Donor–acceptor‐based poly(toluidine‐co‐chloroaniline)s: Synthesis and characterization

A series of poly(o‐/m‐toluidine‐co‐o‐/m‐chloroaniline) copolymers of different compositions were synthesized by an emulsion method with ammonium persulfate as the oxidant. The conductivity of the copolymers was two to five orders of magnitude higher than that of the homopolymers poly(o‐toluidine) and poly(m‐chloroaniline). Among the copolymers, the copolymer of o‐toluidine and m‐chloroaniline exhibited a maximum conductivity of 0.14 S cm^?1. The conductivity of these copolymers was also higher than that of poly(aniline‐co‐chloroaniline). The properties of the copolymers were greatly influenced by the positions of the substituents and the concentrations of the individual monomers in the feed. All the copolymers were completely soluble in polar solvents such as dimethyl sulfoxide and showed higher heat stability as the chloroaniline concentration increased. These effects could be interpreted in terms of extensive hydrogen bonding and interchain linking and, therefore, higher electron delocalization in these copolymers due to the presence of electron‐rich toluidine rings adjacent to electron‐deficient chloroaniline. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1579–1587, 2005     

Sensitive determination of chloroanilines in water samples by hollow fiber‐based liquid‐phase microextraction prior to capillary electrophoresis with amperometric detection

A hollow fiber‐based liquid‐phase microextraction method has been developed for enrichment of trace chloroanilines in water samples. Target analytes including aniline, three mono‐chlorinated aniline isomers (o‐chloroaniline, m‐chloroaniline, and p‐chloroaniline) and four mono‐chlorinated methylaniline isomers (2‐chloro‐4‐methylaniline, 3‐chloro‐4‐methylaniline, 4‐chloro‐2‐methylaniline, and 5‐chloro‐2‐methylaniline) were determined by CE with amperometric detection after microextraction. Several factors that affect separation, detection, and extraction efficiency were investigated. Under the optimum conditions, eight aniline compounds could be well separated from other components coexisting in water samples within 25 min, exhibiting a linear calibration over three orders of magnitude (r > 0.998); the obtained enrichment factors were between 51 and 239, and the LODs were in the range of 0.01–0.1 ng/mL. The proposed method has been applied for the analyses of real environmental water and sewage samples with relative recoveries in the range of 83–108%.     

Synthesis and property comparison of isomeric AB‐type homo‐ and copoly(etherimide)s

AB‐type homo‐ and copoly(etherimide)s were prepared by the polymerization of 3‐ and 4‐(3,4‐dicarboxyphenyloxy)aniline hydrochlorides ( 3A and 4A ) at 160 °C in dimethylacetamide in the presence of triethylamine and triphenyl phosphite. After the structures of the polymers were characterized, their solubilities, ultraviolet–visible (UV–vis) absorption behaviors, thermal properties, and crystallinities were measured, and these properties are discussed with respect to the structure of the homopolymers and the composition of the copolymers. Poly(etherimide) (PEI) derived from 3A [PEI( 3A )] was amorphous and soluble in chloroform on heating, whereas that derived from 4A [PEI( 4A )] was crystalline and insoluble in common organic solvents even on heating. In UV–vis absorption spectra, PEI( 4A ) showed a small bathochromic shift relative to N‐phenylphthalimide, but PEI(3A) did not. PEI(3A) revealed a glass‐transition temperature (T_g) at 195 °C, but no T_g was detectable for PEI( 4A ). All the measured physical properties of the copoly(etherimide)s showed a good dependence on their composition between PEI( 3A ) and PEI( 4A ). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 402–410, 2000     

New family of highly emissive,soluble poly(1,4‐fluorenylenevinylene) derivatives: Synthesis and characterization

A new poly(arylene vinylene) derivative, poly(1,4‐fluorenylenevinylene), with the advantages of poly(p‐phenylene vinylene) and polyfluorene (PF), was designed, synthesized, and characterized. The polymer showed a defect‐free structure and a number‐average molecular weight of 32,600. The resulting polymer was thermally stable with a high glass‐transition temperature (200 °C) and was readily soluble in common organic solvents. The polymer film showed a maximum emission at 515 nm and had a photoluminescence quantum yield of 58 ± 5%. A cyclic voltammetry study revealed that the highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels of the polymer were 2.9 and 5.51 eV, respectively. The double‐layer light‐emitting‐diode devices fabricated from the polymer emitted bright green light with a maximum around 515 nm. The device showed a maximum luminous efficiency of 0.13 cd/A and a maximum luminance value of 600 cd/m² at 17 V. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6515–6523, 2005     

Zinc (II), palladium (II) and cadmium (II) complexes containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline derivatives: Synthesis,characterization and methyl methacrylate polymerization

A series of Zn (II), Pd (II) and Cd (II) complexes, [(L) _n MX ₂ ] _m (L = L‐a–L‐c; M = Zn, Pd; X = Cl; M = Cd; X = Br; n, m = 1 or 2), containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline ( L‐a ), 4‐methoxy‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐b ) and 4‐methoxy‐N‐methyl‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐c ) have been synthesized and characterized. The X‐ray crystal structures of Pd (II) complexes [L ₁ PdCl ₂ ] (L = L‐b and L‐c) revealed distorted square planar geometries obtained via coordinative interaction of the nitrogen atoms of pyridine and amine moieties and two chloro ligands. The geometry around Zn (II) center in [(L‐a)ZnCl ₂ ] and [(L‐c)ZnCl ₂ ] can be best described as distorted tetrahedral, whereas [(L‐b) ₂ ZnCl ₂ ] and [(L‐b) ₂ CdBr ₂ ] achieved 6‐coordinated octahedral geometries around Zn and Cd centers through 2‐equivalent ligands, respectively. In addition, a dimeric [(L‐c)Cd(μ ‐ Br)Br] ₂ complex exhibited typical 5‐coordinated trigonal bipyramidal geometry around Cd center. The polymerization of methyl methacrylate in the presence of modified methylaluminoxane was evaluated by all the synthesized complexes at 60°C. Among these complexes, [(L‐b)PdCl ₂ ] showed the highest catalytic activity [3.80 × 10⁴ g poly (methyl methacrylate) (PMMA)/mol Pd hr^?1], yielding high molecular weight (9.12 × 10⁵ g mol^?1) PMMA. Syndio‐enriched PMMA (characterized using ¹H‐NMR spectroscopy) of about 0.68 was obtained with T_g in the range 120–128°C. Unlike imine and amine moieties, the introduction of N‐methyl moiety has an adverse effect on the catalytic activity, but the syndiotacticity remained unaffected.     

Flexibilized styrene‐N‐substituted maleimide copolymers. I. Multiblock copolymers prepared from styrene‐maleimide telechelics and polytetrahydrofuran

Telechelic copolymers of styrene and different N‐substituted‐maleimides (SMIs) with a molecular weight of 2000–8000 g/mol were synthesized using the starved‐feed‐reactor technique and were nearly bifunctional when the monomer feed had a high styrene concentration. The COOH‐terminated rigid SMI blocks were polycondensated with OH‐terminated poly(tetrahydrofuran) (PTHF) blocks, with a molecular weight of 250–1000 g/mol, which are the flexible parts in the generated homogeneous multiblock copolymer. The entanglement density, which is closely related to the toughness of materials, increased in these flexible SMI copolymers (ν_e = 5.2 · 10²⁵ m⁻³) compared to the unflexibilized ones (ν_e = 2.4 · 10²⁵ m⁻³). The glass transition temperature of these flexibilized, single‐phase multiblock copolymers was still high enough to qualify them as engineering plastics. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3550–3557, 2000     

Coupling selectivity in the radical‐controlled oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) complex

Various effects on the coupling selectivity of the oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) halogeno complex [Cu(tacn)X₂] are described. With respect to the amount of the catalyst and the nature of the halide ion (X) of Cu(tacn)X₂, the coupling selectivity hardly changed. The Cu(tacn) catalyst possessed a turnover number greater than 1860. As the temperature of the reaction and the polarity of the reaction solvent were elevated, the C O coupling at the o‐position increased, but the C C coupling was not involved. For the polymerization in toluene at 80 °C, poly(1,4‐phenylene oxide), obtained as a methanol‐insoluble part, showed the highest number‐average molecular weight of 4000 with a melting point (T_m) of 195 °C. Only a slight change in the coupling selectivity was observed in the presence or absence of hindered amines as the base. Surprisingly, however, the C O selectivity decreased from 100 to 24% with less hindered amines, indicating that the selectivity drastically changed from a preference for C O coupling to a preference for C C coupling. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4792–4804, 2000     

Density functional theory study of p‐chloroaniline adsorption on Pd surfaces and clusters

The adsorption mode of aromatic molecules on transition metal surfaces plays a key role in their catalytic transformation. In this study, by means of density functional theory calculations, we systematically investigate the adsorption of p‐chloroaniline on a series of Pd surfaces, including stepped surfaces, flat surfaces, and clusters. The adsorption energies of p‐chloroaniline on these substrates [Pd(221), Pd(211), Pd(111), Pd(100), Pd₁₃‐icosahedral, Pd₁₃‐cubo‐octahedron, Pd₅₅] are ?1.90, ?2.13, ?1.70, ?2.11, ?2.53, ?2.65, ?2.23 eV, respectively. Benzene ring is adsorpted on catalyst rather than amine group in p‐chloroaniline molecular. A very good linear relationship is further found between the adsorption energies of p‐chloroaniline and the d‐band center of both Pd surfaces and clusters. The lower of d‐band center of Pd models, the stronger adsorption of p‐chloroaniline on catalysts. In addition, the frontier molecular orbital and density of states analysis explain the adsorption energy sequence: cluster Pd₁₃ > stepped Pd(221) surface > flat Pd(111) surface. © 2014 Wiley Periodicals, Inc.     

Synthesis and characterization of conducting poly(aniline‐co‐o‐aminophenethyl alcohol)s

Poly(o‐aminophenethyl alcohol) and its copolymers containing the aniline unit were synthesized in aqueous hydrochloric acid medium by chemical oxidative polymerization. The chemical composition of these novel polymers was determined spectroscopically, and their viscosities were measured. These polymers exhibit good solubility in organic solvents that is attributed mainly to the polar hydroxyethyl side groups. Their structures (chain conformation and morphological structure) and properties (conductivity, electrochemical characteristics, glass transition, and degradation behavior) were characterized and then interpreted on the basis of the chemical composition along with the electronic and steric hindrance effects associated with the hydroxyethyl side group. Overall, the side group has a significant effect on the polymerization and influences the structure, chain conformation, and properties of the resultant polymer. The poly(aniline‐co‐o‐aminophenethyl alcohol)s containing 20–40 mol % o‐aminophenethyl alcohol units are potential conducting materials for microelectronic and electromagnetic shielding applications because they are easier to process than polyaniline but retain its beneficial properties. These polymers can also be used as a functional conducting polymer intermediate owing to the reactivity of the side group. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 983–994, 2002     

Core–shell functionalized MWCNT/poly(m‐aminophenol) nanocomposite with large dielectric permittivity and low dielectric loss

Core–shell carboxyl‐functionalized multiwall carbon nanotube (c‐MWCNT)/poly(m‐aminophenol) (PmAP) nanocomposite were prepared through in‐situ polymerization of m‐aminophenol (m‐AP) in the presence of MWCNTs, and explicated as a dielectric material for electronic applications. The formation of thin PmAP layer on individual c‐MWCNT with excellent molecular level interactions at interfaces was confirmed by morphological and spectroscopic analyses. Here we conducted a comparative study of the dielectric performances of PmAP based nanocomposite films with pristine MWCNTs and c‐MWCNTs as fillers. Compared to PmAP/MWCNT nanocomposites, the PmAP/c‐MWCNT nanocomposites exhibited higher dielectric permittivity and lower dielectric loss. The well dispersed c‐MWCNTs in PmAP/c‐MWCNT nanocomposite produce huge interfacial area together with numerous active polarized centers (crystallographic defects), which in turn intensified the Maxwell‐Wagner‐Sillars (MWS) effect based on excellent molecular level interactions and thus, produce large dielectric permittivity (8810 at 1 kHz). The percolation threshold of PmAP/c‐MWCNT nanocomposites is found lower than that of the PmAP/MWCNT nanocomposites, which could be attributed to homogeneous distribution of c‐MWCNTs and strong c‐MWCNT//PmAP interfacial interactions in the nanocomposites. Copyright © 2016 John Wiley & Sons, Ltd.     

RAFT synthesis of a water‐soluble triblock copolymer of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) using a macromolecular chain transfer agent in aqueous solution

Triblock copolymers of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) with narrow molecular weight distribution (M_w/M_n = 1.28–1.40) and well‐defined structure have been synthesized in aqueous solution at 70 °C via reversible addition‐fragmentation chain transfer polymerization. Poly(ethylene glycol) (PEG) capped with 4‐cyanopentanoic acid dithiobenzoate end groups was used as the macro chain transfer agent (PEG macro‐CTA) for sole monomer sodium 4‐styrenesulfonate. The reaction was controllable and displayed living polymerization characteristics and the triblock copolymer had designed molecular weight. The reaction rate depended strongly on the CTA and initiator concentration ratio [CTA]₀/[ACPA]₀: an increase in [CTA]₀/[ACPA]₀ from 1.0 to 5.0 slowed down the polymerization rate and improved the molecular weight distribution with a prolonged induction time. The polymerization proceeded, following first‐order kinetics when [CTA]₀/[ACPA]₀ = 2.5 and 5.0. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3698–3706, 2007     

Preparation of water‐soluble,syndiotacticity‐rich,low molecular weight poly(vinyl alcohol) microfibrils in high yields with the low‐temperature polymerization of vinyl pivalate in tetrahydrofuran and saponification

To prepare water‐soluble, syndiotacticity‐rich poly(vinyl alcohol) (PVA) microfibrils for various industrial applications, we synthesized syndiotacticity‐rich, low molecular weight PVA by the solution polymerization of vinyl pivalate (VPi) in tetrahydrofuran (THF) at low temperatures with 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN) as an initiator and successive saponification of poly(vinyl pivalate) (PVPi). Effects of the initiator and monomer concentrations and the polymerization temperature were investigated in terms of the polymerization behaviors and molecular structures of PVPi and the corresponding syndiotacticity‐rich PVA. The polymerization rate of VPi in THF was proportional to the 0.91 power of the ADMVN concentration, indicating the heterogeneous nature of THF polymerization. The low‐temperature solution polymerization of VPi in THF with ADMVN proved to be successful in obtaining water‐soluble PVA with a number‐average degree of polymerization (P_n) of 300–900, a syndiotactic dyad content of 60–63%, and an ultimate conversion of VPi into PVPi of over 75%. Despite the low molecular weight of PVA with P_n = 800, water‐soluble PVA microfibrillar fibers were prepared because of the high level of syndiotacticity. In contrast, for PVA with P_n = 330, shapeless and globular morphologies were observed, indicating that molecular weight has an important role in the in situ fibrillation of syndiotacticity‐rich PVA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1103–1111, 2002     

Novel synthesis of biodegradable star poly(ethylene glycol)‐block‐poly(lactide) copolymers

Biodegradable star‐shaped poly(ethylene glycol)‐block‐poly(lactide) copolymers were synthesized by ring‐opening polymerization of lactide, using star poly(ethylene glycol) as an initiator and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature. Two series of three‐ and four‐armed PEG‐PLA copolymers were synthesized and characterized by gel permeation chromatography (GPC) as well as ¹H and ¹³C NMR spectroscopy. The polymerization under the used conditions is very fast, yielding copolymers of controlled molecular weight and tailored molecular architecture. The chemical structure of the copolymers investigated by ¹H and ¹³C NMR indicates the formation of block copolymers. The monomodal profile of molecular weight distribution by GPC provided further evidence of controlled and defined star‐shaped copolymers as well as the absence of cyclic oligomeric species. The effects of copolymer composition and lactide stereochemistry on the physical properties were investigated by GPC and differential scanning calorimetry. For the same PLA chain length, the materials obtained in the case of linear copolymers are more viscous, whereas in the case of star copolymer, solid materials are obtained with reduction in their T_g and T_m temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3966–3974, 2007     

Copolymerization of poly(vinyl alcohol)‐graft‐poly(1,4‐dioxan‐2‐one) with designed molecular structure by a solid‐state polymerization method

Poly(vinyl alcohol)‐graft‐poly(1,4‐dioxan‐2‐one) (PVA‐g‐PPDO) with designed molecular structure was synthesized by a solid‐state polymerization. The solid‐state copolymerization was preceded by a graft copolymerization of PDO initiated with PVA as a multifunctional initiator, and Sn (Oct)₂ as a coininitiator/catalyst in a homogeneous molten state. The polymerization temperature was then decreased and the copolymerization was carried out in a solid state. The products prepared by solid‐state polymerization were characterized by ¹H NMR and DSC, and were compared with those synthesized in the homogeneous molten state. The degree of polymerization (D_p), degree of substitution (D_s), yield and the average molecular weight of the graft copolymer with different molecular structure were calculated from the ¹H NMR spectra. The results show that the crystallization process during the solid‐state polymerization may suppress the undesirable inter‐ or intramolecular side reactions, then resulting in a controlled molecular structure of PVA‐g‐PPDO. The results of DSC measurement show that the molecular structures determine the thermal behavior of the PVA‐g‐PPDO. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3083–3091, 2006     

Synthesis of metal‐free poly(1,4‐dioxan‐2‐one) by enzyme‐catalyzed ring‐opening polymerization

To avoid the harmful effects of metallic residues in poly(1,4‐dioxan‐2‐one) (PPDO) for medical applications, the enzymatic polymerization of 1,4‐dioxan‐2‐one (PDO) was carried out at 60 °C for 15 h with 5 wt % immobilized lipase CA. The lipase CA, derived from Candida antarctica, exhibited especially high catalytic activity. The highest weight‐average molecular weight (M_w = 41,000) was obtained. The PDO polymerization by the lipase CA occurred because of effective enzyme catalysis. The water component appeared to act not only as a substrate of the initiation process but also as a chain cleavage agent. A slight amount of water enhanced the polymerization, but excess water depressed the polymerization. PPDO prepared by enzyme‐catalyzed polymerization is a metal‐free polyester useful for medical applications. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1560–1567, 2000     

Synthesis,characterization, and stability of carbodiimide groups in carbodiimide‐functionalized latex dispersions and films

Cyclohexylcarbodiimidoethyl methacrylate (CCEMA) and t‐butylcarbodiimidoethyl methacrylate (t‐BCEMA) were prepared in a two‐step synthesis. These monomers were then used to prepare carbodiimide‐functionalized PBMA and PEHMA latex particles, employing two‐stage emulsion polymerization, with the carbodiimide–methacrylate monomers being introduced only in the second stage under monomer‐starved conditions. During emulsion polymerization, the carbodiimide moiety ( NCN ) was found to be unstable at pH 4, but stable when the pH of the dispersion was increased to 8, using NaHCO₃ as the buffer. Survival of  NCN group against hydrolysis during the polymerization, and during storage in the dispersion, was enhanced by using EHMA as the comonomer (more hydrophobic) and the t‐butyl carbodiimide derivative. The t‐butyl group provides more steric hindrance to the hydrolysis reaction. A decrease in the reaction temperature from 80°C to 60°C was also found to increase the extent of  NCN group incorporation during emulsion polymerization. Under ideal conditions, more than 98% of the  NCN groups in the monomer feed are successfully incorporated into the latex. When these latex particles are mixed with a  COOH containing latex and allowed to dry, polymer diffusion leading to crosslinking occurs. Films annealed at 60°C reach a gel content of 60% in 10 h. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 855–869, 2000     

Graphene oxide‐induced polymerization and crystallization to produce highly conductive polyaniline/graphene oxide composite

Graphene oxide (GO)–polyaniline (PANI) composite is synthesized by in situ polymerization of aniline in the presence of GO as oxidant, resulting in highly crystalline and conductive composite. Fourier transform infrared spectrum confirms aniline polymerization in the presence of GO without using conventional oxidants. Scanning electron microscopic images show the formation of PANI nanofibers attached to GO sheets. X‐ray diffraction (XRD) patterns indicate the presence of highly crystalline PANI. The sharp peaks in XRD pattern suggest GO sheets not only play an important role in the polymerization of aniline but also in inducing highly crystalline phase of PANI in the final composite. Electrical conductivity of doped GO–PANI composite is 582.73 S m^?1, compared with 20.3 S m^?1 for GO–PANI obtained by ammonium persulfate assisted polymerization. The higher conductivity appears to be the result of higher crystallinity and/or chemical grafting of PANI to GO, which creates common conjugated paths between GO and PANI. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1545–1554     

Effect of blending ratio and oligomer structure on the thermal transitions of stereocomplexes consisting of a D‐lactic acid oligomer and poly(L‐lactide)

Poly(lactic acid) (PLA) stereocomplexes have high potential as renewable materials for advanced polymer applications, mainly due to their high melting temperature (T_m, typically 230–240°C). The properties of PLA stereocomplexes consisting of linear high molar mass homopolymers have been studied extensively in the past, but the available information about the possibilities to affect the thermal properties of the stereocomplex by varying the structure of the blend components has not been sufficient. Novel stereocomplexes containing linear or star‐shaped D ‐lactic acid (D ‐LA) oligomers and high molar mass poly(L ‐lactide) (L‐ PLA) were thus prepared. The T_m and melting enthalpy (ΔH_m) of the racemic crystallites were found to depend strongly on both the blending ratio and the arm‐length of the D ‐lactic acid oligomer. The preparation method of the oligomers, i.e. step‐growth polymerization or ring‐opening polymerization (ROP), did not affect the T_m or ΔH_m of the blends significantly. Slightly higher ΔH_m values were, however, obtained, when linear oligomers were used. The results thus indicated that the T_m and ΔH_m of PLA stereocomplexes could be optimized, simply by selecting a D ‐LA oligomer having a suitable arm‐length and structure as the other blend component. The possibility to adjust the melting behavior of the stereocomplex blend is a significant advantage and could make PLA suitable for a wider range of products used at elevated temperatures. Copyright © 2010 John Wiley & Sons, Ltd.     

Substituent effects on the polycondensation of quinones with aromatic amines to form poly(quinone imine)s

The effect of alkyl groups on the polycondensation of aromatic diamines and quinones to form poly(quinone imine)s was investigated. Models were synthesized under standard conditions: 1 equiv of quinone was reacted with 2 equiv of aniline in the presence of titanium tetrachloride and 1,4‐diazabicyclo[2.2.2]octane. Only modest yields of diimines were obtained when alkyl substituents were introduced. Likewise, alkyl substituents were harmful in the polycondensation of both anthraquinones and benzoquinones with aromatic diamines. As for fluorine substituents, model reactions with either 1,5‐difluoroanthraquinone or 1,4‐difluoroanthraquinone with aniline proceeded in high yields. These model compounds for aromatic poly(quinone imine)s were characterized with ¹H NMR spectroscopy, ¹⁹F NMR spectroscopy, variable‐temperature ¹H NMR spectroscopy, and X‐ray crystal structure determination. Polymers of the difluoroanthraquinones with aromatic diamines were obtained in high yields, although not in high molecular weights, and no stereocontrol was found. Both p‐benzoquinones and anthraquinones were used as monomers in these polymerizations, and a fundamental difference in reactivity was observed. With the former, the polymerization behaved as a classical polycondensation and demanded exact reagent equivalence. With the anthraquinones, however, the polymerization proceeded by a condensation chain polymerization and was much more forgiving. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 43–54, 2002     

Synthesis of new amphiphilic diblock copolymers containing poly(ethylene oxide) and poly(α‐olefin)

This article discusses an effective route to prepare amphiphilic diblock copolymers containing a poly(ethylene oxide) block and a polyolefin block that includes semicrystalline thermoplastics, such as polyethylene and syndiotactic polystyrene (s‐PS), and elastomers, such as poly(ethylene‐co‐1‐octene) and poly(ethylene‐co‐styrene) random copolymers. The broad choice of polyolefin blocks provides the amphiphilic copolymers with a wide range of thermal properties from high melting temperature ～270 °C to low glass‐transition temperature ～?60 °C. The chemistry involves two reaction steps, including the preparation of a borane group‐terminated polyolefin by the combination of a metallocene catalyst and a borane chain‐transfer agent as well as the interconversion of a borane terminal group to an anionic (? O^?K⁺) terminal group for the subsequent ring‐opening polymerization of ethylene oxide. The overall reaction process resembles a transformation from the metallocene polymerization of α‐olefins to the ring‐opening polymerization of ethylene oxide. The well‐defined reaction mechanisms in both steps provide the diblock copolymer with controlled molecular structure in terms of composition, molecular weight, moderate molecular weight distribution (M_w/M_n < 2.5), and absence of homopolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3416–3425, 2002