Living cationic polymerization of isobutylene coinitiated by FeCl3 in the presence of isopropanol

A simple but effective FeCl₃‐based initiating system has been developed to achieve living cationic polymerization of isobutylene (IB) using di(2‐chloro‐2‐propyl) benzene (DCC) or 1‐chlorine‐2,4,4‐trimethylpentane (TMPCl) as initiators in the presence of isopropanol (iPrOH) at ?80 °C for the first time. The polymerization with near 100% of initiation efficiency proceeded rapidly and completed quantitatively within 10 min. Polyisobutylenes (PIBs) with designed number‐average molecular weights (M_n) from 3500 to 21,000 g mol^?1, narrow molecular weight distributions (MWD, M_w/M_n ≤ 1.2) and near 100% of tert‐Cl terminal groups could be obtained at appropriate concentrations of iPrOH. Livingness of cationic polymerization of IB was further confirmed by all monomer in technique and incremental monomer addition technique. The kinetic investigation on living cationic polymerization was conducted by real‐time attenuated total reflectance Fourier transform infrared spectroscopy. The apparent constant of rate for propagation (k_p^A) increased with increasing polymerization temperature and the apparent activation energy (ΔE_a) for propagation was determined to be 14.4 kJ mol^?1. Furthermore, the triblock copolymers of PS‐b‐PIB‐b‐PS with different chain length of polystyrene (PS) segments could be successfully synthesized via living cationic polymerization with DCC/FeCl₃/iPrOH initiating system by sequential monomer addition of IB and styrene at ?80 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cationic polymerization of hydrocarbon monomers induced by complexes of acyl halides with Lewis acids 5. Polymerization of isobutylene in the presence of the complexes of benzoyl chloride with aluminum bromide

Polymerization of isobutylene inn-hexane at -78 °C in the presence of the complex of benzoyl chloride with AIBr₃ (1 : 2) was investigated. The results were compared to those obtained previously for the polymerization of this monomer induced by the complex of acetyl bromide with AlBr₃. Both complexes initiate the polymerization only by acyl cations. The number average molecular weight (M _n ) of the polymer linearly increases as the degree of isobutylene conversion increases. The polymerization restarts after repeated addition of the monomer, andM _n continues to increase linearly. The efficiency of the initiaton by the benzoyl chloride complex does not exceed 6.2 %; the reaction has the second order with respect to the initiator in the case of PhCOCI · A1₂Br₆; and the chain-propagation rate constant is 13.9 L mol^–1 s t. The use of PhCOCI Al₂Br₆ as the initator of the polymerization of isobutylene allows one to prepare macromolecules with very low contents of the terminal C=C double bonds and with narrow molecular weight distributions. Unlike the MeCOBr·AlBr₃ complex, PhCOCl · AlBr₃ does not initiate polymerization of isobutylene.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1175–1179, May, 1996.     

Synthesis of poly(N‐isopropylacrylamide) with a low molecular weight and a low polydispersity index by single‐electron transfer living radical polymerization

The single‐electron transfer living radical polymerization (SET‐LRP) method in the presence of chain transfer agent was used to synthesize poly(N‐isopropylacrylamide) [poly(NIPAM)] with a low molecular weight and a low polydispersity index. This was achieved using Cu(I)/2,2′‐bipyridine as the catalyst, 2‐bromopropionyl bromide as the initiator, 2‐mercaptoethanol as the chain transfer agent (TH), and N,N‐dimethylformamide (DMF) as the solvent at 90 °C. The copper nanoparticles with diameters of 16 ± 3 nm were obtained in situ by the disproportionation of Cu(I) to Cu(0) and Cu(II) species in DMF at 22 °C for 24 h. The molecular weights of poly(NIPAM) produced were significantly higher than the theoretical values, and the polydispersities were less than 1.18. The chain transfer constant (C_tr) was found to be 0.051. Although the kinetic analysis of SET‐LRP in the presence of TH corroborated the characteristics of controlled/living polymerization with pseudo‐first‐order kinetic behavior, the polymerization also exhibited a retardation period (k > k_tr). The influence of molecular weight on lower critical solution temperature (LCST) was investigated by refractometry. Our experimental results explicitly elucidate that the LCST values increase slightly with decreasing molecular weight. Reversibility of solubility and collapse in response to temperature well correlated with increased molecular weight of poly(NIPAM). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Single electron transfer‐living radical polymerization of methyl methacrylate in fluoroalcohol: Dual control over molecular weight and tacticity

The Cu(0)‐mediated single electron transfer‐living radical polymerization (SET‐LRP) of methyl methacrylate (MMA) using ethyl 2‐bromoisobutyrate (EBiB) as an initiator with Cu(0)/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine as a catalyst system in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied. The polymerization showed some living features: the measured number‐average molecular weight (M_n,GPC) increased with monomer conversion and produced polymers with relatively low polydispersities. The increase of HFIP concentration improved the controllability over the polymerization with increased initiation efficiency and lowered polydispersity values. ¹H NMR, MALDI‐TOF‐MS spectra, and chain extension reaction confirmed that the resultant polymer was end‐capped by EBiB species, and the polymer can be reactivated for chain extension. In contrast, in the cases of dimethyl sulfoxide or N,N‐dimethylformamide as reaction solvent, the polymerizations were uncontrolled. The different effects of the solvents on the polymerization indicated that the mechanism of SET‐LRP differed from that of atom transfer radical polymerization. Moreover, HFIP also facilitated the polymerization with control over stereoregularity of the polymers. Higher concentration of HFIP and lower reaction temperature produced higher syndiotactic ratio. The syndiotactic ratio can be reached to about 0.77 at 1/1.5 (v/v) of MMA/HFIP at ?18 °C. In conclusion, using HFIP as SET‐LRP solvent, the dual control over the molecular weight and tacticity of PMMA was realized. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6316–6327, 2009     

13C NMR and electron spin resonance analyses of the radical polymerization of diisopropyl itaconate

Radical polymerizations of dialkyl itaconates were performed in benzene at 50 °C. The ¹³C NMR spectra of the obtained polymers indicated that intramolecular chain‐transfer reaction had taken place more frequently in the polymerizations of itaconates with bulkier ester groups as follows: isopropyl (i‐Pr) > n‐butyl (n‐Bu) ≈ ethyl (Et) > methyl (Me). In addition to the ¹³C NMR analysis, an electron spin resonance (ESR) analysis was conducted for polymerizations of diisopropyl itaconate, the ESR spectra of which consisted of two kinds of resonances due to the radicals with different conformations. It was assumed that the difference in conformation was attributable to the stereosequences near the propagating chain end because the relative intensity ratios of the resonances varied with the magnitude of the intramolecular chain‐transfer reaction, which was accompanied by a decrease in the syndiotacticity of the obtained poly(diisopropyl itaconate)s. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4513–4522, 2002     

Mechanism of the controlled radical polymerization of styrene and methyl methacrylate in the presence of dicyclopentadienyltitanium dichloride

The mechanism of the controlled radical polymerization of styrene and methyl methacrylate in the presence of dicyclopentadienyltitanium dichloride (Cp₂TiCl₂) was studied using quantum chemical calculations and electron spin resonance spectroscopy. It was established that the reduction of Cp₂TiCl₂ to Cp₂TiCl during the macromolecule synthesis occurs through the living polymerization mechanism, which adjusts the growth of a polymeric chain. The geometrical structures of the molecular complexes between a growing macroradical and Cp₂TiCl₂ and transition states of radical inhibition steps were optimized and the thermodynamic and kinetic parameters of the elementary reactions were estimated for several feasible directions of the process. On this basis, the observed kinetic features of vinylic monomer polymerization with participation of organic compounds of titanium are discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

Modeling molecular weight distribution and effect of termination in controlled radical polymerization: A novel and transformative approach

A theory for polymer molecular weight distribution (MWD) in atom transfer radical polymerization (ATRP) has been derived by using analogy to a series of continuous stirred tank reactors (CSTRs). This approach relates one activation cycle in ATRP to one reactor in CSTRs. The derived MWD expression includes effect of radical termination and allows detailed investigation on the factors that determine the polymer distribution, namely the level of “control” and “livingness.” The level of control means the average number of activation cycles experienced by individual chains. The degree of livingness is quantified by the fraction of terminated chains. It was found that the effect of livingness and control on MWD is complex. Large number of activation cycles does not guarantee a narrow distribution. There exists an optimum value of activation cycles to achieve the lowest polydispersity by balancing the control (achieved by increasing activation cycles) with the loss of livingness (also caused by increasing activation cycles). The distribution for ATRP is in‐between Poisson and Flory distributions, determined by the level of control and livingness. In general, having high degree of livingness and maintaining control are both necessary conditions to obtain narrow MWD. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 639–651     

MALDI‐TOF‐MS analysis of living cationic polymerization of vinyl ethers. III. Polymerization with SnCl4 and TiCl4 in the absence of additives

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis revealed that the precision control (or the living nature) of the cationic polymerization of vinyl ethers with SnCl₄ or TiCl₄ critically depends on the Lewis acid concentration and temperature. Specifically, at an extremely low Lewis acid concentration, for example, the polymerization with the HCl–vinyl ether adduct (an initiator) is living at ?78 °C in CH₂Cl₂ solvent, whereas side reactions occurred at a higher concentration of SnCl₄ or at a higher temperature, ?15 °C. This was more pronounced with SnCl₄ than with TiCl₄, which was due to a stronger Lewis acidity of SnCl₄ as suggested by NMR analysis of the model reactions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1258–1267, 2001     

Continuous precipitation polymerization of acrylic acid in supercritical carbon dioxide: The polymerization rate and the polymer molecular weight

The precipitation polymerization of acrylic acid in supercritical carbon dioxide was studied in a continuous stirred tank reactor with 2,2′‐azobis(2,4‐dimethylvaleronitrile) as the free‐radical initiator. The reactor temperature was between 50 and 90 °C, the pressure was 207 bar, and the average residence time was between 12 and 40 min. The product polymer was a white, dry, fine powder that dissolved in water. A wide range of polymer molecular weights (5–200 kg/mol) was obtained. The effects of the operating variables on the polymerization rate and on the polymer molecular weight were evaluated. The observed kinetics suggested that polymerization took place in both the supercritical fluid and the precipitated polymer particles. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2546–2555, 2005     

Tetraalkylammonium salt as photoinitiator of vinyl polymerization in organic and aqueous media: A mechanistic and laser flash photolysis study

N‐Dimethyl‐N‐[2‐(N,N‐dimethylamino)ethyl]‐N‐(1‐methylnaphthyl)ammonium tetrafluoroborate ( I ) was synthesized with the aim of obtaining a versatile photoinitiator for vinyl polymerization in organic solvents and water. Salt I was able to trigger the polymerization of acrylamide, 2‐hydroxyethylmethacrylate and styrene even at very low concentrations of the salt (～1.0 × 10^?5 M). Using laser flash photolysis and fluorescence techniques and analyzing the photoproduct distribution, we were able to postulate a mechanism for the photodecomposition of the salt. With irradiation, I undergoes an intramolecular electron‐transfer reaction to form a radical ion pair (RIP). The RIP intermediate decomposes into free radicals. The RIP and the free radicals are active species for initiating the polymerization. Depending on the concentration of the vinyl monomers studied, the initiation mechanism of the polymerization reaction changes. At large monomer concentrations, the RIP state is postulated to trigger the reaction by generating the anion radical of the olefin substrate. At a low monomer concentration, the free radicals produced by the decomposition of I are believed to start the chain reaction. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 901–913, 2002; DOI 10.1002/pola.10166     

Iron‐catalyzed radical polymerization of acrylamides in the presence of Lewis acid for simultaneous control of molecular weight and tacticity

This work is directed to the stereospecific living radical polymerization of acrylamides such as N,N‐dimethylacrylamide and N‐isopropylacrylamide with an iron complex and a Lewis acid. DMAM was polymerized with [FeCp(CO)₂]₂ in conjunction with an alkyl iodide [(CH₃)₂C(CO₂Et)I] as an initiator in the presence of Y(OTf)₃ in toluene/methanol (1/1) at 60 °C to be converted almost quantitatively to the polymers with controlled molecular weights and high isotacticity (m > 80%), wherein the Fe‐complex generates radical species from a covalent C? I bond of the dormant species and the Lewis acid controls the stereochemistry of the polymerization via coordination with the amide groups of the polymer terminal and the monomer. A series of Lewis acids were also used for the iron(I)‐catalyzed DMAM polymerization, and Yb(OTf)₃ and Yb(NTf₂)₃ proved effective in giving isotactic polymers without deteriorating the molecular weight control similar to Y(OTf)₃. Furthermore, a slight enhancement of isospecificity was observed for the iron‐catalyzed system in comparison with the α,α‐Azobisisobutyronitrile‐initiated, when coupled with Y(OTf)₃. Stereoblock polymerization of DMAM via a one‐pot reaction was also achieved by just adding the Y(OTf)₃ methanol solution in the course of the polymerization to give atactic‐b‐isotactic poly(DMAM). A similar but slightly lower control in the molecular weight and tacticity was achieved in the polymerization of NIPAM with [FeCp(CO)₂]₂/Y(OTf)₃. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2086–2098, 2006     

Modeling the molecular weight distribution of block copolymer formation in a reversible addition–fragmentation chain transfer mediated living radical polymerization

Block copolymers have become an integral part of the preparation of complex architectures through self‐assembly. The use of reversible addition–fragmentation chain transfer (RAFT) allows blocks ranging from functional to nonfunctional polymers to be made with predictable molecular weight distributions. This article models block formation by varying many of the kinetic parameters. The simulations provide insight into the overall polydispersities (PDIs) that will be obtained when the chain‐transfer constants in the main equilibrium steps are varied from 100 to 0.5. When the first dormant block [polymer–S? C(Z)?S] has a PDI of 1 and the second propagating radical has a low reactivity to the RAFT moiety, the overall PDI will be greater than 1 and dependent on the weight fraction of each block. When the first block has a PDI of 2 and the second propagating radical has a low reactivity to the RAFT moiety, the PDI will decrease to around 1.5 because of random coupling of two broad distributions. It is also shown how we can in principle use only one RAFT agent to obtain block copolymers with any desired molecular weight distribution. We can accomplish this by maintaining the monomer concentration at a constant level in the reactor over the course of the reaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5643–5651, 2005     

Free radical polymerization with catalytic chain transfer: Using NMR to probe the strength of the cobalt–carbon bond in small molecule model reactions

This work examines cobalt–carbon bond formation between the cobalt (II) macrocycle, (tetrakis(p‐methoxyphenyl)porphyrinato)cobalt (II), (TAP)Co, and a variety of radicals derived from vinyl compounds to facilitate a better understanding of the various factors affecting the cobalt–carbon bond strength in catalytic chain transfer polymerization. The reaction of (TAP)Co with the following vinylic molecules was studied: methacrylonitrile, cyclohexene, methyl methacrylate, styrene, methyl acrylate, vinyl acetate, vinyl benzoate, methyl crotonate, cis‐2‐pentenenitrile, and ethyl α‐hydroxymethacrylate. Different concentrations of each vinylic compound were added to (TAP)Co and 2,2′‐azobis(isobutyronitrile) in CDCl₃ at 60 °C. The ratio of Co(III) to Co(II) and the nature of the radical bound to the cobalt macrocycle were determined via nuclear magnetic resonance measurements. Several factors are shown to affect the reaction of the radical and the cobalt (II) species (and hence the strength of the cobalt–carbon bond in the resulting compound). These factors are as follows: the number of pathways by which a radical may be derived from the vinyl compound; the variety of radicals that can be produced from the vinylic molecule; the stability of the radical(s) generated; and the relative propagation rate of the vinyl compound. A discussion on the relevance of this study to the behavior of different monomers in catalytic chain transfer reactions is included. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6171–6189, 2006     

Cooperative interaction of n-butylammonium ion with 1,3-alternate tetrapropoxycalix [4]arene: NMR and theoretical study

The interaction of 1,3-alternate tetrapropoxycalix[4]arene (1) with n-butylammonium ion (2) in CD(2)Cl(2) was examined using (1)H, (13)C and (14)N NMR spectroscopy and DFT (density functional theory) calculations. NMR shows that 1 forms with 2 an equimolecular hydrogen-bonded complex with the equilibrium constant 5.91 x 10(3) l/mol at 296 K. The structure of the complex can be shown to be asymmetric at 203 K, with 2 interacting by hydrogen bonds with the two ethereal oxygen atoms of one half of 1 and with the pi system of the other half, but is rapidly averaged to an apparent C(4h) symmetry by chemical exchange at higher temperatures. Using two related but independent techniques based on transverse and rotating-frame proton relaxation, it is shown that only an intermolecular exchange of 2 between the bound and free states takes place, in contrast to previously studied interaction of 1 with H(3)O(+). Its correlation time is 0.169 ms. It is shown by DFT calculations that such swift exchange is not possible without a cooperative interaction of both 2 and 1 with several molecules of water present. Similarities and contrasts between the exchange processes of 2 and H(3)O(+) bound to 1 are discussed, in particular with respect to the apparent quantum tunneling of the latter inside the molecule of the complex.     

A degradable atom transfer radical polymerization inimer: Synthesis,polymerization, and cleavage of the resulting polymer products

A novel degradable inimer for atom transfer radical polymerization (ATRP), 2‐(6‐(2‐((2‐bromo‐2‐methylpropanoyl)oxy)ethyl)pyridin‐2‐yl)ethyl methacrylate (PyDEBrMΑ), was synthesized by the two‐step esterification of 2,6‐pyridinediethanol, first with α‐bromoisobutyryl bromide in order to introduce the initiator moiety, and then with methacryloyl chloride in order to introduce the monomer moiety. PyDEBrMA was subsequently used to initiate the self‐condensing ATRP of methyl methacrylate (MMA) to obtain a hyperbranched MMA homopolymer which could be cleaved at the PyDEBrMA residue either by treatment under mildly alkaline hydrolysis conditions (sodium deuteroxide in d₆‐DMSO at room temperature) or thermolysis at 150 °C. The lability of the PyDEBrMA residue arises from the presence in its structure of two 2‐(pyridin‐2‐yl)ethyl ester moieties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2831–2839     

A nitrogen-15 NMR study of hydrogen bonding in 1-alkyl-4-imino-1,4-dihydro-3-quinolinecarboxylic acids and related compounds

The title compounds contain groups (amine, amide, imine, carboxylic acid) that are capable of forming intramolecular hydrogen bonds involving a six-membered ring. In compounds where the two interacting functional groups are imine and carboxylic acid, the imine is protonated to give a zwitterion; where the two groups are imine and amide, the amide remains intact and forms a hydrogen bond to the imine nitrogen. The former is confirmed by the iminium 15N signal, which shows the coupling of 1J(15N,1H) -85 to -86.8 Hz and 3J(1H,1H) 3.7-4.2 Hz between the iminium proton and the methine proton of a cyclopropyl substituent on the iminium nitrogen. Hydrogen bonding of the amide is confirmed by its high 1H chemical shift and by coupling of the amide hydrogen to (amide) nitrogen [(1J(15N,1H) -84.7 to -90.7 Hz)] and to ortho carbons of a phenyl substituent. Data obtained from N,N-dimethylanthranilic acid show 15N-1H coupling of (-)8.2 Hz at 223 K (increasing to (-)5.3 Hz at 243 K) consistent with the presence of a N... H-O hydrogen bond.     

SET‐LRP of methyl methacrylate initiated with CCl4 in the presence and absence of air

Single electron transfer‐living radical polymerization (SET‐LRP) represents a robust and versatile method for the rapid synthesis of macromolecules with defined architecture. The synthesis of poly(methyl methacrylate) via SET‐LRP in dimethyl sulfoxide (DMSO) by using CCl₄ as initiator is demonstrated in this work. Resorting to a rather simple Cu(0)/Me₆‐TREN catalyst a method was established that allowed for the straightforward design of well‐defined poly(methyl methacrylate). The reactions were performed at various temperatures (25, 50, 60, and 80 °C) and complete monomer conversion could be achieved. The polymerizations obeyed first order kinetic, the molecular weights increased linearly with conversion and the polymers exhibited narrow molecular weight distributions all indicating the livingness of the process. By providing a small amount of hydrazine to the reaction mixture the polymerization could be conducted in presence of air omitting the need for any elaborated deoxygenation procedures. This methodology offers an elegant way to synthesize functionalized poly(methyl methacrylate) with perfect control over the polymerization process as well as molecular architecture. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2243–2250, 2010     

Raft polymerization of MMA in the presence of ferrocene: A new way to realize the rate enhancement

Ferrocene (Fe(Cp)₂) was added to a thermal initiation of reversible addition‐fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN) as the RAFT agent at 115 °C. It was found that the polymerization was greatly promoted after the addition of Fe(Cp)₂ while retaining the characteristics of a typical RAFT polymerization. It was proposed that the formation of a redox initiation system, in which the poly(methyl methacrylate) peroxide (PMMAP) generated in situ as the oxidizer and Fe(Cp)₂ as the reducer, was possibly the reason for the interesting polymerization phenomenon. Such a redox initiation mechanism was further validated with ascorbic acid (VC) as the reducer instead of Fe(Cp)₂. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3607–3615, 2009