Preparation and properties of poly(styrene-co-maleic anhydride)/silica hybrid materials by the in situ sol–gel process

Poly(styrene-co-maleic anhydride)/silica hybrid material has been successfully prepared from styrene–maleic anhydride copolymer and tetraethoxysilane (TEOS) in the presence of a coupling agent (3-aminopropyl)triethoxysilane (APTES) by an in situ sol–gel process. It was observed that the gel time of sol–gel solution was dramatically influenced by the amount of APTES. The hybrid material exhibits optical transparency almost as good as both silica gel and the copolymer. The covalent bonds between organic and inorganic phases were introduced by the aminolysis reaction of the amino group with maleic anhydride units of copolymer to form a copolymer bearing trimethoxysilyl groups, which undergo hydrolytic polycondensation with TEOS. The differential scanning calorimetry (DSC) showed that the glass transition temperature of the hybrid materials increases with increasing of SiO₂ composition. Photographs of scanning electron microscopy (SEM) and atomic force microscopy (AFM) inferred that the size of the inorganic particles in the hybrid materials was less than 20 nm. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1607–1613, 1998     

Stable second‐order nonlinear optical poly(amide–imide)/inorganic materials via simultaneous sequential self‐repetitive reaction and sol–gel process

A series of thermally stable organic/inorganic second‐order nonlinear optical (NLO) composites via sequential self‐repetitive reaction (SSRR) and sol–gel process has been developed. This SSRR is based on carbodiimide (CDI) chemistry. The difunctional azo chromophores (2,4‐diamino‐4′‐(4‐ nitrophenyl‐diazenyl)azobenzene (DNDA)) was reacted with excessive amount of 4, 4′‐methylene‐ diphenylisocyanate (MDI) to form poly‐CDI, and subsequently trimellitic anhydride (TMA) was added to obtain poly(N‐acylurea). The organic/inorganic composites containing prepolymer of phenyltriethoxysilane (PTEOS) and poly(N‐acylurea) in different weight ratios (10:90, 30:70, 50:50, 70:30, 90:10 wt%) were prepared, respectively. The moderate glass transition temperature (T_g) characteristic of the poly(N‐acylurea) allows the NLO‐active polymer to achieve high poling efficiency. After in situ poling and curing process, the T_gs of the composites were elevated, and higher than that of the pristine poly(amide–imide) sample. Electro‐optical (EO) coefficients (r₃₃) of about 5.5 ～ 18.0 pm/V at 830 nm were obtained. Excellent temporal stability at 100°C, and waveguide characteristics (3.1–4.2 dB/cm at 830 nm) were also obtained for these composites. Copyright © 2008 John Wiley & Sons, Ltd.     

溶胶-凝胶法制备丙烯酸甲酯-衣康酸酐共聚物/SiO_2杂化材料

以丙烯酸甲酯（ ＭＡ） 和衣康酸酐（Ｉｔｎ） 的无规共聚物和原硅酸四乙酯（ＴＥＯＳ） 作为有机相与无机相前驱体,以３ 氨丙基三乙氧基硅烷（ＡＰＴＥＳ） 为偶联剂,通过溶胶 凝胶过程制备出有机 无机杂化材料．并通过ＳＥＭ、ＤＳＣ 等方法考查了偶联剂用量对所得材料结构及性能的影响．     

Solid‐state lasers based on inorganic–organic hybrid materials obtained by combined sol–gel polymer technology

Sol–gel glass matrices in which organic laser dyes are embedded can be used as the gain medium in solid‐state, continuously tunable lasers. Such lasers are very simple to construct, and potentially very compact and efficient. Unlike the commonly used liquid dye laser systems, solid‐state dye lasers can be made mechanically robust and portable. In this article, the development of sol–gel/dye lasers, including the sol–gel technology, dye properties, and laser operation, is reviewed. In addition, new solid‐state hosts (such as polyurethane/silica ORMOSILs), additional organic dyes (cyanines), and new studies on the stability of the dyes are presented. Copyright © 2004 John Wiley & Sons, Ltd.     

Organic–inorganic hybrid membranes prepared from the sol–gel process of poly(butyleneadipate‐co‐terephthalate) and TiO2

Organic–inorganic hybrids based on poly(butyleneadipate‐co‐terephthalate)/titanium dioxide (PBAT/TiO₂) hybrid membranes were prepared via a sol–gel process. The PBAT/TiO₂ hybrid membranes were prepared for various PBAT/TiO₂ ratios. The resulting hybrids were characterized with a morphological structure, hydrophilicity, biodegradability, and thermal properties. The results showed that macrovoids underwent a transition into a sponge‐like membrane structure with the addition of TiO₂. After sol–gel transition, a strong interaction between the inorganic network and polymeric chains led to an increase in glass transition temperature (T_g), thermal degrading temperature, and hydrophilicity, and hence a higher biodegradability. According to X‐ray diffraction measurements of the crystal structure of the hybrid, the presence of TiO₂ did not change the crystal structure of PBAT. TiO₂ networks are uniformly dispersed into the PBAT matrix and no aggregation of TiO₂ networks in the hybrid membranes was observed through the small angle X‐ray scattering measurements. Thus, the sol–gel process of PBAT and TiO₂ can be used to prepare a hybrid with higher application temperature and faster biodegradation rate. Copyright © 2008 John Wiley & Sons, Ltd.     

Energy‐damping behaviors of poly(methyl acrylate‐co‐divinylbenzene) microspheres coated with a porous nickel–phosphorus layer

Hybrid microspheres of poly(methyl acrylate‐co‐divinylbenzene) (PMADVB) with a thin and porous nickel–phosphorus (Ni–P) alloy layer were prepared via suspension polymerization and electroless nickel plating. The characterization of pristine and nickel‐coated microspheres was carried out with a differential scanning calorimeter and a scanning electron spectroscope equipped with an energy‐dispersive system. The glass‐transition range of Ni–P‐coated PMADVB was broadened and extended in the higher temperature direction. This effect allowed the PMADVB network to embrace more diversified energy states of the segment motion, this being a desired feature for damping sound waves. The low‐frequency (100–1000‐Hz) sound absorption behavior of the microspheres was tested with a sound attenuation kit. Besides the testing of their low‐frequency damping performance, an investigation into the ultrasonic‐wave (～35 kHz) absorption feature of the microspheres was conducted through chemical means; that is, the attenuation to the ultrasonic wave with respect to the unprotective situation was assessed through the chemisorption extent of copper ions on a biomass adsorbent. The Ni–P deposition layer was found to augment the damping capacity of the polymer network. The alloy layer was determined to cause an expansion of the glass‐transition range of PMADVB and its wave‐scattering capability because this layer was made up of submicrometer metallic grains. In this work, the particulars of the metal–polymer interactions were associated with a core–shell structure. The metal outer layer was thought to create a spherical temperature field inside the PMADVB network, and concerted motions of the polymer segments resulted. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2710–2723, 2004     

Preparation,characterization, and properties of novolac‐type phenolic/SiO2 hybrid organic–inorganic nanocomposite materials by sol–gel method

This article describes the preparation of novolac‐type phenolic resin/silica hybrid organic–inorganic nanocomposite, with a sol–gel process. The coupling agent was used to improve the interface between the organic and inorganic phases. The effect of the structure of the nanocomposite on its physical and chemical properties is discussed. The coupling agent reacts with the resin to form covalent bonds. The structure of the modified hybrid nanocomposites was identified with a Fourier transform infrared spectroscope. The silica network was characterized by nuclear magnetic resonance imaging (²⁹Si NMR). Results revealed that Q₄ (tetrasubstituted) and T₃ (trisubstituted) are the dominant microstructures. The size of the silica in the phenolic resin was characterized with a scanning electron microscope. The size of the particles of inorganic silica in the modified system was less than 100 nm. The nanocomposite exhibited good transparency. Moreover, the thermal and mechanical properties exhibited significant improvement. The modified hybrid composite exhibited favorable thermal properties. The temperature at which a weight loss of 5% occurred increased from 281 to 350 °C. The flexural strength increased by 6–30%. The limiting oxygen index of the nanocomposite reached 37, and the Underwriters Laboratory test was 94V‐0. Consequently, these materials possess excellent flame‐retardant properties. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 905–913, 2003     

Synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐co‐ethyl acrylate] by incorporation of carbon dioxide into epoxide polymer and the miscibility behavior of its blends with poly(methyl methacrylate) or poly(vinyl chloride)

This study was related to the investigation of the chemical fixation of carbon dioxide to a copolymer bearing epoxide and the application of the cyclic carbonate group containing copolymer‐to‐polymer blends. In the synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐co‐ethyl acrylate] [poly(DOMA‐co‐EA)] from poly(glycidyl methacrylate‐co‐ethyl acrylate) [poly(GMA‐co‐EA)] and CO₂, quaternary ammonium salts showed good catalytic activity. The films of poly(DOMA‐co‐EA) with poly(methyl methacrylate) (PMMA) or poly(vinyl chloride) (PVC) blends were cast from N,N′‐dimethylformamide solution. The miscibility of the blends of poly(DOMA‐co‐EA) with PMMA or PVC have been investigated both by DSC and visual inspection of the blends. The optical clarity test and DSC analysis showed that poly(DOMA‐co‐EA) containing blends were miscible over the whole composition range. The miscibility behaviors were discussed in terms of Fourier transform infrared spectra and interaction parameters based on the binary interaction model. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1472–1480, 2001     

Effect of the comonomer content on the mechanical parameters and microhardness values in poly(ethylene‐co‐1‐octadecene) synthesized by a metallocene catalyst

Stress–strain and microhardness measurements were carried out on a series of copolymers of ethylene and 1‐octadecene with different comonomer contents in the corresponding homopolymer of ethylene, synthesized with a metallocene catalyst. The different mechanical properties, deduced from the stress–strain curves (Young's modulus, yield stress, deformation at break, and energy to break) are interpreted in terms of the crystallinity and molecular weight of the samples because these two characteristics show considerable variations with the comonomer content. The microhardness values are explained in terms of these properties, and they are also correlated with Young's moduli and yield stresses deduced from the stress–strain curves. Linear relations are found between microhardness and yield stress and between the logarithm of the microhardness and the logarithm of the elastic modulus. The properties deduced from these lines are compared with literature values. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 277–285, 2001     

Temperature‐induced spontaneous sol–gel transitions of poly(D,L‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(D,L‐lactic acid‐co‐glycolic acid) triblock copolymers and their end‐capped derivatives in water

The spontaneous hydrogel formation of a sort of biocompatible and biodegradable amphiphilic block copolymer in water was observed, and the underlying gelling mechanism was assumed. A series of ABA‐type triblock copolymers [poly(D,L ‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(D,L ‐lactic acid‐co‐glycolic acid)] and different derivatives end‐capped by small alkyl groups were synthesized, and the aqueous phase behaviors of these samples were studied. The virgin triblock copolymers and most of the derivatives exhibited a temperature‐dependent reversible sol–gel transition in water. Both the poly(D,L ‐lactic acid‐co‐glycolic acid) length and end group were found to significantly tune the gel windows in the phase diagrams, but with different behaviors. The critical micelle concentrations were much lower than the associated critical gel concentrations, and an intact micellar structure remained after gelation. A combination of various measurement techniques confirmed that the sol–gel transition with an increase in the temperature was induced not simply via the self‐assembly of amphiphilic polymer chains but also via the further hydrophobic aggregation of micelles resulting in a micelle network due to a large‐scale self‐assembly. The coarsening of the micelle network was further suggested to account for the transition from a transparent gel to an opaque gel. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1122–1133, 2007     

Miscibility,crystallization kinetics,and morphology of poly(β‐hydroxybutyrate) and poly(methyl acrylate) blends

The miscibility, spherulite growth kinetics, and morphology of binary blends of poly(β‐hydroxybutyrate) (PHB) and poly(methyl acrylate) (PMA) were studied with differential scanning calorimetry, optical microscopy, and small‐angle X‐ray scattering (SAXS). As the PMA content increases in the blends, the glass‐transition temperature and cold‐crystallization temperature increase, but the melting point decreases. The interaction parameter between PHB and PMA, obtained from an analysis of the equilibrium‐melting‐point depression, is −0.074. The presence of an amorphous PMA component results in a reduction in the rate of spherulite growth of PHB. The radial growth rates of spherulites were analyzed with the Lauritzen–Hoffman model. The spherulites of PHB were volume‐filled, indicating the inclusion of PMA within the spherulites. The long period obtained from SAXS increases with increased PMA content, implying that the amorphous PMA is entrapped in the interlamellar region of PHB during the crystallization process of PHB. All the results presented show that PHB and PMA are miscible in the melt. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1860–1867, 2000     

Real‐time Fourier transform infrared study of the free‐radical ultraviolet‐induced polymerization of a hybrid sol–gel. II. The effect of physicochemical parameters on the photopolymerization kinetics

Free‐radical photocurable hybrid sol–gel materials have gained special interest during the last decades. Compared to thermally processed materials, they present the advantages of fast curing, low energy consumption, and spatiotemporal control of the reaction. Although comprehension of the photochemical step is fundamental, little is known about the characteristic of photochemistry in this kind of material. Real‐time Fourier transform infrared spectroscopy was used to study the photopolymerization of a hybrid sol–gel upon ultraviolet irradiation. Various photoinitiator systems were tested for their efficiency in inducing the polymerization of pendant polymerizable moieties anchored on a partially condensed silicate network. The presence of O₂ and the nature of the polymerizable function were shown to be crucial factors in the photoinduced process. The effects of the photoinitiator concentration and light intensity were also studied. These results were explained in terms of classical kinetic models developed for all‐organic photopolymers to point out the distinctive aspects related to the use of photoinitiated polymerization in hybrid sol–gel materials. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 831–840, 2003     

Nanostructured organic–inorganic hybrid films prepared by the sol–gel method from self‐assemblies of PS‐b‐paptes‐b‐PS triblock copolymers

ABA‐based triblock copolymers of styrene as block ends and gelable 3‐acryloxypropyltriethoxysilane (APTES) as the middle block were successfully prepared through nitroxide‐mediated polymerization (NMP). The copolymers were bulk self‐assembled into films and the degree of phase separation between the two blocks was evaluated by differential scanning calorimetry (DSC). Their morphology was examined through small angle X‐ray scattering (SAXS) and transmission electron microscopy (TEM), whereas the mechanical properties of the corresponding cross‐linked self‐assembled nanostructures were characterized by dynamic mechanical analysis (DMA). Acidic treatment of the triblock copolymers favored the hydrolysis and condensation reactions of the APTES‐rich nanophase, and induced a mechanical reinforcement evidenced by the increase of storage modulus values and the shift of the glass transition temperature to higher temperatures due to confinement effects. In addition, the lamellar structure of the hybrid films was retained after the removal of the organic part by calcination. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Cu(0)/2,6‐bis(imino)pyridines catalyzed single‐electron transfer‐living radical polymerization of methyl methacrylate initiated with poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)

A series of 2,6‐bis(imino)pyridines, as common ligands for late transition metal catalyst in ethylene coordination polymerization, were successfully employed in single‐electron transfer‐living radical polymerization (SET‐LRP) of methyl methacrylate (MMA) by using poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) (P(VDF‐co‐CTFE)) as macroinitiator with low concentration of copper catalyst under relative mild‐reaction conditions. Well‐controlled polymerization features were observed under varied reaction conditions including reaction temperature, catalyst concentration, as well as monomer amount in feed. The typical side reactions including the chain‐transfer reaction and dehydrochlorination reaction happened on P(VDF‐co‐CTFE) in atom‐transfer radical polymerization process were avoided in current system. The relationship between the catalytic activity and the chemical structure of 2,6‐bis(imino)pyridine ligands was investigated by comparing both the electrochemical properties of Cu(II)/2,6‐bis(imino)pyridine and the kinetic results of SET‐LRP of MMA catalyzed with different ligands. The substitute groups onto N‐binding sites with proper steric bulk and electron donating are desirable for both high‐propagation reaction rate and C? Cl bonds activation capability on P(VDF‐co‐CTFE). The catalytic activity of Cu(0)/2,6‐bis(imino)pyridines is comparable with Cu(0)/2,2′‐bipyridine under the consistent reaction conditions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4378–4388     

Synthesis of superparamagnetic and thermoresponsive hybrid nanoparticles via surface‐mediated RAFT polymerization of di(ethylene glycol) ethyl ether acrylate and (oligoethylene glycol) methyl ether acrylate

A reversible addition‐fragmentation chain transfer (RAFT) agent was directly anchored onto superparamagnetic Fe₃O₄ nanoparticles (SPNPs) in a simple procedure using a ligand exchange reaction of 2‐[(dodecylsulfanylcarbonylthiolsulfanyl) propionic acid] (DCPA) with oleic acid initially present on the surface of Fe₃O₄ nanoparticles. The DCPA‐modified SPNPs were then used for the surface‐mediated RAFT polymerization of di(ethylene glycol) ethyl ether acrylate and (oligoethylene glycol) methyl ether acrylate to fabricate structurally well‐defined hybrid SPNPs with temperature‐responsive poly[di(ethylene glycol) ethyl ether acrylate‐co‐(oligoethylene glycol) methyl ether acrylate] shell and magnetic Fe₃O₄ core. Evidence of a well‐controlled surface‐mediated RAFT polymerization was gained from a linear increase of number‐average molecular weight with overall monomer conversions and relatively narrow polydispersity indices of the copolymers grown from the SPNPs. The resultant hybrid nanoparticles exhibited superparamagnetic property with a saturation magnetization of 55.1–19.4 emu/g and showed a temperature‐responsive phenomenon as the temperature changed between 25 and 40 ^°C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3420–3428     

The glass transition in athermal poly(α‐methyl styrene)/oligomer blends

The glass transition behavior in athermal blends of poly(α‐methyl styrene) (PaMS) and its hexamer is investigated using differential scanning calorimetry (DSC). The results, along with previous data on similar blends of PaMS/pentamer, are analyzed in the context of the Lodge–McLeish self‐concentration model. A methodology is described to partition the calorimetric transition to obtain effective T_gs for each component of the blend. The dependences of these effective T_gs on overall blend composition are described by the Lodge–McLeish model, although the self‐concentration effect is less than expected based on the Kuhn length. The length scales of the cooperatively rearranging regions for the two components in the blends are also calculated adapting Donth's fluctuation model to the partitioned DSC transitions and are found to be similar for the two components and show a slight decrease at intermediate concentrations. The kinetics associated with the glass temperature, T_g, is examined by studying the cooling rate dependence of T_g for the pure components and the blends, as well as by examining the enthalpy overshoots in the heating DSC scans. It is observed that the cooling rate dependence of T_g in PaMS/hexamer blends at intermediate concentrations is similar to that of the hexamer, indicating that the kinetics of the glass transition for blends is dominated by the high mobility oligomeric component. Moreover, compared to the pure materials, the PaMS/hexamer blends exhibit a considerably depressed enthalpy overshoot, presumably resulting from their broader relaxation time distribution. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 418–430, 2008     

Block and star block copolymers by mechanism transformation 9: Preparation and characterization of poly(methyl methacrylate)/poly(1,3‐dioxepane)/polystyrene ABC miktoarm star copolymers by combination of reversible addition–fragmentation chain‐transfer polymerization and cationic ring‐opening polymerization

The miktoarm ABC star copolymer with three different branches, polystyrene (PS), poly(1,3‐dioxepane) (PDOP), and poly(methyl methacrylate) (PMMA), was successfully prepared. PS with two transfer groups, hydroxyl and dithiobenzoate groups [PS‐HECA‐SC(S)Ph], was synthesized by the reaction of a dithiobenzoate group at the end of PS with hydroxyethylene cinnamate (HECA) in tetrahydrofuran solution. Then, the cationic ring‐opening polymerization of 1,3‐dioxepane was initiated by triflic acid in the presence of PS‐HECA‐SC(S)Ph and diblock copolymer, PS‐PDOP, was formed. Finally, the diblock copolymer with the dithiobenzoate group situated between the two blocks was used in the reversible addition–fragmentation transfer (RAFT) process of methyl methacrylate (MMA). The miktoarm ABC star copolymer S(PS)(PDOP)(PMMA) was characterized by ¹H NMR spectroscopy and gel permeation chromatography. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1243–1250, 2003     

Synthesis of polyisoprene–poly(methyl methacrylate) block copolymers via a two‐electron‐transfer mechanism

Supramolecular complexes of alkali metals were used as catalysts in the polymerization of isoprene via a two‐electron‐transfer mechanism. The obtained polyisoprene, having a living end group, was subsequently used to initiate methyl methacrylate polymerization in tetrahydrofuran. Polyisoprene–poly(methyl methacrylate) block copolymers were obtained, and their structure was established with ¹H NMR, gel permeation chromatography, differential scanning calorimetry, and experiments of selective extraction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1086–1092, 2006     

Dependence of silica particle sizes on network chain lengths,silica contents,and catalyst concentrations in in situ‐reinforced polysiloxane elastomers

Poly(dimethylsiloxane) networks were prepared by tetrafunctionally end‐linking hydroxyl‐terminated chains with tetraethoxysilane (TEOS). Molecular composites were then prepared by in situ sol–gel reactions on additional TEOS swelled into the networks, resulting in the formation of reinforcing silica fillers within the host elastomers. The amount of filler generated generally increased linearly with an increase in the TEOS swelling ratio, as expected. The silica particles formed were examined by small‐angle X‐ray scattering. Of particular interest were the relationships between particle size and molecular weight M_c of the network chains (mesh sizes), amount of filler introduced, and catalyst concentration. Particle sizes were smallest for the smallest values of M_c, possibly demonstrating constraining effects from the very short network chains. At fixed M_c and filler concentrations, higher catalyst concentrations gave larger particles. Increase in filler concentration generally had little effect on particle size at low and high loadings, but markedly increased sizes at intermediate levels (10–20 wt %), presumably caused by coalescence of the scattering entities into considerably larger aggregates. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1421–1427, 1999