The phase behavior of tetramethyl bisphenol-A polyarylate/aliphatic polyester blends

The phase behavior of blends of tetramethyl bisphenol-A polyarylate (TMPAr) with various linear aliphatic polyesters characterized by the ratio of aliphatic carbons to ester groups in the repeating unit, CH₂/COO = 3 ∼ 9, was examined by differential scanning calorimetry and dynamic mechanical analysis. TMPAr/aliphatic polyester blends prepared by solvent casting were found to be miscible when the CH₂/COO ratio of aliphatic polyesters was larger than 4 and up to 9. The thermodynamic interaction parameter, B for the miscible blends was determined by the analysis of the depression of the melting point of polyester using the Hoffman-Weeks method. From the analysis of the heat of mixing data using a binary interaction model, it was concluded that strong unfavorable intramolecular interaction exists between the  CH₂ and  COO units in aliphatic polyesters and that four substituted methyl groups produces more favorable effects on the miscibility TMPAr with aliphatic polyesters. © 1998 John Wiley & Sons, Inc. J Polym Sci 36 : 201–212, 1998     

Fluorene‐rich high performance polyesters: Synthesis and characterization of 9,9‐fluorenylidene and 2,7‐fluorenylene‐based polyesters with excellent optical property

Polyesters PEs containing high content of fluorene units in their backbones were synthesized from 9,9‐diarene‐substituted fluorene diols ( 1 ) and fluorene‐based diacid chlorides ( 2 ) by high temperature polycondensation at 185 °C in diphenyl ether. The molecular weights of the polyesters PE1‐PE5 were in a range of M_w 25,000–165,000. The polyesters displayed their high thermostability: the glass transition temperatures (T_g) by differential scanning calorimetry analysis ranged from 109 to 217 °C, while the 10% weight loss temperatures (T_d10) measured by thermogravimetric analysis were over 400 °C in nitrogen and 395 °C in air. The polyesters had good solubility in most common organic solvents such as chloroform and toluene and gave tough, transparent and flexible cast films. The transmittance of the films was over 80% in the wavelength range from 450 to 700 nm in any PEs . The PEs exhibited high refractive index values around 1.65, while they had very low degree of birefringence. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2549–2556, 2008     

Synthesis and characterization of new soluble polyesters derived from various cardo bisphenols by solution polycondensation

A series of new polyesters was prepared from terephthaloyl (or isophthaloyl) chloride acid with various cardo bisphenols on solution polycondensation in nitrobenzene using pyridine as hydrogen chloride quencher at 150 °C. These polyesters were produced with inherent viscosities of 0.32–0.49 dL · g⁻¹. Most of these polyesters exhibited excellent solubility in a variety of solvents such as N,N‐dimethylformamide, tetrahydrofuran, tetrachloroethane, dimethyl sulfoxide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidinone, m‐cresol, and o‐chlorophenol. The polyesters containing cardo groups including diphenylmethylene, tricyclo[5.2.1.0^2,6]decyl, tert‐butylcyclohexyl, phenylcyclohexyl, and cyclododecyl groups exhibited better solubility than bisphenol A–based polyesters. These polymers showed glass transition temperatures (T_g's) between 185 °C and 243 °C and decomposition temperatures at 10% weight loss ranging from 406 °C to 472 °C in nitrogen. These cardo polyesters exhibited higher T_g's and better solubility than bisphenol A‐based polyesters. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4451–4456, 2000     

Synthesis,characterization, and stability of carbodiimide groups in carbodiimide‐functionalized latex dispersions and films

Cyclohexylcarbodiimidoethyl methacrylate (CCEMA) and t‐butylcarbodiimidoethyl methacrylate (t‐BCEMA) were prepared in a two‐step synthesis. These monomers were then used to prepare carbodiimide‐functionalized PBMA and PEHMA latex particles, employing two‐stage emulsion polymerization, with the carbodiimide–methacrylate monomers being introduced only in the second stage under monomer‐starved conditions. During emulsion polymerization, the carbodiimide moiety ( NCN ) was found to be unstable at pH 4, but stable when the pH of the dispersion was increased to 8, using NaHCO₃ as the buffer. Survival of  NCN group against hydrolysis during the polymerization, and during storage in the dispersion, was enhanced by using EHMA as the comonomer (more hydrophobic) and the t‐butyl carbodiimide derivative. The t‐butyl group provides more steric hindrance to the hydrolysis reaction. A decrease in the reaction temperature from 80°C to 60°C was also found to increase the extent of  NCN group incorporation during emulsion polymerization. Under ideal conditions, more than 98% of the  NCN groups in the monomer feed are successfully incorporated into the latex. When these latex particles are mixed with a  COOH containing latex and allowed to dry, polymer diffusion leading to crosslinking occurs. Films annealed at 60°C reach a gel content of 60% in 10 h. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 855–869, 2000     

Nonlinear optical properties of regioregular main‐chain polyesters

We have prepared new polyesters containing quadratic, nonlinear optical (NLO) active chromophores covalently incorporated into the main chain. In these polymers, the sequence of the chromophore units along the main chain is rigorously head to tail. All the polyesters are processable, both in the melt and in solution. For one polyester, a full second‐order NLO characterization has been performed. An out‐of‐resonance d₃₃ coefficient of 21 pm/V at 1368 nm has been measured. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2719–2725, 2007     

Synthesis of block and star copolymers by photoinduced radical coupling process

The general design for the synthesis of AB diblock, and A₂B and AB₂ star copolymers based on the statistical coupling of poly(styrene) (PSt) and poly (methyl methacrylate) (PMMA) macromolecules containing photoreactive benzophenone is presented. For this purpose, mono- and bifunctional initiators for Atom Transfer Radical Polymerization (ATRP) bearing benzophenone group were synthesized and characterized. End- and mid-chain benzophenone functional PSt and PMMA with low molecular weights were obtained by ATRP using these initiators in the presence of CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) catalytic complex. Poly(styrene-block-methyl methacrylate) (PSt-b-PMMA) copolymers were prepared by photolysis of the solutions containing end functional PSt and PMMA in THF at λ = 350 nm for 60 min in the presence of a hydrogen donor such as N-methyldiethanolamine (NMDEA). The proposed mechanism assumes hydrogen abstraction of photoexcited benzophenone moiety by NMDEA. Ketyl radicals resulting from abstraction reaction undergo radical-radical coupling to form benzpinacol structure at the core. Formation of A₂B and AB₂ type star copolymers upon irradiation of solutions containing appropriate combinations of end- and mid-chain functional polymers was also demonstrated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2938–2947, 2009     

New polyesters with photosensitive backbones based on the triazene unit

The synthesis of photosensitive polymers that contain the triazeno group (Ph NN NR₂) as a sensitive unit in their backbone is reported. The synthesis pathway consists of difunctional alcohols incorporating the photosensitive unit that react with diacyl derivatives to give the respective polyesters. Upon irradiation, the photosensitive chromophores both in monomeric and polymeric surroundings are cleaved fast and irreversibly, as shown in photolytic studies and their kinetic evaluations. Thermogravimetrical investigations indicate the loss of nitrogen being the initial thermal decomposition step and exhibit stabilities sufficient for the requirements in applications as photoresists. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3017–3025, 1997     

Poly(butylene terephthalate‐co‐5‐tert‐butyl isophthalate) copolyesters: Synthesis,characterization, and properties

A series of poly(butylene terephthalate) copolyesters containing 5‐tert‐butyl isophthalate units up to 50 mol %, as well as the homopolyester entirely made of these units, were prepared by polycondensation from a melt. The microstructure of the copolymers was determined by NMR to be random for the whole range of compositions. The effect exerted by the 5‐tert‐butyl isophthalate units on thermal, tensile, and gas transport properties was evaluated. Both the melting temperature (T_m) and crystallinity were found to decrease steadily with copolymerization, whereas the glass‐transition temperature (T_g) increased and the polyesters became more brittle. Permeability and solubility slightly increased with the content in substituted isophthalic units, whereas the diffusion coefficient remained practically constant. For the homopolyester poly(5‐tert‐butyl isophthalate), all these properties were found to deviate significantly from the general trend displayed by copolyesters, suggesting that a different structure in the solid state is likely adopted in this case. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 92–100, 2005     

Preparation of poly(alkylenebenzimidazole) by ruthenium complex catalyzed polycondensation of 3,3′‐diaminobenzidine with α,ω‐diols

The reactions of 3,3′‐diaminobenzidine with 1,12‐dodecanediol in 1 : 1–1:3 molar ratios in the presence of RuCl₂(PPh₃)₃ catalyst give poly(alkylenebenzimidazole), [ (CH₂)₁₁ O (CH₂)₁₁ Im / (CH₂)₁₀ Im ]_n (Im: 5,5′‐dibenzimidazole‐2,2′‐diyl) (I_a‐I_d) in 71–92% yields. The relative ratio between the [(CH₂)₁₁ O (CH₂)₁₁ Im ] unit (A) and the [‐ (CH₂)₁₀ Im ] unit (B) in the polymer chain varies depending on the ratio of the substrates used. The polymer I_a obtained from the 1 : 3 reaction contains these structural units in a 98 : 2 ratio. The polymers are soluble in polar solvents such as DMF (N,N‐dimethylformamide), DMSO (dimethyl sulfoxide), and NMP (N‐methyl‐2‐pyrrolidone) and have molecular weights M_n (M_w) of 4,200–4,800 (4,800–6,500) by GPC (polystyrene standard). The polymerization of the diol and 3,3′‐diaminobenzidine in higher molar ratios leads to partial cross‐linking of the resulting polymers I_e and I_f via condensation of imidazole NH group with CH₂OH group. Similar reactions of 3,3′‐diaminobenzidine with α,ω‐diols, HO(CH₂)_mOH (m = 4–10), in a 1 : 3 molar ratio give the polymers containing [ (CH₂)_m−1 O (CH₂) _m−1 Im ] and [ (CH₂) _m−2 Im ] units with partial cross‐linked structures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1383–1392, 1999     

Facile synthesis of hyperbranched poly(p‐phenyleneethynylene‐alt‐m‐phenyleneethynylene) with narrow dispersity and high branching degree by sonogashira polymerization of an AB2 monomer

An AB₂ monomer PhBr₂  C  C  Ph  C  CH containing one acetylene group and two bromide groups was efficiently synthesized by a strategy based on the different reactivity between aromatic iodide and bromide in Sonogashira reaction. The Sonogashira polymerization of PhBr₂  C  C  Ph  C  CH was investigated to get hyperbranched poly(p‐phenyleneethynylene‐alt‐m‐phenyleneethynylene) (hb‐PMPE) in terms of the effects of monomer addition method, core molecule with different functionality, and ratio of [monomer]/[core molecule]. The results showed that narrow dispersities (D) (D: 1.23∼1.50) were obtained by slow monomer addition and with core molecule. Bifunctional core molecule induced narrower dispersity than monofunctional core molecule. The molecular weight of hb‐PMPE increased with increasing ratio of [monomer]/[core molecule], however, a negative deviation from calculated value was observed. The dispersity slightly increased with increasing [monomer]/[core molecule]. When the ratio of [monomer]/[core molecule] was below 50/1, monomodal distribution was observed; whereas when the ratio increased to 70/1, bimodal distribution was obtained. All the polymers showed degrees of branching (DBs) around 0.6. The hb‐PMPEs showed one major absorption band with λ_max around 330 nm, and emission band with λ_max around 390 nm. All the polymers showed relative quantum yields (Φ_r) above 0.5 in dilute THF solution. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 96–104     

Synthesis of ladder polymers containing polydiacetylene backbones connected with methylene chains and their optical properties

The polymers consisting of polydiacetylene (PDA) backbones were obtained from the novel monomer derivatives, R CC CC R′ CC CC R [where R =  (CH₂)₄OCONHCH₂COOC₄H₉, R′ =  (CH₂)_n ; n = 2, 4, 8] [4BCMU4A(n)], in which linear methylene chain is sandwiched between two diacetylene moieties by solid-state 1,4-addition reaction. The polymerization process was investigated in detail by using spectroscopic techniques such as solid-state ¹³C-NMR, visible absorption, and IR absorption spectra. It was estimated that the polymerization of 4BCMU4A(8) and 4BCMU4A(4) takes place by two consecutive 1,4-addition reactions to form two PDA backbones, which constitute the two poles of the respective ladders. The bridging methylene chain length in the monomer was found to play a vital role as far as the polymerization process is concerned. Thus, the monomers with eight or four methylene units could form the ladder–PDAs by a two-step process, whereas the monomer containing two methylene units could only undergo one-step of 1,4-addition reaction. Further, it was found that the crystallinity of the polymers depends on the methylene chain length in the monomers, 4BCMU4A(8) being the most crystalline of all. These structural features strongly affect their absorption spectra. The third-order nonlinear optical susceptibilities (χ⁽³⁾) for these polymers were measured using third-harmonic generation method. The largest χ⁽³⁾ value obtained was 3.4 × 10⁻¹¹ esu for the poly[4BCMU4A(8)] thin film in resonant region. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3537–3548, 1999     

Studies on the synthesis and properties of ferroelectric side chain liquid crystalline polyoxetanes

Two series of novel ferroelectric liquid crystalline (FLC) monomers were derived from 3-(hydroxymethyl)-3-methyloxetane, used as the backbone unit, and 2-(S)-[2-(S)-methylbutoxy]propionic acid, as a chiral moiety. The corresponding polyoxetanes were prepared by ring-opening polymerization using BF₃ · OEt₂ as an initiator. In addition to the structure identification, their liquid crystal phase behavior and electrical properties are also studied. Before their connection to the chiral molecular moiety, two series of carboxylic acids, 4-(6-[(3-methyloxetan-3-yl)methoxy]alkoxy)-benzoic acids and 4,4′-[6-(3-methyloxetan-3-yl)alkoxy]biphenylcarboxylic acids, show the phase sequence K Sc I and K Sc N I, respectively. After connection, the phase behavior of the corresponding chiral monomers is changed from K Sc I to K Sc* N* I as well as from K Sc N I to K Sc* Sa I. Only the phase sequence K Sc* Sa I is observed in both series of polyoxetanes. All of the synthesized monomers exhibited enantiotropic chiral smectic C(Sc*) phase. The monomers, with the biphenyl unit linked directly with a chiral center, possessed higher spontaneous polarization (P_s) values. Polyoxetanes possess a wide temperature range for the liquid crystal phase, about 120°C, and the Sc* phase range can be up to 95°C. However, the position of the biphenyl unit will not affect the spontaneous polarization of the synthesized side chain FLC polyoxetanes. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2843–2855, 1997     

Polymerization of vinyl monomers using a novel trifunctional iniferter

A novel trifunctional iniferter with photoinduced and thermal chemical dissociation functional groups in one molecule, diethyl 2,3‐dicyano‐2,3‐di(p‐N,N‐diethyldithiocarbamylmethyl)phenylsuccinate (DDDCS), was successfully synthesized. The bulk polymerizations of styrene and methyl methacrylate initiated by DDDCS under UV‐light irradiation and heating, respectively, were studied. The polymerizations proceeded via a living polymerization process in both cases; that is, the conversion and molecular weight of the resulting polymer increased linearly with increased reaction time. The resulting polymers, containing α‐ and ω‐N,N‐diethyldithiocarbamyl end groups, served as macroiniferters for further block copolymerization. Electron paramagnetic resonance studies showed that DDDCS initiated as a photoiniferter under UV‐light irradiation by reversible C S‐bond dissociation and as a thermal iniferter under heating by reversible hexasubstituted C C‐bond dissociation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2115–2120, 2000     

Alternating copolymers with degradability and quantitatively controlled thermosensitivity

To combine temperature responsivity and degradability, novel alternating copolymers with polyester backbone and oligo(ethylene glycol) side chain were designed and prepared by alternating ring‐opening copolymerization of succinic anhydride (SA) and functional epoxide monomer(s). The epoxide monomer containing one ethylene glycol unit, 2‐((2‐methoxyethoxy)methyl)oxirane (MEMO), has displayed similar copolymerization activity to that containing two ethylene glycol units, 2‐((2‐(2‐methoxyethoxy)ethoxy)methyl)oxirane (ME₂MO), when copolymerized with SA. This feature led to the formation of alternating copolymers with statistical random distribution of MEMO/ME₂MO units along the backbone when mixed MEMO/ME₂MO comonomers were fed. These polyesters possess degradability and quantitatively controlled lower critical solution temperature (LCST; 18–50 °C) and T_g (?40 to ?31 °C) both in linear relations with MEMO/ME₂MO feed ratio. Fine control of LCST near body temperature is thus realized for the reported degradable and thermoresponsive polyesters, which have promising applications in biomedical fields. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Study on thermal degradation mechanisms of comb polyacrylates containing long fluorocarbon side chains by TG/FTIR

Thermal degradation of two series of polyacrylates containing long fluorocarbon chains [abbr.: PF_nA {HCF₂(CF₂)_n−1  CH₂ O C(O) , n = 4, 6, 8, 10} and abbr.: PFF_nEA {CF₃(CF₂)_n−1  CH₂CH₂ O C(O) , n = 6, 8, 10}] was investigated by TG /FTIR. Thermal degradation behavior of polymers changed depending on the type of tie groups, which link the fluorocarbon chains to the main chain, and also on the length of fluorocarbon chains. It was clarified that the apparent activation energies (ΔE_a ) of PF_nA series obtained by Ozawa's method varied in the order of PF₄A > PF₆A > PF₈A > PF₁₀A, while those of PFF_nEA series having tie group of  CH₂ CH₂ O C(O) were almost constant. The results for PF_nA series (tie group:  CH₂ O C(O) ) are attributable to the shield effect of long fluorocarbon chains on the back‐biting reaction in the thermal degradation of comb polymers rather than the change of C C bond dissociation energy in the main chain. It was found that TG curves of PFF_nEA series were shifted to the lower temperature region than those of PF_nA. This result can be attributable to the scission of side groups followed by the evaporation of fluorocarbon compounds and carbon dioxide. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2794–2803, 2000     

Synthesis and characterization of fluorine‐containing polyesters by the polyaddition of bis(epoxide)s with active diesters

The synthesis and optical properties of polyesters with pendant fluorinated phenoxy groups were examined. The polyaddition of bisphenol AF diglycidyl ether ( 1 ) with fluorine‐containing terephtalates ( 2a–f ) was carried out with tetrabutylphosphonium chloride (TBPC) as the catalyst in chlorobenzene to afford the corresponding polyesters with number‐average molecular weights (M_n's) ranging from 15,200 to 30,000 in 88–96% yields. Furthermore, the polyaddition of 1 with isophthalate 2g and phthalate 2h also produced high‐molecular‐weight polyesters with M_n's = 22,700 and 22,600 in 88 and 84% yields, respectively. The linear relationship was observed between the fluorine contents and refractive indices of the obtained polyesters. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 213–222, 2003     

Coupling selectivity in the radical‐controlled oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) complex

Various effects on the coupling selectivity of the oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) halogeno complex [Cu(tacn)X₂] are described. With respect to the amount of the catalyst and the nature of the halide ion (X) of Cu(tacn)X₂, the coupling selectivity hardly changed. The Cu(tacn) catalyst possessed a turnover number greater than 1860. As the temperature of the reaction and the polarity of the reaction solvent were elevated, the C O coupling at the o‐position increased, but the C C coupling was not involved. For the polymerization in toluene at 80 °C, poly(1,4‐phenylene oxide), obtained as a methanol‐insoluble part, showed the highest number‐average molecular weight of 4000 with a melting point (T_m) of 195 °C. Only a slight change in the coupling selectivity was observed in the presence or absence of hindered amines as the base. Surprisingly, however, the C O selectivity decreased from 100 to 24% with less hindered amines, indicating that the selectivity drastically changed from a preference for C O coupling to a preference for C C coupling. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4792–4804, 2000     

Palladium‐catalyzed modification of poly(p‐bromostyrene) with carbazole and related heteroarenes containing an N?H bond and their properties

Palladium‐catalyzed polymer reactions of poly(p‐bromostyrene) with carbazole and related heteroarenes containing an N H bond (phenothiazine, phenoxazine, and iminostilbene) afforded polystyrene derivatives with heteroaromatic groups in the side chains with high conversions and recoveries. Characterization and chemical oxidation properties of the polymers also were examined. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 28–34, 2000     

Synthesis and characterization of side-chain liquid crystal polyurethanes

A series of liquid crystal α-[bis(2-hydroxyethyl)amino]-ω-(4-nitroazobenzene-4′-oxy)alkanes (Cn-diol) with different alkyl chain length has been synthesized. All Cn-diols exhibit a smectic phase that has been identified by means of polarizing microscopy and differential scanning calorimetry. These compounds are suitable monomers for the synthesis of side-chain liquid crystalline polyurethanes and polyesters. They were polymerized with hexamethylene diisocyanate to corresponding SCLC polyurethanes in which the spacer length was varied from 2 to 12 methylene units. Polyurethanes (CnP) with spacer lengths n ≥ 4 exhibited liquid crystalline behavior. Fourier transform infrared temperature studies of the CnP were done focusing on H-bonds between the N H and CO groups of the urethane backbone. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2871–2888, 1997     

Silicon‐terminated telechelic oligomers by ADMET chemistry: Synthesis and copolymerization

Methoxydimethylsilane and chlorodimethylsilane‐terminated telechelic polyoctenomer oligomers (POCT) have been prepared by acyclic diene metathesis (ADMET) chemistry using Grubbs' ruthenium Ru(Cl₂)(CHPh)(PCy₃)₂ [Ru] or Schrock's molybdenum Mo(CH CMe₂Ph)(N 2,6 C₆H₃ i Pr₂)(OCMe(CF₃)₂)₂ [Mo] catalysts. These macromolecules have been characterized by FTIR, ¹H‐, ¹³C‐, and ²⁹Si‐NMR spectroscopy. The molecular weight distributions of these polymers have been determined by GPC and vapor pressure osmometry (VPO). The number‐average molecular weight (M_n) values of the telechelomers are dictated by the initial ratio of the monomer to the chain limiter. The termini of these oligomers (M_n = 2000) can undergo a condensation reaction with hydroxy‐terminated poly(dimethylsiloxane) (PDMS) macromonomer (M_n = 3300) [HO Si(CH₃)₂ O { Si(CH₃)₂O }_x  Si(CH₃)₃], producing an ABA‐type block copolymer, as follows: (CH₃)₃SiO [ Si(CH₃)₂O ]_x [ CHCH (CH₂)₆ ]_y [ OSi(CH₃)₂ ]_x OSi(CH₃)₃. The block copolymers were characterized by ¹H‐ and ¹³C‐NMR spectroscopy, VPO, and GPC, as well as elemental analysis, and were determined by VPO to have a M_n of 8600. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 849–856, 1999