Kinetic study of the Ce(III)‐, Mn(II)‐ or Fe(phen)32+‐catalyzed Belousov‐Zhabotinsky reaction with 2‐ketoglutaric acid

The Belousov‐Zhabotinsky (BZ) reaction of bromate ion with 2‐ketoglutaric acid (KGA) in aqueous sulfuric acid catalyzed by Ce(III), Mn(II), or Fe(phen)₃²⁺ ion exhibits sustained barely damped oscillations under aerobic conditions. In general, the reaction oscillates without an induction period. Fe(phen)₃²⁺ ion behaves differently from Ce(III) and Mn(II) ions in catalyzing this oscillating system. The gem‐diol form of KGA exhibits different behavior from that of the keto form of KGA in the BZ reaction. The kinetics and mechanism of the reaction of KGA with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion was investigated. The order of relative reactivities of metal ions toward reaction with KGA is Mn(III) > Ce(IV) ≫ Fe(phen)₃³⁺. Experimental results are rationalized. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 101–107, 2001     

Kinetic study of the Ce(III)‐, Mn(II)‐ or Fe(phen)32+‐catalyzed Belousov–Zhabotinsky reaction with ethyl hydrogen malonate

In a stirred batch reaction, Fe(phen)₃²⁺ ion behaves differently from Ce(III) or Mn(II) ion in catalyzing the bromate‐driven oscillating reaction with ethyl hydrogen malonate [CH₂COOHCOOEt, ethyl hydrogen malonate (EHM)]. The effects of N₂ atmosphere, concentrations of bromate ion, EHM, metal ion catalyst, sulfuric acid, and additive (bromide ion or bromomalonic acid) on the pattern of oscillations were investigated. The kinetic study of the reaction of EHM with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion indicates that under aerobic or anaerobic conditions the order of reactivity toward reacting with EHM is Mn(III) > Ce(IV) ≫ Fe(phen)₃³⁺, which follows the same trend as that of the malonic acid system. The presence of the ester group in EHM lowers the reactivity of the two methylene hydrogen atoms toward bromination or oxidation by Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion. No good oscillations were observed for the BrO₃₋‐CH₂(COOEt)₂ reaction catalyzed by Ce(III), Mn(II), or Fe(phen)₃²⁺ ion. A discussion of the effects of oxygen on the reactions of malonic acid and its derivatives (RCHCOOHCOOR′) with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion is also presented. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 52–61, 2000     

Kinetic Study of the Ce(III)‐, Mn(II)‐, or Ferroin‐Catalyzed Belousov‐Zhabotinsky Reaction with Allylmalonic Acid

In a stirred batch experiment and under aerobic conditions, ferroin (Fe(phen)₃²⁺) behaves differently from Ce(III) or Mn(II) ion as a catalyst for the Belousov‐Zhabotinsky (BZ) reaction with allylmalonic acid (AMA). The effects of bromate ion, AMA, metal‐ion catalyst, and sulfuric acid on the oscillating pattern were investigated. The kinetics of the reaction of AMA with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion was studied under aerobic or anaerobic conditions. The order of reactivity of metal ions toward reaction with AMA is Fe(phen)₃³⁺ > Mn(III) > Ce(IV) under aerobic conditions whereas it is Mn(III) > Ce(IV) > Fe(phen)₃³⁺ under anaerobic conditions. Under aerobic or anaerobic conditions, the order of reactivity of RCH(CO₂H)₂ (R = H (MA), Me (MeMA), Et (EtMA), allyl (AMA), n‐Bu (BuMA), Ph (PhMA), and Br (BrMA)) is PhMA > MA > BrMA > AMA > MeMA > EtMA > BuMA toward reaction with Ce(IV) ion and it is MA > PhMA > BrMA > MeMA > AMA > EtMA > BuMA toward reaction with Mn(III) ion. Under aerobic conditions, the order of reactivity of RCH(CO₂H)₂ toward reaction with Fe(phen)₃³⁺ ion is PhMA > BrMA > (MeMA, AMA) > (BuMA, EtMA) > MA. The experiment results are rationalized.     

Kinetic study of the Ce(iii)- or Mn(ii)-catalyzed Belousov–Zhabotinsky reactions with mixed organic acid/ketone substrates

In a stirred batch reactor, the Ce(III)- or Mn(II)-catalyzed Belousov–Zhabotinsky reaction with mixed organic acid/ketone substrates exhibits oscillatory behavior. The organic acids studied here are: dl-mandelic acid (MDA), dl-4-bromomandelic acid (BMDA), and dl-4-hydroxymandelic acid (HMDA), and the ketones are: acetone (Me₂CO), methyl ethyl ketone (MeCOEt), diethyl ketone (Et₂CO), acetophenone (MeCOPh), and cyclohexanone ((CH₂)₅CO). The effects of bromate ion, organic acid, ketone, metal-ion catalyst, and sulfuric acid concentrations on the oscillatory patterns are investigated. Both conventional and stopped-flow methods are applied to study the kinetics of the oxidation reactions of the above organic acids by Ce(IV) or Mn(III) ion. The order of relative reactivities of the oxidation reactions of organic acids in 1 M H₂SO₄ is Mn(III)(SINGLEBOND)HMDA reaction>Ce(IV)(SINGLEBOND)HMDA reaction>Mn(III)(SINGLEBOND)BMDA, reaction>Mn(III)(SINGLEBOND)MDA reaction>Ce(IV)(SINGLEBOND)BMDA reaction>Ce(IV)(SINGLEBOND)MDA reaction. Spectrophotometric study of the bromination reactions of the above ketones shows that these reactions are zero-order with respect to bromine and first-order with respect to ketone and that ketone enolization is the rate-determining step. The order of relative rates of bromination or enolization reactions of ketones in 1 M H₂SO₄ is (CH₂)₅CO≫(MeCOEt, Et₂CO, Me₂CO)>MeCOPh. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet:30: 595–604, 1998     

Kinetic study of the Ce(III)- or ferroin-catalyzed Belousov-Zhabotinsky reaction with ethyl- or butyl-malonic acid

In a stirred batch experiment, ferroin (Fe(phen)₃²⁺) behaves differently from Ce(III) as a catalyst for the Belousov-Zhabotinsky reaction with ethyl- or n-butyl-malonic acid (EtMA or BuMA) The effects of bromate ion, organic substrate, metal-ion catalyst, and sulfuric acid on the oscillating pattern were investigated. The kinetics of the reactions of methylmalonic acid (MeMA), bromomethyl-malonic acid (BrMeMA), EtMA, bromoethylmalonic acid (BrEtMA), BuMA, bromo(n-butyl)malonic acid (BrBuMA) with Ce(IV) or Fe(phen)₃³⁺ ion were studied. Under aerobic or anaerobic conditions, the order of reactivity toward Ce(IV) oxidation is MeMA > EtMA > BuMA > BrMeMA >> (BrEtMA, BrBuMA). Under aerobic conditions, the order of reactivity toward reacting with Fe(phen)₃³⁺ ion is MeMA > (BuMA, EtMA) >> (BrMeMA, BrEtMA, BrBuMA). The experimental results are rationalized. © 1996 John Wiley & Sons, Inc.     

Kinetic study of ruthenium(VI)‐catalyzed oxidation of 2‐butanol by alkaline hexacyanoferrate(III)

The oxidation kinetics of 2‐butanol by alkaline hexacyanoferrate(III) catalyzed by sodium ruthenate has been studied spectrophotometrically. The initial rates method was used for kinetic analysis. The reaction rate shows a fractional‐order in [hexacyanoferrate(III)] and [substrate] and a first‐order dependence on [Ru(VI)]. The dependence on [OH⁻] is rather more complicated. The kinetic data suggest a reaction mechanism involving two active catalytic species. Each one of these species forms an intermediate complex with the substrate. The attack of these complexes by hexacyanoferrate(III), in a slow step, produces ruthenium(V) complexes which are oxidized in subsequent steps to regenerate the catalyst species. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 1–9, 1999     

Mechanistic details of the Belousov–Zhabotinsky oscillations. II. The organic reaction subset

Our previous mechanistic model for the Belousov–Zhabotinsky reaction has been revised to include a more realistic set of reactions for the oxidation pathways of the organic intermediates. A few other rate constants have also been modified to include new information. The revised mechanism reproduces the essential experimental observations, although the periods of oscillation are somewhat too long and oscillations cease at malonic acid concentrations about ten times greater than the observed lower limit. However, the essential features of the mechanism are clearly understood.     

Salen-Mn（Ⅲ）-Complex-Catalyzed Oxidations of Secondary Alcohols

Secondary alcohols were catalytically oxidized with diace-toxyiodobenzene as oxidant in the presence of salen-Mn(Ⅲ)complex to aiTord the eorrespoltding ketones, in up to 99% yield, using CH2Cl2 or water as reaction media.     

Monomere und polymere Dimethylaminothioquadratato‐Komplexe: Die Kristallstrukturen von Nickel(II)‐, Cobalt(II)‐, Silber(I)‐, Platin(II)‐, Gold(I)‐, Quecksilber(II)‐ und Blei(II)‐Dimethylaminothioquadrataten

Monomeric and Polymeric Dimethylaminothiosquarato Complexes: The Crystal Structures of Nickel(II), Cobalt(II), Silver(I), Platinum(II), Gold(I), Mercury(II) and Lead(II) Dimethylaminothiosquarates The ligand 2‐dimethylamino‐3, 4‐dioxo‐cyclobut‐1‐en‐thiolate, Me₂N‐C₄O₂S⁻ (L) forms neutral and anionic complexes with nickel(II), cobalt(II)‐, silver(I)‐, platinum(II)‐, gold(I)‐, mercury(II)‐ and lead(II). According to the crystal structures of seven complexes the ligand is O, S‐chelating in [Ni(L)₂(H₂O)₂]·2 H₂O, [Co(L)₂(CH₃OH)₂] and (with limitations) in [Pb(L)₂·DMF]. In the remaining compounds the ligand behaves essentially as a thiolate ligand. The platinum, gold and mercury complexes [TMA]₂[Pt(L)₄], [TMA] [Au(L)₂] and [Hg(L)₂] are monomeric. In [TMA][Ag₂(L)₃]·5.5 H₂O a chain‐like structure was found. In the asymmetric unit of this structure eight silver ions, with mutual distances in the range 2.8949(4) to 3.1660(3)Å, are coordinated by twelve thiosquarato ligands. [Pb(L)₂·DMF] has also a polymeric structure. It contains a core of edge‐bridged, irregular PbS₄ polyhedra. TMA[Au(H₂NC₄O₂S)₂] has also been prepared and its structure elucidated.     

Bi(III)‐catalyzed C―S cross‐coupling reaction

A direct synthetic route for the C―S coupling of aryl halides with thiophenols is described. This method is tolerant to electron‐withdrawing and electron‐donating functional groups and also to the presence of functional groups in the ortho position of the aryl iodide or thiophenol. Aryl iodides are coupled with thiophenols without affecting the other functionalities present in the aryl ring. These reactions follow second‐order kinetics. Copyright © 2012 John Wiley & Sons, Ltd.     

Kinetic study of the ruthenium(VI)‐catalyzed oxidation of benzyl alcohol by alkaline hexacyanoferrate(III)

The kinetics of the Ru(VI)‐catalyzed oxidation of benzyl alcohol by hexacyanoferrate(III), in an alkaline medium, has been studied using a spectrophotometric technique. The initial rates method was used for the kinetic analysis. The reaction is first order in [Ru(VI)], while the order changes from one to zero for both hexacyanoferrate(III) and benzyl alcohol upon increasing their concentrations. The rate data suggest a reaction mechanism based on a catalytic cycle in which ruthenate oxidizes the substrate through formation of an intermediate complex. This complex decomposes in a reversible step to produce ruthenium(IV), which is reoxidized by hexacyanoferrate(III) in a slow step. The theoretical rate law obtained is in complete agreement with all the experimental observations. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 421–429, 2002     

Heterodinukleare Cobalt(II)‐, Nickel(II)‐, Kupfer(II)‐, Zink(II)und Palladium(II)‐Komplexe mit einem makrocyclischen Liganden vom Schiff‐Basen‐Typ: Synthesen und Strukturen

Complexes with Macrocyclic Ligands. IV. Heterodinuclear Cobalt(II), Nickel(II), Copper(II), Zinc(II) and Palladium(II) Complexes with a Macrocyclic Ligand of Schiff‐Base Type: Syntheses and Structures The synthesis and properties of nickel(II), copper(II), and palladium(II) complexes, [ML^Ph] ( 3 ; L^Ph = N,N′‐phenylene‐bis(3‐formyl‐5‐tert.‐butyl‐salicylaldimine)), are described. These neutral mononuclear complexes react with metal(II) perchlorate and 1,3‐propylenediamine to form heterodinuclear, macrocyclic, cationic complexes of the type [MM′(L^Ph,3)]²⁺ ( 4 ; M = Ni, Cu, Pd; M′ = Co, Cu, Zn). The structures of the five new compounds [NiCo(L^Ph,3)](ClO₄)₂, [NiCu(L^Ph,3)](ClO₄)₂, [CuCu(L^Ph,3)](ClO₄)₂, [CuZn(L^Ph,3)](ClO₄)₂, and [PdCu(L^Ph,3)](ClO₄)₂ were determined by X‐ray diffraction.     

Mechanistic details of the Belousov–Zhabotinsky oscillations. III. The induction period

The oscillating Belousov–Zhabotinsky reaction exhibits an initial quiescent induction period during which the concentrations of various reactants and intermediates adjust to a quasisteady-state, which eventually switches into oscillation. The duration of this induction period is strongly dependent on the initial bromide ion concentration. The previously reported detailed mechanism for this system is used to calculate this dependence, and the results are shown to agree with recent experimental work. The factors that account for this behavior are discussed.     

Uncatalyzed and ruthenium(III)‐catalyzed reaction of acidic chlorite with methylene violet

The kinetics and mechanism of the uncatalyzed and Ru(III)‐catalyzed oxidation of methylene violet (3‐amino‐7‐diethylamino‐5‐phenyl phenazinium chloride) (MV⁺) by acidic chlorite is reported. With excess concentrations of other reactants, both uncatalyzed and catalyzed reactions had pseudo‐first‐order kinetics with respect to MV⁺. The uncatalyzed reaction had first‐order dependence on chlorite and H⁺ concentrations, but the catalyzed reaction had first‐order dependence on both chlorite and catalyst, and a fractional order with respect to [H⁺]. The rate coefficient of the uncatalyzed reaction is (5.72 ± 0.19) M^?2 s^?1, while the catalytic constant for the catalyzed reaction is (22.4 ± 0.3) × 10³ M^?1 s^?1. The basic stoichiometric equation is as follows: 2MV⁺ + 7ClO₂^? + 2H⁺ = 2P + CH₃COOH + 4ClO₂ + 3Cl^?, where P⁺ = 3‐amino‐7‐ethylamino‐5‐phenyl phenazinium‐10‐N‐oxide. Stoichiometry is dependent on the initial concentration of chlorite present. Consistent with the experimental results, pertinent mechanisms are proposed. The proposed 15‐step mechanism is simulated using literature; experimental and estimated rate coefficients and the simulated plots agreed well with the experimental curves. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 294–303, 2003     

Form III of 2,2′,4,4′,6,6′‐hexanitro­azobenzene (HNAB‐III)

The crystal structure of form III of the title compound, HNAB [systematic name: bis(2,4,6‐trinitro­phenyl)diazene], C₁₂H₄N₈O₁₂, has finally been solved as a pseudo‐merohedral twin (monoclinic space group P2₁, rather than the ortho­rhombic space group C222₁ suggested by diffraction symmetry) using a dual space recycling method. The significant differences in the room‐temperature densities of the three crystalline forms allow examination of molecular differences due to packing arrangements. An interesting relationship with the stilbene analog, HNS, is discussed. Interatomic separations are compared with other explosives and/or nitro‐containing compounds.     

Zweikernige Palladium(II)‐, Platin(II)‐ und Iridium(III)‐Komplexe von Bis[imidazol‐4‐yl]alkanen

Dinuclear Palladium(II), Platinum(II), and Iridium(III) Complexes of Bis[imidazol‐4‐yl]alkanes The reaction of bis(1,1′‐triphenylmethyl‐imidazol‐4‐yl) alkanes ((CH₂)_n bridged imidazoles L(CH₂)_nL, n = 3–6) with chloro bridged complexes [R₃P(Cl)M(μ‐Cl)M(Cl)PR₃] (M = Pd, Pt; R = Et, Pr, Bu) affords the dinuclear compounds [Cl₂(R₃P)M–L(CH₂)_nL–M(PR₃)Cl₂] 1 – 17 . The structures of [Cl₂(Et₃P)Pd–L(CH₂)₃L–Pd(PEt₃)Cl₂] ( 1 ), [Cl₂(Bu₃P)Pd–L(CH₂)₄L–Pd(PBu₃)Cl₂] ( 10 ), [Cl₂(Et₃P)Pd–L(CH₂)₅L–Pd(PEt₃)Cl₂] ( 3 ), [Cl₂(Et₃P)Pt–L(CH₂)₃L–Pt(PEt₃)Cl₂] ( 13 ) with trans Cl–M–Cl groups were determined by X‐ray diffraction. Similarly the complexes [Cl₂(Cp*)Ir–L(CH₂)_nL–Ir(Cp*)Cl₂] (n = 4–6) are obtained from [Cp*(Cl)Ir(μ‐Cl)₂Ir(Cl)Cp*] and the methylene bridged bis(imidazoles).     

A study on the hydrolysis of bis(nitrophenyl)phosphate catalyzed by N‐methyldiethanolamine‐Ce(III) complex

The hydrolysis of bis(p‐nitrophenyl)phosphate (BNPP) catalyzed by N‐methyldiethanolamine‐Ce(III) complex in the presence and absence of cetyltrimethylammonium bromide (CTAB) and Brij35 surfactants at pH 7.20 and 303 K has been studied. The experimental results indicate that N‐methyldiethanolamine‐Ce(III) complex remarkably accelerates the hydrolysis of BNPP. The observed first‐order rate constant of the hydrolysis of BNPP catalyzed by N‐methyldiethanolamine‐Ce(III) complex at pH 7.20 and 303 K is 1.22 × 10^?2 s^?1, which is 1.09 × 10⁹ times of that of spontaneous hydrolysis of BNPP at pH 7. It is close to the activity of natural enzyme. A general quantitative treatment of the catalytic reaction involved a ternary complex as M_mL_lS has also been proposed in this paper. Applying this method to the catalytic hydrolysis of BNPP, we have obtained its thermodynamic and kinetic parameters. CTAB and Brij35 surfactant micelles obviously influence the rate constants of the catalytic hydrolysis of BNPP. Brij35 micelles promote the catalytic hydrolysis of BNPP, while CTAB micelles inhibit it. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 687–692, 2004     

Kinetic study of the isotope exchange reactions of malonic acid and its derivatives in various acidic D2O media using 1H NMR spectroscopy. Implication in the Belousov‐Zhabotinsky reaction

The kinetics of the isotope exchange reactions of RCH(COOH)₂ (RH, D, Me, Et, Bu, and Ph) in D₂O solution were studied by using ¹H NMR spectroscopy. It was observed that the rate of isotope exchange reaction was inhibited by the presence of 1 M of DNO₃, DCl, DBr or D₂SO₄ and catalyzed by the presence of 4 M of D₂SO₄. No inhibition effect was observed in the case of D₃PO₄. The effect of inorganic acids follows the order of D₃PO₄>D₂SO₄ ≫ (DNO₃, DCl, DBr). The conjugated base (RCH(COOD)(COO⁻)) of RCH(COOD)₂ plays an important role in the isotope exchange reaction. The presence of deuterium ion suppresses the generation of RCH(COOD)(COO⁻) ion from RCH(COOD)₂ and inhibits the rate of isotope exchange. In general, the order of reactivity of RCH(COOH)₂ toward isotope exchange with deuterium atom is RPh>(H, Br)>Me>(Et, Bu). © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 455–461, 1999     

Kinetic study of copper(I)‐catalyzed click chemistry step‐growth polymerization

Oligomers and polymers containing triazole units were synthesized by the copper(I)‐catalyzed 1,3‐dipolar cycloaddition step‐growth polymerization of four difunctional azides and alkynes. In a first part, monofunctional benzyl azide was used as a chain terminator for the polyaddition of 1,6‐diazidohexane and α,ω‐bis(O‐propargyl)diethylene glycol, leading to polytriazole oligomers of controlled average degree of polymerization (DP_n = 3–20), to perform kinetic studies on low‐viscosity compounds. The monitoring of the step‐growth click polymerization by ¹H NMR at 25, 45, and 60 °C allowed the determination of the activation energy of this click chemistry promoted polyaddition process, that is, E_a = 45 ± 5 kJ/mol. The influence of the catalyst content (0.1–5 mol % of Cu(PPh₃)₃Br according to azide or alkyne functionalities) was also examined for polymerization kinetics performed at 60 °C. In a second part, four high molar mass polytriazoles were synthesized from stoichiometric combinations of diazide and dialkyne monomers above with p‐xylylene diazide and α,ω‐bis(O‐propargyl)bisphenol A. The resulting polymers were characterized by DSC, TGA, SEC, and ¹H NMR. Solubility and thermal properties of the resulting polytriazoles were discussed based on the monomers chemical structure and thermal analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5506–5517, 2008     

Kinetics of manganese(III) acetate in acetic acid: generation of Mn(III) with Co(III), Ce(IV), and dibromide radicals; reactions of Mn(III) with Mn(II), Co(II), hydrogen bromide,and alkali bromides

The reaction of cobalt(III) acetate with excess manganese(II) acetate in acetic acid occurs in two stages, since the two forms Co(IIIc) and Co(IIIs) are not rapidly equilibrated and thus react independently. The rate constants at 24.5 degrees C are kc = 37.1 +/- 0.6 L mol-1 s-1 and ks = 6.8 +/- 0.2 L mol-1 s-1 at 24.5 degrees C in glacial acetic acid. The Mn(III) produced forms a dinuclear complex with the excess of Mn(II). This was studied independently and is characterized by the rate constant (3.43 +/- 0.01) x 10(2) L mol-1 s-1 at 24.5 degrees C. A similar interaction between Mn(III) and Co(II) is substantially slower, with k = (3.73 +/- 0.05) x 10(-1) L mol-1 s-1 at 24.5 degrees C. Mn(II) is also oxidized by Ce(IV), according to the rate law -d[Ce(IV)]/dt = k[Mn(II)]2[Ce(IV)], where k = (6.0 +/- 0.2) x 10(4) L2 mol-2 s-1. The reaction between Mn(II) and HBr2., believed to be involved in the mechanism by which Mn(III) oxidizes HBr, was studied by laser photolysis; the rate constant is (1.48 +/- 0.04) x 10(8) L mol-1 s-1 at approximately 23 degrees C in HOAc. Oxidation of Co(II) by HBr2. has the rate constant (3.0 +/- 0.1) x 10(7) L mol-1 s-1. The oxidation of HBr by Mn(III) is second order with respect to [HBr]; k = (4.10 +/- 0.08) x 10(5) L2 mol-2 s-1 at 4.5 degrees C in 10% aqueous HOAc. Similar reactions with alkali metal bromides were studied; their rate constants are 17-23 times smaller. This noncomplementary reaction is believed to follow that rate law so that HBr2. and not Br. (higher in Gibbs energy by 0.3 V) can serve as the intermediate. The analysis of the reaction steps then requires that the oxidation of HBr2. to Br2 by Mn(III) be diffusion controlled, which is consistent with the driving force and seemingly minor reorganization.