Development and application of latent hydrosilylation catalysts [2]—Control of catalytic activity of platinum catalyst by polystyrene derivatives having propargyl moieties

A new thermal latent hydrosilylation catalyst on the basis of H₂PtCl₆ and polystyrene derivatives having propargyl moieties is described. The polystyrene derivatives having various propargyl moieties were obtained by the reaction of propargyl alcohols with poly(p‐chloromethylstyrene) or its copolymer with styrene. The polymer‐supported platinum catalysts were prepared by aging H₂PtCl₆ with these polymers in tetrahydrofuran at 30 °C for 12 h. In the presence of the polymers, the hydrosilylation activity of H₂PtCl₆ was found to be controlled thermally in the model reaction of trimethylsilane and triethylvinylsilane. Effective control of the crosslinking reaction of silicone resin was also achieved by using these latent catalyst systems. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 35–42, 2000     

Asymmetric hydrogenation of salicyl alcohol catalyzed by methylsulfo–sodium carboxymethylcellulose–Pt complex

A new chiral polymer–metal complex, methylsulfo–sodium carboxymethyl–cellulose–Pt complex (MS‐NaCMC‐Pt), has been prepared by the reaction of sodium carboxymethylcellulose with methylsulfonyl chloride and H₂PtCl₆·6H₂, which was found to be able to catalyze the asymmetric hydrogenation of salicyl alcohol to give (1S,2S)‐2‐(hydroxymethyl)‐cyclohexanol at 28 °C and under 1 atm H₂, in > 90% product and optical yields, respectively. The catalyst could be reused many times without any remarkable changes in optical catalytic activity. Copyright © 2000 John Wiley & Sons, Ltd.     

Synthesis and characterization of high molecular weight atactic polybutene‐1 with a monotitanocene/methylaluminoxane catalyst system

A novel catalyst precursor, the monotitanocene (η⁵‐pentamethylcyclopentadienyl) titanium tricinnamyloxide [Cp*Ti(OCH₂? CH?CHC₆H₅)₃], was synthesized and employed for butene‐1 polymerization in the presence of methylaluminoxane. The effects of the polymerization conditions on the catalytic activity, molecular weight, stereoregularity, and regioregularity of the polymer so obtained were investigated in detail. The results show that the monotitanocene is desirable for the production of atactic polybutene‐1 coupled with good yields under typical polymerization conditions, high molecular weight (weight‐average molecular weight = 5.3–9.6 × 10⁵), and stereoirregularity with the Bernoullian factor B equal to 0.95, which indicates that chain‐end control is predominant. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4068–4073, 2001     

Polymerization of higher α‐olefins using a Cs‐symmetry hafnium metallocene catalyst. Kinetics of the polymerization and microstructural analysis

The C_s‐symmetry hafnium metallocene [(p‐Et₃Si)C₆H₄]₂C(2,7‐di‐tert‐BuFlu)(C₅H₄)Hf(CH₃)₂ and tetrakis(pentafluorophenyl) borate dimethylanilinium salt ([B(C₆F₅)₄]^?[Me₂NHPh]⁺) were used as the catalytic system for the polymerization of higher α‐olefins (from hexene‐1 to hexadecene‐1) in toluene at 0 °C. The evolution of the polymerization was studied regarding the variation of the molecular weight, molecular weight distribution and yield with time. The effect of the monomer structure on the polymerization kinetics was established. The role of trioctylaluminum in accelerating the polymerization was investigated. ¹³C NMR spectroscopy was used to study the microstructure of the poly(α‐olefins) by the determination of the pentad monomer sequences. The thermal properties of the polymers were obtained by differential scanning calorimetry, DSC. The results were discussed in connection with the polymer microstructure. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4314–4325, 2009     

Control of molecular weight in polymerization of vinyl chloride with Cp*Ti(OPh)3/MAO catalyst

Polymerization of vinyl chloride (VC) with titanium complexes containing Ti‐OPh bond in combination with methylaluminoxane (MAO) catalysts was investigated. Among the titanium complexes examined, Cp*Ti(OPh)₃/MAO catalyst (Cp*; pentamethylcyclopentadienyl, Ph; C₆H₅) gave the highest activity for the polymerization of VC, but the polymerization rate was slow. From the kinetic study on the polymerization of VC with Cp*Ti(OPh)₃/MAO catalyst, the relationship between the M_n of the polymer and the polymer yields gave a straight line, and the line passed through the origin. The M_w/M_n values of the polymer gradually decrease as a function of polymer yields, but the M_w/M_n values were somewhat broad. This may be explained by a slow initiation in the polymerization of VC with Cp*Ti(OPh)₃/MAO catalyst. The results obtained in this study demonstrate that the molecular weight control of the polymers is possible in the polymerization of VC with the Cp*Ti(OPh)₃/MAO catalyst. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3872–3876, 2007     

Transition metal nanoparticles protected by amphiphilic block copolymers as tailored catalyst systems

 Several stable palladium, platinum, silver, and gold colloids were prepared by reducing the corresponding metal precursors in the presence of protective amphiphilic block copolymers. Some palladium and platinum precursors with different hydrophobicities, namely palladium chloride PdCl₂, palladium acetate Pd (CH₃COO)₂, hexachloroplatinic acid H₂PtCl₆, and platinum acetylacetonate Pt (CH₃COCH=C(O–)CH₃)₂, have been used in order to investigate differences in their catalytic activity. The polymers investigated for their ability to stabilize such transition metal colloids were polystyrene-b-poly(ethylene oxide) and polystyrene-b-poly(methacrylic acid). The metal particle sizes and morphologies were determined by transmission electron microscopy and found to be in the M28.8nnanometer range. The catalytic activity of the palladium and platinum colloids was tested by the hydrogenation of cyclohexene as a model reaction. The protected palladium and platinum nanoparticles were found to be catalytically active, and final conversions up to 100% cyclohexane could be obtained. Depending on the choice of polymer block types and lengths, the precursor type, and the reduction method, different nanoparticle morphologies and catalytic activities could be obtained. These novel catalytically active metal–polymer systems are thus promising candidates for the development of tailored catalyst systems. Received: 10 June 1996 Accepted: 30 October 1996     

A green epoxidation system with poly(4‐vinylpyridine) microsphere‐supported molybdenum catalyst

The immobilization of molybdenum (Mo) compounds on poly(4‐vinylpyridine) (P4VP) microspheres for catalytic epoxidation was reported. P4VP‐supported Mo compounds were highly efficient and selective for the epoxidation of cis‐cyclooctene using hydrogen peroxide (H₂O₂) as oxygen source. When ethanol was used as solvents, outstanding catalytic activity and selectivity were observed for Mo‐containing catalysts in the epoxidation of cis‐cyclooctene. A completely green epoxidation system based on H₂O₂ and cleaner solvent has been achieved, and the heterogenized Mo catalyst can be recovered for five times without loss of its activity. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 558–562, 2010     

Polymerization of methyl methacrylate using a metallocene catalyst system

Methyl methacrylate was polymerized with Cp₂YCl(THF) or IVB group metallocene compounds (i.e., Cp₂ZrCl₂ and Cp₂HfCl₂, etc.), in the presence of a Lewis acid like Zn(C₂H₅)₂. The Lewis acid was complexed with methyl methacrylate, which avoided the metallocene compounds being poisoned with a functional group. A living polymerization was promoted through the use of metallocene/MAO/Zn(C₂H₅)₂, which gave tactic poly(methyl methacrylate) with a high molecular weight. The polymer yield increases with polymerization time, which indicates that the propagation rate is zero in order in the concentration of the monomer. The polymer yield increases also with the concentration of Cp₂YCl(THF), which indicates the yttrocene to be the real catalyst. When the polymerization temperature exceeds room temperature, the poly(methyl methacrylate) cannot be synthesized by the Cp₂YCl(THF) catalyst. When the reaction temperature reachs −60 °C, the poly(methyl methacrylate) is high syndiotatic and molecular weight by the Cp₂YCl(THF)/MAO catalyst system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1184–1194, 2000     

Comparisons between cationic polyelectrolytes and nonionic polymers for the protection of palladium and platinum nanocatalysts

Several palladium and platinum nanocatalysts protected by cationic polyelectrolytes were prepared by the in-situ reduction of palladium chloride, PdCl₂, and dihydrogen hexachloroplatinate, H₂PtCl₆. The particle sizes and size distributions were determined by transmission electron microscopy, and the colloids were further characterized by UV-vis spectroscopy. The catalytic activity of these nanoparticles was qualitatively investigated by the hydrogenation and conversion of cyclohexene as a model reaction and compared to palladium and platinum colloids protected by a selection of water-soluble, nonionic polymers. The results show that the catalytic activity is strongly influenced by the protective polymer chosen, as well as particle size and morphology. The use of cationic polyelectrolytes decreases the catalytic activities significantly, in comparison to several water-soluble, nonionic polymers investigated. The effects depend strongly on the particular metal, as illustrated in this case by differences observed between palladium and platinum. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3151–3160, 1997     

Isothermal cure kinetics of epoxy/phenol‐novolac resin blend system initiated by cationic latent thermal catalyst

The investigation of the cure kinetics of a diglycidyl ether of bisphenol A (DGEBA)/phenol‐novolac blend system with different phenolic contents initiated by a cationic latent thermal catalyst [N‐benzylpyrazinium hexafluoroantimonate (BPH)] was performed by means of the analysis of isothermal experiments using a differential scanning calorimetry (DSC). Latent properties were investigated by measuring the conversion as a function of curing temperature using a dynamic DSC method. The results indicated that the BPH in this system for cure is a significant thermal latent initiator and has good latent thermal properties. The cure reaction of the blend system using BPH as a curing agent was strongly dependent on the cure temperature and proceeded through an autocatalytic kinetic mechanism that was accelerated by the hydroxyl group produced through the reaction between DGEBA and BPH. At a specific conversion region, once vitrification took place, the cure reaction of the epoxy/phenol‐novolac/BPH blend system was controlled by a diffusion‐control cure reaction rather than by an autocatalytic reaction. The kinetic constants k₁ and k₂ and the cure activation energies E₁ and E₂ obtained by the Arrhenius temperature dependence equation of the epoxy/phenol‐novolac/BPH blend system were mainly discussed as increasing the content of the phenol‐novolac resin to the epoxy neat resin. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2945–2956, 2000     

Cobalt‐catalyzed alternating and nonalternating copolymerization of carbon monoxide with aziridine

Catalysts CH₃COCo(CO)₃PPh₃ ( 1 ) and HCo(CO)₃PPh₃ ( 2 ) catalyze the copolymerization of aziridine and carbon monoxide. Catalyst 2 can be conveniently generated in situ via reaction of Na⁺Co(CO)₄, N,N‐dimethylanilinium chloride, and PPh₃. The copolymerization alternates at high catalyst loadings to produce poly(β‐alanine). The end groups of the poly(β‐alanine) product are characterized by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry and by comparison of the ¹H NMR spectra of the polymer and a stepwise synthesized model compound. At low catalyst loadings, the polymer product contains both the β‐alanine units and amine units because of nonalternating enchainment of the comonomers. The characterization of the amine units is again supported by comparison of the ¹H NMR spectra of the polymers and the stepwise synthesized model compounds. The molecular weights of the polymers are determined by gel permeation chromatography. The thermal stability of the polymers is probed by differential scanning calorimetry and thermogravimetric analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 376–385, 2003     

Ring‐opening metathesis polymerization of functionalized cyclooctene by a ruthenium‐based catalyst in ionic liquid

This paper describes the synthesis of a novel monomer of 5‐substituted cyclooctene with the pendant of imidazolium salt (7) and the ring‐opening metathesis polymerization of the functionalized cyclooctenes ( 4 and 7 ) in CH₂Cl₂ and ionic liquid [bmim][PF₆] by a ruthenium‐based catalyst RuCl₂(PCy₃)(SIMes)(CHPh) (2). The polymerization, which was carried out in ionic liquid, afforded improved control over the molecular weight (M_n) and polydispersity of the resultant products (PDI <1.4). Furthermore, to facilitate the GPC measurement for molecular weight of polymers, the charged polymers (poly‐ 7 ) were hydrolyzed to give uncharged polymers (poly‐ 4 *) by removing the imidazolium pendant from the polymer chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3986–3993, 2007     

Atom transfer radical polymerization of methyl methacrylate catalyzed by cobalt catalyst system

A new catalyst system, CoCl₂/tris(2‐(dimethyl amino) ethyl)amine (Me₆ TREN), was used to catalyze the polymerization of methyl methacrylate (MMA) successfully through atom transfer radical polymerization mechanism. The control over the polymerization was not ideal, the molecular weight distribution of the resulting polymer (PMMA) was relatively broad (M_w/M_n = 1.63–1.80). To improve its controllability, a small amount of hybrid deactivator (FeBr₃/Me₆TREN or CuBr₂/Me₆TREN) was added in the cobalt catalyst system. The results showed that the level of control over the polymerization was significantly improved with the hybrid cobalt–iron (or cobalt–copper) catalyst system; the polydispersity index of the resulting polymer was reduced to a low level (M_w/M_n = 1.15–1.46). Furthermore, with the hybrid cobalt–iron catalyst, the dependence of the propagation rate on the temperature and the copolymerization of methacrylate (MA) with PMMA‐Br as macroinitiator were also investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5207–5216, 2005     

Near‐infrared spectroscopic studies on the cure behaviors of the CAE/DGEBA blend system initiated by a thermal latent catalyst

The latent properties and cure behaviors of an epoxy blend system based on cycloaliphatic epoxy (CAE) and diglycidyl ether of bisphenol A (DGEBA) epoxy containing N‐benzylpyrazinium hexafluoroantimonate (BPH) as a thermal latent initiator were investigated with near‐infrared (N‐IR) spectroscopy. The assignments of the latent properties and cure kinetics were performed by the measurements of the N‐IR reflectance for epoxide and hydroxyl functional groups at different temperatures and compositions. As a result, this system showed more than one type of reaction, and BPH was an excellent thermal latent catalyst without any coinitiator. The cure behaviors were identified by the changes in the absorption intensity of the hydroxyl groups at 7100 cm⁻¹ with different composition ratios. Moreover, characteristic N‐IR band assignments were used to evaluate the reactive kinetics and were shown to be an appropriate method for studying the cure behaviors of the CAE/DGEBA blend system containing a thermal latent catalyst. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 326–331, 2001     

Homogeneous radical polymerization of 2‐hydroxyethyl methacrylate mediated by cyclometalated cationic Ruthenium(II) complexes with PF6− and Cl− in protic media

Cationic coordinatively saturated complexes of ruthenium(II), [Ru(o‐C₆H₄‐2‐py)(phen)(MeCN)₂]⁺, bearing different counterions of PF₆^? and Cl^? have been used in the radical polymerization of 2‐hydroxyethyl methacrylate in protic media and acetone under homogeneous conditions. Exchange of PF₆^? by Cl^? increases the solubility of the complex in water. Both complexes led to the fast polymerization under mild conditions, but control was achieved only in methanol and acetone and was better for the complex with Cl^?. The polymerization accelerated in aqueous media and proceeded to a high conversion even with a monomer/catalyst = 2000/1, but without control. Polymerization mediated by complex bearing Cl^? was slower in protic solvents but faster in acetone and always resulted in lower molecular weight polymers. Thus, the nature of the anion strongly affected the catalytic activity of the complexes and may serve as way of fine‐tuning the catalytic properties. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,characterization, and properties of polyurethanes containing 1,4:3,6‐dianhydro‐D‐sorbitol

Two‐ and three‐component polyurethanes containing 1,4:3,6‐dianhydro‐D ‐sorbitol (isosorbide) derived from glucose were synthesized using n‐BuSn(?O)OH·H₂O as a catalyst, and the thermal properties (T_g, T_d) of the polymers were investigated by differential scanning calorimetry and thermogravimetric analysis. We carried out molds for polyurethanes, the molds of polyurethanes were obtained. The dynamic mechanical analyzes showed that the storage modulus values of the three‐component polymers were constant to a higher temperature than those of the two‐component polymers. The storage moduli (E′), loss moduli (E″), and values of tan δ for the polymers were obtained. The rigidity of three‐component polymers was increased by the introduction of bisphenol A and diphenylmethane group to two‐component polymer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6025–6031, 2009     

Synthesis of porphyrin‐end‐functionalized polycyclohexane with well‐controlled and defined polymer chain structure

Tetraphenylporphyrin‐end‐functionalized polycyclohexane (H₂TPP‐PCHE) and its metal complexes (MTPP‐PCHE) were synthesized as the first successful example of porphyrin‐end‐functionalized transparent and stable polymers with a well‐controlled and defined polymer chain structure. Chloromethyl‐end‐functionalized poly(1,3‐cyclohexadiene) (CM‐PCHD) was synthesized as prerequisite prepolymer by the postpolymerization reaction of poly(1,3‐cyclohexadienyl)lithium and chloro(chloromethyl)dimethylsilane. CM‐end‐functionalized PCHE (CM‐PCHE) was prepared by the complete hydrogenation of CM‐PCHD with p‐toluenesulfonyl hydrazide. H₂TPP was incorporated onto the polymer chain end by the addition of 5‐(4‐hydroxyphenyl)‐10,15,20‐triphenylporphyrin to CM‐PCHE. The complexation of H₂TPP‐PCHE and Zn(OAc)₂ (or PtCl₂) yielded a zinc (or platinum) complex of H₂TPP‐PCHE. H₂TPP‐PCHE and MTPP‐PCHE were readily soluble in common organic solvents, and PCHE did not inhibit the optical properties of the H₂TPP, ZnTPP, and PtTPP end groups. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Eutectic mixtures as a green alternative for efficient catalyst recycling in atom transfer radical polymerizations

A new solvent mixture, based on ethanol/reline (EM: eutectic mixture), was investigated for the supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of methyl acrylate (MA) near room temperature, for the first time, affording complete catalyst recovery and reuse. The kinetic results revealed that the polymerizations were controlled, with polymers having narrow molecular weight distributions (? < 1.2). The “living” character of the resultant PMA was confirmed by the synthesis of a well‐defined PMA‐b‐PBA block copolymer. Remarkably, it was demonstrated that the Cu(0)/CuBr₂/Me₆TREN (Me₆TREN: tris[2‐(dimethylamino)ethyl]amine) could be recovered from the final reaction mixture and reused for new successful SARA ATRP of MA, suggesting that the reported system could be very attractive from both the economic and environmental perspectives. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 371–381     

Novel cyclohexyl‐substituted salicylaldiminato–nickel(II) complex as a catalyst for ethylene homopolymerization and copolymerization

The cyclohexyl‐substituted salicylaldiminato–Ni(II) complex [O? (3‐C₆H₁₁)(5‐CH₃)C₆H₂CH?N‐2,6‐C₆H₃ⁱPr₂]Ni(PPh₃)(Ph) ( 4 ) has been synthesized and characterized with ¹H NMR and X‐ray structure analysis. In the presence of phosphine scavengers such as bis(1,5‐cyclooctadiene)nickel(0) [Ni(COD)₂], triisobutylaluminum (TIBA), and triethylaluminum (TEA), 4 is an active catalyst for ethylene polymerization and copolymerization with the polar monomers tert‐butyl‐10‐undecenoate, methyl‐10‐undecenoate, and 4‐penten‐1‐ol under mild conditions. The polymerization parameters affecting the catalytic activity and viscosity‐average molecular weight of polyethylene, such as the temperature, time, ethylene pressure, and catalyst concentration, are discussed. A polymerization activity of 3.62 × 10⁵ g of PE (mol of Ni h)^?1 and a weight‐average molecular weight of polyethylene of 5.73 × 10⁴ g^.mol^?1 have been found for 10 μmol of 4 and a Ni(COD)₂/ 4 ratio of 3 in a 30‐mL toluene solution at 45 °C and 12 × 10⁵ Pa of ethylene for 20 min. The polydispersity index of the resulting polyethylene is about 2.04. After the addition of tetrahydrofuran and Et₂O to the reaction system, 4 exhibits still high activity for ethylene polymerization. Methyl‐10‐undecenoate (0.65 mol %), 0.74 mol % tert‐butyl‐10‐undecenoate, and 0.98 mol % 4‐penten‐1‐ol have been incorporated into the polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6071–6080, 2004     

Ethylene polymerization and ethylene/hexene copolymerization with vanadium(III) catalysts bearing heteroatom‐containing salicylaldiminato ligands

A series of novel vanadium(III) complexes bearing heteroatom‐containing group‐substituted salicylaldiminato ligands [RN?CH(ArO)]VCl₂(THF)₂ (Ar = C₆H₄, R = C₃H₂NS, 2a ; C₇H₄NS, 2c ; C₇H₅N₂, 2d ; Ar = C₆H₂tBu₂ (2,4), R = C₃H₂NS, 2b ) have been synthesized and characterized. Structure of complex 2c was further confirmed by X‐ray crystallographic analysis. The complexes were investigated as the catalysts for ethylene polymerization in the presence of Et₂AlCl. Complexes 2a–d exhibited high catalytic activities (up to 22.8 kg polyethylene/mmol_V h bar), and affording polymer with unimodal molecular weight distributions at 25–70 °C in the first 5‐min polymerization, whereas produced bimodal molecular weight distribution polymers at 70 °C when polymerization time prolonged to 30 min. The catalyst structure plays an important role in controlling the molecular weight and molecular weight distribution of the resultant polymers produced in 30 min polymerization. In addition, ethylene/hexene copolymerizations with catalysts 2a–d were also explored in the presence of Et₂AlCl, which leads to the high molecular weight and unimodal distributions copolymers with high comonomer incorporation. Catalytic activity, comonomer incorporation, and polymer molecular weight can be controlled over a wide range by the variation of catalyst structure and the reaction parameters, such as comonomer feed concentration, polymerization time, and polymerization reaction temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3573–3582, 2009