Free‐radical polymerization of dioxolane and dioxane derivatives: Effect of fluorine substituents on the ring opening polymerization

Partially fluorinated and perfluorinated dioxolane and dioxane derivatives have been prepared to investigate the effect of fluorine substituents on their free‐radical polymerization products. The partially fluorinated monomer 2‐difluoromethylene‐1,3‐dioxolane (I) was readily polymerized with free‐radical initiators azobisisobutyronitrile or tri(n‐butyl)borane–air and yielded a vinyl addition product. However, the hydrocarbon analogue, 2‐methylene‐1,3‐dioxolane (II), produced as much as 50% ring opening product at 60 °C by free‐radical polymerization. 2‐Difluoromethylene‐4‐methyl‐1,3‐dioxolane (III) was synthesized and its free‐radical polymerization yielded ring opening products: 28% at 60 °C, decreasing to 7 and 4% at 0 °C and −78 °C, respectively. All the fluorine‐substituted, perfluoro‐2‐methylene‐4‐methyl‐1,3‐dioxolane (IV) produced only a vinyl addition product with perfluorobenzoylperoxide as an initiator. The six‐membered ring monomer, 2‐methylene‐1,3‐dioxane (V), caused more than 50% ring opening during free‐radical polymerization. However, the partially fluorinated analogue, 2‐difluoromethylene‐1,3‐dioxane (VI), produced only 22% ring opening product with free‐radical polymerization and the perfluorinated compound, perfluoro‐2‐methylene‐1,3‐dioxane (VII), yielded only the vinyl addition polymer. The ring opening reaction and the vinyl addition steps during the free‐radical polymerization of these monomers are competitive reactions. We discuss the reaction mechanism of the ring opening and vinyl addition polymerizations of these partially fluorinated and perfluorinated dioxolane and dioxane derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5180–5188, 2004     

Radical ring‐opening polymerization

The radical ring‐opening polymerization (RROP) behavior of the following monomers is reviewed, and the possibility for application to functional materials is described: cyclic disulfide, bicyclobutane, vinylcyclopropane, vinylcyclobutane, vinyloxirane, vinylthiirane, 4‐methylene‐1,3‐dioxolane, cyclic ketene acetal, cyclic arylsulfide, cyclic α‐oxyacrylate, benzocyclobutene, o‐xylylene dimer, exo‐methylene‐substituted spiro orthocarbonate, exo‐methylene‐substituted spiro orthoester, and vinylcyclopropanone cyclic acetal. RROP is a promising candidate for producing a wide variety of environmentally friendly functional polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 265–276, 2001     

Synthesis and characterizations of the four‐armed amphiphilic block copolymer S[poly(2,3‐dihydroxypropyl acrylate)‐block‐poly(methyl acrylate)]4

The polymers poly[(2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate] (PDMDMA) and four‐armed PDMDMA with well‐defined structures were prepared by the polymerization of (2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate (DMDMA) in the presence of an atom transfer radical polymerization (ATRP) initiator system. The successive hydrolyses of the polymers obtained produced the corresponding water‐soluble polymers poly(2,3‐dihydroxypropyl acrylate) (PDHPA) and four‐armed PDHPA. The controllable features for the ATRP of DMDMA were studied with kinetic measurements, gel permeation chromatography (GPC), and NMR data. With the macroinitiators PDMDMA–Br and four‐armed PDMDMA–Br in combination with CuBr and 2,2′‐bipyridine, the block polymerizations of methyl acrylate (MA) with PDMDMA were carried out to afford the AB diblock copolymer PDMDMA‐b‐MA and the four‐armed block copolymer S{poly[(2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate]‐block‐poly(methyl acrylate)}₄, respectively. The block copolymers were hydrolyzed in an acidic aqueous solution, and the amphiphilic diblock and four‐armed block copolymers poly(2,3‐dihydroxypropyl acrylate)‐block‐poly(methyl acrylate) were prepared successfully. The structures of these block copolymers were verified with NMR and GPC measurements. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3062–3072, 2001     

Free radical ring‐opening polymerization of cyclic allylic sulfides: Liquid monomers with low polymerization volume shrinkage

The free radical polymerization of four methylated cyclic allylic sulfides was examined with reference to their polymerization volume shrinkage and the effect of ring size on reactivity. The compounds examined were 2‐methyl‐5‐methylene‐1,3‐dithiane ( 5 ) (solid), 2‐methyl‐6‐methylene‐1,4‐dithiepane ( 6 ) (liquid), 6‐methyl‐3‐methylene‐1,5‐dithiacyclooctane ( 7 ) (liquid), and 6,8‐dimethyl‐3‐methylene‐1,5‐dithiacyclooctane ( 8 ) (liquid). The monomers were stable materials not requiring any special handling or storage conditions. They were polymerized in bulk using thermal azobisisobutyronitrile (AIBN, VAZO88) and photochemical initiators (Ciba DAROCUR 1173) and in benzene solutions (AIBN, 70 °C). The six‐membered ring monomer 5 was unreactive whereas seven‐membered ring monomer 6 polymerized to high conversion in bulk. In addition, 6 did not polymerize in benzene solution at 70 °C at [ 6 ] = 1.25M. Eight‐membered ring monomers 7 and 8 polymerized in bulk to complete conversion with thermal and photochemical initiators to give lightly crosslinked materials. Near complete conversion to soluble polymers could be obtained in solution polymerizations in benzene. Soluble polymers were also obtained in photochemical initiated bulk polymerizations by lowering initiator concentrations or length of irradiation. The methyl substituent had no effect on which allylic carbon–sulfur bond fragmented in the ring‐opening step. The polymerization volume shrinkages of monomers 7 and 8 were 1.5 and 2.4% respectively and together with monomer 4 (1.5–2.0% shrinkage) are the best available liquid free radical ring‐opening monomers that can be polymerized in bulk at room temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 202–215, 2001     

Isomerization polymerization and copolymerization of glycidyl alkanoates catalyzed by methylaluminum bis(2,6‐di‐t‐butyl‐4‐methylphenoxide)

The isomerization polymerizations of glycidyl propionate (1b), octanoate (1c), and stearate (1d) with methylaluminum bis(2,6‐di‐tert‐butyl‐4‐methylphenoxide) (3) were investigated. The polymerizations selectively gave poly(2‐alkyl‐1,3‐dioxolane‐4,2‐diyloxymethylene)s (2), although the polymer yield as well as the polymer molecular weight significantly decreased as the acyl chain of 1 was lengthened. These polymers readily hydrolyzed to glycerin and the corresponding fatty acids under mild conditions. The copolymerizations of glycidyl acetate (1a) with these monomers were also examined. In any combination, the composition of the obtained copolymer was essentially identical with the feed ratio, while both copolymer yield and molecular weight decreased as the feed of 1a was decreased. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 435–444, 1999 (See graphics.)     

Radical polymerization behavior of a vinyl monomer bearing five‐membered cyclic carbonate structure and reactions of the obtained polymers with amines

Radical polymerization behavior of a vinyl substituted cyclic carbonate, 4‐phenyl‐5‐vinyl‐1,3‐dioxoran‐2‐one ( 1 ), is described. Radical polymerization of 1 proceeded through selective vinyl polymerization to produce polymers bearing carbonate groups in the side chain, in contrast to that of an oxirane analogue of 1 , 1‐phenyl‐2‐vinyl oxirane that proceeds via the selective ring‐opening fashion. Although the homopolymerization of 1 produce polymers in relatively lower yield, copolymerizations effectively provided cyclic carbonate‐containing copolymers. Nucleophilic addition of primary amines to the resulting homopolymers and copolymers produced the corresponding multifunctional polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 584–592, 2005     

Novel functional initiators for oxazoline polymerization

The initiating behavior of the functional tosylates 1 – 4 and triflates 5 and 6 for the cationic ring‐opening polymerization of 2‐methyl‐1,3‐oxazoline was investigated. The emphasis was directed at tosylates and triflates with 2,2‐dimethyl‐1,3‐dioxolane‐, 2,3‐epoxypropyl‐, 2,3‐didodecanoyl‐glycerol‐, and cholest‐5‐en‐moieties that allow the construction of amphiphilic polyoxazoline conjugates. The tosylates were prepared by a simple reaction of the corresponding alcohols with p‐toluenesulfonyl chloride, whereas the preparation of the corresponding triflates required low temperature and the use of 2,6‐di‐tert‐butylpyridine as a sterically hindered base. Among the initiators tested, 2,2‐dimethyl‐(4‐trifluoromethanesulfonyloxymethyl)‐1,3‐dioxolane 6 gave the best results in respect to molecular weight and polydispersity. Starting from the corresponding functional oxazoline polymers obtained with 6 as an initiator, amphiphilic lipid‐polyoxazoline conjugates with a diacylglycerol backbone could be prepared. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2821–2831, 2001     

2-位取代的4-亚甲基-1,3-二氧环戊烷开环聚合反应研究

合成了两种新单体，４ 亚甲基 ２ 苯乙烯基 １，３ 二氧环戊烷和４ 亚甲基 ２ 苯乙烯基 ２ 甲基 １，３ 二氧环戊烷．研究了这两种单体的自由基和阳离子聚合反应．根据聚合物的红外光谱和核磁共振碳、氢谱，确定了聚合物的结构，讨论了聚合反应机理，特别对２ 位取代基对聚合反应和产物的影响作了初步的探讨．     

Comparative study of the mechanical relaxation behavior of polymethacrylates containing different bulky side groups

The syntheses of poly(1,3‐dioxan‐5‐yl methacrylate), poly(cis‐2‐phenyl‐1,3‐dioxan‐5‐yl methacrylate), poly(trans‐2‐phenyl‐1,3‐dioxan‐5‐yl methacrylate), poly(cis‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate), and poly(trans‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate) are reported. The mechanical relaxation spectrum of the simplest polymer, poly(1,3‐dioxan‐5‐yl methacrylate), exhibits a prominent β relaxation centered at ?98 °C, at 1 Hz, followed in increasing order of temperature by an ostensible glass–rubber relaxation process. In addition to the β relaxation, the loss curves of poly(trans‐2‐phenyl‐1,3‐dioxan‐5‐yl methacrylate) and poly(trans‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate) display in the glassy state a high activation energy relaxation, named the β* process, that seems to be a precursor of the glass–rubber relaxation of these polymers. The mechanical spectra of poly(trans‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate) and poly(cis‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate) exhibit a low activation energy process in the low‐temperature side of the spectra, which is absent in the other polymers. The molecular origin of the mechanical activity of these polymers in the glassy state is discussed in qualitative terms. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1154–1162, 2002     

Synthesis and properties of segmented main‐chain liquid‐crystalline polyurethanes with a high aspect ratio mesogenic diol as a chain extender

Main‐chain liquid‐crystalline polyurethanes were synthesized based on a high aspect ratio mesogenic diol (4‐{[4‐(6‐hydroxyhexyloxy)‐phenylimino]‐methyl}‐benzoic acid 4‐{[4‐(6‐hydroxyhexyloxy)‐phenylimino]‐methyl}‐phenyl ester) as a chain extender; polycaprolactone (PCL) diol soft segments of different number‐average molecular weights (530, 1250, or 2000); and different diisocyanates, including 1,4‐hexamethylene diisocyanate (HMDI), 4,4′‐methylene bis(cyclohexyl isocyanate) (H₁₂MDI), and 4,4′‐methylene bis(phenyl isocyanate) (MDI). The structure of the polymers was confirmed with Fourier transform infrared spectroscopy, and differential scanning calorimetry and polarizing microscopy measurements were carried out to examine the liquid‐crystalline and thermal properties of the polyurethanes, respectively. The mesogenic diol was partially replaced with 20–50 mol % PCL. A 20 mol % mesogen content was sufficient to impart a liquid crystalline property to all the polymers. The partial replacement of the mesogenic diol with PCL of various molecular weights, as well as the various diisocyanates, influenced the phase transitions and the occurrence of mesophase textures. Characteristic liquid‐crystalline textures were observed when a sufficient content of the mesogenic diol was present. Depending on the flexible spacer length and the mesogenic content, grained and threadlike textures were obtained for the HMDI and H₁₂MDI series polymers, whereas the polyurethanes prepared from MDI showed only grained textures for all the compositions. The polymers formed brittle films and could not be subjected to tensile tests. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1527–1538, 2002     

Synthesis and properties of new organo‐soluble and strictly alternating aromatic poly(ester‐imide)s from 3,3‐bis[4‐(trimellitimidophenoxy)phenyl]phthalide and bisphenols

A series of new strictly alternating aromatic poly(ester‐imide)s having inherent viscosities of 0.20–0.98 dL/g was synthesized by the diphenylchlorophosphate (DPCP) activated direct polycondensation of the preformed imide ring‐containing diacid, 3,3‐bis[4‐(trimellitimidophenoxy)phenyl]phthalide (I), with various bisphenols in a medium consisting of pyridine and lithium chloride. The diimide–diacid I was prepared from the condensation of 3,3‐bis[4‐(4‐aminophenoxy)phenyl]phthalide and trimellitic anhydride. Most of the resulting polymers showed an amorphous nature and were readily soluble in a variety of organic solvents such as N‐methyl‐2‐pyrrolidone (NMP) and N,N‐dimethylacetamide (DMAc). Transparent and flexible films of these polymers could be cast from their DMAc solutions. The cast films had tensile strengths ranging 66–105 MPa, elongations at break from 7–10%, and initial moduli from 1.9–2.4 GPa. The glass‐transition temperatures of these polymers were recorded between 208–275 °C. All polymers showed no significant weight loss below 400 °C in the air or in nitrogen, and the decomposition temperatures at 10% weight loss all occurred above 460 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1090–1099, 2000     

Poly(p‐phenylene vinylene) derivatives containing triazole or oxadiazole segments: Connector effect in optical,electrochemical, and electroluminescent properties

To study the effect of connector structure between hole‐ and electron‐transporting segments, we synthesized and characterized new electroluminescent polymers P 1 – P 7 consisting of hole‐transporting 1,4‐bis(hexyloxy)‐2,5‐distyrylbenzene (DSB: P 1 and P 2 ) and electron‐transporting 4‐(4‐(hexyloxy)phenyl)‐3,5‐diphenyl‐4H‐1,2,4‐triazole (TAZ: P 3 and P 4 ) or 2‐(2,5‐bis(hexyloxy)‐4‐(5‐phenyl‐1,3,4‐oxadiazol)phenyl)‐5‐phenyl‐1,3,4‐oxadiazole (DIOXD: P 5 – P 7 ) segments linked by different connectors. The connectors between hole‐ and electron‐transporting segments are (1) 1,4‐phenylene in P 3 and P 5 , (2) 1,4‐divinylbenzene in P 4 and P 6 , and (3) 4,4′‐biphenyl in P 7 . Three corresponding end‐capped model polymers P 1‐M , P 2‐M , and P 3‐M were also synthesized to evaluate the effect of end groups. From optimized semiempirical MNDO calculations, the adjacent benzene rings between DSB and TAZ or DIOXD chromophores in P 3 , P 5 , and P 7 twist about 81°–89°. The effect of twisted architectures and connectors in optical and electrochemical properties for P 1 – P 7 have been discussed by comparing with copolymers P 1 and P 2 , which possess single bond or ether spacer as connectors. From cyclic voltammograms, the torsion in P 3 , P 5 , and P 7 confines electron delocalization and leads to simultaneously enhanced hole and electron affinity as compared to those of P 1 and P 2 . Furthermore, double‐layer light‐emitting diodes with a configuration of ITO/PEDOT:PSS/ P 1 – P 7 /Al all reveal green–yellow electroluminescence with maximum luminance at 8–320 cd/m² and their performances are greatly influenced by the connector's structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4514–4531, 2006     

Optically active polyacrylamides bearing an oxazoline pendant: Influence of stereoregularity on both chiroptical properties and chiral recognition

Enantiopure acrylamide derivatives, N‐[o‐(4‐methyl‐4,5‐dihydro‐1,3‐oxazol‐2‐yl) phenyl]acrylamide (MeOPAM), N‐[o‐(4‐isopropyl‐4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenyl]acrylamide (PrⁱOPAM), and N‐[o‐(4‐phenyl‐4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenyl]acrylamide (PhOPAM), were synthesized and radically polymerized in the presence of rare earth metal trifluoromethanesulfonates (Ln(OTf)₃, Ln = La, Nd, Sm, and Y) to yield corresponding optically active polymers. Among these Lewis acids, Y(OTf)₃ was found to be most effective for increasing the isotactic specificity during the radical polymerizations when using n‐butanol as solvent. Also, the effect of the Lewis acids was significantly influenced by the ratio of Ln(OTf)₃ to monomer. The relationship of both chiroptical property and the chiral recognition with the stereoregularity was then examined for the resulting polymers having various tacticity by spectroscopic techniques such as NMR, fluorescence, and circular dichroism. The results indicated that the polymers rich in isotacticity exhibited a favorable enantioselective discrimination ability toward 1,1′‐bi‐2‐naphthol as evidenced by ¹H NMR study, where the characteristic hydroxyl proton signal was split into two peaks that ascribed respectively to the levo‐ and dextro‐isomer; furthermore, the splitting magnitude was linearly correlated with the diad isotacticity of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Cationic ring‐opening polymerization behavior of a five‐membered cyclic thiocarbonate having a spiro‐linked adamantane moiety

This work deals with the synthesis and cationic ring‐opening polymerization behavior of a novel five‐membered cyclic thiocarbonate bearing a spiro‐linked adamantane moiety, tricyclo[3.3.1.1^3,7]decane‐2‐spiro‐4′‐(1′,3′‐dioxolane‐2′‐thione) ( TC2 ). The cationic ring‐opening polymerization of TC2 did not proceed with trifluoromethanesulfonic acid, methyl trifluoromethanesulfonate, triethyloxonium tetrafluoroborate (Et₃OBF₄), boron trifluoride etherate (BF₃OEt₂), titanium tetrachloride, or methyl iodide as the initiator, presumably because of the steric hindrance of the adamantane moiety. However, the cationic ring‐opening copolymerization of TC2 with five‐ or six‐membered cyclic thiocarbonates, that is, 1,3‐dioxolane‐2‐thione, 1,3‐dioxane‐2‐thione, 5‐methyl‐1,3‐dioxane‐2‐thione, or 5,5‐dimethyl‐1,3‐dioxane‐2‐thione, initiated by BF₃OEt₂ or Et₃OBF₄, proceeded to afford the corresponding copolymer via a selective ring‐opening direction. The increase in the feed ratio of TC2 in the copolymerization increased the unit ratio derived from TC2 in the copolymer; however, the molecular weight of the copolymer decreased. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 699–707, 2003     

Synthesis and characterization of new soluble cardo polyamide‐imides containing cyclododecyl groups

A new cardo diimide‐dicarboxylic acid, 1,1‐bis[4‐(4‐trimellitimidophenoxy)phenyl]cyclododecane (BTPCD), containing a pendant cyclododecyl group was synthesized by the condensation reaction of 1,1‐bis[4‐(4‐aminophenoxy)phenyl]cyclododecane with trimellitic anhydride in glacial acetic acid. A series of new cardo polyamide‐imides were prepared by the direct polycondensation of BTPCD and various aromatic diamines in N‐methyl‐2‐pyrrolidinone (NMP) with triphenyl phosphite and pyridine as condensing agents. The polymers were produced in high yields and with moderate‐to‐high inherent viscosities of 0.72–1.02 dL g⁻¹. The number‐average and weight‐average molecular weights of the polymers ranged from 21,000 to 49,000 and 58,000 to 92,000, respectively. All the polymers exhibited excellent solubility and could be readily dissolved in various solvents such as NMP, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethyl sulfoxide, pyridine, cyclohexanone, and tetrahydrofuran. These polyamide‐imides had glass‐transition temperatures between 241 and 262 °C and 10% weight‐loss temperatures ranging from 469 to 511 °C in nitrogen. The polymer films had a tensile strength range of 79–108 MPa, an elongation at break range of 7–14%, and a tensile modulus range of 2.0–2.4 GPa. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2787–2793, 2000     

Isomerization polymerization of alkyl glycidyl carbonates to produce novel poly(orthocarbonate)s

The isomerization polymerization of three alkyl glycidyl carbonates (4), i.e., glycidyl methyl carbonate (4a), ethyl glycidyl carbonate (4b), and glycidyl propyl carbonate (4c), catalyzed by methylaluminum bis(2,6‐di‐t‐butyl‐4‐methylphenoxide) (3) to afford novel poly(orthocarbonate)s, poly[(2‐alkoxy‐1,3‐dioxolane‐2,4‐diyl)oxymethylene]s (5a–c), is described. The polymerization proceeded best at around room temperature and gave 5 having several thousands of M_n. As the alkoxy chain of 4 was lengthened, the polymer yield decreased, while the polymer molecular weight increased. The yields of 5b and 5c, however, were improved by increasing the feed ratio of 3 to 4 from 0.04 to 0.10. The reactivity of 4 was discussed in relation to that of glycidyl alkanoates (1). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 445–453, 1999 (See graphics.)     

Synthesis and properties of photoluminescent polymers bearing electron‐facilitating oxadiazole derivative side groups

Poly(p‐divinylene phenylene) derivatives bearing fluorene and carbazole units in the main chain and 5‐phenyl‐1,3,4‐oxadiazole moieties as side groups were prepared by the polycondensation of a newly synthesized monomer, [2‐(5′‐phenyl‐1′,3′,4′‐oxadiazole‐2′‐yl)‐1,4‐xylylene]bis(triphenyl phosphonium bromide) (OXAD), with 9,9‐dibutylfluorene‐2,2′‐dicarbaldehyde (DBFDA) and 9‐(2‐ethylhexyl)carbazole‐3,6‐dicarbaldehyde (EHCDA), which gave DBFDA–OXAD and EHCDA–OXAD. Analogues of these polymers without the side groups were also synthesized by the reaction of 1,4‐xylene bis(triphenyl phosphonium bromide) (PXYL) with the dicarbaldehydes, which gave DBFDA–PXYL and EHCDA–PXYL. All the synthesized polymers are soluble in organic solvents, giving films of good quality. The polymers are stable beyond 375 °C. They emit blue and blue‐green light, and their quantum yields are 38–79% in solution and 1–24% in film, depending on the fluorene and carbazole units as well as the side groups. In particular, the OXAD‐based polymers contain hole‐facilitating backbones and electron‐facilitating side groups, perhaps allowing these polymers to transport both holes and electrons. Overall, the synthesized polymers are potential candidates for the fabrication of light‐emitting devices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1173–1183, 2002     

Organoaluminum‐mediated polymerization of diazoketones

Polymerization of diazoketones mediated by organoaluminum compounds was investigated. Trialkylaluminum R₃Al (R = iBu, Et, Me) and diisobutylaluminum hydride (DIBAL) polymerized (E)‐1‐diazo‐3‐nonen‐2‐one ( 1 ) to give polymers with M_n = 2000–3500, which contained nearly 33 mol % of azo group (? N?N? ) along with the dominant acylmethylene unit in the main chain. On the other hand, when (E)‐1‐diazo‐4‐phenyl‐3‐buten‐2‐one ( 2 ) was used as a monomer for the organoaluminum‐mediated polymerization, the resulting polymers had ethylidene (? CH[CH₃]? ) units in the main chain along with acylmethylene and azo group, as a result of reductive cleavage of the acyl group during the polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5209–5214, 2007     

Studies on the odd‐even effect of methylene spacers in poly(pyromellitimide‐ester)s

Three series of poly(pyromellitimide‐ester)s were synthesized from various N,N′‐bis(ω‐hydroxyalkyl)pyromellitimides (HAPMIs) by melt condensation with dicarboxylic acids, including terephthalic acid (TPA), 4,4′‐biphenyldicarboxylic acid (BPDA), and 4,4′‐azobenzenedicarboxylic acid (ABDA). Polymers were characterized by elemental analysis, solubility, inherent viscosity, spectra (IR, ¹H‐NMR, ¹³C‐NMR), and X‐ray diffraction (XRD). Thermal stability and phase transition behaviour were evaluated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and hot‐stage optical polarized microscopy (HOPM). The d‐spacings, calculated from XRD data, showed an odd‐even effect with varying numbers of methylene spacers. Crystallinity of polymers decreased in the following order: azobenzene > biphenyl > phenyl polymers. Similarly, DSC‐obtained melting temperatures (T_m's) showed an odd‐even effect, and glass transition temperatures (T_g's) decreased with increasing numbers of methylene spacers. Thermal stability decreased as methylene chain length increased. Thermal stability of polymers occurred in the following order: phenyl > biphenyl > azobenzene polymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1755–1761, 1999     

Relaxation behavior of acrylate and methacrylate polymers containing dioxacyclopentane rings in the side chains

The synthesis of poly[(2,2‐dimethyl‐1,3‐dioxolan‐4‐yl) methyl acrylate)] (PACGA) and poly[(2,2‐dimethyl‐1,3‐dioxolan‐4‐yl) methyl methacrylate] (PMCGA) is reported. Both polymers present dielectric and mechanical β subglass absorptions at −128 and −115 °C, respectively, at 1 Hz, followed by ostensible glass–rubber or α relaxations centered in the vicinity of 0 and 67 °C, respectively, at the same frequency. The values of the activation energy of both the mechanical and dielectric β absorptions lie in the vicinity of 10 kcal mol⁻¹. The critical interpretation of the relaxation behavior of PMCGA suggests that dipolar intramolecular correlations play a dominant role in the response of the polymer to an electric field. The subglass relaxations of PACGA and PMCGA are further compared with the relaxation behavior of poly(1,3‐dioxane acrylate), poly(1,3‐dioxane methacrylate), and other polymers in the glassy state. The strong conductive processes observed in PMCGA at low frequencies and high temperatures were studied under the assumption that that these processes arise from Maxwell–Wagner–Sillars effects occurring in the bulk combined with Nernst–Planckian electrodynamic effects caused by interfacial polarization in the films. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 286–299, 2001