Epoxy–amine reticulates observed by infrared spectrometry. III. Modifications of the structure and hydration abilities after irradiation in a humid atmosphere

This article is the third part of a series devoted to the study of the responsibilities of both humidity and irradiation in the aging process of amine‐cured epoxy resins. The basic technique used in this study was infrared spectrometry. In previous articles, we described the hydration of two kinds of epoxy resins widely used in the nuclear industry. In the first article, we reported results concerning the hydration of unirradiated resins; in the second article, these resins were first submitted to ionizing radiation in a dry atmosphere. In this article, we describe the effects of irradiation in a humid atmosphere and compare these effects to what was observed after irradiation in a dry atmosphere, as described in the previous articles. These effects were subtle: the humidity of the ambient atmosphere apparently protected the resins from oxidative degradation because, after irradiation in a humid atmosphere, a smaller number of carboxylic groups were formed. However, the water uptake increased after irradiation in a humid atmosphere. Thus, the humidity of the ambient atmosphere at the same time favored the rupture of chains, which released steric hindrances and allowed a greater number of H₂O molecules to reach hydrophilic sites in the resin. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1129–1136, 2001     

High resolution solid‐state 13C‐NMR study of as‐cured and irradiated epoxy resins

This article presents the effects of strong ionizing radiations on the physico‐chemical modifications of aliphatic or aromatic amine‐cured epoxy resins based on diglycidyl ether of bisphenol A (DGEBA). Such epoxy resins have a considerable number of applications in the nuclear industrial field and are known to be very stable under moderate irradiation conditions. Using extensively high resolution solid‐state ¹³C‐NMR spectroscopy we show that the aliphatic amine‐cured resin (DGEBA‐TETA) appears much more sensitive to gamma rays than the aromatic amine‐cured one (DGEBA‐DDM). On the one hand, qualitative analyses of the high resolution solid‐state ¹³C‐NMR spectra of both epoxy resins, irradiated under similar conditions (8.5 MGy), reveal almost no change in the aromatic amine‐cured resin whereas new resonances are observed for the aliphatic amine‐cured resin. These new peaks were interpreted as the formation of new functional groups such as amides, acids and/or esters and to alkene groups probably formed in the aliphatic amine skeleton. On the other hand, molecular dynamics of these polymers are investigated by measuring the relaxation times, T_CH, T_1ρH and T_1C , before and after irradiation. The study of relaxation data shows the formation, under irradiation, of a more rigid network, especially for the aliphatic amine‐cured system and confirms that aromatic amine‐cured resin [DGEBA‐4,4′‐diaminodiphenylmethane(DDM)] is much less affected by ionizing radiations than the aliphatic amine‐cured resin [DGEBA‐triethylenetetramine(TETA)]. Moreover, it has been shown that the molecular modifications generated by irradiation on the powder of the aliphatic‐amine‐cured resin appear to be homogeneously distributed inside the polymers as no phase separations can be deduced from the above analyses. Copyright © 2001 John Wiley & Sons, Ltd.     

Bio‐based epoxy vitrimers: Reprocessibility,controllable shape memory,and degradability

The research activities in the development of recyclable and reprocessable covalently crosslinked networks, and the construction of polymers from renewable resources are both stemmed from the economical and environmental problems associated with traditional thermosets. However, there is little effort in combination of these two attractive strategies in material designs. This article reported a bio‐based vitrimer constructed from isosorbide‐derived epoxy and aromatic diamines containing disulfide bonds. The resulted dynamic epoxy resins showed comparable thermomechanical properties as compared to similar epoxy networks cured by traditional curing agent. Rheological tests demonstrated the fast stress relaxation of the dynamic network due to the rapid metathesis of disulfide bonds at temperature higher than glass transition temperature. This feature permitted the recycling and reprocessing of the fragmented samples for several times by hot press. The dynamic epoxy resins also exhibited shape‐memory effect, and it is demonstrated that the shape recovery ratio could be readily adjusted by controlling the stress relaxation in the temporary state at programming temperature. Moreover, the degradability of the dynamic epoxy resins in alkaline aqueous solution was also demonstrated. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1790–1799     

Factors affecting H2O absorption of the epoxy tetraglycidyl-4,4′-diaminodiphenyl methane cured with diaminodiphenyl sulfone

It was found that the amount of water absorbed at room temperature in cured tetraglycidyl-4,4′-diaminodiphenyl methane/diaminodiphenyl sulfone epoxy resins increases as the curing time or temperature increases while the amount of tetrahydrofuran-soluble extractables and the room temperature density decreases. These data suggest that the free volume increases with the extent of cure and the resins become more accessible to water. While the driving force for water absorption is the electrostatic attraction between water and the functional groups in the epoxy, the results suggest that equilibrium H₂O absorption is determined primarily by unoccupied volume of the epoxy resin.     

Procedures conditioning the absorption/desorption behavior of cold‐cured epoxy resins

The absorption/desorption behavior of a commercial cold‐cured bisphenolic epoxy resin, subjected to different treatments prior to exposure to water, was analyzed. The epoxy system has been already used as both matrix and adhesive for the manufacture and application, respectively, of fiber reinforced polymers composites employed for rehabilitation procedures. The effects of different curing, conditioning, and storing conditions on the water absorption/desorption process taking place in the cured resin were evaluated. The different conditioning procedures used to dry the specimens before their exposure to water caused a different extent of physical aging and of curing on each system, influencing the amount and the rate of diffusion of the water molecules inside the specimens. Moreover, if the specimens are subjected to thermohygrometric cycles prior to immersion in water, the rate of diffusion and the amount of water also depends on the presence of water molecules inside the cured resins not easy to remove by any drying treatment. During all the hygrometric treatments performed, a deaging process took place. The kinetic of this deaging process for the not‐fully cured systems depends on the additional crosslinking taking place in the samples. The different procedures used to condition the specimens also affect the variations in glass transition temperature (T_g) of the cured systems during and after immersion in water. Finally, the different drying procedures employed proved to be not equally appropriate for cold‐cured epoxy resins. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1320–1336, 2008     

Synergism and multiple mechanical relaxations observed in ternary systems based on benzoxazine,epoxy, and phenolic resins

The synergism in the glass‐transition temperature (T_g) of ternary systems based on benzoxazine (B), epoxy (E), and phenolic (P) resins is reported. The systems show the maximum T_g up to about 180 °C in BEP541 (B/E/P = 5/4/1). Adding a small fraction of phenolic resin enhances the crosslink density and, therefore, the T_g in the copolymers of benzoxazine and epoxy resins. To obtain the ultimate T_g in the ternary systems, 6–10 wt % phenolic resin is needed. The molecular rigidity from benzoxazine and the improved crosslink density from epoxy contribute to the synergistic behavior. The mechanical relaxation spectra of the fully cured ternary systems in a temperature range of −140 to 350 °C show four types of relaxation transitions: γ transition at −80 to −60 °C, β transition at 60–80 °C, α₁ transition at 135–190 °C, and α₂ transition at 290–300 °C. The partially cured specimens show an additional loss peak that is frequency‐independent as a result of the further curing process of the materials. The ternary systems have a potential use as electronic packaging molding compounds as well as other highly filled systems. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1687–1698, 2000     

A dismantlable photoadhesion system fabricated by an anionic UV curing of epoxy resins with a base amplifier having a disulfide bond

A base amplifier (BA) that autocatalytically generates a diamine having a disulfide bond has been developed. Diamines generated from this BA are integrated into cross‐linked networks of epoxy resins that also have disulfide bonds. Anionic UV curing is performed using a photobase generator, the BA and the epoxy resins, and cured films are obtained after UV irradiation and subsequent heating at 160 °C. Furthermore, this curing system is applied successfully to adhesion of two stainless substrates, which is cancelled with gentle heating and a shear force. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 237–241     

Degradable and chemically recyclable epoxy resins containing acetal linkages: Synthesis,properties, and application for carbon fiber‐reinforced plastics

Four sorts of epoxy resins containing degradable acetal linkages were synthesized by the reaction of bisphenol A (BA) or cresol novolak (CN) resin with vinyl ethers containing a glycidyl group [4‐vinlyoxybutyl glycidyl ether (VBGE) and cyclohexane dimethanol vinyl glycidyl ether (CHDMVG)] and cured with known typical amine‐curing agents. The thermal and mechanical properties of the cured resins were investigated. Among the four cured epoxy resins, the CN‐CHDMVG resin (derived from CN and CHDMVE) exhibited relatively high glass transition temperature (T_g = ca. 110 °C). The treatment of these cured epoxy resins with aqueous HCl in tetrahydrofuran (THF) at room temperature for 12 h generated BA and CN as degradation main products in high yield. Carbon fiber‐reinforced plastics (CFRPs) were prepared by heating the laminated prepreg sheets with BA‐CHDMVG (derived from BA and CHDMVE) and CN‐CHDMVG, in which strands of carbon fibers are impregnated with the epoxy resins containing conventional curing agents and curing accelerators. The obtained CFRPs showed good appearance and underwent smooth breakdown with the aqueous acid treatment in THF at room temperature for 24 h to produce strands of carbon fiber without damaging their surface conditions and tensile strength. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel flame‐retardant thermosets: Phosphine oxide‐containing diglycidylether as curing agent of phenolic novolac resins

Phosphorus‐containing novolac–epoxy systems were prepared from novolac resins and isobutyl bis(glycidylpropylether) phosphine oxide (IHPOGly) as crosslinking agent. Their curing behavior was studied and the thermal, thermomechanical, and flame‐retardant properties of the cured materials were measured. The T_g and decomposition temperatures of the resulting thermosets are moderate and decrease when the phosphorous content increases. Whereas the phosphorous species decrease the thermal stability, at higher temperatures the degradation rates are lower than the degradation rate of the phosphorous‐free resin. V‐O materials were obtained when the resins were tested for ignition resistance with the UL‐94 test. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3516–3526, 2004     

Effect of crosslink length on the enthalpy relaxation of fully cured epoxy–diamine resins

Enthalpy relaxation of epoxy–diamine thermosets of different crosslink lengths (CLL) has been studied by DSC. The epoxy resins based on diglycidyl ether of bisphenol A were cured with ethylenediamine (FEDA), and diamines of polyoxypropylene of 2.6 and 5.6 oxypropylene units, named FJ230 and FJ400, respectively. As was expected, increasing the CLL decreases the glass transition temperature T_g from 121°C (FEDA) to 47°C (FJ400). Aging experiments at T_g − 20 K for each resin permit the determination of the enthalpy loss, the relaxation rate per decade (β_H), and the nonlinearity parameter, x. The apparent activation energy, Δh*, and the nonexponentiality parameter β are found for each resin from intrinsic cycles in which the sample is heated at 10 K min⁻¹ following cooling at various rates through the glass transition region. An increase of CLL is related to an increase of β_H, and of the nonlinearity parameter. In agreement with the general trend for thermoplastic polymers, the increase of the parameter x is correlated with a decrease of Δh* and with an increase in the nonexponentiality parameter. Application of the Adam–Gibbs (AG) theory reveals that the parameters B and T_f/T₂ increase with CLL, corresponding to a decrease of the nonlinear behavior of the glassy epoxies. However, the T₂ values calculated in this way appear unrealistic, and the alternative assumption that T₂ = T_g −51.6 K, making use of the “universal” WLF constant, leads to a much smaller variation of B, which nevertheless still increases with CLL. From a consideration of the minimum number of configurations required for a cooperative rearrangement, it is argued that the elementary activation energy Δμ increases, and the minimum size of the cooperatively rearranging region decreases as CLL increases. This is consistent with the relaxation process becoming more cooperative as the CLL decreases, as is suggested by the decrease in the value of β. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 456–468, 2000     

The stokes and robinson hydration theory: A modification with application to concentrated electrolyte solutions

The proposed extension to the Stokes and Robinson hydration theory is based on the premise that H₂O molecules of electrolyte solutions reside in two unique environments, the solvent environment and the hydration envelope (or sheath) environment. Changes to the chemical potential of H₂O in either environment result in redistribution of H₂O molecules between the environments; consequently hydration numbers of electrolytes decrease as the solvent activity decreases. An equation derived from the theory and containing two adjustable parameters reproduces electrolyte activity coefficients more accurately than does the original Stokes and Robinson equation.     

Theoretical Study of the Dimerization of Chlorophyll (a) and Its Hydrates: Implication for Chlorophyll (a) Aggregation

Dimeric structures chlorophyll (a) (Chla) and their mono‐ and dihydrated have been suggested to play an important role in the mechanism of photoreaction center chlorophyll special pairs PSI and PSII. Despite their functional importance, the molecular basis structures for interacting two Chla molecules and the structural stabilization role of H₂O in the formation of hydrated Chla dimer complexes is poorly understood. In this article, the different coordination modes between two interacting Chla molecules and the configurational (orientation and distance) features between the dimer and bound H₂O molecules are characterized by means of super molecule approach the density functional theory DFT. An estimation of the thermodynamic quantities is made for Chla dimerization and hydration processes. The results indicate that structure including ester linkages via H₂O hydrogen bonding is the most favorable conformation for the dihydrated chlorophyll (a) dimer at B3LYP/6‐31G*‐DCP level of calculation. The dispersion interaction is shown to be of great significance for the Chla dimer stabilization. In aqueous nonpolar solvent, the thermodynamics show that Chla has a slightly stronger driving force for full hydration than for dimerization and that hydration of the dimers is rather weakly exergonic. The tetrahydrated dimers having a similar arrangement to that in crystals of ethyl chlorophyllide (a) dihydrate are found to be more stable than the Chla dihydrated dimer. The data underscore the key role of H‐bonding in the stability of Chla‐H₂O adducts and, in particular, the great importance of the Chla monomeric dihydrated species in the hydration and dimerization of Chla in aqueous media. Clearly, the Chla dihydrates (Chla‐2 H₂O) are found more stable than the monohydrates (Chla‐H₂O) and the Chla dimers (Chla₂), owing to a particular structure in which cooperative interactions occur between the H₂O molecules and Chla. Calculations also indicate that the most thermodynamically preferred pathway for the formation of Chla dimer hydrates can be represented by two steps: the first corresponds to the formation of Chla monomeric dihydrates and the second is the dimerization of the dihydrates on to tetrahydrated Chla dimers. These results allow to obtain a new possible pathway for Chla dimer formation processes and could provide new insights to the aggregation of chlorophyll (a) in solution.     

A flame‐retardant phosphate and cyclotriphosphazene‐containing epoxy resin: Synthesis and properties

A novel flame‐retardant epoxy resin, (4‐diethoxyphosphoryloxyphenoxy)(4‐glycidoxyphenoxy)cyclotriphosphazene (PPCTP), was prepared by the reaction of epichlorohydrin with (4‐diethoxyphosphoryloxyphenoxy)(4‐hydroxyphenoxy)cyclotriphosphazene and was characterized by Fourier transform infrared, ³¹P NMR, and ¹H NMR analyses. The epoxy resin was further cured with diamine curing agents, 4,4′‐diaminodiphenylmethane (DDM), 4,4′‐diaminodiphenylsulfone (DDS), dicyanodiamide (DICY), and 3,4′‐oxydianiline (ODA), to obtain the corresponding epoxy polymers. The curing reactions of the PPCTP resin with the diamines were studied by differential scanning calorimetry. The reactivities of the four curing agents toward PPCTP were in the following order: DDM > ODA > DICY > DDS. In addition, the thermal properties of the cured epoxy polymers were studied by thermogravimetric analysis, and the flame retardancies were estimated by measurement of the limiting oxygen index (LOI). Compared to a corresponding Epon 828‐based epoxy polymer, the PPCTP‐based epoxy polymers showed lower weight‐loss temperatures, higher char yields, and higher LOI values, indicating that the epoxy resin prepared could be useful as a flame retardant. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 972–981, 2000     

Synthesis and properties of biobased epoxy resins. part 1. Glycidylation of flavonoids by epichlorohydrin

Biobased epoxy resins were synthesized from a catechin molecule, one of the repetitive units in natural flavonoid biopolymers also named condensed tannins. The reactivity of catechin toward epichlorohydrin to form glycidyl ether derivatives was studied using two model compounds, resorcinol and 4‐methylcatechol, which represent the A and B rings of catechin, respectively. These model molecules clearly showed differences in reactivity upon glycidylation, explaining the results found with catechin monomer. The reaction products were characterized by both FTIR and NMR spectroscopy and chemical assay. The glycidyl ether of catechin (GEC) was successfully cured in various epoxy resin formulations. The GECs thermal properties showed that these new synthesized epoxy resins displayed interesting properties compared to the commercial diglycidyl ether of bisphenol A (DGEBA). For instance, when incorporated up to 50% into the DGEBA resin, GEC did not modify the glass‐transition temperature. Epoxy resins formulated with GEC had slightly lower storage moduli but induced a decrease of the swelling percentage, suggesting that GEC‐enhanced crosslinking in the epoxy resin networks. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and Properties of Silphenylene-containing Epoxy Resins with High UV-stability

Two novel silphenylene-containing cycloaliphatic epoxy resins, 1,4-di [2-(3, 4-epoxycyclohexylethyl) dimethylsilyl] benzene (DEDSB) and 1,3,5-tri [2-(3, 4-epoxycyclohexylethyl) dimethylsilyl] benzene (TEDSB) were synthesized through in situ Grignard reaction and hydrosilylation, and characterized by FT-IR and ¹H-NMR. They were colorless transparent viscous liquids. Methyhexahydrophthalic anhydride (MeHHPA) was used to cure the epoxy resins to give glassy solids with high optical clarity. Differential scanning calorimetry (DSC) results indicated that DEDSB and TEDSB showed similar curing reactivity. The cured TEDSB had a higher glass transition temperature, a higher storage modulus and a lower coefficient of linear thermal expansion than the cured DEDSB due to a higher crosslink density. The cured silphenylene-containing epoxy resins exhibited a much higher resistance to discoloration under UV irradiation than the commonly used epoxy resins diglycidyl ether of bisphenol-A (DGEBA). XPS analysis revealed that they were much less susceptible to photo-oxidation than DGEBA.     

Thermal cured epoxy resins using certain calixarenes and their esterified derivatives as curing agents

The acetyl esterified calixarene (CA) derivatives were prepared from calix[4]resorcinarene (CRA), and p‐tert‐butylcalixarene (BCA[n], n = 4, 6, 8), respectively. Using these CA derivatives as curing agents, the thermal curing reactions of two multifunctional epoxy resins (jER 828, 186 g/equiv., and ESCN, 193.7 g/equiv.) were investigated. The temperatures of glass transition (T_g) and decomposition (T) were measured by DSC and TGA, respectively. Based on the yields, T_gs, and T_ds of the thermal cured jER 828 epoxy resin with CRA‐E100, the curing conditions were optimized to be tetrabutylphosphonium bromide (TBPB) as catalyst in NMP at 160 °C for 15 h. Under this curing condition, the cured materials of jER 828 or ESCN using various CA derivatives as curing agents were prepared. Except for BCA4 derivatives, the yields of thermal curing reaction were higher than 90%. T_gs and Ts of the resultant cured materials were in the range of 113–248 °C and 363–404 °C, respectively. These results mean that the cured epoxy resins with excellent T_gs were successfully formed by using CA derivatives as curing agents. It was also found that the T_gs of cured epoxy resins were strongly affected by the degree of esterification of CA derivatives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1931–1942, 2010     

A Monte Carlo simulation of Fe2+ aqueous solvation

A Monte Carlo simulation of Fe²⁺ aqueous solvation, at 298 K, including 100 water molecules, has been done using periodic boundary conditions under the minimum image conversion. The energy has been calculated in the pair-potential approach, employing the MCY potential for the H₂OH₂O interaction and an ab initio analytical potential generated by us for the Fe²⁺H₂O interaction. The examination of interaction energies and of the radial distribution functions clearly show that the first hydration shell is formed by eight water molecules. By classifying the generated configurations into different significant structures of the solvent, it has been found that the eight water molecules of the first hydration shell are situated in a lightly distorted D_4d structure which maximizes the water—solute stabilization and minimizes the water—water repulsion. Finally, the validity of our theoretical predictions is discussed.     

Hydration of the ions Al3+ and Cu2+. An ab initio SCF study

Ab initio calculations are reported for the systems Al(H₂O)_n³⁺ and Cu(H₂O)_n²⁺ with n up to 7. The calculated binding energies increase monotically up to n = 6, with equal binding energies for n = 6 and 7 for the Al³⁺ cation. An estimate of the enthalpy of hydration of Al³⁺ is given, based on model calculations with one or two water molecules from the second solvation shell. An SN1 (dissociative) mechanism for the exchange of the water molecules from the first hydration shell of Al³⁺ appears energetically favorable if the leaving molecule remains in the second hydration shell.     

Application of FTIR spectroscopy in the study of lattice vibration for mixed crystals

FT-IR spectroscopy was utilized to characterize the structure hydration and dehydration of mucin in vitro. The results indicated that both the protein chain and carbohydrate moiety are hydrated with the water molecules. In addition, the hydration and dehydration mechanism of mucin are quite different in H₂O and D₂O media.