Stannous(II) trifluoromethane sulfonate: a versatile catalyst for the controlled ring‐opening polymerization of lactides: Formation of stereoregular surfaces from polylactide “brushes”

A general method for the controlled synthesis of polylactide in solution and from solid supports is presented. The evaluation of stannous(II) trifluoromethane sulfonate [Sn(OTf)₂] and scandium(III) trifluoromethane sulfonate [Sc(OTf)₃] as catalysts for the ring‐opening polymerization (ROP) of L ‐, D ‐, and L ,D ‐lactide is described as a route to polylactide using mild and highly selective conditions. These triflate catalysts must be used in conjunction with a nucleophilic compound such as an alcohol that is the actual initiating species via the active metal alkoxide species. Consistent with this process, ¹H NMR analysis revealed that the α‐chain‐end bears the ester from the initiating alcohol, and upon hydrolysis of the active metal alkoxide chain end, a ω‐hydroxyl chain end was clearly detected. Polymers of predictable molecular weights and narrow polydispersities were obtained in high yields in accordance with a controlled polymerization process. The addition of base either as a solvent or additive significantly enhanced the polymerization rate with minimal loss to the polymerization control. The ROP of lactide isomers from an initiator, HO(CH₂CH₂O)₃(CH₂)₁₁SH, self‐assembled onto a gold surface using Sn(OTf)₂ produced polylactide brushes under living conditions and provides the opportunity to prepare stereoregular or chiral surfaces by polymerization of enantiomerically pure monomers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3529–3538, 2001     

Synthesis and ring‐opening polymerization of new monoalkyl‐substituted lactides

New monoalkyl‐substituted lactides were synthesized by reaction of α‐hydroxy acids with 2‐bromopropionyl bromide, and polymerized with various catalysts in the presence of benzyl alcohol by ring‐opening polymerization (ROP). The classic tin(II) 2‐ethylhexanoate (Sn(Oct)₂) catalyst was leading to polymers with narrow distribution and predictable molecular weights, in polymerizations in bulk or toluene at 100 °C. The polymerization rate was corresponding to the steric hindrance of the alkyl substituents, such as butyl, hexyl, benzyl, isopropyl, and dimethyl groups. A yield of 83% was obtained with the hexyl‐substituted lactide after 1 h of polymerization. Excellent conversions (97%) could be achieved by using the alternative catalyst 4‐(dimethylamino)pyridine (DMAP). This latter organic catalyst was most efficient in polymerizing the more steric‐hindered lactides with good molecular weight and polydispersity control, in comparison to the tin(II) 2‐ethylhexanoate and tin(II) trifluoromethane sulfonate [Sn(OTf)₂] catalysts. The efficiency of the DMAP catalyst and the variability of the monomer synthesis route for new alkyl‐substituted lactides allow to prepare and to envision a wide range of new functionalized polylactides for the elaboration of tailored materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4379–4391, 2004     

Sulfonic acids as water‐soluble initiators for cationic polymerization in aqueous media with Yb(OTf)3

Aqueous sulfonic acids (HOSO₂R; R = CH₃, Ph‐p‐CH₃, and Ph‐p‐NO₂), coupled with a water‐tolerant Lewis acid, ytterbium triflate [Yb(OTf)₃; OTf =  OSO₂CF₃], initiate the cationic suspension polymerization of p‐methoxystyrene (pMOS) in heterogeneous aqueous media. They induce controlled polymerization of pMOS at 30 °C, and the molecular weights of the polymers (weight‐average molecular weight/number‐average molecular weight ∼ 1.7) increase with conversion. These suspension polymerizations are initiated by the entry of sulfonic acid from the aqueous phase into the organic phase and proceed via reversible activation of the sulfonyl terminus by the Lewis acid. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2728–2733, 2000     

Chemical synthesis of biodegradable aliphatic polyesters and polycarbonates catalyzed by novel versatile aluminum metal complexes bearing salen ligands

Two novel aluminum metal complexes ( 2 and 3 ) bearing salen ligands were in situ prepared from trimethyl aluminum (AlMe₃), methanol, and (R,R)‐N,N′‐bis(salicylidene)‐1,2‐diaminocyclohexane with original synthetic strategies, and a preliminarily resoluted (R,R)‐1,2‐diaminocyclohexane was applied as a synthetic precursor. By means of Fourier transform infrared spectrometry, NMR spectrometry, mass spectrometry, and single‐crystal X‐ray diffractometry, 2 and 3 were revealed to be distinct molecular structures with corresponding yields of 85 and 10%, respectively. Further studies via ²⁷Al NMR techniques and single‐crystal X‐ray diffraction indicated that dimeric metal complex 3 appeared in the six‐coordinated state, whereas there was a dynamic equilibrium transition between the five‐ and six‐coordinated states for metal complex 2 in a CDCl₃ solution. The more stable dimeric metal complex ( 3 ) exhibited two inequivalent aluminum metal centers coordinated to nitrogen atoms attributed to two different salen ligands, and this was different from the reported salen aluminum complex structures. Furthermore, 2 and 3 were employed as candidate catalysts for the ring‐opening polymerization (ROP) of some important biodegradable aliphatic polyesters and polycarbonates, including poly(?‐caprolactone) (PCL), poly(δ‐valerolactone), poly(trimethylene carbonate), and poly(2,2‐dimethyl trimethylene carbonate). The synthetic results indicated that both metal complexes efficiently catalyzed ROP at 100 °C in an anisole solution, and 3 showed much better controlled characteristics of ROP than 2 . Very narrow molecular weight distributions close to 1.21 for PCL were detected with 3 as the ROP catalyst. In addition, a catalytic mechanism study confirmed that ROP catalyzed by these metal complexes was in good agreement with the commonly accepted coordination polymerization reported for aluminum triiso [Al(OⁱPr)₃] and stannous octanoate [Sn(Oct)₂]. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 373–384, 2005     

Stereocontrol during the free‐radical polymerization of methacrylates with Lewis acids

The free‐radical polymerizations of methyl methacrylate (MMA), ethyl methacrylate, isopropyl methacrylate, and 2‐methoxyethyl methacrylate were carried out in the presence of various Lewis acids. The MMA polymerization in the presence of scandium trifluoromethanesulfonate [Sc(OTf)₃] in toluene or CHCl₃ produced a polymer with a higher isotacticity and heterotacticity than that produced in the absence of Sc(OTf)₃. Similar effects were observed during the polymerization of the other monomers. ScCl₃, Yb(OTf)₃, Er(OTf)₃, HfCl₄, HfBr₄, and In(OTf)₃ also increased the isotacticity and heterotacticity of the polymers. The effects of the Lewis acids were greater in a solvent with a lower polarity and were negligible in tetrahydrofuran and N,N‐dimethylformamide. Sc(OTf)₃ was also found to accelerate the polymerization of MMA. On the basis of an NMR analysis of a mixture of Sc(OTf)₃, MMA, and poly(methyl methacrylate), the monomer–Sc(OTf)₃ interaction seems to be involved in the stereochemical mechanism of the polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1463–1471, 2001     

Synthesis of polyester having pendent hydroxyl groups via regioselective dehydration polycondensations of dicarboxylic acids and diols by low temperature polycondensation

In this article, we describe the one‐step synthesis of polyesters having pendent hydroxyl groups by Lewis acid‐catalyzed, regioselective, dehydration polycondensations of diols (glycerol and sorbitol) and dicarboxylic acids [tartaric acid (TA) and malic acid (MA)] containing pendent hydroxyl groups, using low temperature polycondensation technique. Direct polycondensations of TA or MA and 1,9‐nonanediol catalyzed by scandium trifluoromethanesulfonate [Sc(OTf)₃] successfully yielded linear polyesters having hydroxyl functionality (M_n = ca. 1.0 × 10⁴). To demonstrate the reactivity of the pendent hydroxyl group, a glycosidation was performed. Poly(nonamethylene L ‐malate) showed significant higher biodegradability, compared with poly(nonamethylene L ‐tartrate) or poly(nonamethylene succinate). Stable poly(nonamethylene L ‐tartrate) emulsion could be prepared using poly(vinyl alcohol) as the surfactant, although emulsions consisting of poly(nonamethylene succinate) were unstable and phase‐separated within a few days. Furthermore, direct polycondensations of TA and diethylene glycol (DEG) or triethylene glycol (TEG) successfully produced water‐soluble polyesters having hydroxyl groups. This new polycondensation system may be extremely effective not only for advanced material design using functional monomers but also for effective utilization of biomass resources as chemical substances. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5747–5759, 2009     

Synthesis and characterization of well‐defined poly(2‐hydroxyethyl methacrylate‐co‐styrene)‐graft‐poly(ε‐caprolactone) by sequential controlled polymerization

A new graft copolymer, poly(2‐hydroxyethyl methacrylate‐co‐styrene) ‐graft‐poly(?‐caprolactone), was prepared by combination of reversible addition‐fragmentation chain transfer polymerization (RAFT) with coordination‐insertion ring‐opening polymerization (ROP). The copolymerization of styrene (St) and 2‐hydroxyethyl methacrylate (HEMA) was carried out at 60 °C in the presence of 2‐phenylprop‐2‐yl dithiobenzoate (PPDTB) using AIBN as initiator. The molecular weight of poly (2‐hydroxyethyl methacrylate‐co‐styrene) [poly(HEMA‐co‐St)] increased with the monomer conversion, and the molecular weight distribution was in the range of 1.09 ～ 1.39. The ring‐opening polymerization (ROP) of ?‐caprolactone was then initiated by the hydroxyl groups of the poly(HEMA‐co‐St) precursors in the presence of stannous octoate (Sn(Oct)₂). GPC and ¹H‐NMR data demonstrated the polymerization courses are under control, and nearly all hydroxyl groups took part in the initiation. The efficiency of grafting was very high. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5523–5529, 2004     

Synthesis and chiral recognition ability of optically active poly{N‐[(R)‐α‐methoxycarbonylbenzyl]methacrylamide} with various tacticities by radical polymerization using Lewis acids

The radical polymerization of an optically active methacrylamide, N‐[(R)‐α‐methoxycarbonylbenzyl]methacrylamide, was carried out in the absence and presence of Lewis acids such as yittribium trifluoromethanesulfonate [Yb(OTf)₃] and scandium trifluoromethanesulfonate [Sc(OTf)₃]. Catalytic amounts of the Lewis acids significantly affected the stereoregularity of the obtained polymers. The polymerization with Yb(OTf)₃ in tetrahydrofuran afforded isotactic polymers (up to mm = 87%), whereas the conventional radical method without the Lewis acid produced polymers rich in syndiotacticity (up to rr = 88%). The radical polymerization in the presence of MgBr₂ proceeded in a heterotactic‐selective manner (mr = 63%). Thus, the isotactic, syndiotactic, and heterotactic poly(methacrylamide)s were synthesized by the radical processes. The chiral recognition abilities of the obtained optically active poly(methacrylamide)s were affected by the stereoregularity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3354–3360, 2003     

Lipase Catalyzed Chemoselective Ring‐Opening Polymerization of ϵ‐Caprolactone in Presence of γ‐Hydroxy‐α‐methylenebutyric Acid

The ring‐opening polymerization (ROP) of ?‐caprolactone (CL) using γ‐hydroxy‐α‐methylenebutyric acid (HMBA) as the initiator was studied. The use of stannous octoate (Sn(Oct)₂) and Novozym 435 (Lipase B from Candida Antarctica) as catalysts was compared. Under enzymatic conditions, poly(?‐caprolactone) (PCL) with well‐defined end group functionalization was obtained. In contrast, under Sn(Oct)₂ catalysis, the lactonization of HMBA was observed as a side reaction which lead to an insufficient end group functionalization of the prepared polyesters.     

Microwave‐assisted synthesis and characterization of biodegradable block copolyesters based on poly(3‐hydroxyalkanoate)s and poly(D,L‐lactide)

Microwave (MW)‐assisted ring‐opening polymerization (ROP) provides a rapid and straightforward method for engineering a wide array of well‐defined poly(3‐hydroxyalkanoate)‐b‐poly(D,L ‐lactide) (PHA‐b‐PLA) diblock copolymers. On MW irradiation, the bulk ROP of D,L ‐lactide (LA) could be efficiently triggered by a series of monohydroxylated PHA‐based macroinitiators previously produced via acid‐catalyzed methanolysis of corresponding native PHAs, thus affording diblock copolyesters with tunable compositions. The dependence of LA polymerization on temperature, macroinitiator structure, irradiation time, and [LA]₀/[PHA]₀ molar ratio was carefully investigated. It turned out that initiator efficiency values close to 1 associated with conversions ranging from 50 to 85% were obtained only after 5 min at 115 °C. A kinetic investigation of the MW‐assisted ROP of LA gave evidence of its “living”/controlled character under the experimental conditions selected. Structural analyses and thermal properties of biodegradable diblock copolyesters were also performed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of block and end‐functionalized polyesters by triflimide‐catalyzed ring‐opening polymerization of ε‐caprolactone, 1,5‐dioxepan‐2‐one,and rac‐lactide

The ring‐opening polymerization (ROP) of cyclic esters, such as ε‐caprolactone, 1,5‐dioxepan‐2‐one, and racemic lactide using the combination of 3‐phenyl‐1‐propanol as the initiator and triflimide (HNTf₂) as the catalyst at room temperature with the [monomer]₀/[initiator]₀ ratio of 50/1 was investigated. The polymerizations homogeneously proceeded to afford poly(ε‐caprolactone) (PCL), poly(1,5‐dioxepan‐2‐one) (PDXO), and polylactide (PLA) with controlled molecular weights and narrow polydispersity indices. The molecular weight determined from an ¹H NMR analysis (PCL, M_n,NMR = 5380; PDXO, M_n,NMR = 5820; PLA, M_n,NMR = 6490) showed good agreement with the calculated values. The ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry analyses strongly indicated that the obtained compounds were the desired polyesters. The kinetic measurements confirmed the controlled/living nature for the HNTf₂‐catalyzed ROP of cyclic esters. A series of functional alcohols, such as propargyl alcohol, 6‐azido‐1‐hexanol, N‐(2‐hydroxyethyl)maleimide, 5‐hexen‐1‐ol, and 2‐hydroxyethyl methacrylate, successfully produced end‐functionalized polyesters. In addition, poly(ethylene glycol)‐block‐polyester, poly(δ‐valerolactone)‐block‐poly(ε‐caprolactone), and poly(ε‐caprolactone)‐block‐polylactide were synthesized using the HNTf₂‐catalyzed ROP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2455–2463     

Solvent‐free ring‐opening polymerization of lactones with hydrogen‐bonding bisurea catalyst

Development of effective organocatalysts for the living ring‐opening polymerization (ROP) of lactones is highly desired for the preparation of biocompatible and biodegradable polyesters with controlled microstructures and physical properties. Herein, a new class of hydrogen‐bond donating bisurea catalysts is reported for the ROP of lactones under solvent‐free conditions. ROP of lactones mediated by the bisurea/7‐methyl‐1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (MTBD) catalyst exhibits a living/controlled manner, affording the polymers and copolymers with the well‐defined structure, predictable molecular weight, narrow molecular weight distribution, and high selectivity for monomer at low catalyst loadings at ambient temperature. The possible mechanism of bisurea/MTBD‐catalyzed ROP of lactones is proposed, in which the bisurea activates the carbonyl group of lactones while MTBD facilitates the nucleophilic attack of the initiating/propagating alcohol by hydrogen bonding. Moreover, the poly(ε‐caprolactone‐co‐δ‐valerolactone) [P(CL‐co‐VL)] random copolymers with various compositions were synthesized using the bisurea/MTBD catalyst. The measurements of thermal properties and crystalline structure demonstrate that the CL and VL units are cocrystallized in the crystalline phase of P(CL‐co‐VL) copolymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 90–100     

In situ formation of Sn(IV) catalyst with increased activity in ε‐caprolactone and L‐lactide polymerization using stannous(II) 2‐ethylhexanoate

Ring‐opening polymerization (ROP) of ε‐caprolactone and L‐lactide (LA) was studied using stannous(II) 2‐ethylhexanoate (Sn(Oct)₂) with N,N‐dimethylformamide‐dimethyl acetal (DMF‐DMA). DMF‐DMA showed a tenfold improvement in catalytic activity over that of Sn(Oct)₂ under the same conditions. It also enhanced the capability to control molecular weight in the synthesis of small molecular weight polymers of polycaprolactone and polylactide (PLA). The high molecular weight polymerization demonstrated a strong capability to control molecular weight for the polymerization of LA: a molecular weight of PLA exceeding 400,000 was obtained at very low catalytic loadings. The individual polymerization rates of other tin reagents with DMF‐DMA also clearly increased. Applying this methodology could drastically reduce the time and cost required for the fabrication of these products to increase the competitive advantage of manufacturers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Facile synthesis of AB2‐type miktoarm star polymers through the combination of atom transfer radical polymerization and ring‐opening polymerization

A novel miktofunctional initiator ( 1 ), 2‐hydroxyethyl 3‐[(2‐bromopropanoyl)oxy]‐2‐{[(2‐bromopropanoyl)oxy]methyl}‐2‐methyl‐propanoate, possessing one initiating site for ring‐opening polymerization (ROP) and two initiating sites for atom transfer radical polymerization (ATRP), was synthesized in a three‐step reaction sequence. This initiator was first used in the ROP of ?‐caprolactone, and this led to a corresponding polymer with secondary bromide end groups. The obtained poly(?‐caprolactone) (PCL) was then used as a macroinitiator for the ATRP of tert‐butyl acrylate or methyl methacrylate, and this resulted in AB₂‐type PCL–[poly(tert‐butyl acrylate)]₂ or PCL–[poly(methyl methacrylate)]₂ miktoarm star polymers with controlled molecular weights and low polydispersities (weight‐average molecular weight/number‐average molecular weight < 1.23) via the ROP–ATRP sequence. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2313–2320, 2004     

Ring‐opening polymerization of cyclic esters promoted by phosphido‐diphosphine pincer group 3 complexes

Phosphido‐diphosphine Group 3 metal complexes 1–4 [(o‐C₆H₄PR₂)₂P‐M(CH₂SiMe₃)₂; R = Ph, 1 : M = Y, 2 : M = Sc; R = iPr, 3 : M = Y, 4 : M = Sc] are very efficient catalysts for the ring‐opening polymerization (ROP) of cyclic esters such as ε‐caprolactone (ε‐CL), L ‐lactide, and δ‐valerolactone under mild polymerization conditions. In the ROP of ε‐CL, complexes 1–4 promote quantitative conversion of high amount of monomer (up to 3000 equiv) with very high turnover frequencies (TOF) (～4 × 10⁴ mol_CL/mol_I h) showing a catalytic activity among the highest reported in the literature. The immortal and living ROP of ε‐CL and L ‐lactide is feasible by combining complexes 1–4 with 5 equiv of 2‐propanol. Polymers with controlled molecular parameters (M_n, end groups) and low polydispersities (M_w/M_n = 1.05–1.09) are formed as a result of fast alkoxide/alcohol exchange. In the ROP of δ‐valerolactone, complexes 1–4 showed the same activity observed for lactide (L ‐ and D ,L ‐lactide) producing high molecular weight polymers with narrow distribution of molar masses. Complexes 1–4 also promote the ROP of rac‐β butyrolactone affording atactic low molecular weight poly(hydroxybutyrate) bearing unsaturated end groups probably generated by elimination reactions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Bidentate coordination effect on polycondensation of amino acid esters between metal triflates and methoxy groups

To study the bidentate coordination effect on the polycondensation of L ‐valinates between metal triflates as a Lewis acid and methoxy groups, we carried out the polycondensation of 2‐methoxy‐4‐nitrophenyl L ‐valinate ( 1a ) and 2‐methoxyphenyl L ‐valinate ( 1b ) in the presence of the various kinds of rare‐earth triflates in DMF solution at room temperature. The polymerizations of 1a did not proceed without any metal triflates. In the presence of 5 mol% triflates, especially Sc(OTf)₃, the polymerization proceeded effectively. After the reaction mixture was poured into water, the product was collected, which was recognized as poly(L ‐valine)s by FTIR spectrum and GPC measurement. The yield of the product from the polymerization of 1a with Sc(OTf)₃ was higher than that from the polymerization of 4‐nitrophenyl L ‐valinate ( 1c ) with Sc(OTf)₃. This result indicates that the polymerization of 1a was promoted to introduce the methoxy group on the o‐position of the phenyl ring at the ester group with the aim of the bidentate coordination effect between metal triflates and L ‐valinate. As a control experiment, we carried out the polycondensation of 1b in the presence of 5 mol% metal triflates; however, any polymerization did not proceeded. That reason is from the lower activity of activated L ‐valinate ( 1b ). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2864–2868, 2008     

One‐step synthesis of poly(N‐vinylpyrrolidone)‐b‐poly(l‐lactide) block copolymers using a dual initiator for RAFT polymerization and ROP

Amphiphilic, biocompatible poly(N‐vinylpyrrolidone)‐b‐poly(l ‐lactide) (PVP‐b‐PLLA) block polymers were synthesized at 60 °C using a hydroxyl‐functionalized N,N‐diphenyldithiocarbamate reversible addition–fragmentation chain transfer (RAFT) agent, 2‐hydroxyethyl 2‐(N,N‐diphenylcarbamothioylthio)propanoate (HDPCP), as a dual initiator for RAFT polymerization and ring‐opening polymerization (ROP) in a one‐step procedure. 4‐Dimethylamino pyridine was used as the ROP catalyst for l ‐lactide. The two polymerization reactions proceeded in a controlled manner, but their polymerization rates were affected by the other polymerization process. This one‐step procedure is believed to be the most convenient method for synthesizing PVP‐b‐PLLA block copolymers. HDPCP can also be used for the one‐step synthesis of poly(N‐vinylcarbazole)‐b‐PLLA block copolymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1607–1613     

Synthesis and characterization of mid‐ and end‐chain functional telechelics by controlled polymerization methods and coupling processes

Well‐defined polystyrene‐ (PSt) or poly(ε‐caprolactone) (PCL)‐based polymers containing mid‐ or end‐chain 2,5 or 3,5‐ dibromobenzene moieties were prepared by controlled polymerization methods, such as atom transfer radical polymerization (ATRP) or ring opening polymerization (ROP). 1,4‐Dibromo‐2‐(bromomethyl)benzene, 1,3‐dibromo‐5‐(bromomethyl)benzene, and 1,4‐dibromo‐2,5‐di(bromomethyl)benzene were used as initiators in ATRP of styrene (St) in conjunction with CuBr/2,2′‐bipyridine as catalyst. 2,5‐Dibromo‐1,4‐(dihydroxymethyl)benzene initiated the ROP of ε‐caprolactone (CL) in the presence of stannous octoate (Sn(Oct)₂) catalyst. The reaction of these polymers with amino‐ or aldehyde‐functionalized monoboronic acids, in Suzuki‐type couplings, afforded the corresponding telechelics. Further functionalization with oxidable groups such as 2‐pyrrolyl or 1‐naphthyl was attained by condensation reactions of the amino or aldehyde groups with low molecular weight aldehydes or amines, respectively, with the formation of azomethine linkages. Preliminary attempts for the synthesis of fully conjugated poly(Schiff base) with polymeric segments as substituents, by oxidative polymerization of the macromonomers, are presented. All the starting, intermediate, or final polymers were structurally analyzed by spectral methods (¹H NMR, ¹³C NMR, and IR). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 727–743, 2006     

Synthesis of poly(vinylidene fluoride)‐b‐poly(styrene sulfonate) block copolymers by controlled radical polymerizations

Block copolymers based on poly(vinylidene fluoride), PVDF, and a series of poly(aromatic sulfonate) sequences were synthesized from controlled radical polymerizations (CRPs). According to the aromatic monomers, appropriate techniques of CRP were chosen: either iodine transfer polymerization (ITP) or atom transfer radical polymerization (ATRP) from PVDF‐I macromolecular chain transfer agents (CTAs) or PVDF‐CCl₃ macroinitiator, respectively. These precursors were produced either by ITP of VDF with C₆F₁₃I or by radical telomerization of VDF with chloroform, respectively. Poly(vinylidene fluoride)‐b‐poly(sodium styrene sulfonate), PVDF‐b‐PSSS, block copolymers were produced from both techniques via a direct polymerization of sodium styrene sulfonate (SSS) monomer or an indirect way with the use of styrene sulfonate ethyl ester (SSE) as a protected monomer. Although the reaction led to block copolymers, the kinetics of ITP of SSS showed that PVDF‐I macromolecular CTAs were not totally efficient because a limitation of the CTA consumption (56%) was observed. This was probably explained by both the low activity of the CTA (that contained inefficient PVDF‐CF₂CH₂? I) and a fast propagation rate of the monomer. That behavior was also noted in the ITP of SSE. On the other hand, ATRP of SSS initiated by PVDF‐CCl₃ was more controlled up to 50% of conversion leading to PVDF‐b‐PSSS block copolymer with an average number molar mass of 6000 g·mol^?1. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Sc(OTf)3 catalysed multicomponent synthesis of chromeno[2,3-d]pyrimidinetriones under solvent-free condition

An efficient, simple, and environmentally friendly synthesis of a series of chromeno[2,3-d]pyrimidine-trione derivatives has been accomplished via the three-component reaction of a barbituric acid, dimedone/cyclohexane-1,3-dione, and aromatic aldehydes using Sc(OTf)₃ as a recyclable catalyst under solvent-free condition. This method exploits the use of Sc(OTf)₃ as a Lewis acid catalyst in organic synthesis and offers many rewards such as excellent product yield and easy work-up procedure. Harmless reaction conditions, as well as the absence of side-products, are another green aspects of this protocol.