Three‐component One‐pot Synthetic Route to Functionalized N‐Phenyl‐ and N,N‐(1,4‐phenylene)‐2‐alkylimino‐2,3‐dihydrothiazoles under Mild,Solvent‐ and Catalyst‐free Conditions

A simple and efficient one‐pot synthesis of alkyl‐2‐(alkylimino)‐4‐methyl‐3‐phenyl‐2,3‐dihydrothiazole‐5‐carboxylate and dialkyl 3,3′‐(1,4‐phenylene)‐bis‐[2‐(alkylimino)‐4‐methyl‐2,3‐dihydrothiazole‐5‐carboxylate] derivatives from the reaction of phenylisothiocyanate (and also 1,4‐phenylene diisothiocyanate) and primary alkylamines in the presence of 2‐chloro‐1,3‐dicarbonyl compounds is described. This new protocol has several advantages such as lack of necessity of the catalyst and solvent, good yields,mild conditions and short times for reaction.     

Synthesis and comparison of the structure–property relationships of symmetric and asymmetric water‐soluble poly(p‐phenylene)s

Sodium salts of water‐soluble polymers poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(hexyloxy)‐1,4‐phenylene]} ( P1 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dodecyloxy)‐1,4‐phenylene]} ( P2 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dibenzyloxy)‐1,4‐phenylene]} ( P3 ), poly[2‐hexyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P4 ), and poly[2‐dodecyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P5 )] were synthesized with Suzuki coupling reactions and fully characterized. The first group of polymers ( P1 – P3 ) with symmetric structures gave lower absorption maxima [maximum absorption wavelength (λ_max) = 296–305 nm] and emission maxima [maximum emission wavelength (λ_em) = 361–398 nm] than asymmetric polymers P4 (λ_max = 329 nm, λ_em = 399 nm) and P5 (λ_max = 335 nm, λ_em = 401 nm). The aggregation properties of polymers P1 – P5 in different solvent mixtures were investigated, and their influence on the optical properties was examined in detail. Dynamic light scattering studies of the aggregation behavior of polymer P1 in solvents indicated the presence of aggregated species of various sizes ranging from 80 to 800 nm. The presence of alkoxy groups and 3‐sulfonatopropoxy groups on adjacent phenylene rings along the polymer backbone of the first set hindered the optimization of nonpolar interactions. The alkyl chain crystallization on one side of the polymer chain and the polar interactions on the other side allowed the polymers ( P4 and P5 ) to form a lamellar structure in the polymer lattice. Significant quenching of the polymer fluorescence upon the addition of positively charged viologen derivatives or cytochrome‐C was also observed. The quenching effect on the polymer fluorescence confirmed that the newly synthesized polymers could be used in the fabrication of biological and chemical sensors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3763–3777, 2006     

Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

Photocrosslinkable copolyesters: Poly(alkylene terephthalate‐co‐1,4‐phenylene bisacrylate)

1,4‐Phenylene bis(acrylic acid) is a thermally stable diacid, which can be incorporated into polyesters. The phenylene bisacrylate structural units undergo rapid photochemical reaction in the solid state to form crosslinks. This constitutes a feasible approach to polyesters, which can be photochemically thermoset after fabrication as films and fibers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2167–2176, 2000     

Acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzene with molybdenum or ruthenium catalysts: Factors affecting the precise synthesis of defect‐free,high‐molecular‐weight trans‐poly(p‐phenylene vinylene)s

Factors affecting the syntheses of high‐molecular‐weight poly(2,5‐dialkyl‐1,4‐phenylene vinylene) by the acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzenes [alkyl = n‐octyl ( 2 ) and 2‐ethylhexyl ( 3 )] with a molybdenum or ruthenium catalyst were explored. The polymerizations of 2 by Mo(N‐2,6‐Me₂C₆H₃) (CHMe₂ Ph)[OCMe(CF₃)₂]₂ at 25 °C was completed with both a high initial monomer concentration and reduced pressure, affording poly(p‐phenylene vinylene)s with low polydispersity index values (number‐average molecular weight = 3.3–3.65 × 10³ by gel permeation chromatography vs polystyrene standards, weight‐average molecular weight/number‐average molecular weight = 1.1–1.2), but the polymerization of 3 was not completed under the same conditions. The synthesis of structurally regular (all‐trans), defect‐free, high‐molecular‐weight 2‐ethylhexyl substituted poly(p‐phenylene vinylene)s [poly 3 ; degree of monomer repeating unit (DP_n) = ca. 16–70 by ¹H NMR] with unimodal molecular weight distributions (number‐average molecular weight = 8.30–36.3 × 10³ by gel permeation chromatography, weight‐average molecular weight/number‐average molecular weight = 1.6–2.1) and with defined polymer chain ends (as a vinyl group, ? CH?CH₂) was achieved when Ru(CHPh)(Cl)₂(IMesH₂)(PCy₃) or Ru(CH‐2‐OⁱPr‐C₆H₄)(Cl)₂(IMesH₂) [IMesH₂ = 1,3‐bis(2,4,6‐trimethylphenyl)‐2‐imidazolidinylidene] was employed as a catalyst at 50 °C. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6166–6177, 2005     

Study of 1,3‐Dipolar Cycloaddition and Ring Contraction of New 1,4‐Phenylene‐bis[1,5]benzothiazepine Derivatives

Some 1,4‐phenylene‐bis[1,2,4]oxadiazolo‐[5,4‐d][1,5]benzothiazepine derivatives ( 4a , 4b , 4c ) were synthesized by 1,3‐dipolar cycloaddition reaction of benzohydroximinoyl chloride with 1,4‐phenylene‐bis(4‐aryl)‐2,3‐dihydro[1,5]benzothiazepine ( 2a , 2b , 2c ); meanwhile, compounds 2a , 2b , 2c also occurred ring contraction under acylating condition to obtain bis[2‐aryl‐2′‐(β‐1,4‐phenylenevinyl)‐3‐acetyl]‐2,3‐dihydro[1,5]benzothiazoles ( 3a , 3b , 3c ). The structures of some novel compounds were confirmed by IR, ¹H‐NMR, elemental, and X‐ray crystallographic analysis.     

Synthesis and electroluminescent properties of a novel 1,3,4‐oxadiazole‐containing polymer

The new blue light polymer, poly(1′,4′‐phenylene‐1″,4″‐[2″‐(2″″‐ethylhexyloxy)]phenylene‐1‴,4‴‐phenylene‐2,5‐oxadiazolyl) (PPEPPO) was synthesized through the Suzuki reaction of diboronic acid, 2‐methoxy‐[5‐(2′‐ethylhexyl)oxy]‐1,4‐benzene diboronic acid (MEHBBA) and dibromide, 2,5‐bis(4′‐bromophenyl)‐1,3,4‐oxadiazole. This polymer was characterized with various spectroscopic methods. The solid PL spectrum of PPEPPO has a maximum peak at 444 nm corresponding to blue light. Blue LED has been fabricated using this polymer as the electroluminescent layer, ITO as the anode, and aluminum as cathode. This device emitted a blue light, with 40 V of turn‐on voltage. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3086–3091, 2000     

Synthesis and characterization of some new 4,4′‐(1,4‐phenylene)dipyrimidine and 6,6′‐(1,4‐phenylene)‐di(pyridin‐2(1H)‐one) derivatives

A series of new 4,4′‐(1,4‐phenylene)dipyrimidines 5a–c, 8a–c , and 10a,b have been synthesized from the reaction of amidines 1a–c with the dienaminone 2 , bis‐chalcone 6 , or ylidenemalono‐ nitrile 9 . The reaction of malononitrile and ethyl cyanoacetate with 2 gave 6,6′‐(1,4‐phenylene)di(pyridin‐2(1H)‐ones) ( 15a,b ). The structures of the products were proved by elemental analyses, IR, MS, ¹H, and ¹³C NMR spectroscopy. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:507–512, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20150     

High‐Contrast Red–Green–Blue Tricolor Fluorescence Switching in Bicomponent Molecular Film

Highly efficient red–green–blue (RGB) tricolor luminescence switching was demonstrated in a bicomponent solid film consisting of (2Z,2′Z)‐2,2′‐(1,4‐phenylene)bis(3‐(4‐butoxyphenyl)acrylonitrile) (DBDCS) and (2Z,2′Z)‐3,3′‐(2,5‐bis(6‐(9H‐carbazol‐9‐yl)hexyloxy)‐1,4‐phenylene)bis(2‐(3,5‐bis(trifluoromethyl)phenyl)acrylonitrile) (m‐BHCDCS). Reversible RGB luminescence switching with a high ratiometric color contrast (λ_em=594, 527, 458 nm for red, green, and blue, respectively) was realized by different external stimuli such as heat, solvent vapor exposure, and mechanical force. It was shown that Förster resonance energy transfer in the bicomponent mixture could be efficiently switched on and off through supramolecular control.     

Syntheses and electroluminescence properties of conjugated poly(p‐phenylene vinylene) derivatives bearing dendritic pendants

A series of new poly(p‐phenylene vinylene) derivatives with different dendritic pendants—poly{2‐[3′,5′‐bis(2″‐ethylhexyloxy)benzyloxy]‐1,4‐phenylenevinylene} (BE–PPV), poly{2‐[3′,5′‐bis(3″,7″‐dimethyl)octyloxy]‐1,4‐phenylenevinylene} (BD–PPV), poly(2‐{3′,5′‐bis[3″,5″‐bis(2?‐ethylhexyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene) (BBE–PPV), poly(2‐{3′,5′‐bis[3″,5″‐bis(3?,7?‐dimethyloctyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene) (BBD–PPV), and poly[(2‐{3′,5′‐bis[3″,5″‐bis(2?‐ethylhexyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene)‐co‐(2‐{3′,5′‐bis[3″,5″‐bis(3?,7?‐dimethyloctyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene)] (BBE‐co‐BBD–PPV; 1:1)—were successfully synthesized according to the Gilch route. The structures and properties of the monomers and the resulting conjugated polymers were characterized with ¹H and ¹³C NMR, elemental analysis, gel permeation chromatography, thermogravimetric analysis, ultraviolet–visible absorption spectroscopy, photoluminescence, and electroluminescence spectroscopy. The obtained polymers possessed excellent solubility in common solvents and good thermal stability, with a 5% weight loss temperature of more than 328 °C. The weight‐average molecular weights and polydispersity indices of BE–PPV, BD–PPV, BBE–PPV, BBD–PPV, and BBE‐co‐BBD–PPV (1:1) were in the range of 1.33–2.28 × 10⁵ and 1.35–1.53, respectively. Double‐layer light‐emitting diodes (LEDs) with the configuration of indium tin oxide/polymer/tris(8‐hydroxyquinoline) aluminum/Mg:Ag/Ag devices were fabricated, and they emitted green‐yellow light. The turn‐on voltages of BE–PPV, BD–PPV, BBE–PPV, BBD–PPV, and BBE‐co‐BBD–PPV (1:1) were approximately 5.6, 5.9, 5.5, 5.2, and 4.8 V, respectively. The LED devices of BE–PPV and BD–PPV possessed the highest electroluminescent performance; they exhibited maximum luminance with about 860 cd/m² at 12.8 V and 651 cd/m² at 13 V, respectively. The maximum luminescence efficiency of BE–PPV and BD–PPV was in the range of 0.37–0.40 cd/A. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3126–3140, 2005     

Synthesis of new 3,3′‐(1,4‐phenylene)bis(1,5‐diones) derivatives

Several 3,3′‐(1,4‐phenylene)bis(1,5‐diones) and their chalcone precursors have been prepared in good to excellent yield via aldol addition and Michael addition starting from 3‐acetyl‐2,5‐dimethylfuran or 3‐acetyl‐2,5‐dimethyl‐thiophene with terephthalaldehyde in the presence of appropriate base NaOH or lithium diisopropylamide. The kind and amount of alkali played a critical role in improving the reaction rates and yields of the products. J. Heterocyclic Chem., (2011).     

Synthesis of Phenylene‐Silylene‐Vinylene Polymer and Copolymer by Ruthenium‐Catalyzed Silylative Cross‐Coupling Reaction

RuH(OAc)(CO)(PPh₃)₂ catalyzed silylative cross‐coupling polycondensation of 4‐(dimethylvinylsilyl)styrene ( 2 ) and copolycondensation of 1,4‐divinylbenzene ( 4 ) with 1,4‐bis(dimethylvinylsilyl)benzene ( 5 ) appeared to be a novel synthetic route for highly stereo‐ and regioselective synthesis of phenylene(arylene)‐silylene‐vinylene polymers.     

Enaminones in Heterocyclic Syntheses: Part 4. A New One‐Step Synthetic Route to Pyrrolo[3,4‐b]pyridine and Convenient Syntheses of 1,4‐Dihydropyridines and 1,1′‐(1,4‐Phenylene)bis(1,4‐dihydropyridine)

Reactions of cyano olefins with (i) enamino imides afforded novel pyrrolo[3,4‐b]pyridines; (ii) enamino esters afforded new 1,4‐dihydropyridines; and (iii) bisenamino ester afforded new 1,1′‐(1,4‐phenylene)bis(1,4‐dihydropyridine). The new derivatives are planned as suggested drug candidates.     

Conjugated polymers for the fluorescent detection of nitroaromatics: Influence of side‐chain sterics and π‐system electronics

A series of eight poly(p‐phenylene vinylene) (PPV) and poly(p‐phenylene ethynylene) (PPE) ( P1–P8 ) derivatives were tested for their ability to detect the nitroaromatic explosive 2,4,6‐trinitrotoluene (TNT) and its model compound 2,6‐dinitrotoluene (DNT). The polymers P1–P8 represent five structural classes that have not been examined for nitroaromatic sensing. These new motifs include PPE derivatives with a main‐chain m‐terphenyl unit ( P1 ) or oxacyclophane canopy‐like structure ( P2 ) and PPV derivatives with 2,6‐mesitylenephenylene repeats ( P3 and P4 ), 9,9‐dialkyl‐1,4‐fluorenylene repeats ( P5 and P6 ), or m‐phenylene units that periodically disrupt π‐conjugation along the backbone of the polymer ( P7 and P8 ). The time‐dependent photoluminescent response of films to TNT and DNT and the solution‐phase Stern‐Volmer quenching constants for both TNT and DNT were determined. The results are rationalized in terms of side‐chain sterics and π‐system electronics and are discussed relative to known conjugated polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1487–1492     

Stereochemical aspects of the hypophosphorous acid addition to terephthalic schiff bases. Synthesis of new 1,4‐phenylene‐bis‐aminomethane‐bis‐phosphonous acids

Terephthalic Schiff bases react with hypophosphorous acid to form 1,4‐phenylene‐bis‐N‐alkyl‐aminomethanephosphonous acids in moderate yields. NMR studies demonstrated that—for several examples—this reaction led to the exclusive formation of only one diastereomeric form. NMR investigation of a chiral salt identified the meso form. In contrast hereto, a corresponding addition of hypophosphorous acid to a chiral Schiff base proved to be not stereoselective; all three possible diastereoisomers were formed in a 4:1:1 ratio. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:283–287, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20422     

Addition of di‐(trimethylsilyl)phosphite to N,N′‐dialkyl terephthalic schiff bases: Synthesis of 1,4‐phenylene‐bis‐ (aminomethyl)‐phosphonic acids

The addition of di‐(trimethylsilyl)phosphite to N,N′‐terephthalylidene‐alkyl‐(or aryl‐)amines resulted in 1,4‐phenylene‐bis‐(N‐alkylamino‐ methyl)‐phosphonic acids in moderate yields. The stereochemical behavior of such reactions was studied, and NMR studies demonstrated that, for several examples, this reaction led to the exclusive formation of only one diastereomeric form. The investigation of the chiral salt of the acid identified the pair of enantiomers. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 20:431–435, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20569     

Synthesis of conjugated polymers containing anthracene moiety and their electro‐optical properties

Both fully conjugated polymer poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylene vinylene‐alt‐9,10‐anthrylene vinylene] [poly(MEHPV‐AV)] and conjugated/nonconjugated block copolymers poly(alkanedioxy‐2‐methoxy‐1,4‐phenylene‐1,2‐ethenylene‐9,10‐anthrylene‐1,2‐ehthenylene‐3‐methoxy‐1,4‐phenylene)[poly(BFMPx‐AV), (x = 4, 8, and 12)] were synthesized by Horner–Emmons reaction utilizing potassium tert‐butoxide. Of these synthesized polymers poly(BFMP4‐AV) and poly(BFMP8‐AV), which has four and six methylene groups as solubility spacer in the main chain exhibited liquid crystalline to isotropic transition in addition to the two first order transitions. Light‐emitting diode (LED)s made from the organic solvent soluble poly(BFMP12‐AV) as emitting layer showed blue shift in the emission spectrum compared to the one made from fully conjugated poly(MEHPV‐AV). Although poly(BFMP12‐AV) had higher barrier to the electron injection from cathode than poly(MEHPV‐AV), the luminance efficiency of LED made from poly(BFMP12‐AV) was about 25 times higher than the one made from poly(MEHPV‐AV), which had fully conjugated structure. LEDs fabricated by both poly(BFMP12‐AV) and poly(MEHPV‐AV) exhibited Stoke's shift in the range of 155 to 168 nm from the absorption maximum due to the excimer formation between the ground and excited state anthracene groups. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3173–3180, 2000     

Efficient Preparation of 2, 2′‐Disubstituted‐3, 3′‐(1, 4‐phenylene)bis‐thienopyrimidin‐4‐ones Based on an aza‐Wittig Reaction

Tandem aza‐Wittig reaction of iminophosphorane with 1, 4‐phenylene diisocyanate followed by intramolecular heteroconjugate addition annulation after addition of a nucleophilic reagent (amine, phenol, and alcohol), in the presence of catalytic K₂CO₃ or NaOR, gives selectively the functionalized substituted 2, 2′‐di(alkylamino, aryloxy)‐3, 3′‐(1, 4‐phenylene)bis(thieno[3, 2‐d]pyrimidin‐4(3H)‐ones) and 2, 2′‐di(alkylamino or alkoxy)‐3, 3′‐(1, 4‐phenylene)bis(3, 5, 6, 7‐tetrahydro‐4H‐cyclopenta[4, 5]thieno[2, 3‐d]pyrimidin‐4‐ones).     

Syntheses,Structure, Electrochemistry,and Optical Properties of 1,3‐Diethyl‐2,3‐dihydro‐1‐H‐1,3,2‐pyrido‐[4,5‐b]‐diazaboroles

Reaction of 2,5‐bis(dibromoboryl)thiophene ( 4 ) or 1,4‐bis(dibromoboryl)benzene ( 6 ) with two equivalents of N,N′‐dilithiated 2,3‐diaminopyridine ( 3 ) led to the generation of the pyridodiazaboroles 5 and 7 in which the two diazaborole rings are linked by 2,5‐thiophen‐diyl or 1,4‐phenylene units via the boron atom. The novel compounds were characterized by elemental analyses and spectroscopy (¹H‐, ¹¹B‐, ¹³C‐NMR, MS, and UV‐VIS). The molecular structure of 5 was elucidated by X‐ray diffraction. Cyclovoltammograms of 5 and 7 show two irreversible oxidation waves at 0.76 and 0.73 V, respectively vs Fc/Fc⁺. The novel compounds display intense blue luminescence with Stokes shifts of 76 and 74 nm and relative quantum yields of 39 and 43 % vs Coumarin 120 (Φ = 50 %).     

Synthesis of Some Novel 1,4‐Phenylene‐bis‐thiazolyl Derivatives and Their Anti‐hypertensive α‐blocking Activity Screening

A series of novel 1,4‐phenylene‐bis‐thiazolyl derivatives were synthesized and evaluated for their anti‐hypertensive activities as α‐blocking agents and some of them showed promising activities.