Selenostannate aus wäßriger Lösung Darstellung und Struktur von Na4Sn2Se6 · 13 H2O

Selenostannates from Aqueous Solution, Preparation and Structure of Na₄Sn₂Se₆ · 13 H₂O The dimeric anion Sn₂Se₆^4? is prepared by reaction of SnSe₂ with alkali metal selenide in a 1:1 molar ratio. The orange-red hydrated sodium salt Na₄Sn₂Se₆ · 13 H₂O is characterized by a complete X-ray structure analysis and by its vibrational spectrum. The compound is triclinic (P1 ) with a = 7.106(2), b = 10.330(2), c = 19.009(4) Å, α = 78.60(2), β = 85.66(2), γ = 72.85(2)° (?130°C), Z = 2. It contains isolated Sn₂Se₆^4? anions consisting of two edge-sharing tetrahedra [Sn? Se 2.456(1)–2.589(1) Å] which are in contact to the hydrated Na⁺ ions within an extensive hydrogen bridge system. Raman-active vibrations are observed at 260, 202, 188, 116, 93, and 78 cm^?1.     

Synthesis and Structure of the Bicyclic [Sn4Se11]6– Anion in Na6Sn4Se11 · 22 H2O

Na₆Sn₄Se₁₁ · 22 H₂O can be crystallised at –8 °C as yellow‐orange needles from the 1 : 2 H₂O/CH₃OH mother liquor of a superheated reaction mixture of NaOH(s), Sn and Se. The bicyclic [Sn₄Se₁₁]^6– anion exhibits crystallographic C₂ symmetry and is composed of corner‐bridged SnSe₄ tetrahedra. Two opposite tin atoms of an Sn₄Se₄ 8‐membered ring are linked by a common Se atom, thereby affording two 6‐membered boat‐shaped Sn₃Se₃ rings with a shared Sn–Se–Sn bridging unit. [Sn₄Se₁₁]^6– thus represents the immediate precursor of the well‐known adamantane‐like [Sn₄Se₁₀]^4– anion.     

Chloro- und Polyselenoselenate(II) Darstellung,Struktur und Eigenschaften von [Ph3(C2H4OH)P]2[SeCl4] · MeCN, [Ph4P]2[Se2Cl6] und [Ph4P]2[Se(Se5)2]

Chloro- and Polyselenoselenates(II): Synthesis, Structure, and Properties of [Ph₃(C₂H₄OH)P]₂[SeCl₄] · MeCN, [Ph₄P]₂[Se₂Cl₆], and [Ph₄P]₂[Se(Se₅)₂] By symproportionation of elemental selenium and SeCl₄ in polar protic solvents the novel chloroselenates(+II), [SeCl₄]^2? and [Se₂Cl₆]^2?, could be stabilized; they were crystallized with voluminous organic cations. They were characterized from complete X-ray structure analysis. Yellow-orange [Ph₃(C₂H₄OH)P]₂[SeCl₄] · MeCN (space group P1 , a = 10.535(4), b = 12.204(5), c = 16.845(6) Å, α = 77.09(3)°, β = 76.40(3)°, γ = 82.75(3)° at 140 K) contains in its crystal structure monomeric [SeCl₄]^2? anions with square-planar coordination of Se(+II). The mean Se? Cl bond length is 2.441 Å. In yellow [Ph₄P]₂[Se₂Cl₆] (space group P1 , a = 10.269(3), b = 10.836(4), c = 10.872(3) Å, α = 80.26(3)°, β = 79.84(2)°, γ = 72.21(3)° at 140 K) a dinuclear centrosymmetric [Se₂Cl₆]^2? anion, also with square-planar coordinated Se(+II), is observed. The average terminal and bridging Se? Cl bond distances are 2.273 and 2.680 Å, respectively. From redox reactions of elemental Se with boranate/thiolate in ethanol/DMF the bis(pentaselenido)selenate(+II) anion [Se(Se₅)₂]^2? was prepared as a novel type of a mixed-valent chalcogenide. In dark-red-brown [Ph₄P]₂[Se(Se₅)₂] (space group P2₁/n, a = 12.748(4), b = 14.659(5), c = 14.036(5) Å, β = 108.53(3)° at 140 K) centrosymmetric molecular [Se(Se₅)₂]^2? anions with square-planar coordination of the central Se(+II) by two bidentate pentaselenide ligands is observed (mean Se? Se bond lengths: 2.658 Å at Se(+II), 2.322 Å in [Se₅]_2?). The resulting six-membered chelate rings with chair conformation are spirocyclically linked through the central Se(+II). The vibrational spectra of the new anions are reported.     

Darstellung und Kristallstruktur von Ethylendiammonium-Selenostannaten(IV) sowie von [2 SnSe2 · en]∞

Preparation and Crystal Structure of Ethylenediammonium Selenostannates(IV) and [2 SnSe₂ · en]∞ The selenostannates(IV) [enH₂]₂[Sn₂Se₆] · en 1 and [enH₂][Sn₃Se₇] · 1/2en 2 have been prepared by the methanolothermal reaction of SnSe₂ with ethylenediamine (en) (160°C, 13 bar) in the presence of respectively Se or BaSe. The [Sn₂Se₆]^4? anion in 1 consists of two edgebridged SnSe₄ tetrahedra and displays crystallographic C_i symmetry. The crystal structure of 2 contains polyselenostannate(IV) sheet anions [Sn₂Se₇²], for which the basic elements are trigonal SnSe₅ bipyramids. Each of the three symmetry independent Sn atoms is linked to the other Sn atoms via Sn? Se? Sn bridges leading to the formation of Sn₃Se₁₀ units. Methanolothermal reaction of SnSe₂ with en alone yields the edge-bridged chain structure [2 SnSe₂ en]∞ 3 , in which each of the Sn atoms is bonded to four Se atoms. Every second Sn atom is also coordinated by an en molecule and displays, therefore, an octahedral geometry. The remaining Sn atoms are coordinated tetrahedrally by Se atoms.     

Etude Structurale de la forme basse Température de NH4Sn2F5 (Type γ)

Structural Study of the Low-temperature Modification of NH₄Sn₂F₅ (Type γ) NH₄Sn₂F₅, monoclinic, space group C2, Cm or C2/m, a = 7.361(4) Å, b = 12.752(6) Å, c = 10.492(5) Å, β = 103.5(7)°, V = 957,2(9) ų, Z = 6. MoKα (= 0.7107 Å) R = 0.036 for 476 observed reflexions. The structure is built from alternative layers [Sn? F] and [NH₄⁺]. Three kinds of fluorine have vacancy positions, that explains the bidimensional conduction in NH₄Sn₂F₅.     

1,3‐Bis[2‐(dimethylaminomethyl)phenyl]triselenide

The title compound, C₁₈H₂₄N₂Se₃, consists of discrete molecules; owing to the presence of strong intramolecular N...Se interactions [N...Se = 2.671 (4) and 2.873 (4) Å], the chalcogen Se atoms of the angular Se₃ chain exhibit different coordination geometries, i.e. the terminal Se atoms are tricoordinated and exhibit a T‐shaped environment of the CNSe₂ core [N...Se—Se = 173.73 (9) and 172.29 (9)°], while the central Se atom is dicoordinated to the other two Se atoms, with an Se—Se—Se angle of 108.32 (2)°.     

Na2B2Se7, K2B2S7 und K2B2Se7: Drei Perchalkogenoborate mit neuem polymeren Anionengerüst

Na₂B₂Se₇, K₂B₂S₇, and K₂B₂Se₇: Three Perchalcogenoborates with a Novel Polymeric Anion Network Na₂B₂Se₇ (I 2/a; a = 11.863(4) Å, b = 6.703(2) Å, c = 13.811(6) Å, β = 109.41(2)°; Z = 4), K₂B₂S₇ (I 2/a; a = 11.660(2) Å, β = 6.827(1) Å, c = 12.992(3) Å, β = 106.78(3)°; Z = 4), and K₂B₂Se₇ (I 2/a; a = 12.092(4) Å, b = 7.054(2) Å, c = 13.991(5) Å, β = 107.79(3)°; Z = 4) were prepared by reaction of stoichiometric amounts of sodium selenide (potassium sulfide) with boron and sulfur or of potassium selenide and boron diselenide, respectively, at 600°C with subsequent annealing. The crystal structures consist of polymeric anion chains of composition ([B₂S₇]^2?)_n or ([B₂Se₇]^2?)_n formed by spirocyclically connected five-membered B₂S₃ (B₂Se₃) rings and six-membered B₂S₄ (B₂Se₄) rings. The nine-coordinate alkaline metal cations are situated in between.     

Synthesis and Crystal Structure of Bis(tetraphenylphosphonium) Hexabromo‐diselenate(II)‐bis{dibromodiselenate(I)}, [PPh4]2[Se2Br6(Se2Br2)2], the Salt of a Mixed‐valence Bromoselenate(II,I) Anion

The Red crystals of [PPh₄]₂[Se₂Br₆(Se₂Br₂)₂] ( 1 ) were obtained when selenium and bromine reacted in the solution of acetonitrile in the presence of tetraphenylphosphonium bromide. The crystal structure of 1 has been determined by X‐ray diffraction and refined to R = 0.0201 for 4024 reflections. The crystals are triclinic, space group with Z = 2 and a = 11.2757(4) Å, b = 12.3347(5) Å, c = 12.4948(5) Å, α = 113.152(4)°, β = 114.745(4)°, γ = 91.208(3)° (120(2) K). In the solid state the anion of 1 is built up of the Se₂Br₆ core and two Se₂Br₂ molecules each of which is linked to one of the trans‐positioned terminal Br_t atoms of the Se₂Br₆ core. The central Se₂Br₆ part consists of a nearly planar arrangement of two planar SeBr₄ units sharing a common edge through two μ₂‐bridging Br atoms. The contact between the Br_t and the Se^I atom of the Se₂Br₂ molecule is 3.0872(5) Å and can be interpreted as a bond of the donor‐acceptor type with the Br_t as donor and the Se₂Br₂ molecule as acceptor. The terminal Se^II–Br and μ₂Br–Se^II bond lengths are 2.3654(4), 2.6699(5) Å and 2.5482(5), 3.0265(5) Å, respectively. The bond lengths in the coordinated Se₂Br₂ molecule are: Se^I–Se^I = 2.2686(5) Å, Se^I–Br = 2.3779(5) and 2.3810(5) Å.     

CuClSe1.53Te0.47 and CuClSe0.56Te1.44: Structural and Vibrational Spectroscopic Investigations on Copper(I) Chalcogen Chlorides

CuClSe_1.53Te_0.47 and CuClSe_0.56Te_1.44 are obtained from the reaction of CuCl, Se, and Te in stoichiometric amounts. Both copper(I) selenium tellurium chlorides are monoclinic, space group P2₁/n (no. 14) with lattice constants of a = 7.837(1) Å, b = 4.699(1) Å, c = 10.762(2) Å, β = 104.37(2)°, V = 383.9(1) ų (CuClSe_1.53Te_0.47), and a = 8.074(1) Å, b = 4.830(1) Å, c = 10.973(1) Å, β = 103.87(2)°, V = 415.5(1) ų (CuClSe_0.56Te_1.44), and Z = 4. A common feature of these isostructural compounds are heteroatomic strands [YY'] (Y, Y' = chalcogen). These strands are running along [010] and are connected to layers by chains [CuCl]. Vibrational spectra of CuClSe_1.53Te_0.47, CuClSe_0.56Te_1.44, CuXTe₂ and CuX'Se₂ (X = Cl, Br, I; X' = Cl, Br) are analysed with respect to the bonding relations of the chalcogen chains. Modes derived from IR and Raman spectra are assigned by correlation with tri gonal Se and related copper(I) chalcogen halides. Both, X‐ray structural data and an analysis of the chalcogen vibrational modes in IR and Raman spectra, lead to a detailed insight into the ordering phenomena of the chalcogen chains in this type of copper(I) chalcogen halides.     

Chloroselenate(IV): Darstellung,Struktur und Eigenschaften von [As(C6H5)4]2Se2Cl10 und [As(C6H5)4]Se2Cl9

Chloroselenates(IV): Synthesis, Structure, and Properties of [As(C₆H₅)₄]₂Se₂Cl₁₀ and [As(C₆H₅)₄]Se₂Cl₉ The Se₂Cl₁₀^2? and Se₂Cl₉^? anions were prepared, as the first dinuclear haloselenates(IV), from the reaction of (SeCl₄)₄ with stoichiometric quantities of chloride ions in POCl₃ solutions; they were isolated as yellow crystalline As(C₆H₅)₄⁺ salts. Complete X-ray structural analyses at ?130°C of [As(C₆H₅)₄]₂Se₂Cl₁₀ ( 1 ) (space group P1 , a = 10.296(7), b = 11.271(6), c = 12.375(8) Å, = 74.17(5)°, α = 81.38(5)°, β = 67.69(4)°, V = 1276 ų) and of [As(C₆H₅)₄]Se₂Cl₉ ( 2 ) (space group P2₁/n, a = 12.397(5), b = 17.492(6), c = 14.235(4) Å, α 93.25(3)°, V = 3082 ų) show in both cases two distorted octahedral SeCl₆ groups connected through a common edge in 1 and a common face in 2 . The terminal Se? Cl bonds (average 2.317 Å in 1 , 2.223 Å in 2 ) are much shorter than the Se? Cl bridges (av. 2.661 Å in 1 , 2.652 Å in 2 ). The stereochemical activity of the Se^IV lone electron pair causes severe distortion of the central Se₂Cl₂ ring in the centrosymmetric Se₂Cl₁₀^2? ion. The vibrational spectra of the anions are reported.     

Potassium sodium tin selenide,K3NaSn3Se8

The title compound, tripotassium sodium tritin octaselenide, K₃NaSn₃Se₈, has a molecular (zero‐dimensional) structure containing trimeric [Sn₃Se₈]^4? units which consist of three edge‐sharing SnSe₄ tetrahedra. The [Sn₃Se₈]^4? anions and the tetrahedrally coordinated Na⁺ cations are arranged in an alternating fashion along the c axis to form SiS₂‐like chains, which are then separated by eight‐coordinate K⁺ cations. The Sn—Se bond distances are normal, being in the range 2.477 (1)–2.612 (1) Å.     

Influence of the Counterions on the Structures of Ternary Zn/Sn/Se Anions: Synthesis and Properties of [Rb10(H2O)14.5][Zn4(μ4‐Se)2(SnSe4)4] and [Ba5(H2O)32][Zn5Sn(μ3‐Se)4(SnSe4)4]

Reactions of rubidium or barium salts of the ortho‐selenostannate anion, [Rb₄(H₂O)₄][SnSe₄] ( 1 ) or [Ba₂(H₂O)₅][SnSe₄] ( 2 ) with Zn(OAc)₂ or ZnCl₂ in aqueous solution yielded two novel compounds with different ternary Zn/Sn/Se anions, [Rb₁₀(H₂O)_14.5][Zn₄(μ₄‐Se)₂(SnSe₄)₄] ( 3 ) and [Ba₅(H₂O)₃₂][Zn₅Sn(μ₃‐Se)₄(SnSe₄)₄] ( 4 ). 1 – 4 have been determined by means of single crystal X‐ray diffraction: 1 : triclinic space group lattice dimensions at 203 K: a = 8.2582(17) Å, b = 10.634(2) Å, c = 10.922(2) Å, α = 110.16(3)°, β = 91.74(3)°, γ = 97.86(3)°, V = 888.8(3) ų; R₁ [I > 2σ(I)] = 0.0669; wR₂ = 0.1619; 2 : orthorhombic space group Pnma; lattice dimensions at 203 K: a = 17.828(4) Å, b = 11.101(2) Å, c = 6.7784(14) Å, V = 1341.5(5) ų; R₁ [I > 2σ(I)] = 0.0561; wR₂ = 0.1523; 3 : triclinic space group ; lattice dimension at 203 K: a = 17.431(4) Å, b = 17.459(4) Å, c = 22.730(5) Å, α = 105.82(3)°, β = 99.17(3)°, γ = 90.06(3)°, V = 6563.1(2) ų; R₁ [I > 2σ(I)] = 0.0822; wR₂ = 0.1782; 4 : monoclinic space group P2₁/c; lattice dimensions at 203 K: a = 25.231(5) Å, b = 24.776(5) Å, c = 25.396(5) Å, β = 106.59(3)°, V = 15215.0(5) ų; R₁ [I > 2σ(I)] = 0.0767; wR₂ = 0.1734. The results serve to underline the crucial role of the counterion for the type of ternary anion to be observed in the crystal. Whereas Rb⁺(aq) stabilizes a P1‐type Zn/Sn/Se supertetrahedron in 3 like K⁺, the Ba²⁺(aq) ions better fit to an anionic T3‐type Zn/Sn/Se cluster arrangement as do Na⁺ ions. It is possible to estimate a radius:charge ratio for the stabilization of the two structural motifs.     

Synthesis and characterization of new homologue multinary selenides,M2Sb5Bi5Se17 (M = Sn,Pb)

New quaternary selenides M₂Sb₅Bi₅Se₁₇ (M = Sn, Pb) were synthesized using solid-state sintering reactions that crystallize in the monoclinic system with C2/m (No. 12) space group with lattice parameters a = 27.914(7) Å, b = 4.0804(11) Å, c = 15.512(4) Å, and β = 114.881(9)° for M = Sn, and a = 27.987(3) Å, b = 4.1062(5) Å, c = 15.6372(19) Å, and β = 115.318(3)° for M = Pb, respectively. The crystal structure is related to a homologous series [A⁺²_2x−4B⁺³₄ Se⁻²_2x−2][B⁺³_2y−2Se⁻²_3y−3] with (x, y) = (3, 4) that contains building units of two-dimensional slabs of NaCl¹¹¹-type [Sb₂Bi₄Se₁₁] separated by 1D ribbons NaCl¹⁰⁰-type [Pb₂Sb₃BiSe₆]. The NaCl¹¹¹ unit contains edge-shared octahedra filled with Sb³⁺ and Bi³⁺ cations, which are parallel and overlapped to form a step-layer 2D network stacking alone [001]. The NaCl¹⁰⁰ type ribbons containing Pb²⁺ and Sb³⁺ in square or trigonal pyramidal environments with the general formula [M₆Se₆] filled in the space between 2D layers of NaCl¹¹¹ units. The conductivity measurement revealed semiconducting property with band gaps of ~0.1 eV. Pb₂Sb₅Bi₅Se₁₇ exhibits low thermal conductivity 3,000 μW cm⁻¹ K⁻¹ in a temperature range of 300–480 K.     

Selenogermanate aus wäßriger Lösung: Darstellung und Struktur von Na4Ge2Se6 · 16 H2O

Selenogermanates from Aqueous Solution: Preparation and Structure of Na₄Ge₂Se₆ · 16 H₂O Selenogermanates(IV) are prepared from aqueous solutions by reaction of alkali selenides with GeSe₂. Na₄Ge₂Se₆ · 16 H₂O, being obtained from stoichiometric 1:1 quantities, is characterized by a complete X-ray structure analysis and by vibrational spectra. The compound is monoclinic (P2₁/c) with a = 9.894(4), b = 11.781(5), c = 12.225(6) Å, β = 92.90(4)°, Z = 2. It contains isolated Ge₂Se₆^4? anions consisting of two edge-sharing tetrahedra [Ge? Se 2.303(2)–2.419(2) Å] which are in contact to the hydrated octahedral [Na(H₂O)₆]⁺ ions through Se ? H? O bridges within an extensive hydrogen bridge system. Raman-active vibrations are observed at 306, 294, 207, 139, and 121 cm^?1. Adamantane-like Ge₄Se₁₀^4? can be prepared in a similar way as Ge₂Se₆^4? if a 1:2 molar ratio of alkali selenide to GeSe₂ is employed.     

Synthesis and Structure of [Sn4Se11]6–, [Sn2Se52–], and [Sn3Se72–] – Model Anions for the Solventothermal Reaction Pathway to Lamellar Selenidostannates(IV)

Reaction of A₂CO₃ (A = K, Rb) with Sn and Se in an H₂O/CH₃OH mixture at 115–130°C affords the isotypic selenidostannates(IV) A₆Sn₄Se₁₁ _. xH₂O (A = K, x = 8) 1 and 2 whose discrete [Sn₄Se₁₁]^6– anions each contain two corner‐bridged ditetrahedral [Sn₂Se₆]^4– species. Similar reaction conditions with A = Cs afford Cs₂Sn₂Se₅ _. H₂O ( 3a ) and Cs₂Sn₂Se₅ ( 3b ) in which such [Sn₂Se₆]^4– building blocks are connected through common Se atoms into infinite [Sn₂Se₅^2–] chains. The [Sn₃Se₇^2–] ribbons of (Et₄N)₂Sn₃Se₇ ( 4 ), formed by treating (Et₄N)I with Sn and Se in methanol at 130°C, can be regarded as resulting from the condensation of [Sn₂Se₅^2–] chains with molecular [SnSe₄]^4– anions. The anions [Sn₄Se₁₁]^6–, [Sn₂Se₅^2–], and [Sn₃Se₇^2–] represent the products of individual reaction steps on the potential condensation pathway of [Sn₂Se₆]^4– to the lamellar selenidostannates(IV) [Sn₄Se₉^2–] or [Sn₃Se₇^2–].     

Polychalcogenoaurates(I) with pseudo-onedimensional structures: Preparation and crystal structure of Cs2Au2Se3

Cs₂Au₂Se₃ was obtained as red platelike crystals by reacting a stoichiometric mixture of Cs₂Se, Au and Se at 670K. It crystallizes in space group C2/c, Z = 4 with a = 9.769(5) Å, b = 13.44(1) Å, c = 7.178(3) Å, β = 90.69(1)°. The crystal structure was determined from single crystal data and refined to a conventional R of 0.042 for 674 Fo's and 34 variables. The characteristic structural feature of this new selenoaurate is the formation of infinite helical anionic chains, _∞¹-[AuSeAuSe₂]²⁻ which run parallel to [001] and are separated by the alkali cations. The average Au-Se bond length is 2.402 Å, the bond length in the Se₂-unit is 2.436 Å. Au…Au contacts of 3.200 Å, are formed within the anionic chains. The cesium atoms are coordinated to seven Se in an irregular configuration.     

Selenoarsenate aus wäßriger Lösung. Die Kristallstruktur von Na3AsO3Se · 12 H2O und Na3AsSe4 · 9H2O

Selenoarsenates from Aqueous Solutions. Crystal Structures of Na₃AsO₃Se · 12 H₂O and Na₃AsSe₄ · 9 H₂O Selenoarsenates are obtained from aqueous solutions as colourless hydrated salts by reactions either of As₂O₃ with NaOH and selenium or of Na₂Se with As₂Se₃ and selenium under strictly anaerobic conditions. Besides of tetrahedral anions AsO₃Se³⁻ and AsSe₄³⁻, extensive hydrogen bridge systems with rather strong O H …︁s Se bonds determine the structures. Na₃AsO₃Se · 12 H₂O is orthorhombic (P2₁2₁2₁) with a = 9.220(3), b = 13.018(3), c = 14.048(4) Å, Z = 4. Cubic Na₃AsSe₄ ·s 9H₂O (P2₁3) with a = 12.149(3) Å is isotypic to Schlippe's salt, Na₃SbS₄ · 9 H₂O. The full X-ray structure analyses from four-circle diffractometer data show the selenium atoms of the AsO₃Se³⁻ and AsSe₄³⁻ anions to be H-acceptors in six Se …︁ H O hydrogen bridges with d(Se …︁ O) = 3.357–3.693 Å and d(Se …︁ H) = 2.47–2.89 Å. The As Se bond in AsO₃Se³⁻ (2.283 Å) is shorter than in AsSe₄³⁻ (2.319 Å).     

Synthesis of the One-dimensional Compound (Ph4P)[In(P2Se6)] in a Ph4P+-Containing Selenophosphate Flux,and Structure of [In(P2Se6)2]5– – a Discrete Molecular Fragment of the [In(P2Se6)]nn– Chain

The reaction of one equivalent of In with a molten flux of (Ph₄P)₂Se₅ and P₂Se₅ (1 : 2), at 250 °C gave the (Ph₄P)[In(P₂Se₆)] ( I ). Stoichiometric elemental synthesis at 750 °C produced the Cs₅In(P₂Se₆)₂ ( II ). The thin, yellow crystals of ( I ), and the irregular, dark orange crystals of ( II ), appear to be air- and water-stable. Compound ( I ) crystallizes in the monoclinic space group C2/c (no. 15) and at 23 °C: a = 23.127(7) Å, b = 6.564(1) Å, c = 19.083(3) Å, β = 97.42(2)°, V = 2873(1) ų, Z = 4, final R/R_w = 4.4/5.2%. Compound ( II ) crystallizes in the tetragonal space group P4₂/m (no. 84) and at 23 °C: a = b = 13.886(1) Å, c = 7.597(2) Å, V = 1464.9(3) ų, Z = 2, final R/R_w = 3.9/5.1%. Compound ( I ) contains infinite [In(P₂Se₆)]_n^n– with a structure related to that of K₂FeP₂Se₆. Compound ( II ) contains the discrete [In(P₂Se₆)₂]^5– which can be viewed as a fragment of the [In(P₂Se₆)]_n^n– chain.     

Selenostannate aus wäßriger Lösung: Darstellung und Struktur von Na4SnSe4 · 16 H2O

Selenostannates from Aqueous Solutions: Preparation and Structure of Na₄SnSe₄ · 16 H₂0 Pure selenostannates(IV) are prepared from aqueous solutions by reaction of SnSe₂, with alkali selenides, strictly excluding oxygen. Na₄SnSe₄ · 16 H₂O, being obtained from stoicheo-metric 1:2 quantities, is characterized by a complete X-ray structure analysis and by vibrational spectra. The compound is monoclinic (P2₁/m) with a = 8.673(3), b = 16.563(4), c = 8.647(2) Å, β = 92.10(2)°, Z = 2; it contains isolated tetrahedral SnSe₄^4? ions [Sn? Se 2.504(2)?2.527(2) Å, Se? Sn? Se 106.6(1)?111.1(1)°] which are in contact to the hydrated octahedral [Na(OH₂)₆]⁺ ions through Se…?H? O bridges within an extensive hydrogen bridge system. The stretching vibrations of the SnSe₄^4? ion are observed at 195 (n?₁) and 252 cm^?1 (n?₃). The stretching force constant is approximately 1.59 mdyn/Å.     

Fe4Si2Sn7O16: Eine Kombination von FeSn6-Oktaedern mit Schichten von (Fe3Sn)O6-Oktaedern; Präparation,Eigenschaften und Kristallstruktur [1]

Fe₄Si₂Sn₇O₁₆: A Combination of FeSn₆-Octahedra with Layers of (Fe₃Sn)O₆-Octahedra; Preparation, Properties, and Crystal Structure Fe₄Si₂Sn₇O₁₆ has been prepared by a solid state reaction at 900 °C from a mixture of Fe₂O₃, SnO₂, Sn, and Si. The compound is a paramagnetic semiconductor. Results of Mössbauer and suszeptibility measurements as well as bond length-bond strength calculations lead to the possible ionic formulation Fe₄²⁺Si₂⁴⁺Sn₁²⁺Sn₁⁴⁺O₁₆^2–. The compound crystallizes in the trigonal space group P3m1 (no. 164), with one formula unit per cell. Lattice parameters obtained by powder measurements are: a = 6.8243(6) Å, c = 9.1404(6) Å, γ = 120°, V = 368.6(1) ų. The structure consists of layers of edge linked oxygen octehedra exactly centered by Sn and Fe in the ratio 1 : 3. Three plains of isolated SiO₄ tetrahedra, FeSn₆ octahedra and again SiO₄ terahedra are inserted between two such layers. The layers are stacked along [001] and linked three-dimensionally by oxygen.