Reversible nonlinear conduction behavior for high‐density polyethylene/graphite powder composites near the percolation threshold

The reversible nonlinear conduction (RNC) behavior of high‐density polyethylene/graphite powder composites with various graphite powder volume concentrations slightly above the threshold has been studied. The relationships between the current density (J) and electric field (E) of the composites, as shown in J(E) curves, can be well described by the scaling functions of J/J_c ～ (E/E_c) when E < E_c and J/J_c ～ (E/E_c) when E > E_c, where J_c is the crossover current density and E_c is the crossover electric field. The results indicate that J_c scales with the linear conductivity σ₀ as J_c ～ σ. It is believed that the macroscopic RNC is a combined result of the microscopic conduction processes, involving electronic transporting along carbon chains and tunneling or hopping across thin polymer bridges. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2833–2842, 2001     

Structural analysis of aggregates formed by a thermoresponsive homopolymer in dilute aqueous solutions

The aqueous solution of a thermoresponsive polymer, poly[2‐(2‐ethoxy) ethoxyethyl vinyl ether] poly(EOEOVE), contains a tiny amount of large polymer aggregates at low polymer concentrations far below the lower critical solution temperature (～40 °C). The molar mass M_w,slow, radius of gyration 〈S²〉, and hydrodynamic radius R_H,slow of the aggregating component of poly(EOEOVE) were obtained by simultaneous static and dynamic light scattering as functions of the polymer concentration and temperature, while the weight fraction w_slow of the component was estimated by size‐exclusion chromatography. The M_w,slow dependencies of 〈S²〉 and R_H,slow, as well as the ratio 〈S²〉/R_H,slow, indicated that the poly(EOEOVE) aggregate takes a sparsely branched polymer‐like conformation. We have analyzed the structure of the aggregate, using the branched polymer model of random type. The M_w,slow dependence of 〈S²〉 obtained was favorably compared with this model with reasonable structural parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1179–1187, 2006     

The effect of water content on the ultimate properties of rubbery nanocomposite gels

An investigation was conducted into the effects of water content (R) on the ultimate tensile properties of nanocomposite hydrogels (NC gels) based on poly(N‐isopropylacrylamide)/clay networks. Rubbery NC gels with low clay contents (<NC10) exhibited unique changes in their stress–strain curves, depending on the R. At high R, where PNIPA chains are fully hydrated, NC gels retained their rubbery tensile properties, whereas they changed to exhibit plastic‐like deformations with decreasing R. Consequently, for a series of NC gels with different R, a failure envelope was obtained by connecting the rupture points in the stress–strain curves. Here, the counterclockwise movement was observed as either the R decreased or the strain rate increased. This seemed to be analogous to that of a conventional elastomer (e.g., SBR), although the mechanisms are different in the two cases. From the R and C_clay dependences of the ultimate properties, three critical values of R were defined, where R showed a maximum strain at break, a steep increase in initial modulus, and onset of brittle fracture. Compared with NC gels, OR gels (chemically crosslinked hydrogels) showed similar but very small changes in their stress–strain curves on altering R, whereas LR (viscous PNIPA solution) showed a monotonic decrease (increase) in ε_b (E_i) with decreasing R. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2328–2340, 2009     

Entanglement friction and dynamics in blends of starlike and linear polymer molecules

We investigate relaxation dynamics in a series of six‐arm star/linear 1,4‐polybutadiene blends with mechanical rheometry measurements. Blend systems are formulated to systematically probe constraint release and arm relaxation dynamics. Zero shear viscosity and terminal relaxation times of star/linear polymer blends with fixed star arm molecular weights (M_a) and compositions (?_S) are found to follow nonmonotonic dependencies on the linear polymer molecular weight (M_L). At low values of ?_S, at least two scaling regimes are apparent from the data (ξ₀ ～ M and ξ₀ ～ M), where ξ₀ refers to the zero shear viscosity or terminal relaxation time of the blend. The two regimes are separated by a critical linear polymer molecular weight M^* that is more than 20 times larger than the critical molecular weight for entanglements. When the linear polymer contribution to blend properties is removed, a clear transition from dilution dynamics, ξ₀ ～ M, to Rouse‐like constraint‐release dynamics, ξ₀ ～ M, is apparent at low values of ?_S. At higher ?_S values, a new activated constraint‐release dynamic regime is evident in which ξ₀ ～ M and ξ₀ ～ ?, where α changes continuously from approximately 2 to 0.5 as ?_S increases and β varies from 2.0 to 1.0 as M_L increases. The experimental results are compared with theoretical predictions based on a drag coupling model for entangled polymer liquids. All features observed experimentally are captured by this model, including the value of M^* for the transition from dilution to Rouse constraint‐release dynamics. Predictions of the drag coupling model are also compared with published data for the zero shear viscosity and terminal relaxation time in bidisperse linear polymer blends and pure entangled starlike molecules. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2501–2518, 2001     

A Flory–Huggins thermodynamic approach for predicting sorption equilibrium in ternary polymer systems

The Flory–Huggins theory as modified by Pouchlý has been applied to calculate preferential (λ) and total (Y) sorption coefficients for a ternary polymer system. The ternary interaction function (?₁?₂?₃G_T(u₁, ?₃)) is described as the product of three independent binary functions. This expression allows prediction of λ and Y from binary interaction parameters χ, χ, g, g, and g₁₂(?₁₀). Three ternary polymer systems are used to check the validity of the expression. Moreover for polymer systems in which the parameters g and/or g are unknown, a procedure to evaluate them has been developed and verified on systems for which sufficient experimental information is available.     

Conformation and dynamics of a self-avoiding sheet: Bond-fluctuation computer simulation

The conformation and dynamics of a self-avoiding sheet are analyzed by the bond-fluctuating Monte Carlo method. The mean-square displacement of the center of mass of the sheet and that of its center node (R) show asymptotic diffusive behavior. The segmental dynamics in short and long time regimes can be deduced from the motion of the center node described by the power law with μ ≃ 0.13 and ν ≃ ½, where C₁ and C₂ are fitting constants and t is the time. The radius of gyration, R_g, scales with the linear size, L_s, of the sheet as R_g ≃ N^γ with γ ≃ ½ and N = L, and this is consistent with the conformational analysis of open tethered membranes with excluded-volume constraints. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1041–1046, 2005     

Nonlinear rheology of highly entangled polymer solutions in start‐up and steady shear flow

Orientation angle and stress‐relaxation dynamics of entangled polystyrene (PS)/diethyl phthalate solutions were investigated in steady and step shear flows. Concentrated (19 vol %) solutions of 0.995, 1.81, and 3.84 million molecular weight (MW) PS and a semidilute (6.4 vol %) solution of 20.6 million MW PS were used to study the effects of entanglement loss on dynamics. A phase‐modulated flow birefringence apparatus was developed to facilitate measurements of time‐dependent changes in optical equivalents of shear stress (n₁₂ ≈ Cσ) and first normal stress differences (n₁ = n₁₁ ? n₂₂ ≈ CN₁) in a planar‐Couette shear‐flow geometry. Flow birefringence results were supplemented with cone‐and‐plate mechanical rheometry measurements to extend the range of shear rates over which entangled polymer dynamics are studied. In slow (τ > ) steady shear‐flow experiments using the ultrahigh MW polymer sample (20.6 × 10⁶ MW PS), steady‐state n₁₂ and n₁ results manifest unusual power‐law dependencies on shear rate [n_12,ss ～ ^0.4 and n_1,ss ～ ^0.8]. At shear rates in the range τ < < τ, steady‐state orientation angles χ_SS are found to be nearly independent of shear rate for all but the most weakly entangled materials investigated. For solutions containing the highest MW PS, an approximate plateau orientation angle χ_p in the range 20–24° is observed; χ_p values ranging from 14 to 16° are found for the other materials. In the start‐up of fast steady shear flow (γ˙ ≥ τ), transient undershoots in orientation angle are also reported. The molecular origins of these observations were examined with the help of a tube model theory that accommodates changes in polymer entanglement density during flow. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2275–2289, 2001     

Polymer–filler interactions in sol–gel derived polymer/silica hybrid nanocomposites

The effect of polymer–filler interaction on solvent swelling and dynamic mechanical properties of the sol–gel derived acrylic rubber (ACM)/silica, epoxidized natural rubber (ENR)/silica, and poly (vinyl alcohol) (PVA)/silica hybrid nanocomposites has been described for the first time. Tetraethoxysilane (TEOS) at three different concentrations (10, 30, and 50 wt %) was used as the precursor for in situ silica generation. Equilibrium swelling of the hybrid nanocomposites in respective solvents at ambient condition showed highest volume fraction of the polymer in the swollen gel in PVA/silica system and least in ACM/silica, with ENR/silica recording an intermediate value. The Kraus constant (C) also followed a similar trend. In dynamic mechanical analysis, the storage modulus dropped at higher strain (>1%), which indicated disengagement of polymer segments from the filler surfaces. This drop was maximum in ACM/silica, intermediate in ENR/silica, and minimum in PVA/silica, both at 50 and 70 °C. The drop in modulus with theoretical volume fraction of silica (ϕ) was interpreted with the help of a Power law model ΔE′ = a₁ϕ, where a₁ was a constant and b₁ was primarily a filler attachment parameter. Strain dependence of loss modulus was observed in ACM/silica hybrid nanocomposites, while ENR/silica and PVA/silica nanocomposites showed almost strain‐independent behavior. The storage modulus showed sharp increase with increasing frequency in ACM/silica system, while that was lower in both ENR/silica (at higher frequency) and PVA/silica systems (in the entire frequency spectrum). The increase in modulus with ϕ also followed similar model ΔE′ = a₂ϕ proposed in the strain sweep mode. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2399–2412, 2005     

Melt‐state polymer chain dimensions as a function of temperature

The unperturbed chain dimensions (〈R²〉_o/M) of cis/trans‐1,4‐polyisoprene, a near‐atactic poly(methyl methacrylate), and atactic polyolefins were measured as a function of temperature in the melt state via small‐angle neutron scattering (SANS). The polyolefinic materials were derived from polydienes or polystyrene via hydrogenation or deuteration and represent structures not encountered commercially. The parent polymers were prepared via lithium‐based anionic polymerizations in cyclohexane with, in some cases, a polymer microstructure modifier present. The polyolefins retained the near‐monodisperse molecular weight distributions exhibited by the precursor materials. The melt SANS‐based chain dimension data allowed the evaluation of the temperature coefficients [dln 〈R²〉_o/dT(κ)] for these polymers. The evaluated polymers obeyed the packing length (p)‐based expressions of the plateau modulus, G = kT/np³ (MPa), and the entanglement molecular weight, M_e = ρN_anp³ (g mol^?1), where n_t denotes the number (～21) of entanglement strands in a cube with the dimensions of the reptation tube diameter (d_t) and ρ is the chain density. The product np³ is the displaced volume (V_e) of an entanglement that is also expressible as pd or kT/G. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1768–1776, 2002     

Determination of molecular weight and its distribution of rigid‐rod polymers determined by phase‐modulated flow birefringence technique

The phase‐modulated flow birefringence (PMFB) method is widely accepted as one of the most sensitive and accurate techniques suitable for experimental tests on the molecular theory of polymer solutions. The objective of this study is to develop a systematic method to determine molecular weight and distribution of rigid‐rod polymers by the PMFB technique. Using molecular theory for rigid polymers, birefringence Δn and orientation angle χ have been expressed as a function of molecular weight and distribution. Δn has been shown to be proportional to Σc_iM, and cot 2χ turned out to have a linear relationship with Σc_iM/Σc_iM. From the experimental results for PBLG solutions, birefringence and orientation angle data were in some degree matched with the theory presented. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 509–515, 2000     

New simple method of measuring the surface glass transition temperature of polymers

A lap‐shear joint mechanical testing method has been probed to measure the surface glass transition temperature (T) of the thick bulk films of high‐molecular‐weight polymers. As T, the temperature transition “occurrence of autoadhesion–nonoccurrence of autoadhesion” has been proposed. The influence of chain flexibility, of molecular architecture, of polymer morphology, and of chain ends concentration on the T has been investigated. The correlation between the reduction in T with respect to the glass transition temperature of the bulk (T) and the intensity of the intermolecular interaction in the polymer bulk in amorphous polymers has been found. The effect of surface roughness on T has been discussed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 2012–2021, 2010     

Spin probe mobility in relation to free volume and relaxation dynamics of glass‐formers: A series of spin probes in poly(isobutylene)

We present the dynamics of a series of three paramagnetic molecules of different volume, mass, and shape in amorphous glass‐forming polymer poly(isobutylene) (PIB) as investigated by means of electron spin resonance (ESR) technique. The reorientation behavior of spin probes is related to the ortho‐positronium (o‐Ps) annihilation in PIB from positron annihilation lifetime spectroscopy (PALS) and the extracted free volume information. It is also related to the dynamic data of PIB from broadband dielectric spectroscopy (BDS), neutron scattering (NS), and nuclear magnetic resonance (NMR) spectroscopy from literature. In the case of the smallest spin probe, 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO), a discontinuous course of the spectral parameter 2A_zz′ versus T dependence was observed and the subsequent phenomenological model‐free analyses of the spectral parameter, 2A_zz′ versus T, as well as of the correlation time, τ_c, versus 1/T plots provided the characteristic ESR temperatures ( , T_50G, ) and (T, T, T). These characteristic ESR temperatures were found to be consistent with the characteristic PALS temperatures: T, T = T from temperature dependences of the mean o‐Ps lifetime, τ₃, or the width of o‐Ps lifetime distribution, σ₃, respectively. In addition, the relationships between the spin probe size, V, and the free volume hole size distributions g_n(V_h) at the characteristic ESR temperatures indicate the significant influence of the free volume fluctuation at the crossover from slow to rapid regime as well as within the rapid motional regime. On the other hand, the two larger spin probes exhibit a rather continuous 2A_zz′–T plots with the respective T_50G's lying in the vicinity of T independently of their volume, mass and shape, suggesting the common origin of underlying process controlling this T_50G transition. Finally, these mutual PALS and ESR findings were compared with the known dynamic behavior of PIB which suggest that the dynamics of the TEMPO and the larger spin probes are related to free volume fluctuation associated with primary α ‐ and secondary β processes, respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1058–1068, 2009     

A fourier-transform infrared spectroscopic study of the surface hydrolysis of polythiazyl

The hydrolysis of (SN)_x, in air at room temperature and 90% relative humidity has been studied using the attenuated total reflectance (ATR) method. Decomposition gave rise to strong bands at 3210 and 3150 cm^–1 [v₃ and v₁ (NH)], 1420 cm^–1 (v_b NH), 1220 cm^–1 (S?O), 1089 and 610 cm^–1 [v₁ and v₃ (SO)]. For the first 3 days, the decay of the 808 and 690 cm^–1 bands of (SN)_x was first order, with a half life of about 30 h. The spectroscopic data were consistent with the rapid formation of ? SO₂? NH₂ and ?S?NH chain end groups with subsequent relatively slow hydrolysis to (NH₄)₂SO₄, sulfur, and fresh hydrolysable chain ends.     

A new proposal for polymer dynamics in steady shearing flows

Beginning with a recently proposed expression for the drag force on a single macromolecule pulled with constant velocity through a fluid of long‐entangled molecules (V. R. Mhetar and L. A. Archer, Macromolecules 1998, 31, 6639), we investigate the effect of entanglement loss on polymer dynamics in steady shearing flows. At steady‐state, a balance between the elastic restoring force and viscous drag acting on entangled polymer segments reveals a critical molecular strain γ_m,c beyond which the drag force exerted on polymer molecules by their neighbors is insufficient to support arbitrarily small orientation angles. Specifically, we find that in fast steady shear flows τ < γ˙ < τ, polymer orientation in the shear plane approaches a limiting angle χ_c ≈ atau(1/(1 + γ_m,c)) beyond which flow becomes incapable of producing further molecular alignment. Shear flow experiments using a series of concentrated polystyrene/diethyl phthalate solutions with fixed entanglement spacing, but variable polymer molecular weight 0.94 × 10⁶ ≤ M_w ≤ 5.48 × 10⁶, reveal a limiting steady‐state orientation angle between 6° and 9° over a range of shear rates; confirming the theoretical result. Orientation angle undershoots observed during start‐up of fast steady shearing flows are also explained in terms of a transient imbalance of elastic restoring force and viscous drag on oriented polymer molecules. Our findings suggest that the Doi–Edwards affine orientation tensor (Q) is not universal, but rather depends on deformation type and deformation history through a balance of elastic force and viscous drag on polymer molecules. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 222–233, 2000     

Interaction parameters of crystalline/crystalline polypropylene/poly(butene‐1) blends: Effect of molecular fractionation

Compatibility of crystalline/crystalline polypropylene (PP)/poly(butene‐1) (PB‐1) blends was investigated via the method of equilibrium melting temperature depression followed by determining the polymer–polymer interaction parameter (χ) using the Nishi–Wang equation. The composition variation of the equilibrium melting temperatures of blends (T) was determined with the Hoffman–Weeks plot. The T and its variation with the blend composition depended on the crystallization temperature range. The morphological effect of the blend composition was not a contribution factor for the T depressions of PP and PB‐1 in the blends. The interplay of the dilution effect and molecular fractionation effect of the amorphous component on crystallization of the crystalline component in the blends governed the relation of T with the blend composition. The calculated χ values were negative depending on the blend composition. The negative χ values suggested that PP and PB‐1 in the amorphous region were compatible. The composition variation of the χ values was attributed to the molecular fractionation effect during crystallization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 638–648, 2002; DOI 10.1002/polb.10125     

Preparation of exfoliated polyacrylic clay nanocomposites with high loading: An investigation into the intercalation of ammonium‐terminated polyacrylic acid and polyacrylates

Low‐molecular‐weight polyacrylic acid with amine chain end used as a macromolecular intercalating agent was synthesized by radical polymerization using 2‐aminoethanethiol hydrochloride as chain transfer agent. Three polyacrylates (sodium polyacrylate‐t‐NH, calcium polyacrylate‐t‐NH, and zinc polyacrylate‐t‐NH) were prepared by neutralization from this polyacrylic acid using sodium hydroxide, zinc oxide, and calcium hydroxide as alkalies. The intercalation of ammonium‐terminated polyacrylic acid and polyacrylate was investigated by viscosity measurement, XRD, and TEM. Using this ammonium‐terminated polyacrylic acid as the intercalating agent, exfoliated polyacrylic acid/clay and polyacrylate/clay composites with a clay loading of ～30 and 20 wt %, respectively, were prepared through the evaporation of solvent from their clay suspensions. The thermal degradation of polyacrylic acid/clay and polyacrylate/clay composites was also studied by TGA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2335–2340, 2008     

Crystallization studies of poly(trimethylene terephthalate) using thermal analysis and far‐infrared spectroscopy

Crystallization of poly(trimethylene terephthalate) (PTT) by annealing was examined using density measurement, differential scanning calorimetry, and far‐infrared spectroscopy (FIR). Crystallinity, measured by density, increased slowly up to the T_a of 185 °C and increases rapidly once T_a exceeds 185 °C. It was found that thermally induced crystallization is mainly temperature‐dependent above T_a = 185 °C and temperature‐ and time‐dependent below T_a = 60 °C. Two melting transitions, T and T, were observed for those samples annealed above 120 °C. No significant change in T was observed as a function of T_a while T showed strong dependency on T_a. Digital subtraction of the amorphous contribution from the semicrystalline FIR spectra provided characteristic spectra of amorphous and crystalline PTT. The bands at 373, 282, and 92 cm^?1 were assigned to the crystalline phase, while the bands at 525, 406, and 351 cm^?1 were attributed to the amorphous phase. It was shown that FIR spectroscopy can be used as a means to estimate the degree of crystallinity of PTT. The band ratio of 373 and 501 cm^?1 was plotted against crystallinity measured by density and reasonably good correlation was obtained. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1675–1682, 2007     

Fractionation and characterization of a protein–polysaccharide complex from Pleurotus tuberregium sclerotia

A water‐soluble sample (TM4b), extracted from sclerotia of Pleurotus tuberregium, was analyzed using elemental analysis, one‐ and two‐dimensional ¹H and ¹³C NMR. The results indicated that TM4b was protein–polysaccharide complex, and the polysaccharide moiety was hyperbranched β‐D ‐glucan with residuals branched at C3, C2, C4, and C6 positions. A preparative size‐exclusion chromatography (SEC) column combined with nonsolvent addition method was used to fractionate TM4b, and nine fractions were obtained. Solution properties of TM4b in 0.15 M aqueous NaCl were studied using static laser light scattering and viscometry at 25 °C. The dependences of intrinsic viscosity ([η]) and radius of gyration (〈S²〉) on weight–average molecular weight (M_w) for TM4b in the M_w range from 1.89 × 10⁴ to 2.58 × 10⁶ were found to be [η] = 0.21M and 〈S²〉 = 3.63M. It indicated that TM4b existed as compact sphere conformation in the aqueous solution. Atomic force microscopy image further confirmed that the TM4b molecules exhibited globular shape in the solution. This work gave valuable information on fractionation and chain conformation characterization of the globular protein–polysaccharide complex. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2546–2554, 2007     

Critical behavior of brittle‐ductile transition of polymers

We report that the brittle‐ductile transition of polymers induced by temperature exhibits critical behavior. When t close to 0, the critical surface to surface interparticle distance (ID_c) follows the scaling law: ID_c ∝ t^?v, where t = 1 ? T/T (T and T are the test temperature and brittle‐ductile transition temperature of matrix polymer, respectively) and v = 2/D. It is clear that the scaling exponent v only depends on dimension (D). For 2, 3, and 4 dimension, v = 1, 2/3, and 1/2 respectively. The result indicates that the ID_c follows the same scaling law as that of the correlation length (ξ), when t approach to zero. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 766–769, 2008