Synthesis and properties of soluble,fluorescent polyesters and polyethers with substituted m‐terphenyl segments in the main chain

A new series of rigid polyesters and semiflexible polyethers were synthesized from 4,4″‐dihydroxy‐5′‐phenyl or anthracenyl‐m‐terphenyl. The polymers were characterized by viscometry, Fourier transform infrared, NMR, X‐ray, differential scanning calorimetry, thermomechanical analysis, thermogravimetric analysis, ultraviolet–visible, and luminescence spectroscopy. The polyesters were amorphous, whereas some of the polyethers showed a low degree of crystallinity. All the polymers displayed an enhanced solubility even in 1,1,2,2‐tetrachloroethane and tetrahydrofuran. The glass‐transition temperatures were 123–146 °C for the polyesters and 45–117 °C for the polyethers. The polymers were stable up to 213–340 °C and afforded anaerobic char yields of 36–62% at 800 °C. Their optical properties were investigated both in solution and in the solid state. They showed ultraviolet fluorescence, violet‐blue fluorescence, or both with emission maxima at 333–487 nm. The polymers with anthracenyl pendent groups exhibited higher fluorescence quantum yields and emission maxima redshifted compared with the corresponding polymers with phenyl pendent groups. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2381–2391, 2000     

Synthesis and optical properties of soluble polyethers containing oligophenyl in the main chain and p‐styrylbenzene side groups

New polyethers containing alternating conjugated segments of p‐terphenyl or p‐quinquephenyl with p‐styrylbenzene side groups and aliphatic spacers were synthesized with pyrylium salts. They had moderate molecular weights, were amorphous, and dissolved in tetrahydrofuran, chloroform, and other common organic solvents. The glass‐transition temperatures were 68–82 and 110–153 °C for the polymers that carried p‐terphenyl and p‐quinquephenyl moieties, respectively. The absorption spectra showed a peak around 325 nm, and the band gaps were 3.27–3.34 eV, which were calculated from the onset absorption in solution. The photoluminescence maxima were at 393–398 nm in solution and 422–449 nm in thin films, indicating that the polymers were violet‐blue‐emitting materials. The photoluminescence quantum yields in solution were up to 0.25. The polymers displayed both in concentrated solutions and in the solid state intramolecular or intermolecular interactions. The polarity of the solvent influenced the shape of the photoluminescence curve. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 682–693, 2002; DOI 10.1002/pola.10151     

Soluble rigid–flexible polyethers containing bis(biphenyl)anthracene or bis(styryl)anthracene units in the main chain for light-emitting applications

New rigid–flexible polyethers containing bis(biphenyl)anthracene or bis(styryl)anthracene units in the main chain were synthesized and characterized by viscosimetry, thermal and mechanical analysis, NMR, UV-vis, and luminescence spectroscopy. The polyethers containing bis(styryl)anthracene units in the main chain form free-standing films either from solution casting or after melt pressing at temperatures where they are thermally stable. The length of the flexible spacer influences the thermal and mechanical behavior of these polymers. The isotropization temperature as well as the glass transition temperature show an odd–even effect depending on the spacer segment length. Films with high modulus at room temperature and glass transition temperatures in the range 74–103°C were obtained using dynamic mechanical analysis. These polymers show bright-yellow photoluminescence with maximum at 580 nm in solution. In the solid state, the luminescence maximum is either red or blue shifted depending on the number of the methylene units in the aliphatic segment. The polyethers containing bis(biphenyl)anthracene units in the main chain are blue-light-emitting polymers with photoluminescence maxima at 435 and 455 nm in solution. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3826–3837, 1999     

Highly near‐infrared emissive boron di(iso)indomethene‐based polymer: Drastic change from deep‐red to near‐infrared emission via quantitative polymer reaction

It is challenging to realize the near‐infrared (NIR) emission with large brightness and sharp spectra from the conjugated polymers. In this study, we demonstrate the strategy for receiving strong and pure NIR emission from polymeric materials using organoboron complexes and the modification after polymerization. A series of NIR emissive conjugated polymers with boron di(iso)indomethenes (BODINs) and fluorene or bithiophene were synthesized by Suzuki–Miyaura coupling reaction. The obtained polymers exhibited high emissions in the range from deep‐red to NIR region (quantum yields: ?_PL = 0.40–0.79, full width at half maximum height: Δλ_1/2 = 660–940 cm^?1, emission maxima: λ_PL = 686–714 nm). Next, the demethylation of the BODIN‐based polymer with o‐methoxyphenyl groups was carried out. The transformation of the polymer structure quantitatively proceeded via efficient intramolecular crosslinking through the intermediary of the boron atom. Finally, the resulting polymer showed both drastically larger red‐shifted and sharper photoluminescence spectrum than that of the parent polymer with deep‐red emission (?_PL = 0.37, Δλ_1/2 = 460 cm^?1, λ_PL = 758 nm). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Novel blue‐greenish electroluminescent poly(fluorenevinylene‐alt‐dibenzothiophenevinylene)s and their model compounds

Poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐2,8‐vinylene) (PS) and poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐5,5‐dioxide‐2,8‐ vinylene) (PSO) as well as corresponding model compounds were synthesized by Heck coupling. Both the polymers and model compounds were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. The polymers showed a decomposition temperature at ～430 °C and a char yield of about 65% at 800 °C in N₂. The glass‐transition temperatures of the polymers were almost identical (75–77 °C) and higher than those of the model compounds (26–45 °C). All samples absorbed around 390 nm, and their optical band gaps were 2.69–2.85 eV. They behaved as blue‐greenish light emitting materials in both solutions and thin films, with photoluminescence emission maxima at 450–483 nm and photoluminescence quantum yields of 0.52–0.72 in solution. Organic light‐emitting diodes with an indium tin oxide/poly(ethylene dioxythiophene):poly(styrene sulfonic acid)/polymer/Mg:Ag/Ag configuration with polymers PS and PSO as emitting layers showed green electroluminescence with maxima at 530 and 540 nm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6790–6800, 2006     

Bis[4-monosubstituted-5(4H)oxazolinones] as coupling agents for block copolymer synthesis: Reaction with amine-terminated oligomers and with hydroxy-terminated/amine-terminated oligomer mixtures

Block copolymers were prepared by the bulk reaction of mixtures of amine-terminated aliphatic polyamides and polyethers with bis[4-monosubstituted 5(4H)-oxazolinones] as the coupling agents. The simultaneous chain-coupling reaction of amine-terminated polyethers and hydroxy-terminated polyesters with these coupling agents also was investigated. As indicated by NMR and size exclusion chromatography studies, block copolymers of M_n ≥ 10,000 were obtained without side reactions in a much shorter reaction time than required when the conventional reaction was used between oligomers bearing mutually reactive end-groups. The block copolymers behaved as thermoplastic elastomers. Their thermal and thermomechanical properties were evaluated by differential scanning calorimetry and dynamic mechanical thermal analysis and compared to the block copolymers synthesized in the conventional way. When low molar mass oligomers were used (M_n ≤ 1000), copolymers of low crystallinity or amorphous copolymers were obtained. This was assigned to the disruption of chain regularity induced by the presence of the chain-coupling-agent moieties. However, properties comparable to those of copolymers obtained by using the conventional method were obtained by reacting oligomers of M_n ≥ 2000. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4412–4421, 1999     

Simultaneous construction of a polyether backbone and a variety of keto side chains by three‐component polycondensation: An improved method for the use of a variety of silyl enol ethers

For the synthesis of polyethers with a variety of keto side chains in a one‐step reaction, the three‐component polycondensation of dialdehydes, diol disilyl ethers, and silyl enol ethers of ketones was investigated. The method of monomer addition strongly affected the molecular weight of polymers and was optimized to yield high molecular weight polymers by model reactions. A variety of dialdehydes, diol disilyl ethers, and silyl enol ethers were polymerized in the presence of a catalytic amount of triphenylmethyl (trityl) perchlorate in CH₂Cl₂ at −78 °C according to the method of monomer addition. This polymer synthesis was unusual in that it concurrently constructed both the polyether backbone and the keto side chains from three starting compounds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 179–188, 2000     

Simple synthesis,photophysics, and electroluminescent properties of poly[2,7‐bis(4‐tert‐butylstyryl)fluorene‐9, 9‐diyl‐alt‐alkane‐α,ω‐diyl]

A simple synthetic route was used for the synthesis of a novel series of alternating copolymers based on substituted 2,7‐distyrylfluorene bridged through alkylene chains. First, 2,7‐dibromofluorene was reacted with 2 equiv of butyllithium, and this was followed by a treatment with 1 equiv of α,ω‐dibromoalkane to yield the intermediate, poly(2,7‐dibromofluorene‐9,9‐diyl‐alt‐alkane‐α,ω‐diyl). ( 1 ) Heck coupling of the latter with 1‐tert‐butyl‐4‐vinylbenzene afforded the target, poly[2,7‐bis(4‐tert‐butylstyryl)fluorene‐9,9‐diyl‐alt‐alkane‐α,ω‐diyl] ( 2 ). The two versions of 2 ( 2a and 2b which have hexane and decane, respectively, as alkane groups) were readily soluble in common organic solvents. Their glass‐transition temperature was relatively low (52 and 87 °C). An intense blue photoluminescence emission with maxima at about 408 and 409 nm was observed in tetrahydrofuran solutions, whereas thin films exhibited an orange emission with maxima at 569 and 588 nm. Very large redshifts of the photoluminescence maxima and Stokes shifts in thin films indicated strong aggregation in the solid state. Both polymers oxidized and reduced irreversibly. Single‐layer light‐emitting diodes with hole‐injecting indium tin oxide and electron‐injecting aluminum electrodes were fabricated. They emitted orange light with external electroluminescence efficiencies of 0.52 and 0.36% photon/electron, as determined in light‐emitting diodes made of 2a and 2b , with alkylenes of (CH₂)₆ and (CH₂)₁₀, respectively. An increase in the external electroluminescence efficiency up to 1.5% was reached in light‐emitting diodes made of polymer blends consisting of 2a and poly(9,9‐dihexadecylfluorene‐2,7‐diyl), which emitted blue‐white light. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 809–821, 2007.     

Pd(0)‐catalyzed polyaddition of bifunctional vinyloxiranes with phenol derivatives: The synthesis of polymers containing an allyl aryl ether moiety in the main chain

The palladium(0)‐catalyzed polyaddition of bifunctional vinyloxiranes [1,4‐bis(2‐vinylepoxyethyl)benzene ( 1a ) and 1,4‐bis(1‐methyl‐2‐vinylepoxyethyl)benzene ( 1b )] with oxygen nucleophiles such as hydroquinone and bisphenol A gave new unsaturated polyethers containing an allyl aryl ether moiety and pendant hydroxy groups. The polyaddition with 1a was largely affected by the phosphine ligands employed and the reaction temperature. The polyaddition with hydroquinone and bisphenol A was conducted at room temperature for 24 h in tetrahydrofuran in the presence of PPh₃ and gave the desired polyethers in good yields, the number‐average molecular weights (M_n) of which were 5700 and 7700, respectively. 1,2‐Bis(diphenylphosphino)ethane (dppe) was not effective in the polyaddition with 1a . The polyaddition of 1b with hydroquinone and bisphenol A gave the corresponding polyethers despite the kinds of ligands employed (PPh₃ and dppe), contrary to the polyaddition with 1a . The polyaddition of 1b with 4,4′‐biphenol was also carried out in the presence of Pd₂(dba)₃ · CHCl₃/dppe as a catalyst (where dba is dibenzylideneacetone) and afforded the expected polyether with a high M_n value (M_n = 24,900). In addition, vinyloxirane 1b could reacted with racemic 1,1′‐bi‐2‐naphthol to give the corresponding polyether in a good yield. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 476–482, 2003     

Photophysical and electrochemical characterization of new poly(arylene vinylene) copolymers containing quinoline or bisquinoline segments

Four new fluorescent conjugated vinylene‐copolymers incorporating quinoline or bisquinoline segments along the backbone were synthesized by Heck coupling. Three of them were fluorenevinylene‐copolymers and contained quinoline ( PQFV , PQFVT ) or bisquinoline segments ( PBQFV ). One of them ( PBQPV ) was phenylenevinylene‐copolymer and contained bisquinoline segments. All the copolymers were soluble in common organic solvents and had relatively low glass transition temperature (T_g = 50–56 °C for fluorenevinylenes and T_g < 25 °C for phenylenevinylene). In THF solutions, the quinoline‐containing copolymers showed absorption maxima at 411–420 nm while the bisquinoline‐containing ones exhibited maxima at 357–361 nm. The emission maxima of solutions were 465–490 nm. The copolymers showed high quantum yields up to 64%. The films exhibited absorption and emission maxima in the range of 371–437 nm and 480–521 nm, respectively. All copolymers revealed reversible reduction with electron affinity of 2.66–3.53 eV and irreversible oxidation scans with ionization potential of 5.39–5.53 eV. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3370–3379, 2009     

Synthesis,photophysics, structure‐tunable photoluminescence,and electrochemical properties of soluble poly(p‐phenylenevinylene)‐based polymers with adjacent 1,3,4‐oxadiazoles in the backbone

Three new poly(p‐phenylenevinylene)‐based polymers containing two 1,3,4‐oxadiazole moieties in the main chain per repeat unit were synthesized by Heck coupling. A single, double, or triple bond was introduced between the oxadiazoles to provide a means for modifying the polymer properties. The polymers were readily soluble in common organic solvents and showed T_g values lower than 50 °C. The color of the emissive light in both the solid state and the solution could be tuned by a change in the nature of the bond between the oxadiazole rings. The polymers emitted ultraviolet‐green light in solution with a photoluminescence (PL) emission maximum at 345–483 nm and blue‐green light at 458–542 nm in thin films. The PL quantum yields in solution were 0.36–0.43. The electrochemical properties are affected by the nature of the bond between the oxadiazoles as well. In polymers with a single bond between the oxadiazoles, a lower ionization potential was observed than in polymers with a double or triple bond. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3079–3090, 2005     

Synthesis and characterization of alternating copolymers containing triphenylamine as hole‐transporting units

A series of light‐emitting poly(p‐phenylene vinylene)s with triphenylamine units as hole‐transporting moieties in the main chain were synthesized via Wittig condensation in good yields. The newly formed vinylene double bonds possessed a trans configuration, which was confirmed by Fourier transform infrared and NMR spectroscopy. The high glass‐transition temperature (83–155 °C) and high decomposition temperature (>300 °C) suggested that the resulting copolymers possessed high thermal stability. These copolymers, especially TAAPV1, possessed a high weight‐average molecular weight (47,144) and a low polydispersity index (1.55). All the copolymers could be dissolved in common organic solvents, such as tetrahydrofuran (THF), CHCl₃, CH₂Cl₂, and toluene, and exhibited intense photoluminescence in THF (the emission maxima were located from 478 to 535 nm) and in film (from 478 to 578 nm). The low onsets of the oxidation potential (0.6–0.75 V) suggested that the alternating copolymers possessed a good hole‐transporting property due to the incorporation of triphenylamine moieties. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3278–3286, 2001     

Enhancing the glass‐transition temperature of polyimide copolymers containing 2,2′‐bipyridine units by the coordination of nickel malenonitriledithiolate

Polyimide copolymers containing 2,2′‐bipyridine were synthesized and characterized. The glass‐transition temperatures (T_g's) of the polymers ranged from 260 to 300 °C. In contrast to most known organic chromophore‐containing polyimides, the polyimide copolymers in this study showed elevated T_g's (270–320 °C) after coordination with nickel malenonitriledithiolate inorganic chromophores. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 498–503, 2000     

Synthesis and characterization of a novel AlQ3‐containing polymer

In this article, the synthesis of a tris(8‐hydroxyquinoline)aluminum (AlQ₃)‐containing poly(arylene ether) (4) is reported. The presence of AlQ₃ pendants in polymer 4 is confirmed by NMR, ultraviolet–visible, photoluminescence, and gel permeation chromatography analyses. This is the first report of the attachment of AlQ₃ complexes as side chains to a polymer. Polymer 4 has a glass‐transition temperature of 217.8 °C and is thermally stable with a 5% weight‐loss temperature greater than 500 °C under nitrogen, as determined by differential scanning calorimetry and thermogravimetric analyses, respectively. Polymer 4 is quite soluble in common organic solvents, such as tetrahydrofuran, N,N‐dimethylacetamide, and CHCl₃. A composite that is 80 wt % polymer 4 and 20 wt % AlQ₃ forms a transparent and tough film when cast from its chloroform solution. The application of this AlQ₃‐containing polymer in light‐emitting diodes is under investigation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2887–2892, 2000     

Synthesis and photoluminescence of linear and hyperbranched polyethers containing phenylquinoxaline units and flexible aliphatic spacers

Ultrahigh‐molecular‐weight linear polyethers were prepared through a reaction between the phenylquinoxaline monomers 2,3‐bis(4‐hydroxyphenyl)‐6‐fluoroquinoxaline and 2,3‐bis(4‐hydroxyphenyl)‐6‐(α,α,α‐trifluoromethyl)quinoxaline and 1,12‐dibromododecane. A new hyperbranched polyether containing a phenylquinoxaline moiety was also prepared from a new self‐polymerizable AB₂ monomer, 2,3‐bis(6‐bromohexyloxyphenyl)‐6‐(4‐hydroxyphenyloxy)quinoxaline. All the polyethers were amorphous and soluble in polar aprotic solvents. Their solution‐cast thin films were light yellow, ductile, and optically transparent. The polymers were thermally stable up to 350 °C and had glass‐transition temperatures in the range of 25–83 °C, which depended on the architecture and monomer structure. The monomers and polymers displayed fluorescence maxima in the blue‐light region in the range of 431–449 nm with relatively narrow peak widths; this indicated that they had pure and intense fluorescence. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3587–3603, 2004     

Synthesis of poly(p‐phenylene vinylene)‐ and poly(phenylene ethynylene)‐based polymers containing p‐terphenyl in the main chain with alkoxyphenyl side groups

Starting from the pyrylium salt and following a facile synthetic route, we synthesized and polymerized 4,4″‐diiodo‐2′,6′‐di[4‐(2′‐ethylhexyl)oxy]phenyl‐p‐terphenyl with p‐divinylbenzene or p‐diethynylbenzene. The resulting polymers had moderate molecular weights, were amorphous, and dissolved in tetrahydrofuran and chloroform, with glass‐transition temperatures of 120–131 °C. The polymers behaved as violet‐blue‐emitting materials with photoluminescence maxima around 420 and 450 nm in solution and in thin films, respectively. They possessed well‐defined chromophores resulting from steric interactions in the polymer chain. The photoluminescence quantum yields were up to 0.29. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2591–2600, 2002     

Synthesis of highly isotactic poly(N,N‐diethylacrylamide) by anionic polymerization with grignard reagents and diethylzinc

N,N‐Dimethylacrylamide (DMA) and N,N‐diethylacrylamide (DEA) were polymerized with various Grignard reagents in tetrahydrofuran at −78 °C in the presence of diethylzinc (Et₂Zn). Highly isotactic poly(DEA) was produced in quantitative yield with tert‐butylmagnesium bromide and Et₂Zn, whereas atactic poly(DEA) was generated in the absence of Et₂Zn. No stereospecific polymerization of DMA proceeded with Grignard reagent in the presence of Et₂Zn. The highly isotactic poly(DEA) obtained was soluble in water and showed the characteristic coil–globule transition phenomenon. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4677–4685, 2000     

Deep‐red emissive conjugated poly(2,6‐BODIPY‐ethynylene)s bearing alkyl side chains

Novel deep‐red emissive poly(2,6‐BODIPY‐ethynylene)s bearing dodecyl side chains (polymers A , B , and C ) have been prepared by palladium‐catalyzed Sonogashira polymerization of 2,6‐diiodo‐functionalized BODIPY monomers with 2,6‐diethynyl‐functionalized BODIPY monomers. These polymers emit in the deep‐red region with emission maxima at up to 690 nm, and exhibit significant red shifts (up to 166 and 179 nm) of both absorption and emission maxima compared with their parent BODIPY dyes due to significant extension of π‐conjugation. These polymers possess good thermal stability with decomposition temperature between 270 and 360 °C. The polymers exhibit a little larger Stokes shifts and shorter lifetime than their corresponding BODIPY dyes. The solid state thin films of polymers A , B , and C emit in near‐infrared region between 723 and 743 nm, and show significantly red shifts (up to 57 nm) in absorption and emission maxima relative to their polymer solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5354–5366, 2009     

Synthesis,characterization and luminescent properties of three-coordinate copper(I) halide complexes containing 2-(diphenylphosphino)biphenyl

Highly emissive three-coordinate copper halide complexes with a bidentate phosphine ligand have attracted attention. Here, a series of three-coordinate mono- and dinuclear copper halide complexes, [CuI(dpbp)₂] (1) and [CuX(dpbp)]₂ (dpbp = 2-(diphenylphosphino)biphenyl, X = Br (2), Cl (3)), were synthesized, and their molecular structures and photophysical properties were investigated. In the solid state, these complexes exhibit green photoluminescence with microsecond lifetimes (λ_max = 515–538 nm; τ = 11.8–19.1 μs) at 298 K. The emission of the complexes originates from the (σ + X) → π* transition. All three complexes displayed good thermal stability.     

Poly(pyridinium salt)s with stilbene or distyrylbenzene chromophores

A new series of poly(pyridinium salt)s that contained side stilbenyl groups or p‐distirylbenzene segments in the main chain were synthesized from the reactions of bis(pyrylium salts) with diamines. They were characterized by viscometry, Fourier transform infrared spectroscopy, NMR, X‐ray scattering, differential scanning calorimetry, thermomechanical analysis, ultraviolet–visible analysis, and luminescence spectroscopy. The polymers were amorphous and soluble in polar aprotic solvents such as dimethylacetamide, dimethylformamide, and dimethyl sulfoxide. The glass‐transition temperatures were in the range of 59–123 °C. These polymers had initial decomposition temperatures of 240–295 °C and afforded anaerobic char yields of 29–53% at 800 °C. Both the absorption and photoluminescence (PL) spectra of the polymers were studied, and the PL quantum yields in solution were determined. The polymers showed violet‐blue fluorescence in solution with PL maxima at 408–416 nm and violet‐green fluorescence in thin film with PL maxima at 454–523 nm. The structure of the diamine utilized for the preparation of the polymers did not influence their PL maxima. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2454–2462, 2001