MAO‐free polymerization of propylene by rac‐ Me2Si(1‐C5H2‐2‐Me‐4‐tBu)2Zr(NMe2)2 compound

Ansa‐zirconocene diamide complex rac‐Me₂Si(CMB)₂Zr(NMe₂)₂ (rac‐1, CMB = 1‐C₅H₂‐2‐Me‐4‐^tBu) reacts with AlR₃ (R = Me, Et, i‐Bu) and then with [CPh₃]⁺[B(C₆F₅)₄]⁻ (2) in toluene in order to in situ generate cationic alkylzirconium species. In the sequential NMR‐scale reactions of rac‐1 with various amount of AlMe₃ and 2, rac‐1 transforms first to rac‐Me₂Si(CMB)₂Zr(Me)(NMe₂) (rac‐3) and rac‐Me₂Si(CMB)₂ZrMe₂ (rac‐4) by the reaction with AlMe₃, and then to [rac‐Me₂Si(CMB)₂ZrMe]⁺ (5⁺) cation by the reaction of the resulting mixtures with 2. The activities of propylene polymerizations by rac‐1/Al(i‐Bu)₃/2 system are dependent on the type and concentration of AlR₃, resulting in the order of activity: rac‐1/Al(i‐Bu)₃/2 > rac‐1/AlEt₃/2 > rac‐1/MAO ≫ rac‐1/AlMe₃/2 system. The bulkier isobutyl substituents make inactive catalytic species sterically unfavorable and give rise to more separated ion pairs so that the monomers can easily access to the active sites. The dependence of the maximum rate (R_{p, max}) on polymerization temperature (T_p) obtained by rac‐1/Al(i‐Bu)₃/2 system follows Arrhenius relation, and the overall activation energy corresponds to 0.34 kcal/mol. The molecular weight (MW) of the resulting isotactic polypropylene (iPP) is not sensitive to Al(i‐Bu)₃ concentration. The analysis of regiochemical errors of iPP shows that the chain transfer to Al(i‐Bu)₃ is a minor chain termination. The 1,3‐addition of propylene monomer is the main source of regiochemical sequence and the [mr] sequence is negligible, as a result the meso pentad ([mmmm]) values of iPPs are very high ([mmmm] > 94%). These results can explain the fact that rac‐1/Al(i‐Bu)₃/2 system keeps high activity over a wide range of [Al(i‐Bu)₃]/[Zr] ratio between 32 and 3,260. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1071–1082, 1999     

Cyclopolymerization of 1,5‐hexadiene catalyzed by various stereospecific metallocene compounds

Cyclopolymerization of 1,5‐hexadiene has been carried out at various temperatures in toluene by using three different stereospecific metallocene catalysts—isospecific rac‐(EBI)Zr(NMe₂)₂ [EBI: ethylenebis(1‐indenyl), Cat 1], syndiospecific Me₂C(Cp)(Flu)ZrMe₂ (Cp = 1‐cyclopentadienyl, Flu = 1‐fluorenyl, Cat 2), and aspecific CpZrMe₂ (Cp*: pentamethylcyclopentadienyl, Cat 3) compounds in the presence of Al(i‐Bu)₃ and [Ph₃C][B(C₆F₅)₄]—in order to study the effect of polymerization temperature and catalyst stereospecificity on the property and microstructure of poly(methylene‐1,3‐cyclopentane) (PMCP). The activities of catalysts decrease in the following order: Cat 1 > Cat 2 > Cat 3. PMCPs produced by Cat 1 are not completely soluble in toluene, but those by Cat 2 and Cat 3 are soluble in toluene. trans‐Diisotactic rich PMCPs are produced by Cat 1 and Cat 2, and cis‐atactic PMCP by Cat 3. The cis/trans ratio of PMCP by Cat 1 and Cat 2 is relatively insensitive to the polymerization temperature, but that by Cat 3 is highly sensitive to the polymerization temperature. Melting temperatures of PMCP produced increase with the cis to trans ratio of rings. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1520–1527, 2000     

Higher α‐olefin polymerizations catalyzed by rac‐Me2Si(1‐C5H2‐2‐CH3‐4‐tBu)2Zr(NMe2)2/Al(iBu)3/[Ph3C][B(C6F5)4]

Polymerizations of higher α‐olefins, 1‐pentene, 1‐hexene, 1‐octene, and 1‐decene were carried out at 30 °C in toluene by using highly isospecific rac‐Me₂Si(1‐C₅H₂‐2‐CH₃‐4‐^t Bu)₂Zr(NMe₂)₂ (rac‐1) compound in the presence of Al(iBu)₃/[CPh₃][B(C₆F₅)₄] as a cocatalyst formulation. Both the bulkiness of monomer and the lateral size of polymer influenced the activity of polymerization. The larger lateral of polymer chain opens the π‐ligand of active site wide and favors the insertion of monomer, while the large size of monomer inserts itself into polymer chain more difficultly due to the steric hindrance. Highly isotactic poly(α‐olefin)s of high molecular weight (MW) were produced. The MW decreased from polypropylene to poly(1‐hexene), and then increased from poly(1‐hexene) to poly(1‐decene). The isotacticity (as [mm] triad) of the polymer decreased with the increased lateral size in the order: poly(1‐pentene) > poly(1‐hexene) > poly(1‐octene) > poly(1‐decene). The similar dependence of the lateral size on the melting point of polymer was recorded by differential scanning calorimetry (DSC). ¹H NMR analysis showed that vinylidene group resulting from β‐H elimination and saturated methyl groups resulting from chain transfer to cocatalyst are the main end groups of polymer chain. The vinylidene and internal double bonds are also identified by Raman spectroscopy. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1687–1697, 2000     

Copolymerization of propene and 1-hexene using metallocene amide compounds

Copolymerization of propene and 1-hexene has been carried out at 30°C in toluene under atmospheric pressure by using three isospecific metallocene amide compounds, rac-(EBI)Zr(NMe₂₎₂ (EBI = ethylenebis(1-indenyl), rac- 1 ), rac-(EBI)Zr(NC₄H₈₎₂ (rac- 2 ), and rac-Me₂Si(1-C₅H₂-2-Me-4-t-Bu)₂Zr(NMe₂₎₂ (rac- 3 ), in the presence of methylaluminoxane (MAO) or [Ph₃C][B(C₆F₅)₄]. The rate enhancements in the presence of 1-hexene were recorded as a function of the catalytic systems. The incorporation of 1-hexene decreases in the following order: rac- 2 /MAO > rac- 3 /Al(i-Bu)₃/[Ph₃C][B(C₆F₅)₄] > rac- 1 /MAO. All copolymers investigated in this study have a nearly random sequence distribution.     

The effect of AlR3 on propylene polymerization by rac‐(EBI)Zr(NMe2)2/AlR3/[CPh3][B(C6F5)4] catalyst

Ansa‐zirconocene diamide complex rac‐(EBI)Zr(NMe₂)₂ [rac‐1, EBI = ethylene‐1,2‐bis(1‐indenyl)] reacted with AlR₃ (R = Me, Et, iBu) or Al(iBu₂)H and then with [CPh₃][B(C₆F₅)₄] (2) in toluene in order to perform propylene polymerization by cationic alkylzirconium species, which are in situ generated during polymerization. Through the sequential NMR‐scale reactions of rac‐1 with AlR₃ or Al(iBu₂)H and then with 2, rac‐1 was demonstrated to be transformed to the active alkyzirconium cations via alkylated intermediates of rac‐1. The cationic species generated by using AlMe₃, AlEt₃, and Al(iBu₂)H as alkylating reagents tend to become heterodinuclear complex; however, those by using bulky Al(iBu)₃ become base‐free [rac‐(EBI)Zr(iBu)]⁺ cations. The activity of propylene polymerization by rac‐1/AlR₃/2 catalyst was deeply influenced by various parameters such as the amount and the type of AlR₃, metallocene concentration, [Al]/[2] ratio, and polymerization temperature. Generally the catalytic systems using bulky alkylaluminum like Al(iBu)₃ and Al(iBu)₂H show higher activity but lower stereoregularity than those using less bulky AlMe₃ and AlEt₃. The alkylating reagent Al(iBu)₃ is not a transfer agent as good as AlMe₃ or AlEt₃. The polymerization activities show maximum around [Al]/[2] ratio of 1.0 and increase monotonously with polymerization temperature. The overall activation energy of both rac‐1/Al(iBu)₃/2 and rac‐1/Al(iBu)₂H catalysts is 6.0 kcal/mol. As the polymerization temperature increases, the stereoregularity of the resulting polymer decreases markedly, which is demonstrated by the decrease of [mmmm] pentad value and by the increase of the amount of polymer soluble in low boiling solvent. The physical properties of polymers produced in this study were investigated by using ¹³C‐NMR, differential scanning calorimetry (DSC), viscometry, and gel permeation chromatography (GPC). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1523–1539, 1999     

Kinetics of propylene polymerization initiated by rac‐Me2Si(1‐C5H2‐2‐Me‐4‐tBu)2Zr(NME2)2/MAO catalyst

The kinetics of propylene polymerization initiated by ansa‐metallocene diamide compound rac‐Me₂Si(CMB)₂Zr(NMe₂)₂ (rac‐1, CMB = 1‐C₅H₂‐2‐Me‐4‐^tBu)/methylaluminoxane (MAO) catalyst were investigated. The formation of cationic active species has been studied by the sequential NMR‐scale reactions of rac‐1 with MAO. The rac‐1 is first transformed to rac‐Me₂Si(CMB)₂ZrMe₂ (rac‐2) through the alkylation mainly by free AlMe₃ contained in MAO. The methylzirconium cations are then formed by the reaction of rac‐2 and MAO. Small amount of MAO ([Al]/[Zr] = 40) is enough to completely activate rac‐1 to afford methylzirconium cations that can polymerize propylene. In the lab‐scale polymerizations carried out at 30°C in toluene, the rate of polymerization (R_p) shows maximum at [Al]/[Zr] = 6,250. The R_p increases as the polymerization temperature (T_p) increases in the range of T_p between 10 and 70°C and as the catalyst concentration increases in the range between 21.9 and 109.6 μM. The activation energies evaluated by simple kinetic scheme are 4.7 kcal/mol during the acceleration period of polymerization and 12.2 kcal/mol for an overall reaction. The introduction of additional free AlMe₃ before activating rac‐1 with MAO during polymerization deeply influences the polymerization behavior. The iPPs obtained at various conditions are characterized by high melting point (approximately 155°C), high stereoregularity (almost 100% [mmmm] pentad), low molecular weight (MW), and narrow molecular weight distribution (below 2.0). The fractionation results by various solvents show that iPPs produced at T_p below 30°C are compositionally homogeneous, but those obtained at T_p above 40°C are separated into many fractions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 737–750, 1999     

A non‐PFT (polymerization filling technique) approach to poly(ethylene‐co‐norbornene)/MWNTs nanocomposites by in situ copolymerization with scandium half‐sandwich catalyst

The in situ synthesis of ethylene‐co‐norbornene copolymers/multi‐walled carbon nanotubes (MWNTs) nanocomposites was achieved by rare‐earth half‐sandwich scandium precursor [Sc(η⁵‐C₅Me₄SiMe₃)(η¹‐CH₂SiMe₃)₂(THF)] (1) activated by [Ph₃C][B(C₆F₅)₄], through a non‐PFT (Polymerization Filling Technique) approach. MWNTs nanocomposites with low aluminum residue were obtained with excellent yields even though small amounts of triisobutylaluminium were needed as scavenger to prevent catalyst poisoning by MWNT impurities. MWNT bundles were disaggregated and highly coated with Poly(ethylene‐co‐norbornene) [P(E‐co‐N)] as revealed by transmission electron microscopy. Interestingly, P(E‐co‐N) copolymers showed T_g over 130 °C as well as norbornene content over 50 mol %; both values were higher than those obtained by the cationic active species in 1 /[Ph₃C][B(C₆F₅)₄]. A series of copolymerization reactions by 1 /[Ph₃C][B(C₆F₅)₄]/AlⁱBu₃ without MWNTs produced copolymers with the same unexpected features. The NMR analysis revealed the presence of rac‐ENNE and rac‐ENNNE sequences. Thus, AlⁱBu₃ changed the stereoirregular alternating copolymer microstructure produced by 1 /[Ph₃C][B(C₆F₅)₄]. We conclude that AlⁱBu₃ is not only a scavenger for CNT impurities, but it reacts with the THF ligand to give coordinatively unsaturated active species. Finally, P(E‐co‐N)/MWNT masterbatches were mixed with commercial TOPAS to produce cyclic olefin copolymer nanocomposites with excellent dispersion of filler. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5709–5719, 2009     

Neue Kupferkomplexe mit Phosphaalkenliganden. Molekülstruktur von [Cu{P(Mes*)C(NMe2)2}2]BF4 (Mes* = 2,4,6‐tBu3C6H2)

New Copper Complexes Containing Phosphaalkene Ligands. Molecular Structure of [Cu{P(Mes*)C(NMe₂)₂}₂]BF₄ (Mes* = 2,4,6‐tBu₃C₆H₂) Reaction of equimolar amounts of the inversely polarized phosphaalkene tBuP=C(NMe₂)₂ ( 1a ) and copper(I) bromide or copper(I) iodide, respectively, affords complexes [Cu₃X₃{μ‐P(tBu)C(NMe₂)₂}₃] ( 2 ) (X =Br) and ( 3 ) (X = I) as the formal result of the cyclotrimerization of a 1:1‐adduct. Treatment of 1a with [Cu(L)Cl] (L = PiPr₃; SbiPr₃) leads to the formation of compounds [CuCl(L){P(tBu)C(NMe₂)₂}] ( 4a ) (L = PiPr₃) and ( 4b ) (L = SbiPr₃), respectively. Reaction of [(MeCN)₄Cu]BF₄ with two equivalents of PhP=C(NMe₂)₂ ( 1b ) yields complex [Cu{P(Ph)C(NMe₂)₂}₂]BF₄ ( 5b ). Similarly, compounds [Cu{P(Aryl)C(NMe₂)₂}₂]BF₄ ( 5c (Aryl = Mes and 5d (Aryl = Mes*)) are obtained from ArylP=C(NMe₂)₂ ( 1c : Aryl = Mes; 1d : Mes*) and [(MeCN)₄Cu]BF₄ in the presence of SbiPr₃. Complexes 2 , 3 , 4a , 4b , and 5b‐5d are characterized by means of elemental analyses and spectroscopy (¹H‐, ¹³C{¹H}‐, ³¹P{¹H}‐NMR). The molecular structure of 5d is determined by X‐ray diffraction analysis.     

A Convenient Synthesis and Molecular Structure of Ru(CO)3[Ph2PN(i‐Bu)PPh2‐P,P]

Ru(CO)₃ [Ph₂PN (i‐Bu) PPh₂‐P, P] was conveniently obtained by the reaction of Ru(DMSO)₄Cl₂ with Ph₂PN(i‐Bu)‐PPb₂ and CO in the presence of Zn powder under mild conditions. The crystal and molecular structure was determined by X‐ray diffraction. This compound possesses a distorted trigonal bipyramidal configuration.     

C2‐symmetry dimethylated zirconocenes activated with triisobutyl aluminum as effective homogeneous catalysts for copolymerization of olefins

We investigated the catalytic performance of both bridged unsubstituted [rac‐EtInd₂ZrMe₂, rac‐Me₂SiInd₂ZrMe₂] and 2‐substituted [rac‐Et(2‐MeInd)₂ZrMe₂), rac‐Me₂Si(2‐MeInd)₂ZrMe₂] dimethylbisindenylzirconocenes activated with triisobutyl aluminum (TIBA) as a single activator in (a) homopolymerizations of ethylene and propylene, (b) copolymerization of ethylene with propylene and hexene‐1, and (c) copolymerization of propylene with hexene‐1 (at Al_TIBA/Zr = 100‐300 mol/mol). Unsubstituted catalysts were inactive in homopolymerizations of ethylene and propylene and copolymerization of propylene with hexene‐1 but exhibited high activity in copolymerizations of ethylene with propylene and hexene‐1. 2‐Substituted zirconocenes activated with TIBA were active in homopolymerizations of ethylene and propylene and exhibited high activity in copolymerization of ethylene with propylene and hexene‐1, and in copolymerization of propylene with hexene‐1. Comparative microstructural analysis of ethylene‐propylene copolymers prepared over rac‐Me₂SiInd₂ZrMe₂ activated with TIBA or Me₂NHPhB(C₆F₅)₄ has shown that the copolymers formed upon activation with TIBA are statistical in nature with some tendency to alternation, whereas those with borate activated system show a tendency to formation of comonomer blocks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2934–2941, 2010     

A Cobalt(I) Pincer Complex with an η2‐Caryl−H Agostic Bond: Facile C−H Bond Cleavage through Deprotonation,Radical Abstraction,and Oxidative Addition

The synthesis and reactivity of a Co^I pincer complex [Co(?³P,CH,P‐P(CH)P^NMe‐iPr)(CO)₂]⁺ featuring an η²‐ C_aryl?H agostic bond is described. This complex was obtained by protonation of the Co^I complex [Co(PCP^NMe‐iPr)(CO)₂]. The Co^III hydride complex [Co(PCP^NMe‐iPr)(CNtBu)₂(H)]⁺ was obtained upon protonation of [Co(PCP^NMe‐iPr)(CNtBu)₂]. Three ways to cleave the agostic C?H bond are presented. First, owing to the acidity of the agostic proton, treatment with pyridine results in facile deprotonation (C?H bond cleavage) and reformation of [Co(PCP^NMe‐iPr)(CO)₂]. Second, C?H bond cleavage is achieved upon exposure of [Co(?³P,CH,P‐P(CH)P^NMe‐iPr)(CO)₂]⁺ to oxygen or TEMPO to yield the paramagnetic Co^II PCP complex [Co(PCP^NMe‐iPr)(CO)₂]⁺. Finally, replacement of one CO ligand in [Co(?³P,CH,P‐P(CH)P^NMe‐iPr)(CO)₂]⁺ by CNtBu promotes the rapid oxidative addition of the agostic η²‐C_aryl?H bond to give two isomeric hydride complexes of the type [Co(PCP^NMe‐iPr)(CNtBu)(CO)(H)]⁺.     

A Cobalt(I) Pincer Complex with an η2‐Caryl−H Agostic Bond: Facile C−H Bond Cleavage through Deprotonation,Radical Abstraction,and Oxidative Addition

The synthesis and reactivity of a Co^I pincer complex [Co(ϰ³P,CH,P‐P(CH)P^NMe‐iPr)(CO)₂]⁺ featuring an η²‐ C_aryl−H agostic bond is described. This complex was obtained by protonation of the Co^I complex [Co(PCP^NMe‐iPr)(CO)₂]. The Co^III hydride complex [Co(PCP^NMe‐iPr)(CNtBu)₂(H)]⁺ was obtained upon protonation of [Co(PCP^NMe‐iPr)(CNtBu)₂]. Three ways to cleave the agostic C−H bond are presented. First, owing to the acidity of the agostic proton, treatment with pyridine results in facile deprotonation (C−H bond cleavage) and reformation of [Co(PCP^NMe‐iPr)(CO)₂]. Second, C−H bond cleavage is achieved upon exposure of [Co(ϰ³P,CH,P‐P(CH)P^NMe‐iPr)(CO)₂]⁺ to oxygen or TEMPO to yield the paramagnetic Co^II PCP complex [Co(PCP^NMe‐iPr)(CO)₂]⁺. Finally, replacement of one CO ligand in [Co(ϰ³P,CH,P‐P(CH)P^NMe‐iPr)(CO)₂]⁺ by CNtBu promotes the rapid oxidative addition of the agostic η²‐C_aryl−H bond to give two isomeric hydride complexes of the type [Co(PCP^NMe‐iPr)(CNtBu)(CO)(H)]⁺.     

Polypropylene and poly(ethylene‐co‐1‐octene) effective synthesis with diamine‐bis(phenolate) complexes: Effect of complex structure on catalyst activity and product microstructure

A series of group 4 metal complexes bearing amine‐bis(phenolate) ligands with the amino side‐arm donor: (μ‐O)[Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)₂ZrCl]₂ ( 1a ), R₂N(CH₂)₂N(CH₂‐2‐O‐3‐R¹‐5‐R²‐C₆H₂)₂TiCl₂ (R = Me, R¹, R² = tBu ( 2a ), R = iPr, R¹, R² = tBu ( 2b ), R = iPr, R¹ = tBu, R² = OMe ( 2c )), and Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)(CH₂‐2‐O‐C₆H₄)TiCl₂ ( 2d ) are used in ethylene and propylene homopolymerization, and ethylene/1‐octene copolymerization. All complexes, upon their activation with Al(iBu)₃/Ph₃CB(C₆F₅)₄, exhibit reasonable catalytic activity for ethylene homo‐ and copolymerization giving linear polyethylene with high to ultra‐high molecular weight (600·× 10³–3600·× 10³ g/mol). The activity of 1a /Al(iBu)₃/Ph₃CB(C₆F₅)₄ shows a positive comonomer effect, leading to over 400% increase of the polymer yield, while the addition of 1‐octene causes a slight reduction of the activity of the complexes 2a‐2d . The complexes with the NMe₂ donor group ( 2a , 2d , 1a ) display a high ability to incorporate a comonomer (up to 9–22 mol%), and the use of a bulkier donor group, N(iPr)₂ ( 2b , 2c ), results in a lower 1‐octene incorporation. All the produced copolymers reveal a broad chemical composition distribution. In addition, the investigated complexes polymerized propylene with the moderate ( 1a , 2a ) to low ( 2b‐2d ) activity, giving polymers with different microstructures, from purely atactic to isotactically enriched (mmmm = 28%). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2467–2476     

Zur Reaktivität des Ferriophosphaalkens (Z)‐[Cp*(CO)2FeP=C(tBu)NMe2] gegenüber Propiolsäureestern HC≡C‐CO2R (R=Me,Et) und Acetylendicarbonsäureestern RO2C‐C≡C‐CO2R (R=Me,Et, tBu)

On the Reactivity of the Ferriophosphaalkene (Z)‐[Cp*(CO)₂Fe‐P=C(tBu)NMe₂] towards Propiolates HC≡C‐CO₂R (R=Me, Et) and Acetylene Dicarboxylates RO ₂C‐C≡C‐CO₂R (R=Me, Et, tBu) The reaction of equimolar amounts of (Z)‐[Cp*(CO)₂Fe‐P=C(tBu)NMe₂] 3 and methyl‐ and ethyl‐propiolate ( 2a, b ) or of 3 and dialkyl acetylene dicarboxylates 1a (R=Me), 1b (Et), 1c (tBu) afforded the five‐membered metallaheterocycles [Cp*(CO) =C(tBu)NMe₂] ( 4a, b ) and [Cp*(CO) =C(tBu)NMe₂] ( 5a—c ). The molecular structures of 4b and 5a were elucidated by single crystal X‐ray analyses. Moreover, the reactivity of 4b towards ethereal HBF₄ was investigated.     

Toward block copolymers from nonliving isospecific single‐site catalytic systems

Ethene/1‐olefin blocky copolymers were obtained through nonliving insertion copolymerizations promoted by an isospecific single site catalyst. Propene or 4‐methyl‐1‐pentene were copolymerized with ethene with metallocenes endowed with different stereospecificity in propene polymerization: (i) aspecific “constrained geometry” half‐sandwich complex, {η¹:η⁵‐([tert‐butyl‐amido)dimethylsilyl](2,3,4,5‐tetramethyl‐1‐cyclopentadienyl)}titanium dichloride [Me₂Si(Me₄Cp)(N‐^tBu)TiCl₂] ( CG ), (ii) moderately isospecific rac‐ethylenebis(indenyl)zirconium dichloride [rac‐(EBI)ZrCl₂] ( EBI ), (iii) slightly more isospecific hydrogenated homologue, rac‐ethylenebis(tetrahydroindenyl)zirconium dichloride [rac‐(EBTHI)ZrCl₂] ( EBTHI ), (iv) highly iso‐specific rac‐[methylenebis(3‐tert‐butyl‐1‐indenyl)]zirconium dichloride [rac‐H₂C‐(3‐^tBuInd)₂ZrCl₂] ( TBI ), (v) most isospecific rac‐[isopropylidene‐bis(3‐tert‐butyl‐cyclopentadienyl)]zirconium dichloride [rac‐Me₂C‐(3‐^tBuCp)₂ZrCl₂] ( TBC ). Copolymerizations were described by a 2^nd order Markovian copolymerization model and data are proposed to correlate the formation of 1‐olefin sequences with catalytic site isospecificity, made by the cooperation of organometallic complex and growing chain. Blocky copolymers were prepared over wide ranges of compositions: with any of the isospecific metallocenes when 4‐methyl‐1‐pentene was the 1‐olefin and only with the highly isospecific ones ( TBI , TBC ) when propene was the comonomer. A penultimate unit effect was observed with TBI as the metallocene, whereas a 1^st order Markov model described the ethene/propene copolymerization from TBC . A moderately isospecific metallocene, such as EBI , is shown to be able to prepare blocky ethene copolymers with 4‐methyl‐1‐pentene. These results pave the way for the synthesis of new ethene based materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2063–2075, 2010     

[2+4] and [2+2] Cycloaddition Reactions of N‐Sulfinyl Carboxylic Acid Amides with (CF3)2BNMe2. Crystal Structure of cyclo‐(CF3)2B‐NMe2‐S(=O)‐N=C(p‐CH3C6H4)‐O

N‐sulfinylacylamides R‐C(=O)‐N=S=O react with (CF₃)₂BNMe₂ ( 1 ) to form, by [2+4] cycloaddition, six‐membered rings cyclo‐(CF₃)₂B‐NMe₂‐S(=O)‐N=C(R)‐O for R = Me ( 2 ), t‐Bu ( 3 ), C₆H₅ ( 4 ), and p‐CH₃C₆H₄ ( 5 ) while N‐sulfinylcarbamic acid esters R‐O‐C(=O)‐N=S=O react with 1 to yield mixtures of six‐membered (cyclo‐(CF₃)₂B‐NMe₂‐S(=O)‐N=C(OR)‐O) and four‐membered rings (cyclo‐(CF₃)₂B‐NMe₂‐S(=O)‐N(C=O)OR) for R = Me ( 6 and 9 ), Et ( 7 and 10 ), and C₆H₅ ( 8 and 11 ). The structure of 5 has been determined by X‐ray diffraction.     

Random propene/4‐methyl‐1‐pentene copolymers synthesized with C2 symmetric highly isospecific metallocenes

Propene (P)/4‐methyl‐1‐pentene (Y) copolymers in a wide range of composition were prepared with isospecific single center catalysts, rac‐Et(IndH₄)₂ZrCl₂ ( EBTHI ), rac‐Me₂Si(2‐Me‐BenzInd)₂ZrCl₂ ( MBI ), and rac‐CH₂(3‐^tBuInd)₂ZrCl₂ ( TBI ). ¹³C NMR analysis of copolymers and statistical elaboration of microstructural data at triad level were performed. Unprecedented and surprising results are here reported. Random P/Y copolymers were prepared with the most isospecific catalyst, TBI , that is known to prepare ethene/propene and ethene/4‐methyl‐1‐pentene copolymers with long homosequences of both comonomers, whereas longer homosequences of both comonomers were observed in copolymers from the less enantioselective metallocenes EBTHI and MBI . These findings, which are against what is acknowledged in the field, can pave the way for the preparation on a large scale of random propene‐based copolymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2575–2585     

Metallocene systems in propylene polymerization: Effect of triisobutylaluminum and lewis bases on the behavior of catalysts and properties of polymers

For two stereospecific metallocene catalysts, namely, syndiospecific Ph₂CCpFluHfMe₂ and isospecific rac-Me₂SiInd₂ZrMe₂, the introduction of Lewis bases into a reaction medium was shown to promote a marked rise in the efficiency of catalytic systems. In the case of the syndiospecific metallocene, the maximum effect of the base (a 10-fold increase in activity) was achieved using the (Ph₂CCpFluHfMe₂ + Ph₃N)/CPh₃B(C₆F₅)₄ catalytic system in the presence of Al-i-Bu₃ at a molar ratio of Al: Hf: B: N = 15: 1: 1: 1. When the polymerization of propylene was carried out in the presence of Al-i-Bu₃ and Ph₃N, an elastomeric stereoblock syndio/atactic polypropylene was produced. For the (rac-Me₂SiInd₂ZrMe₂ + amine)/CPh₃B(C₆F₅)₄ catalytic system, a 15-to 30-fold increase in activity was observed upon introduction of amines of the aniline type: Me₂NPh, Me-n-BuNPh, and NPh₃.     

Heterobi‐ and ‐trimetallic Ion Pairs of Zirconocene‐Based Isoselective Olefin Polymerization Catalysts with AlMe3

The reactivity towards AlMe₃ of discrete cationic ansa‐zirconocenes 2 a,b that are ubiquitously used in isoselective propylene polymerization and based on [{Ph(H)C(3,6‐tBu₂‐Flu)(3‐tBu‐5‐Et‐Cp)}ZrMe₂)] {Cp‐Flu} and rac‐[{Me₂Si‐(2‐Me‐4‐Ph‐Ind)₂}ZrMe₂] {SBI} was scrutinized. The first example of a structurally characterized Group 4 metallocene AlMe₃ adduct ( 3 b ) is reported. In the presence of excess AlMe₃, the {SBI}‐based AlMe₃ adduct 3 b undergoes a slow decomposition via C? H activation in a bridging methyl unit to yield a new species ( 4 b ) with a trimetallic {Zr(μ‐CH₂)(μ‐Me)AlMe(μ‐Me)AlMe₂} core. EXSY NMR data for the process 2 b ? 3 b → 4 b suggest very rapid and reversible binding of an additional AlMe₃ molecule onto AlMe₃ adduct 3 b . The resulting heterotrimetallic species intermediates exchange of methyl groups between different metal centers and slowly undergoes the C? H activation reaction towards 4 b .     

Hydrophilic Quaternary Ammonium‐Group‐Containing [FeFe]‐Hydrogenase Models: Synthesis,Structures, and Electrocatalytic Hydrogen Production

The first quaternary ammonium‐group‐containing [FeFe]‐hydrogenase models [(μ‐PDT)Fe₂(CO)₄{κ²‐(Ph₂P)₂N(CH₂)₂NMe₂BzBr}] ( 2 ; PDT=propanedithiolate) and [(μ‐PDT)Fe₂(CO)₄{μ‐(Ph₂P)₂N(CH₂)₂NMe₂BzBr}] ( 4 ) have been prepared by the quaternization of their precursors [(μ‐PDT)Fe₂(CO)₄{κ²‐(Ph₂P)₂N(CH₂)₂NMe₂}] ( 1 ) and [(μ‐PDT)Fe₂(CO)₄{μ‐(Ph₂P)₂N(CH₂)₂NMe₂}] ( 3 ) with benzyl bromide in high yields. Although new complexes 1 – 4 have been fully characterized by spectroscopic and X‐ray crystallographic studies, the chelated complexes 1 and 2 converted into their bridged isomers 3 and 4 at higher temperatures, thus demonstrating that these bridged isomers are thermodynamically favorable. An electrochemical study on hydrophilic models 2 and 4 in MeCN and MeCN/H₂O as solvents indicates that the reduction potentials are shifted to less‐negative potentials as the water content increases. This outcome implies that both 2 and 4 are more easily reduced in the mixed MeCN/H₂O solvent than in MeCN. In addition, hydrophilic models 2 and 4 act as electrocatalysts and achieve higher i_cat/i_p values and turnover numbers (TONs) in MeCN/H₂O as a solvent than in MeCN for the production of hydrogen from the weak acid HOAc.