard–addition procedure. The drug was subjected to different stress conditions, such as acid and base hydrolysis, oxidation and thermolysis and analyzed subsequently by method A, as a part of stress testing. Results indicated that the drug is slightly vulnerable to all stress-conditions studied.     

Spectrophotometric Determination of Esomeprazole Magnesium in Commercial Tablets Using 5‐Sulfosalicylic Acid and N‐Bromosuccinimide

Two simple, sensitive and economical spectrophotometric methods have been developed for the determination of esomeprazole magnesium in commercial dosage forms. Method A is based on the reaction of esomeprazole magnesium with 5‐sulfosalicylic acid in methanol to form a yellow product, which absorbs maximally at 365 nm. Method B utilizes the reaction of esomeprazole magnesium with N‐bromosuccinimide in acetone‐chloroform medium to form α‐bromo derivative of the drug peaking at 380 nm. Under the optimized experimental conditions, Beer's law is obeyed in the concentration ranges of 2‐48 and 10‐100 μg mL^?1 with molar absorptivity of 2.11 × 10⁴ and 4.57 × 10⁴L mol^?1 cm^?1 for methods A and B, respectively. The limits of detection for methods A and B are 0.35 and 0.46 μg mL^?1, respectively. No interference was observed from excipients commonly present in tablet formulations. Methods A and B are successfully applied to the commercial tablets for the estimation of esomeprazole magnesium with good accuracy and precision. The results compare favorably with the reference spectrophotometric method indicating no significant difference between the methods compared.     

Voltammetric sensing of triclosan in the presence of cetyltrimethylammonium bromide using a cathodically pretreated boron-doped diamond electrode

ABSTRACT

In the present study, a simple, cheap and sensitive electrochemical method based on a cathodically pretreated boron-doped diamond (CPT-BDD) electrode is described for the detection of triclosan with the cationic surfactant (cetyltrimethylammonium bromide, CTAB) media. The oxidation of triclosan was irreversible and exhibited an adsorption controlled process. The sensitivity of the adsorptive stripping voltammetric measurements was significantly improved with addition of CTAB. Using square-wave stripping mode, a linear response was obtained for triclosan determination in Britton-Robinson buffer solution at pH 9.0 containing 2.5 × 10^?4 M CTAB at around + 0.67 V (vs. Ag/AgCl) (after 30 s accumulation at open-circuit condition). The method could be used in the range of 0.01–1.0 μg mL^?1 (3.5 × 10^?8–3.5 × 10^?6 M), with a detection limit of 0.0023 μg mL^?1 (7.9 × 10^?9 M). The feasibility of the proposed method for the determination of triclosan in water samples was checked in spiked tap water.     

Fluorescence Enhancement of Rare Earths by Yttrium and its Application

Abstract

A study of the enhancement effect on the fluorescence intensity of the Eu³⁺–-thenoyltrifluoroacetone (TTA)–-cetyltri–-methylammonium bromide (CTMAB) and the Dy³⁺ pyrocatechol–-3,5-disulphonic acid (Tiron) systems by Y³⁺has been carried out. In the presence of yttrium the fluorescence intensity of the systems was enhanced by a factor of about 100 and 15, respectively. The fluorescence intensity was a linear function of the concentration of europium or dysprosium in the range 1.0 × 10^?10–-1.0 × 10^?8mol dm^?3 and 8.0 × 10^?8–-9.0 × 10^?6mol dm^?3, respectively. The detection limit was 1.0 × 10^?11mol dm^?3 and 1.0 × 10^?10mol dm^?3, respectively. The standard addition method was used for the determination of europium or dysprosium in rare earth oxides and gave satisfactory results. The mechanism of enhanced fluorescence was proposed.     

Determination of chlorite at very low levels by using differential pulse polarography

A method is reported for the determination of μgl^?1 levels of chlorite by using differential pulse polarography. The electrochemical reduction of chlorite was studied between pH 3.7 and 14 and in an ionic strength range of 0.05–3.0 M. The optimum conditions are pH 4.1–4.4 and an ionic strength of 0.45 M. The current under these conditions is diffusion-controlled and is a linear function of chlorite concentration ranging from 2.77×10^?7 to 2.80×10^?4 M (19 μgl^?1 to 19 mg l^?1). The imprecision is better than ±1.0% and ±3.4% at concentrations of 2.87×10^?5 M and 1.74×10^?6M, respectively, with a detection limit of 1×10^?7 M (7μgl^?1). An interference study and the application of this method for determining chlorite in drinking water are reported.     

Simultaneous Determination of Antimony and Lead in Gunshot Residue by Cathodic Adsorptive Stripping Voltammetric Methods

Differential pulse cathodic adsorptive stripping (DPCAdSV) and square wave cathodic adsorptive stripping (SWCAdSV) voltammetric methods were developed for the determination of antimony and lead in gunshot residues. Linear working ranges for DPCAdSV and SWCAdSV methods were (2.0×10^?9–5.0×10^?7) M and (2.0×10^?9–7.0×10^?7) M for antimony and 2.0×10^?9–3.0×10^?7 M (both methods) for lead. The detection of antimony limits were found to be 1.3×10^?9 M for DPCAdSV and 7.3×10^?10 M for SWCAdSV while the corresponding values for lead were 3.0×10^?9 M and 5.8×10^?10 M. Antimony and lead contents obtained by these methods in gunshot residues are in good agreement with those obtained by graphite furnace atomic absorption spectrometric method within a confidence limit of 95%.     

Amperometric Determination of Inositol Based on Electrocatalytic Oxidation on a Glass Carbon Electrode Modified by Nickel Hexacyanoferrate Films

Abstract

A novel method to determinate inositol based on the electrocatalytic oxidation of inositol on the surface of a nickel hexacyanoferrate (NiHCF)–modified electrode was reported. The determination of inositol can be performed in the range of 1.0×10^?4 to 5.8×10^?3 mol/L with a detection limit of 5.0×10^?5 mol/L.     

Quantitative determination of lansoprozole in capsules and spiked human urine by spectrophotometry through ion-pair complex formation reaction

Two simple, rapid and sensitive extraction-free spectrophotometric methods are proposed for the determination of lansoprazole (LAN) in bulk drug and in its capsule formulation. The methods are based on the interaction of LAN in dichloromethane (DCM) with acidic sulfonphthalein dyes, namely, bromocresol purple (BCP) in method A and bromothylmol blue (BTB) in method B to form stable, yellow-colored, ion-pair complexes peaking at 400 and 430 nm, respectively. The parameters that affect the reaction were carefully optimized, and under the optimized conditions, linear relationships were obtained in the ranges of 0.5–15.0 and 1.25–20.0 μg mL^?1 LAN for method A and method B, respectively. The molar absorptivity values are calculated to be 2.10 × 10⁴ and 1.50 × 10⁴ L mol^?1 cm^?1 for method A and method B, respectively. The composition of the ion-pairs was found to be 1:1 by Job’s method of continuous variations and the conditional stability constant (log K_f) of the complexes has been calculated. The proposed methods were applied successfully to the determination of LAN in capsules as well as in spiked urine sample with good accuracy and precision. The results obtained by the proposed methods were compared favorably with those of the reference method.     

Simultaneous Differential Pulse Voltammetric Determination of Ascorbic Acid and Caffeine in Pharmaceutical Formulations Using a Boron‐Doped Diamond Electrode

A cathodically pretreated boron‐doped diamond electrode was used for the simultaneous anodic determination of ascorbic acid (AA) and caffeine (CAF) by differential pulse voltammetry. Linear calibration curves (r=0.999) were obtained from 1.9×10^?5 to 2.1×10^?4 mol L^?1 for AA and from 9.7×10^?6 to 1.1×10^?4 mol L^?1 for CAF, with detection limits of 19 μmol L^?1 and 7.0 μmol L^?1, respectively. This method was successfully applied for the determination of AA and CAF in pharmaceutical formulations, with results equal to those obtained using a HPLC reference method.     

Spectrophotometric study of the reaction of titanium with bromopyrogallol red in the presence of cetylpyridinium bromide

Optimal conditions were found for the reaction of Ti(IV) with bromopyrogallol red (λ = 625 nm, pH = 2.5, c_DG = 4 × 10^?5M, c_CPB = 5 × 10^?4M) and a new method was developed for the spectrophotometric determination of titanium in the concentration range 0.05–0.5 μg ml^?1. A mechanism was proposed for the studied reaction on the basis of a kinetic study.     

Spectrophotometric Assay of Certain Aminoglycosides Using Cyanoacetamide

Abstract

A simple and sensitive ultraviolet spectrophotometric method has been devised for the determination of amikacin, kanamycin, neomycin and streptomycin in pure form and in some pharmaceutical preparations. The method depends on the nitrosation of the primary amino groups followed by reaction with cyanoacetamide in ammonia medium at 100°C for 30 min, The reaction products exhibit a characteristic absorption. maximum at 270 nm. Beer's law is obeyed within the concentration ranges 4–40 μg ml^?1 for amikacin, kanamycin and neomycin and 8–80 μg ml^?1 for streptomycin with apparent molar absorptivities of about 1.85 × 10⁴ for the first three compounds and 1.3×10⁴ 1. mole^?1.cm^?1 for streptomycin.     

Determination of Labetalol Hydrochloride in Drug Formulations by Spectrophotometry

A validated, selective and sensitive spectrophotometric method has been developed for the determination of labetalol hydrochloride in commercial dosage forms. The method is based on the coupling reaction of positive diazonium ion of 4‐aminobenzenesulfonic acid with phenolate ion of labetalol to form a colored azo compound which absorbs maximally at 395 nm. Under the optimized experimental conditions, the color is stable up to 2 h and Beer's law is obeyed in the concentration range of 0.8–17.6 μg mL^?1 with a linear regression equation of A = 4.84 × 10^?4 + 7.864 × 10^?2 C and coefficient of correlation, r = 0.9999. The molar absorptivity and Sandell's sensitivity are found to be 2.874 × 10⁴ L mol^?1 cm^?1 and 0.013 μg cm^?2 per 0.001‐absorbance unit, respectively. The limits of detection and quantitation of the proposed method are 0.08 and 0.23 μg mL^?1, respectively. The intra‐day and inter‐day precision variation and accuracy of the proposed method is acceptable with low values of standard analytical error. The recovery results obtained by the proposed method in drug formulations are acceptable with mean percent recovery ± RSD of 99.97 ± 0.52 ‐ 100.03 ± 0.63%. The results of the proposed method compared with those of Bilal's spectrophotometric method indicated excellent agreement with acceptable true bias of all samples within ± 2.0%.