Neue Rheniumkomplexe mit Trichalkogenido- und Tetrachalkogenido-Chelatliganden

New Rhenium Complexes Containing Trichalcogenido and Tetrachalcogenido Chelate Ligands The reactions of Cp*ReCl₄ with polychalcogenide salts such as Na₂S₄ or (NEt₄)₂Se₆ lead initially to the violet trichalcogenido chelate complexes Cp*ReCl₂(E₃) (E = S ( 3a ), Se ( 3b )) which, due to their functional chloro ligands, can be used as intermediates for further reactions. Upon hydrolysis in moist solvents or aminolysis with tert. butylamine 3a, b are converted into the tetrachalcogenido chelate complexes Cp*Re(O)(E₄) (E = S ( 4a ), Se ( 4b )) and Cp*Re(N^tBu)(E₄) (E = S ( 5a ), Se ( 5b )), respectively. X-Ray structure analyses were carried out for the three mononuclear cyclo-oligoselenido compounds 3b–5b . It appears that the size of the Se^2?_n chelate ring (n = 3 or 4) essentially depends on steric factors within the coordination sphere of rhenium.     

Trimethylstannyl- und Dimethylstannyl-substituierte Pyrrole – Synthesen,Spektren und Strukturen

Trimethylstannyl- and Dimethylstannyl-substituted Pyrroles – Synthesis, Spectra, and Structures Monomeric trimethylstannyl pyrroles, Me₃Sn? R (Me = CH₃ and R = ? NC₄H₄, ? NC₄H₂Me₂-2,5, ? NC₄Me₄-2,3,4,5, ? C₄H₃NMe-1), are synthesized by metathesis reactions from Me₃SnCl with 1(N)- and 2(C)-lithium pyrroles, respectively. An almost similar procedure gives monomeric dimethylstannylbis(pyrroles), Me₂SnR₂ ( 1 a – 3 a ), from Me₂SnCl₂ and 1-Li-pyrrolides (1 : 2 molar ratio) in good yields. Lithiated 1,2,5-trimethylpyrrole and Me₃SnCl forms the compound Me₃Sn? CH₂? C₄H₂Me(-5)NMe ( 8 ), the reaction of Me₂SnCl₂ with 2-lithium-1-methylpyrrole gives oligomeric [Me₂Sn? C₄H₂NMe? ]_x, ( 6 a ). The mass-, NMR, and vibrational spectra have been measured and discussed. The results of the X-ray structure determinations of Me₃Sn? NC₄H₄ ( 1 ) and Me₂Sn(? NC₄Me₄)₂ ( 3 a ) are compared with the structures of the known dimethylmetal pyrroles of Al, Ga, and In.     

Synthesen und Strukturen von Übergangsmetall‐Komplexen mit Dithiophosphinato‐ und Trithiophosphonato‐Liganden

Syntheses and Structures of Transition Metal Complexes with Dithiophosphinato and Trithiophosphinato Ligands The reactions of MnCl₂ with Ph₂P(S)(SSiMe₃) produced [Mn(S₂PPh₂)₂(thf)₂] ( 1 ) and [Mn(S₂PPh₂)₂(dme)] ( 2 ) (DME = 1,2‐Dimethoxyethane). The compounds [Co₆(S₃PPh)₂(μ⁴‐S)₂(μ³‐S)₂(PPh₃)₄] ( 3 ), [Co₂(S₃PPh)₂(PPh₃)₂] ( 4 ), [Ni(S₂PPh)(PPhEt₂)₂] ( 5 ), [Ni(S₃PPh)(PPhEt₂)₂] ( 6 ) and [Cu₄(S₃PPh)₂(dppp)₂] ( 8 ) [dppp = 1,3‐Bis(diphenylphosphanyl)propane] were obtained from reactions of first‐row transition metal halides with PhP(S)(SSiMe₃)₂ in the presence of tertiary phosphines. In a reaction of PhP(S)(SSiMe₃)₂ with PhPEt₂ PhPEt₂PS₂Ph ( 7 ) was isolated. All compounds were characterized by X‐ray crystallography.     

Synthesen und Strukturen von N‐Acylthioharnstoffkomplexen des Zinks und des Cadmiums

Synthesis and Structures of the Zinc‐ and Cadmium‐N‐Acylthiourea Complexes The synthesis and crystal structures of the N,N‐Diisobutyl‐N′‐benzoylthiourea complexes [Zn(Buⁱ₂btu)₂] and [Cd(Buⁱ₂btu)₂(HBuⁱ₂btu)] are reported. The complexes of Zn^II and Cd^II have different molecular structures. Whereas Zn^II forms a bischelate with tetrahedral coordination, three ligands coordinate in a trigonal‐bipyramidal manner in the Cd^II complex.     

Dimethylerdmetall‐Heterocyclen als Derivate trimethylsilylierter, ‐germylierter und ‐stannylierter Phosphane und Arsane – Synthesen,Spektren und Strukturen

Dimethyl Earth‐Metal Heterocycles – Derivatives of Trimethyl‐silylated, ‐germylated, and ‐stannylated Phosphanes and Arsanes – Syntheses, Spectra, and Structures The organo earth‐metal heterocycles [Me₂M^III–E(M^IVMe₃)₂]_n with M^III = Al, Ga, In; E = P, As; M^IV = Si, Ge, Sn and n = 2, 3 (Me = CH₃) have been prepared from the dimethyl metal compounds Me₂M^IIIX (X = Me, H, Cl, OMe, OPh) and the pnicogen derivatives H_nE(M^IVMe₃)_3–n (n = 0, 1) according to known preparation methods. The mass, ¹H, ¹³C, ³¹P, ²⁹Si, ¹¹⁹Sn nmr, as well as the ir and Raman spectra have been discussed comparatively; selected representatives are characterized by X‐ray structure analyses. The dimeric species with four‐membered (E–M^III)₂ rings are isotypic and crystallize in the triclinic space group P1, the trimer [Me₂In–P(SnMe₃)₂]₃ with a strongly puckered (In–P)₃‐ring skeleton crystallizes with two formula units per cell in the same centrosymmetric triclinic space group.     

Synthese und Kristallstrukturen der heteronuklearen Nitrido‐Komplexe [(Me2PhP)3(MeCN)ClRe≡N–MCl5] mit M = Sn und Zr

Synthesis and Structures of the Dinuclear Nitrido Complexes [(Me₂PhP)₃(MeCN)ClRe≡N–MCl₅] with M = Sn and Zr The water sensitive complexes [(Me₂PhP)₃(MeCN)ClRe≡N–MCl₅] (M = Sn ( 1 ) und Zr ( 2 )) are obtained in dichloromethane from [ReNCl₂(PMe₂Ph)₃] and the acetonitrile adducts of SnCl₄ or ZrCl₄. The compounds crystallize as dichloromethane solvate isotypically with [(Me₂PhP)₃(MeCN)ClRe≡N–TiCl₅] · CH₂Cl₂ in the space group P2₁/n. From toluene crystallize monoclinic crystals of 1 · MeCN · C₇H₈. In the diamagnetic complexes 1 and 2 an anion [MCl₅]^– coordinates to the nitrido ligand of the cationic complex [ReNCl(MeCN)(PMe₂Ph)₃]⁺. The resulting nitrido bridges Re≡N–M are almost linear and asymmetric with Re–N = 169.5 pm, Sn–N = 230.1 pm and Re–N–Sn = 164.5° for 1 and Re–N = 168.4 pm, Zr–N = 237.2 pm and Re–N–Zr = 165.6° for 2 . The phosphine ligands at the Re atom are in a meridional arrangement.     

Metallorganische 5d6‐Übergangsmetallkomplexe von zwei 1‐Methyl‐(2‐alkylthiomethyl)‐1H‐benzimidazol‐Liganden: Strukturen und elektrochemische Oxidation

Organometallic 5d⁶ Transition Metal Complexes of 1‐Methyl‐(2‐alkylthiomethyl)‐1H‐benzimidazole Ligands: Structures and Electrochemical Oxidation The complexes [(mmb)Re(CO)₃Cl], [(mtb)Re(CO)₃Cl], [(mmb)OsCl(Cym)](PF₆) and [(Cym)OsCl(mtb)](PF₆) where Cym = p‐cymene, mmb = 1‐methyl‐(2‐methylthiomethyl)‐1H‐benzimidazole and mtb = 1‐methyl‐(2‐tert‐butylthiomethyl)‐1H‐benzimidazole were synthesized and, except for the latter, structurally characterized. In comparison with other late transition metal compounds of these N‐S chelate ligands the rhenium(I) systems exhibit a balanced coordination to both N and S donor atoms. Anodic one‐electron oxidation produces EPR‐silent rhenium(II) states whereas the osmium(III) species [(mmb)OsCl(Cym)]²⁺ could be identified via EPR and UV/VIS spectroelectrochemistry.     

(PPh4)2[Cl2Re(N3S2)(μ‐NSN)(μ‐N≡ReCl3)]2 – ein Rhenium(VII)‐Komplex mit einer Nitrido‐, einer Dinitridosulfato(II)‐ und einer Rhena‐3,5‐dithia‐2,4,6‐triazino‐Funktion

(PPh₄)₂[Cl₂Re(N₃S₂)(μ‐NSN)(μ‐N≡ReCl₃)]₂ – a Rhenium(VII) Complex with a Nitrido, a Dinitridosulfato(II), and a Rhena‐3,5‐dithia‐2,4,6‐triazino Function The title compound has been prepared from PPh₄[Re^VIICl₄(NSCl)₂] with N(SiMe₃)₃ in dichloromethane solution to give red‐brown single crystals, which were suitable for a crystal structure determination. As a by‐product PPh₄[ReNCl₄] is formed. (PPh₄)₂[Cl₂Re^VII(N₃S₂)(μ‐NSN)(μ‐N≡Re^VIICl₃)]₂ ( 1 ): Space group P2₁/c, Z = 2, lattice dimensions at –80 °C: a = 1280.8(2), b = 1017.5(1), c = 2467.8(3) pm, β = 95.04(1)°, R = 0.049. The complex anion of 1 consists of a planar ReN₃S₂‐heterocycle which is connected with the second rhenium atom by a μ‐nitrido bridge as well as by a μ‐dinitridosulfato(II) ligand to form a planar Re₂(N)(NSN) six‐membered heterocycle. This [Cl₂Re(N₃S₂)(μ‐NSN)(μ‐N≡ReCl₃)]^– unit dimerizes via one of the N‐atoms of the (NSN)^4– ligand to give a centrosymmetric Re₂N₂ four‐membered ring.     

Synthese und Struktur von [(Me2PhP)3Cl2ReN]2ReCl4, [(Me2PhP)3Cl2ReN]2ReCl4 · 2 SbCl3 und [Re(NH)Cl2(PMe2Ph)3][SbCl6]

Synthesis and Structure of [(Me₂PhP)₃Cl₂ReN]₂ReCl₄, [(Me₂PhP)₃Cl₂ReN]₂ReCl₄ · 2 SbCl₃ and [Re(NH)Cl₂(PMe₂Ph)₃][SbCl₆] The reaction of ReNCl₂(PMePh)₃ with SbCl₅ in toluene yields the trinuclear complex [(Me₂PhP)₃Cl₂Re≡N]₂ReCl₄ · 2 SbCl₃ ( 1 · 2 SbCl₃). It forms triclinic crystals with the composition 1 · 2 SbCl₃, as well as monoclinic crystals 1 · 2 SbCl₃ · 4 C₇H₈. The monoclinic crystals with the space group P2₁/c, and a = 1212.3(2), b = 2098.5(4), c = 1827.7(3) pm, β = 95.51(1)°, Z = 2, have been used for a crystal structure determination. In the centrosymmetric complex 1 two complexes ReNCl₂(PMe₂Ph)₃ coordinate with their nitrido ligands a square planar, central unit ReCl₄. The SbCl₃ molecules are coordinated by chlorine bridges to Cl atoms of 1 , and, in addition, connect the complexes 1 with each other. The SbCl₃ free compound 1 is obtained in good yield by the reaction of ReNCl₂(PMePh)₃ with ReCl₄(NCEt)₂. It crystallizes in the triclinic space group P1 with a = 1037.7(3), b = 1153.0(2), c = 1393.8(3) pm, α = 72.31(2)°, β = 74.06(2)°, γ = 67.94(2)°, and Z = 1. The bond lengths of the Re–N triple bonds are 172 pm in 1 and 170 pm in 1 · 2 SbCl₃. By the reaction of ReNCl₂(PMePh)₃ with SbCl₅ in CH₂Cl₂ the solvent is decomposed forming HCl which protonates the nitrido ligand to afford the imido complex [Re(NH)Cl₂(PMe₂Ph)₃][SbCl₆] ( 2 ) crystallizing in the monoclinic space group P2₁/n with a = 1221.4(2), b = 1358.6(2), c = 2177.3(1) pm, β = 92,72(1)° and Z = 4. The Re–N distance in the almost linear unit Re≡N–H is 169,1 pm.     

Synthese und Kristallstrukturen der mehrkernigen Rhenium–Nitrido‐Komplexe [Re2N2Cl4(PMe2Ph)4(MeCN)] und [Re4N3Cl9(PMe2Ph)6]

Synthesis and Structures of the Multinuclear Rhenium Nitrido Complexes [Re₂N₂Cl₄(PMe₂Ph)₄(MeCN)] and [Re₄N₃Cl₉(PMe₂Ph)₆] The binuclear rhenium complex [Re₂N₂Cl₄(PMe₂Ph)₄(MeCN)] ( 1 ) is obtained as a byproduct of the synthesis of [(Me₂PhP)₃(MeCN)ClReNZrCl₅] from [ReNCl₂(PMe₂Ph)₃] and [ZrCl₄(MeCN)₂] in toluene. It crystallizes as 1 · 2 toluene in the monoclinic space group P2₁/n with a = 1517.0(3); b = 1847.7(2); c = 1952.4(6) pm; β = 106.44(1)° and Z = 4. The two Re atoms are connected by an asymmetric nitrido bridge Re≡N–Re with distances Re–N of 169.9(5) and 208.7(5) pm. In course of the reaction of [ReNCl₂(PMe₂Ph)₃] with [ZrCl₄(THF)₂] in CH₂Cl₂ hydrochloric acid is formed by acting of the Lewis acid on the solvent. HCl protonates and eliminates phosphine ligands of the educt [ReNCl₂(PMe₂Ph)₃] to form the phosphonium salt [PMe₂PhH]₂[ZrCl₆] ( 2 ). It crystallizes in the monoclinic space group C2/c with a = 1536.9(3); b = 1148.8(1); c = 1402.2(3) pm, β = 100.70(2)° and Z = 4. The remaining fragments of the rhenium complex combine to yield the tetranuclear mixed valent complex [Re₄N₃Cl₉(PMe₂Ph)₆] ( 3 ), crystallizing as 3 · CH₂Cl₂ in the triclinic space group P 1 with a = 1312.9(19); b = 1661.4(2); 1897.1(2) pm; α = 78.62(1)°; β = 86.77(1)°; γ = 68.28(1)° and Z = 2. The four Re atoms occupy the corners of a tetrahedron. Its edges are formed by three nitrido and three chloro bridges. The asymmetric nitrido bridges Re≡N–Re are characterized by short distances in the range of 172(2) to 176(3) pm and long distances of 194(3) to 204(2) pm. The angles Re–N–Re are between 154(1) and 160(1)°.     

mer‐[Re(py)3FI2], ein gemischter Fluoro–Iodo–Pyridin‐Komplex des dreiwertigen Rheniums

mer ‐[Re(py)₃FI₂], a Mixed Fluoro Iodo Pyridine Complex of Trivalent Rhenium The title compound has been prepared from ReI₃, Tl(OC₂H₅) and benzoylfluoride in pyridine. The substance was characterized by elemental analysis and by a crystal structure determination. Space group P 1, Z = 2, lattice dimensions at 20 °C: a = 8.266(3), b = 8.710(3), c = 13.707(4) Å, α = 100.55(2), β = 103.87(2), γ = 100.99(2)°. The Re atom is nearly octahedrally coordinated and the pyridine ligands are in mer positions.     

Synthese und Struktur von zwei- und dreikernigen Heterometallkomplexen mit Nitridobrücken zwischen Re und Mo

Synthesis and Structure of Two- and Threenuclear Heterometallic Complexes with Nitrido Bridges between Re and Mo The reaction of ReNCl₂(PMe₂Ph)₃ with MoCl₄(NCEt)₂ yields the heterometallic threenuclear complex [{(Me₂PhP)₃(EtCN)ClRe≡N–}₂MoCl₄][MoNCl₅]. The anion [MoNCl₅]^2– presumably results from a transfer of the nitrido ligand from the Re to the Mo atom. The air-sensitive compound is paramagnetic with μ_eff = 2.87 B. M. at room temperature. A reduction of the magnetic moment to 1.74 B.M at 20 K starts at 140 K. The complex crystallizes in the orthorhombic space group Pca2₁ with a = 2430(1), b = 1328(1), c = 2436.3(2) pm, Z = 4. With bond angles Re–N–Mo of 164° and 167° the nitrido bridges are almost linear. The distances Re–N of 169 and 170 pm can be interpreted with triple bonds. The Mo–N bond lengths of 210 and 211 pm correspond to single bonds. In the anion [MoNCl₅]^2– the distance Mo≡N is 167 pm. Hydrolysis of the threenuclear complex results in a cleavage of one of the nitrido bridges to yield (Me₂PhP)₃(EtCN)ClRe≡N–MoOCl₄. The compound is paramagnetic with μ_eff = 1.71 B.M. at room temperature. It crystallizes in the orthorhombic space group Pbca with a = 1718.5(4), b = 2037(1), c = 2041.1(7) pm, Z = 8. In the dinuclear complex the [MoOCl₄]^– unit is only weakly coordinated to the nitrido ligand with Mo–N = 246.5 pm, while the distance of the Re≡N bond of 168.1 pm is almost unchanged in comparison with a terminal bond. The bond angle Re≡N–Mo is 165.6°.     

Metallkomplexe mit N2O2S2‐Koordinationssphäre. Synthese und Charakterisierung der Cobalt(II)‐, Nickel(II)‐ und Kupfer(II)‐Komplexe eines 15‐ und eines 16‐gliedrigen N,N′‐bis(2‐hydroxyethyl)‐funktionalisierten makrocyclischen Liganden

Metal Complexes with N₂O₂S₂ Donor Set. Synthesis and Characterization of the Cobalt(II), Nickel(II), and Copper(II) Complexes of a 15‐ and a 16‐Membered Bis(2‐hydroxyethyl) Pendant Macrocyclic Ligand The macrocyclic ligands 6, 10‐bis(2‐hydroxyethyl)‐7, 8, 9, 11, 17, 18‐hexahydro‐dibenzo‐[e, n][1, 4, 8, 12]‐dithiadiaza‐cyclopentadecine ( 1 ) (L¹) and 5, 13‐bis(2‐hydroxyethyl)‐7, 8, 9, 10, 16, 17, 18, 19, 20‐nonahydro‐dibenzo‐[g, o][1, 9, 5, 13]‐dithiadiaza‐cyclohexadecine (L⁴) have been prepared. They form the stable complexes [CoL¹(‐H)CoL¹](ClO₄)₃ ( 2 ), [NiL¹](ClO₄)₂·MeOH ( 3 ), Λ‐[CuL¹](ClO₄)₂·MeOH ( 4a ) and rac‐[CuL¹](ClO₄)₂·MeOH ( 4b ), [NiL⁴](ClO₄)₂ ( 5 ), and [CuL⁴](ClO₄)₂ ( 6 ). The compounds 1 to 6 have been characterized by standard methods and single‐crystal X‐ray diffraction. In the complexes 2 to 6 the metal atoms are octahedrally coordinated by the N₂O₂S₂ donor set of the ligands. L¹ and L⁴ are folded herein along the N···M···S‐ and the N···M···N′‐axes, respectively. This results at the metal atom in a all‐cis‐configuration for the complexes of L¹ and a trans‐N₂‐cis‐O₂‐cis‐S₂‐configuration for the complexes of L⁴. The cobalt(II) complex 2 is a dimer, bridged by a rather short hydrogen bridge of 2.402(12)Å length. The copper(II) complexes of L¹ and L⁴ differ with respect to the Jahn‐Teller‐distortion.     

Synthesen und Kristallstrukturen von Cu‐ und Ag‐Komplexen mit Dithiophosphinat‐ und Trithiophosphonat‐Liganden

Syntheses and Crystal Structures of Copper and Silver Complexes containing Dithiophosphinato and Trithiophosphonato Ligands The reactions of Cu^I and Ag^I salts with diphenyldithiophosphinic acid trimethylsilylester in the presence of tertiary phosphines yield the complexes [Cu(μ‐S)SPPh₂(PR₃)]₂ (R = Me 1a , ⁱPr 1b ), [Ag(μ‐S)SPPh₂(PⁿPr₃)]₂ ( 2 ), [Ag(S₂PPh₂)(PEt₃)]₂ ( 3 ), and [Cu₈(μ₈‐S)(S₂PPh₂)₆] ( 4 ). The cage complex [(PhPS₃)₂Cu₄(PMe₃)₅] ( 5 ) is obtained by the reaction of phenyltrithiophosphonic acid trimethylester. All compounds were structurally characterised by X‐ray crystallography.     

Phosphaniminato‐Acetato‐Komplexe von Cobalt und Cadmium mit M4N4‐Heterocuban‐Struktur

Phosphoraneiminato‐Acetato Complexes of Cobalt and Cadmium with M₄N₄ Heterocubane Structure The phosphoraneiminato‐acetato complexes [M(NPEt₃)(O₂C–CH₃)]₄ with M = Co and Cd are formed from the anhydrous metal(II) acetates with excess Me₃SiNPEt₃ at 180 °C. By crystallization from diethyl ether blue, moisture sensitive single crystals of [Co(NPEt₃) · (O₂C–CH₃)]₄ can be obtained, while colourless single crystals of [Cd(NPEt₃)(O₂C–CH₃)]₄ · 2 CH₂Cl₂ originate from dichloromethane solution. In vacuo the intercalary CH₂Cl₂ is released. The complexes are characterized by their IR spectra and by crystal structure analyses. In both complexes the metal atoms are associated via μ₃–N bridges of the (NPEt₃^–) groups to form heterocubanes. In the cobalt complex the acetato ligands are bonded in a semichelate fashion with a short Co–O and a long Co–O bond each (Co–O distances in average 199.5 and 257.4 pm). In the cadmium complex the acetato groups form almost symmetrical chelates (Cd–O distances in average 232.1 and 237.8 pm); this leads to a distorted trigonal‐bipyramidal arrangement at the cadmium atoms. [Co(NPEt₃)(O₂C–CH₃)]₄: Space group P 1, Z = 4, lattice dimensions at –60 °C: a = 1110.1(2), b = 2051.3(5), c = 2169.5(4) pm, α = 100.03(2)°, β = 103.404(15)°, γ = 97.63(2)°, R = 0.0480. [Cd(NPEt₃)(O₂C–CH₃)]₄ · 2 CH₂Cl₂: Space group C2/c, Z = 4, lattice dimensions at –80 °C: a = 1550.2(1), b = 2101.1(1), c = 1706.1(1) pm, β = 91.09(1)°, R = 0.0311.     

Synthese und Struktur von Ruthenium(II)‐Komplexen mit Triazenido‐ und Pentaazadienido‐Liganden

Synthesis and Crystal Structure of Ruthenium(II) Complexes with Triazenido and Pentaazadienido Ligands The ruthenium(II) triazenido complex [RuCl(ClC₆H₄N₃C₆H₄Cl)(p‐cymene)] ( 1 ) is obtained by the reaction of silver bis(p‐chlorphenyl)triazenid with [RuCl₂(p‐cymene)]₂ in CH₂Cl₂, and forms air stable, orange yellow crystals. It crystallizes as 1 ·CH₂Cl₂ in the orthorhombic space group Pbca with the lattice parameters a = 3134.3(3), b = 2105.7(2), c = 769.15(4) pm and Z = 8. In the diamagnetic mononuclear complex 1 the chelating triazenido ligand coordinates with the atoms N(1) and N(3). p‐Cymene binds η⁶ with its C₆ ring. The reaction of the etherphosphane complex [RuCl₂(Ph₂PCH₂C₄H₇O₂)₂] with 1, 3‐bis(p‐tolyl)triazenid in THF yields the complex [RuCl(tolyl‐N₃‐tolyl)(Ph₂PCH₂C₄H₇O₂)₂] ( 2 ). 2 forms monoclinic, red crystals with the space group P2₁/c and a = 1521.0(2), b = 1451.8(2), c = 2073.7(2) pm, β = 99.29(1)° and Z = 4. It is air stable and diamagnetic. The triazenide ion coordinates with the atoms N(1) and N(3). One of the two etherphosphane ligands is chelating and coordinates with the P atom and one O atom, while the other ligand binds in a monodentate fashion with its P atom, resulting in a coordination number of six for the Ru^II. [Ag(tolyl‐N₅‐tolyl)]₂ reacts in THF with [RuCl₂(C₆H₆)]₂ to afford the air stable, diamagnetic pentaazadienido complex [RuCl(tolyl‐N₅‐tolyl)(C₆H₆)] ( 3 ). 3 forms monoclinic, red crystals with the space group P2₁/c and a = 1462.4(1), b = 1056.51(8), c = 1371.4(1) pm, β = 114.36(1)° and Z = 4. The chelating pentaazadienido ligand coordinates with the atoms N(1) and N(3) at the divalent Ru atom. The benzene molecule binds η⁶ with its π system.     

Polymere Iodoplumbate – Synthese und Kristallstrukturen von (Pr3N–C2H4–NPr3)[Pb6I14(dmf)2] · 4 DMF, (Pr3N–C2H4–NPr3)[Pb(dmf)6][Pb5I14] · DMF und (Me3N–C2H4–NMe3)2[Pb2I7]I

Polymeric Iodoplumbates – Synthesis and Crystal Structures of (Pr₃N–C₂H₄–NPr₃)[Pb₆I₁₄(dmf)₂] · 4 DMF, (Pr₃N–C₂H₄–NPr₃)[Pb(dmf)₆][Pb₅I₁₄] · DMF, and (Me₃N–C₂H₄–NMe₃)₂[Pb₂I₇]I (Pr₃N–C₂H₄–NPr₃)[Pb₆I₁₄(dmf)₂] · 4 DMF ( 1 ) and (Pr₃N–C₂H₄–NPr₃)[Pb(dmf)₆][Pb₅I₁₄] · DMF ( 2 ) have almost the same composition, but completely different structures. Both compounds are formed selectively depending on the reaction and crystallization conditions. In 2 the Pb^II atoms are coordinated either by six bridging I^– ligands in the two-dimensional [Pb₅I₁₄]^4– network or by six DMF ligands in the [Pb(dmf)₆]²⁺ cations. In contrast, (Me₃N–C₂H₄–NMe₃)₂[Pb₂I₇]I ( 3 ) contains non-coordinating I^– anions between the iodoplumbate layers. The iodoplumbate anions in 2 and 3 consist of face and corner sharing PbI₆ octahedra, whereas in 1 PbI₆ and PbI₅(dmf) octahedra share common edges to form a one-dimensional polymeric section of the PbI₂ structure. (Pr₃N–C₂H₄–NPr₃)[Pb₆I₁₄(dmf)₂] · 4 DMF ( 1 ): Space group P1, a = 920.1(3), b = 1597.2(5), c = 1613.9(4) pm, α = 66.02(2), β = 84.53(2), γ = 85.99(2)°, V = 2156(1) · 10⁶ pm³; (Pr₃N–C₂H₄–NPr₃)[Pb(dmf)₆][Pb₅I₁₄]·DMF ( 2 ): Space group P2₁, a = 1201.21(9), b = 3031.1(2), c = 1294.96(9) pm, β = 108.935(7)°, V = 4459.8(5) · 10⁶ pm³; (Me₃N–C₂H₄–NMe₃)₂[Pb₂I₇]I ( 3 ): Space group Pnma, a = 2349.9(2), b = 1623.83(9), c = 980.75(7) pm, V = 3742.4(5) · 10⁶ pm³.     

Neue neutrale und kationische Mono‐Aziridin‐Komplexe des Typs [CpMn(CO)2Az], [CpCr(NO)2Az]+ und [(Ph3P)(CO)4ReAz]+ über CO‐, Hydrid‐ und Chlorid‐Abspaltungsreaktionen

Novel Neutral and Cationic Mono‐Aziridine Complexes of the Type [CpMn(CO)₂Az], [CpCr(NO)₂Az]⁺, and [(Ph₃P)(CO)₄ReAz]⁺ via CO‐, Hydride‐, and Chloride‐Elimination Reactions The monoaziridine complexes 1 — 5 are obtained by three differently induced substitution reactions. The photolytically induced CO substitution reaction of [CpMn(CO)₃] with 2, 2‐dimethylaziridine leads to the neutral N‐coordinate aziridine complex [Cp(CO)₂Mn{$\overline{N(H)CMe₂C}$ H₂}] ( 1 ). The protonation of [(Ph₃P)(CO)₄ReH] with CF₃SO₃H and consecutive treatment with 2, 2‐dimethylaziridine or 2‐ethylaziridine gives the salt‐like aziridine complexes [(Ph₃P)(CO)₄Re{$\overline{N(H)CMe₂C}$ H₂}](CF₃SO₃) ( 2 ) or [(Ph₃P)(CO)₄Re{ H₂}](CF₃SO₃) ( 3 ) by hydride elimination reactions. The like‐wise salt‐like complexes [Cp(NO)₂Cr{$\overline{N(H)CMe₂C}$ H₂}](BF₄) ( 4 ) and [Cp(NO)₂Cr{ H₂}](CF₃SO₃) ( 5 ) are synthesized from [CpCr(NO)₂Cl] by chloride elimination with AgX (X = BF₄, CF₃SO₃) in the presence of 2, 2‐dimethylaziridine or 2‐ethylaziridine, respectively. As a result of X‐ray structure analyses, the metal atoms are trigonal pyramidally ( 1, 4, 5 ) or octahedrally ( 2, 3 , cis‐position) configurated; the intact three‐membered rings coordinate through the distorted tetrahedrally configurated N atoms. All compounds 1‐5 are stable with respect to the directed thermal alkene elimination to give the corresponding nitrene complexes; the IR, ¹H‐ and ¹³C{¹H}‐NMR, and MS spectra are reported and discussed.     

Synthese und Struktur der Nitrido‐Komplexe [(n‐Bu)4N]2[{(L)Cl4Re≡N}2PtCl2] (L = THF und H2O) und [(n‐Bu)4N]2[(H2O)Cl4Re≡N‐PtCl(μ‐Cl)]2

Synthesis and Crystal Structure of the Nitrido Complexes [(n‐Bu)₄N]₂[{(L)Cl₄Re≡N}₂PtCl₂] (L = THF und H₂O) and [(n‐Bu)₄N]₂[(H₂O)Cl₄Re≡N‐PtCl(μ‐Cl)]₂ The threenuclear complex [(n‐Bu)₄N]₂[{(THF)Cl₄Re≡N}_2—PtCl₂] ( 1a ) is obtained by the reaction of [(n‐Bu)₄N][ReNCl₄] with [PtCl₂(C₆H₅CN)₂] in THF/CH₂Cl₂. It forms red crystals with the composition 1a · 2 CH₂Cl₂ crystallizing in the tetragonal space group I4₁/a with a = 3186.7(2); c = 1311.2(1) pm and Z = 8. If the reaction of the educts is carried out without THF, however under exposure to air the compound [(n‐Bu)₄N]₂[{(H₂O)Cl₄Re≡N}₂PtCl₂] ( 1b ) is obtained as red trigonal crystals with the space group R3 and a = 3628.3(3), c = 1231.4(1) pm and Z = 9. In the centrosymmetric complex anions [{(L)Cl₄Re≡N}₂PtCl₂]^2— a linear PtCl₂moiety is connected in a trans arrangement with two complex fragments [(L)Cl₄Re≡N]^— via asymmetric nitrido bridges Re≡dqN‐Pt. For Pt^II such results a square‐planar coordination PtCl₂N₂. The linear nitrido bridges are characterized by distances Re‐N = 169.5 pm and Pt‐N = 188.8 pm ( 1a ), respectively, Re‐N = 165.6 pm and Pt‐N = 194.1 pm ( 1b ). By the reaction of [(n‐Bu)₄N][ReNCl₄] with PtCl₄ in CH₂Cl₂ platinum is reduced forming the heterometallic Re^VI/Pt^II complex, [(n‐Bu)₄N]₂[(H₂O)Cl₄Re≡N‐PtCl(μ‐Cl)]₂ ( 2 ). It crystallizes in the monoclinic space group C2/c with a = 2012.9(1); b = 1109.0(2); c = 2687.4(4) pm; β = 111.65(1)° and Z = 4. In the central unit ClPt(μ‐Cl)₂PtCl of the anionic complex [(H₂O)Cl₄Re≡N‐PtCl(μ‐Cl)]₂^2— with the symmetry C₂ the coordination of the Pt atoms is completed by two nitrido bridges Re≡N‐Pt to nitrido complex fragments [(H₂O)Cl₄Re≡N] ^— forming a square‐planar arrangement for the Pt atoms. The distances in the linear nitrido bridges are Re‐N = 165.9 pm and Pt‐N = 190.1 pm.