Quantum chemical study on enantioselective reduction of aromatic ketones catalyzed by chiral cyclic sulfur‐containing oxazaborolidines. Part 1. Structures and properties of catalysts

The ab initio molecular orbital method is employed to study the structures and properties of chiral cyclic sulfur‐containing oxazaborolidine, as a catalyst, and its borane adducts. All the structures are optimized completely by means of the Hartree–Fock method at 6‐31g* basis sets. The catalyst is a twisted chair structure and reacts with borane to form four plausible catalyst–borane adducts. Borane–sulfur adducts may be formed, but they barely react with aromatic ketone to form catalyst–borane–ketone adducts, because they are repulsed greatly by the atoms arising from the chair rear of the catalyst with a twisted chair structure. Borane–N adduct has the largest formation energy and is predicted to react easily with aromatic ketone to form catalyst–borane–ketone adducts. The formation of the catalyst–borane adducts causes the B_BH3 H_BH3 bond lengths of the BH₃ moiety to be increased and thus enhances the activity of the enantioselective catalytic reduction. The borane–N adduct is of great advantage to hydride transfer. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 78: 245–251, 2000     

Quantum chemical study on enantioselective reduction of aromatic ketones catalyzed by chiral cyclic sulfur‐containing oxazaborolidines. Part 3. Structures of catalyst–alkoxyborane adducts

The chiral cyclic sulfur‐containing oxazaborolidine catalyst reacts with aromatic ketone in the presence of borane to form the catalyst–alkoxyborane adduct with a B‐O‐B‐N four‐membered ring. The ab initio molecular orbital method is employed to study the structures of the catalyst–alkoxyborane adduct. All the calculated systems are optimized completely by means of the Hartree–Fock method at 6‐31g* basis sets. The B‐O‐B‐N four‐membered ring is stable, although there is strong tensile stress in the four‐membered ring. The catalyst–alkoxyborane adduct exists in four stable structures. Among these structures, the largest energy difference is only about 4 kJ/mol. In the catalyst–alkoxyborane adduct, the B(2) N(3) bond in the catalyst is weakened greatly. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 78: 261–268, 2000     

Quantum chemical study on enantioselective reduction of keto oxime ether with borane catalyzed by oxazaborolidine. Part 1. Structures of catalyst–borane–keto oxime ether adducts

In the present work, quantum chemical computations of the enantioselective reduction of keto oxime ether with borane catalyzed by chiral oxazaborolidine are performed by means of the Hartree–Fock and the density functional methods. The structures of oxazaborolidine, oxazaborolidine–borane adduct, and oxazaborolidine–borane–keto oxime ether adducts are optimized completely at the HF/6‐31g* and B3LYP/6‐31g* levels and their properties studied in detail. The oxazaborolidine catalyst is a twisted chair structure and reacts with borane at the nitrogen site of the catalyst to form the catalyst–borane adduct whose formation reaction is exothermic. The catalyst–borane adduct reacts easily with keto oxime ether to form catalyst–borane–keto oxime ether adducts that have eight stable structures. The coordination of the carbonyl oxygen in keto oxime ether at the boron site of the catalyst is of more advantage to the enantioselective reduction of keto oxime ether than the coordination of the oxime nitrogen in the keto oxime ether at the boron site is. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 81: 291–304, 2001     

手性含硫恶唑硼烷催化芳酮不对称还原反应的量子化学研究

用HF方法在6-31G^*基组下,对手性含硫恶唑硼烷催化苯乙酮不对称还原反应进行了量子化学从头算研究。还原反应经历了催化剂-硼烷加合物、催化剂-硼烷-酮加合物、催化剂-烷氧基硼烷加合物的生成以及催化剂-烷氧基硼烷加合物的离解过程。催化剂-硼烷加合物、催化剂-硼烷-酮加合物和催化剂-烷氧基硼烷加合物的生成分别为放热、吸热、放热过程;催化剂-烷氧基硼烷加合物离解成催化剂烷氧基硼烷为吸热过程。催化剂-硼烷-酮加合物和催化剂-烷氧基硼烷加合物都存在四种稳定的结构。最有利于氢转移的催化剂-硼烷-酮加合物结构是次低能量结构,并且具有扭曲的船形结构。催化剂-烷氧基硼烷加合物含有一个B-O-B-N四元环,尽管四元环有较大的张力,但加合物仍有较高的稳定性。     

Iron‐Catalyzed Dehydropolymerization: A Convenient Route to Poly(phosphinoboranes) with Molecular‐Weight Control

The catalyst loading is the key to control the molecular weight of the polymer in the iron‐catalyzed dehydropolymerization of phosphine–borane adducts. Studies showed that the reaction proceeds through a chain‐growth coordination–insertion mechanism.     

“Spontaneous” Ambient Temperature Dehydrocoupling of Aromatic Amine–Boranes

The dehydrocoupling/dehydrogenation behavior of primary arylamine–borane adducts ArNH₂ ? BH₃ ( 3 a – c ; Ar= a : Ph, b : p‐MeOC₆H₄, c : p‐CF₃C₆H₄) has been studied in detail both in solution at ambient temperature as well as in the solid state at ambient or elevated temperatures. The presence of a metal catalyst was found to be unnecessary for the release of H₂. From reactions of 3 a , b in concentrated solutions in THF at 22 °C over 24 h cyclotriborazanes (ArNH‐BH₂)₃ ( 7 a , b ) were isolated as THF adducts, 7 a , b? THF, or solvent‐free 7 a , which could not be obtained via heating of 3 a – c in the melt. The μ‐(anilino)diborane [H₂B(μ‐PhNH)(μ‐H)BH₂] ( 4 a ) was observed in the reaction of 3 a with BH₃?THF and was characterized in situ. The reaction of 3 a with PhNH₂ ( 2 a ) was found to provide a new, convenient method for the preparation of dianilinoborane (PhNH)₂BH ( 5 a ), which has potential generality. This observation, together with further studies of reactions of 4 a , 5 a , and 7 a , b , provided insight into the mechanism of the catalyst‐free ambient temperature dehydrocoupling of 3 a – c in solution. For example, the reaction of 4 a with 5 a yields 6 a and 7 a . It was found that borazines (ArN‐BH)₃ ( 6 a – c ) are not simply formed via dehydrogenation of cyclotriborazanes 7 a – c in solution. The transformation of 7 a to 6 a is slowly induced by 5 a and proceeds via regeneration of 3 a . The adducts 3 a – c also underwent rapid dehydrocoupling in the solid state at elevated temperatures and even very slowly at ambient temperature. From aniline–borane derivative 3 c , the linear iminoborane oligomer (p‐CF₃C₆H₄)N[BH‐NH(p‐CF₃C₆H₄)]₂ ( 11 ) was obtained. The single‐crystal X‐ray structures of 3 a – c , 5 a , 7 a , 7 b? THF, and 11 are discussed.     

CC Coupling of Ketones with Methanol Catalyzed by a N‐Heterocyclic Carbene–Phosphine Iridium Complex

An N‐heterocyclic carbene–phosphine iridium complex system was found to be a very efficient catalyst for the methylation of ketone via a hydrogen transfer reaction. Mild conditions together with low catalyst loading (1 mol %) were used for a tandem process which involves the dehydrogenation of methanol, C?C bond formation with a ketone, and hydrogenation of the new generated double bond by iridium hydride to give the alkylated product. Using this iridium catalyst system, a number of branched ketones were synthesized with good to excellent conversions and yields.     

Quantum chemical study on enantioselective reduction of keto oxime ether with borane catalyzed by oxazaborolidine. Part 3. Properties of intermediates during hydride transfer

In the current article, the structures and properties of intermediates during the hydride transfer for the prior coordination of the carbonyl oxygen of keto oxime ether at B(2) of oxazaborolidine are discussed. All the structures are optimized completely by means of the Hartree–Fock (HF) and the density functional methods at the HF/6‐31G(d) and Becke's three‐parameter exchange functional and the gradient‐corrected functional of Lee, Yang, and Paar (B3LYP)/6‐31G(d) levels. The hydride transfer from BH₃ to the carbonyl carbon in oxazaborolidine‐borane‐keto oxime ether adduct results in the formation of the adduct 4a* with a seven‐membered ring. This adduct has four stable structures. Another hydride of BH₂ transfers to the oxime carbon in 4a* , leading to the adduct 5a* , which has also four stable structures. Among all the structures of 5a* , the most stable structure can generate (1S, 2R)‐cis amino alcohol, which is in agreement with that obtained in the experiment. This enantioselective reduction may go through the process in which oxazaborolidine‐borane‐keto oxime ether adduct is directly transformed into the adduct 4a* with a seven‐membered ring. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 93: 307–316, 2003     

Regioselective Amine–Borane Cyclization: Towards the Synthesis of 1,2‐BN‐3‐Cyclohexene by Copper‐Assisted Triazole/Gold Catalysis

The combination of triazole/gold (TA‐Au) and Cu(OTf)₂ is identified as the optimal catalytic system for promoting intramolecular hydroboration for the synthesis of a six‐membered cyclic amine–borane. Excellent yields (up to 95 %) and regioselectivities (5‐exo vs. 6‐endo) were achieved through catalyst control and sequential dilution. Good functional‐group tolerance was attained, thus allowing the preparation of highly functionalized cyclic amine–borane substrates, which could not be achieved using other methods. Deuterium‐labeling studies support the involvement of a hydride addition to a gold‐activated alkyne with subsequent C?B bond formation.     

Polymers from a levopimaric acid–acrylic acid Diels–Alder adduct: Synthesis and characterization

The Diels–Alder adduct of levopimaric acid with acrylic acid was efficiently prepared from resin acids. When the adduct was subjected to a dehydrodecarboxylation reaction, a ketone diacid derivative was obtained. New ketone type linear polymers were synthesized by the advanced dehyrodecarboxylation, a nonconventional polycondensation reaction, of both the above in presence of sulfonic catalysts. The polyketones turned out to be excellent tackifiers in adhesive formulae. The ketone polymers were condensed with diamines to give crosslinked polyazomethines. The structures of the monomers and polymers were established by means of elemental analysis, IR and NMR spectroscopy, and molecular weight determinations. Both the polyketones and polyazomethines were low‐molecular‐weight polymers, soluble in some polar and nonpolar solvents. The thermal behavior of the monomers and polymers was evaluated by thermogravimetric analysis. The thermal studies showed that the polymers were substances with good thermal stability, except the polyazomethine synthesized by the condensation of polyketone with an aromatic diamine, which appeared to be a substance with high thermal stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5979–5990, 2007     

Ab inito Study on Enantioselective Reduction of Ketones Catalyzed by Thiazolidino[3,4—c]oxazaborolidines

The ab initio molecular orbital method is employed to study the enantioselective reduction of acetophenone with borane catalyzed by thiszolidino[3,4-c]oxazaborolidine.Computation result shows that the controlling step for the reduction is the decomposition of the catalyst-alkoxyborane adduct and the reduction leads to S-alcohols.The transition atate of the hydride transfer from the borane moiety to the carbonyl carbon of acetophenone is a twisted chair structure with a B(2)-N(3)-BBH3-HBH3-CCo-OCO6-membered ring.     

Brønsted Acid Catalyzed Friedel–Crafts‐Type Coupling and Dedinitrogenation Reactions of Vinyldiazo Compounds

The direct Friedel–Crafts‐type coupling and dedinitrogenation reactions of vinyldiazo compounds with aromatic compounds using a metal‐free strategy are described. This Brønsted acid catalyzed method is efficient for the formation of α‐diazo β‐carbocations (vinyldiazonium ions), vinyl carbocations, and allylic or homoallylic carbocation species via vinyldiazo compounds. By choosing suitable nucleophilic reagents to selectively capture these intermediates, both trisubstituted α,β‐unsaturated esters, β‐indole‐substituted diazo esters, and dienes are obtained with good to high yields and selectivity. Experimental insights implicate a reaction mechanism involving the selective protonation of vinyldiazo compounds and the subsequent release of dinitrogen to form vinyl cations that undergo intramolecular 1,3‐ and 1,4‐ hydride transfer processes as well as fragmentation.     

Identity hydride-ion transfer from C-H donors to C acceptor sites. Enthalpies of hydride addition and enthalpies of activation. Comparison with C...H...C proton transfer. An ab initio study

Enthalpies of addition of hydride ion to eleven carbonyl acceptors (X-CHO), two conjugate addition sites (X-CH=CH2; X = CHO, NO2), eight carbenium ion acceptors, fulvene, borane, and SiH3(+) were calculated at the MP2/6-311+G level. Correlation between calculated and experimental enthalpies of addition of hydride ion is excellent. Transition states (ts) for the identity hydride transfers between the acceptors and their corresponding hydride adducts (hydride donors) were also calculated. The carbonyl and fulvene reactions have transition states with one imaginary frequency: the hydrogen transfer coordinate. The carbenium ions, borane, and SiH3(+) gave not transition states but stable compounds upon addition of the hydride donor. Computational differences between these hydride transfers and previously reported proton transfers include shorter partial C...H bonds and a tendency toward bent C...H...C angles for the hydride transfer ts and addition compound structures, particularly when a bent geometry improves interactions elsewhere in the structure. These and other differences are explained by modeling the hydride transfer ts and addition compounds as two-electron, three-center systems involving the transfer termini and the shared hydrogen but the proton transfer ts structures as four-electron, three-center systems. Charge and geometry measures suggest transition states in which these features change synchronously, again in contrast to many proton transfer reactions. For the X-CHO set, polar effects dominate enthalpies of hydride addition, with resonance effects also important for resonance donors; these preferentially stabilize the acceptor, reducing its hydride ion affinity. Activation enthalpies are dominated by resonance stabilization of the acceptors, greatly attenuated in the transition states.     

Metal‐Free Ammonia–Borane Dehydrogenation Catalyzed by a Bis(borane) Lewis Acid

The storage of energy in a safe and environmentally benign way is one of the main challenges of today’s society. Ammonia–borane (AB=NH₃BH₃) has been proposed as a possible candidate for the chemical storage of hydrogen. However, the efficient release of hydrogen is still an active field of research. Herein, we present a metal‐free bis(borane) Lewis acid catalyst that promotes the evolution of up to 2.5 equivalents of H₂ per AB molecule. The catalyst can be reused multiple times without loss of activity. The moderate temperature of 60 °C allows for controlling the supply of H₂ on demand simply by heating and cooling. Mechanistic studies give preliminary insights into the kinetics and mechanism of the catalytic reaction.     

Carbon–silica dual‐phase filler,a new‐generation reinforcing agent for rubber. Part VI. Time–temperature superposition of dynamic properties of carbon–silica‐dual‐phase‐filler‐filled vulcanizates

Dynamic properties such as shear modulus, loss modulus, and loss factor were obtained at a low strain amplitude over a wide range of frequencies and temperatures on vulcanizates filled with carbon black, silica, and carbon–silica dual‐phase filler. The data were shifted along the frequency scale. Instead of a single smooth master curve, a pseudomaster curve with a feather‐like structure is obtained. This effect is especially pronounced for the loss factor. Multiple factors may be responsible for this. Among others, filler networking and polymer–filler interaction may play a dominant role. The effect of the carbon–silica dual‐phase filler on the overall dynamic properties of the vulcanizates is similar to that of silica. Their tan δ values are much lower at lower frequencies and are relatively higher at higher frequencies. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1240–1249, 2000     

Towards the design of novel boron‐ and nitrogen‐substituted ammonia‐borane and bifunctional arene ruthenium catalysts for hydrogen storage

Electronic‐structure density functional theory calculations have been performed to construct the potential energy surface for H₂ release from ammonia‐borane, with a novel bifunctional cationic ruthenium catalyst based on the sterically bulky β‐diketiminato ligand (Schreiber et al., ACS Catal. 2012, 2, 2505). The focus is on identifying both a suitable substitution pattern for ammonia‐borane optimized for chemical hydrogen storage and allowing for low‐energy dehydrogenation. The interaction of ammonia‐borane, and related substituted ammonia‐boranes, with a bifunctional η⁶‐arene ruthenium catalyst and associated variants is investigated for dehydrogenation. Interestingly, in a number of cases, hydride‐proton transfer from the substituted ammonia‐borane to the catalyst undergoes a barrier‐less process in the gas phase, with rapid formation of hydrogenated catalyst in the gas phase. Amongst the catalysts considered, N,N‐difluoro ammonia‐borane and N‐phenyl ammonia‐borane systems resulted in negative activation energy barriers. However, these types of ammonia‐boranes are inherently thermodynamically unstable and undergo barrierless decay in the gas phase. Apart from N,N‐difluoro ammonia‐borane, the interaction between different types of catalyst and ammonia borane was modeled in the solvent phase, revealing free‐energy barriers slightly higher than those in the gas phase. Amongst the various potential candidate Ru‐complexes screened, few are found to differ in terms of efficiency for the dehydrogenation (rate‐limiting) step. To model dehydrogenation more accurately, a selection of explicit protic solvent molecules was considered, with the goal of lowering energy barriers for H‐H recombination. It was found that primary (1°), 2°, and 3° alcohols are the most suitable to enhance reaction rate. © 2014 Wiley Periodicals, Inc.     

Palladium–cadmium sulfide nanopowder at oil–water interface as an effective catalyst for Suzuki–Miyaura reactions

A simple and effective strategy is described for the synthesis of Pd–CdS nanopowder by the reduction of an organopalladium(II) complex, [PdCl₂(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene), in the presence of CdS quantum dots (QDs) at a toluene–water interface. We investigated the impact of addition of CdS QDs on catalytic activity of Pd nanoparticles (NPs). The Pd–CdS nanopowder functions as an efficient catalyst for Suzuki–Miyaura reactions for the formation of carbon–carbon bonds. There is a high electron density on Pd NPs and due to their high electron affinity they behave as an electron scavenger from CdS increasing the rate of oxidative addition, which is the rate‐determining step of the catalytic cycle, and, just as we expect, the C─C coupling reaction with the Pd–CdS nanopowder is faster and occurs in less time than that with Pd nanocatalysts. Compared to classical reactions, this method consistently has the advantages of short reaction times, high yields in a green solvent, reusability of the catalyst without considerable loss of catalytic activity and low cost, and is a facile method for the preparation of the catalyst.     

Bifunctional Heterogeneous Catalysis of Silica–Alumina‐Supported Tertiary Amines with Controlled Acid–Base Interactions for Efficient 1,4‐Addition Reactions

We report the first tunable bifunctional surface of silica–alumina‐supported tertiary amines (SA–NEt₂) active for catalytic 1,4‐addition reactions of nitroalkanes and thiols to electron‐deficient alkenes. The 1,4‐addition reaction of nitroalkanes to electron‐deficient alkenes is one of the most useful carbon–carbon bond‐forming reactions and applicable toward a wide range of organic syntheses. The reaction between nitroethane and methyl vinyl ketone scarcely proceeded with either SA or homogeneous amines, and a mixture of SA and amines showed very low catalytic activity. In addition, undesirable side reactions occurred in the case of a strong base like sodium ethoxide employed as a catalytic reagent. Only the present SA‐supported amine (SA–NEt₂) catalyst enabled selective formation of a double‐alkylated product without promotions of side reactions such as an intramolecular cyclization reaction. The heterogeneous SA–NEt₂ catalyst was easily recovered from the reaction mixture by simple filtration and reusable with retention of its catalytic activity and selectivity. Furthermore, the SA–NEt₂ catalyst system was applicable to the addition reaction of other nitroalkanes and thiols to various electron‐deficient alkenes. The solid‐state magic‐angle spinning (MAS) NMR spectroscopic analyses, including variable‐contact‐time ¹³C cross‐polarization (CP)/MAS NMR spectroscopy, revealed that acid–base interactions between surface acid sites and immobilized amines can be controlled by pretreatment of SA at different temperatures. The catalytic activities for these addition reactions were strongly affected by the surface acid–base interactions.     

Stereoisomeric effects in thermo‐remendable polymer networks based on Diels–Alder crosslink reactions

This study describes the synthesis, the spectroscopic, and the thermal characterization of linear and crosslinked polymers as well as a number of corresponding model compounds, containing Diels–Alder adducts derived from furan and maleimide groups. The thermal reversibility (rDA, DA) of structurally varied model compounds, polymeric and network structures were studied by differential scanning calorimetry, where possible in combination with ¹H NMR spectroscopy. It was established that the endo and exo DA stereoisomers show significantly different thermal responses: the rDA of the endo DA‐adducts typically takes place at 20–40 K lower temperatures than that of the corresponding exo DA‐adducts in all cases, with the exception of some aromatic maleimides. Although in situ isomerization was observed to a limited extent and only in some cases, this effect is not expected to influence the thermoremendability of DA‐crosslinked networks being dependent on two separate stereoisomeric rDA steps. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3456–3467, 2010     

Arsenic speciation in some environmental samples: a comparative study of HG–GC–QFAAS and HPLC–ICP–MS methods

Some water and soil extracts polluted with arsenic, and a sewage sludge certified for total arsenic have been analysed by high‐performance liquid chromatography–inductively coupled plasma–mass spectrometry (HPLC–ICP–MS) and hydride generation–gas chromatography– quartz furnace atomic absorption spectrometry (HG–GC–QFAAS techniques.) Detection limits in the range of 200–400 and 2–10 ng l⁻¹ respectively allowed the determination of inorganic [As(III), As(V)] and methylated (DMA, MMA, TMAO) arsenic species present in these samples. Results obtained by both methods are well correlated overall, whatever the arsenic chemical form and concentration range (8–10 000 μg l⁻¹). Comparison of these results enabled us to point out features and disadvantages of each analytical method and to reach a conclusion that they are suitable for arsenic speciation in these environmental matrices. Copyright © 2000 John Wiley & Sons, Ltd.