Blends of a thermotropic liquid‐crystalline polymer and a poly(butylene terephthalate)/organoclay nanocomposite

Blends were synthesized via the melt blending of a thermotropic liquid‐crystalline polymer (TLCP) and a poly(butylene terephthalate) (PBT) hybrid containing 2 wt % organoclay. A TLCP was also synthesized with side groups based on a nematic liquid‐crystalline phase. The blends of TLCPs with PBT hybrids were melt‐spun with different concentrations of the liquid‐crystalline polymer and different draw ratios (DRs) to produce monofilaments. Regardless of the TLCP concentration in the hybrids, transmission electron microscopy photographs proved that the clay layers of the organoclay were intercalated and partially exfoliated in the PBT matrix. At DR = 1, the maximum enhancement in the ultimate tensile strength was observed for blends containing 8% TLCP, and the tensile strength decreased with further increases in the TLCP concentration. The initial modulus monotonically increased with increasing TLCP concentration. When DR increased from 1 to 44, the increased stretching caused the tensile property to decrease significantly, debonding to occur, and voids to form. These trends with increasing DR were observed in all the systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3667–3676, 2004     

Reversible melting in poly(butylene terephthalate)

Crystallized samples of poly(butylene terephthalate) (PBT), examined in the melting region by means of temperature modulated differential scanning calorimetry (TMDSC), show reversible fusion. The analysis of the complex heat capacity reveals that the fusion of poor crystallites can follow temperature modulation more easily than perfect crystals, in agreement with the findings recently reported in the literature, and that the amount of reversible melting decreases with increasing the modulation frequency.     

Studies on thermotropic liquid crystalline elastomers. I. Synthesis and properties of poly (amide-ester) elastomers

Three series of novel poly(amide-ester) (PAE) elastomers were prepared by direct poly-condensation from terephthalic acid (TPA), polyols (M_n = 1000 or 2000), and various diamines. The structures and thermal properties of the synthesized PAEs were examined by FTIR spectroscopy, wide angle X-ray diffraction (WAXD), differential scanning calo-rimetry (DSC), thermal optical polarized microscopy, thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA). The effects of kinds and amount of diamines and the molecular weight of polyols on the thermal properties of PAEs were studied. By introducing long flexible spacers (PE-1000 or PE-2000) into the polymer main chain, all polymers showed two-phase morphology under the thermal optical microscopic observation. It was interesting that most of the synthesized polymers exhibited only one melting transition corresponding to the soft segments. The melting transition of hard segments could not be detected due to decomposition of the soft segments. However, a thermotropic liquid crystalline PAE (TLCPAE) prepared from methylhydroquinone and 2-chloro-5-methyl-phenylenediamine with PE-1000 could be obtained by lowering the melting transition temperature of the hard segment. © 1995 John Wiley & Sons, Inc.     

Novel luminescent liquid crystalline polyazomethines. Synthesis and study of thermotropic and photoluminescent properties

Novel semiflexible polyazomethines containing chromophoric units into azomethine mesogenic core have been synthesised by condensation of a flexible dialdehyde with mesogenic diamines containing fluorene, antraquinone, pyrimidine, azobenzene and benzophenone. The thermotropic behaviour of the resulting polyazomethines was assessed by differential scanning calorimetry, polarised light microscopy and investigations of the miscibility relations. While the pure polyazomethines showed a birefringent viscous texture difficult to be ascribed, by mixing with a liquid crystal dimer, clear Schlieren or marbled textures were observed, indicating a nematic mesophase. The polymers exhibited violet, blue or yellow light emission.     

Studies on thermotropic liquid crystalline polymers. XIV. Synthesis and properties of liquid crystalline poly(imide-ester)s by the direct polycondensation

A series of semi-aromatic poly(imide-ester)s were prepared by the direct polycondensation of N-(4-carboxyphenyl) trimellitimide or N-(3-carboxyphenyl) trimellitimide with various pyromellitic diimide diols containing methylene spacer = 2–6, respectively. The effect of the amount of LiCl, pyridine, and the kinds of condensation agents on the direct polycondensation were studied. The structures and thermal properties of the synthesized poly(imide-ester)s were examined by FTIR spectrum, wide-angle x-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermal optical polarized microscopic observation, and thermogravimetric analysis (TGA). It is found that P1 series [derived from N-(4-carboxyphenyl) trimellitimide] with even number methylene spacer (n = 4, 6) exhibit smectic mesophase, but P2 series [derived from N-(3-carboxyphenyl) trimellitimide] do not show LC phase. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of thermotropic liquid crystalline poly(ester imide)s

Two closely series of poly(ester imide)s had been synthesized by solution polycondensation of p‐phenylenebis(trimellitate) dianhydride with aliphatic diamines. The differential scanning calorimetry (DSC) traces of the most poly(ester imide)s exhibited two endotherms representing the solid state to anisotropic phase transition (T_m1) and the anisotropic to isotropic melt transition (T_m2), respectively. Observation under polarizing microscope and wide‐angle X‐ray diffraction (WAXD) measurements suggested that the anisotropic phase formed above the melting points (T_m1) had a smectic character. The thermogravimetric analyses (TGA) revealed that the thermal stabilities of the poly(ester imide)s were up to 350°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 211–218, 1999     

Studies on thermotropic liquid crystalline polymers. XV. Synthesis and properties of liquid crystalline copoly(imide-ester)s

Three series of the thermotropic liquid crystalline copoly(imide-ester)s were prepared by direct polycondensation. The first two series of the copoly(imide-ester)s were synthesized from N-(4-carboxyphenyl) trimellitimide with N,N-di(hydroxypropyl) pyromellitic diimide and various aromatic diols. The third series of copoly(imide-ester)s were prepared by N-(4-carboxyphenyl) trimellitimide with various imide-diols (methylene spacer = 2–6) and phenyl hydroquinone. The structures and thermal properties of the synthesized poly(imide-ester)s were examined by FTIR spectrum, wide-angle x-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermal optical polarized microscope, and thermogravimetric analysis (TGA). The effects of the structures of the aromatic diols on the thermal properties of the resulting copoly(imide-ester)s were investigated. It was found that most of the copoly(imide-ester)s possessed excellent mesophase stabilities and thermostabilities. The mesophase stabilities of poly(imide-ester)s decreased with the increase of the size of lateral group, and the mesophase range increased with the increase of the amount of PhHQ. No significant odd-even effects were observed between the methylene spacer lengths and transition temperatures. © 1996 John Wiley & Sons, Inc.     

A novel phosphorus‐containing thermotropic liquid crystalline poly(ester‐imide) with high flame retardancy

A novel phosphorus–nitrogen thermotropic liquid crystalline poly(ester‐imide) (PN‐TLCP) derived from p‐acetoxybenzoic acid (ABA), terephthalic acid (TPA), acetylated 2‐(6‐oxide‐6H‐dibenz<c,e><1,2>oxa phosphorin‐ 6‐yl)‐1,4‐dihydroxy phenylene (DOPO‐AHQ) and N,N'‐hexane‐1,6‐diylbis(trimellitimide) was prepared by melt transesterification. The chemical structure, the mesophase behavior, and the thermal properties of the copolymer were investigated with Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR), elemental analysis, wide‐angle X‐ray diffraction (WAXD), hot‐stage polarized light microscopy (PLM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). PN‐TLCP exhibited a nematic mesophase with a strong birefringence at a low and broad mesomorphic temperature ranging from 220 to 350°C, an initial flow temperature as low as about 190°C and a glass transition temperature of about 160°C. PN‐TLCP has also good thermal stability, high char residues and excellent flame retardancy (limiting oxygen index, LOI = 71 and UL‐94 V‐0 rating). Copyright © 2009 John Wiley & Sons, Ltd.     

X‐ray studies on the double melting behavior of poly(butylene terephthalate)

The double melting behavior of poly(butylene terephthalate) (PBT) was studied with differential scanning calorimetry (DSC) and wide‐angle X‐ray analysis. DSC melting curves of melt‐crystallized PBT samples, which we prepared by cooling from the melt (250 °C) at various cooling rates, showed two endothermic peaks and an exothermic peak located between these melting peaks. The cooling rate effect on these peaks was investigated. The melt‐crystallized PBT sample cooled at 24 K min^?1 was heated at a rate of 1 K min^?1, and its diffraction patterns were obtained successively at a rate of one pattern per minute with an X‐ray measurement system equipped with a position‐sensitive proportional counter. The diffraction pattern did not change in the melting process, except for the change in its peak height. This suggests that the double melting behavior does not originate from a change in the crystal structure. The temperature dependence of the diffraction intensity was obtained from the diffraction patterns. With increasing temperature, the intensity decreased gradually in the low‐temperature region and then increased distinctly before a steep decrease due to the final melting. In other words, the temperature‐dependence curve of the diffraction intensity showed a peak that is interpreted as proof of the recrystallization in the melting process. The peak temperature was 216 °C. The temperature‐dependence curve of the enthalpy change obtained by the integration of the DSC curve almost coincided with that of the diffraction intensity. The double melting behavior in the heating process of PBT is concluded to originate from the increase of crystallinity, that is, recrystallization. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2005–2015, 2001     

Crystal structure and conformational disorder of poly(hexamethylene terephthalate)

Packing polymorphism and conformational disorder of poly(hexamethylene terephthalate) were analyzed by x-ray diffraction technique. The measurements were performed in the temperature range from 20 to 135°C. At high temperature, several unassignable reflections were found to disappear, and all reflections were satisfactorily indexed by single-chain unit cell. The crystal structures of β form (135°C) and β form (20°C) were similarly triclinic. The β′ unit cell assumed the double b-axis dimension, and the centrosymmetric conformations of the two chains adjacent along the b-axis differed in the orientation of the phenylene rings. At the elevated temperature (β form), the chains were indistinguishable by x-ray diffraction owing to the ring-flipping motion. The β and β′ structures were different in the local conformational disorder around the terephthaloyl groups. Conformational polymorphism of homologous poly(oligomethylene terephthalate)s was considered to originate from the difference in bulkiness of the aromatic and aliphatic residues. © 1996 John Wiley & Sons, Inc.     

Calorimetric study of blends of poly(butylene terephthalate) and liquid crystalline copolyester

A calorimetric study of blends of poly(ethylene terephthalate-co-p-oxybenzoate), PET/PHB, with poly(butylene terephthalate), PBT has been carried out in the form of as-spun and drawn fibres. DSC melting and crystallization results show that PBT is compatible with LCP and the crystallization of PBT decreases by the addition of LCP in the matrix. The crystallization behaviour of blend fibres is investigated as a function of temperature of crystallization. A detailed analysis of the crystallization course has been made utilizing the Avrami expression. The isothermal calorimetric measurements provide evidence of decrease of rate of crystallization of PBT on addition of the liquid crystalline component up to about 50% by weight. The values of the Avrami exponents change in the temperature range from 200° to 215°C. Dimensionality changes in crystallization could be due to LCP mesophase-transition.     

Studies on the thermotropic liquid crystalline polymer. VII. Synthesis and properties of photocrosslinkable poly(ether-ester) containing cinnamic group

A series of semi-aromatic poly(ether-ester)s containing cinnamic group was prepared from 4,4′-diacrylic acid-α,ω-phenoxyalkanes with diols in the presence of diphenylchlorophosphate (DPCP) and pyridine as a catalyst and solvent. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). All of the poly(ether-ester)s, except P3 , show nematic or smectic thermotropic liquid crystalline behaviour under optical polarizing microscopic observation. These polymers can undergo photocrosslinking reaction upon heating, as examined by IR, solubility, and DSC analysis. © 1993 John Wiley & Sons, Inc.     

Flow-induced structure in a thermotropic liquid crystalline polymer as studied by SANS

Small-angle neutron scattering is utilized to determine the flow induced alignment of a model thermotropic liquid crystalline polymer (LCP) as a function of shear rate and temperature. The results demonstrate that the flow-induced structures in thermotropic liquid crystalline polymers have similarities and differences to those in lyotropic liquid crystalline polymer solutions. The shear rate dependence of the alignment shows that the flow-induced alignment correlates very well to the viscosity behavior of the LCP in the shear thinning regime, while temperature variation results in a change in the extent of alignment within the nematic phase. Relaxation results also demonstrate that the flow-induced alignment remains essentially unchanged for up to an hour after the shear field has been removed. Last, there exists a regime at low shear rate and low temperature where alignment of the LCP molecule perpendicular to the applied shear flow is stable. These results provide important experimental evidence of the molecular level changes that occur in a thermotropic liquid crystalline polymer during flow, which can be utilized to develop theoretical models and more efficiently process thermotropic polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 3017–3023, 1998     

Influence of copolymer composition of polyestercarbonate on miscibility with poly(butylene terephthalate)

Blends of poly(butylene terephthalate) (PBT) and polyestercarbonate (PEC), copolyesters consisting of polycarbonate (PC) and polyarylate (PAr), have been studied by thermal analysis to determine miscibility. The PBT blends with PAr and PEC containing 30 wt % of carbonate unit or less appeared to be miscible, and the tendency for stable single‐phase was observed to decrease as the content of carbonate unit in PEC copolymer increased. As determined with the crystalline phase behavior, the miscibility of PEC with PBT appeared to have a maximum around 10 ∼ 30 wt % of carbonate content in PEC copolymer, and this result was attributed to the internal repulsion effect between ester and carbonate repeating units in PEC copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 803–811, 2000     

Calorimetric study of blends of poly(butylene terephthalate) and a liquid crystalline polyester

The thermal properties of solution-prepared blends of poly(butylene terephthalate) (PBT) and liquid crystalline poly(biphenyl-4,4′-ylene sebacate) (PB8) have been studied by differential scanning calorimetry (DSC). The smectic-to-isotropic (s → i) transition of the mesomorphic component is observed at temperatures slightly increasing with the PB8 content, in the 270–280°C range; on cooling, the mesophase formation (i → s transition) takes place at temperatures that decrease markedly with decreasing PB8 content. The temperatures of the crystal-to-smectic and smectic-to-crystal transitions of PB8 are almost invariant with blend composition. The melting and crystallization temperatures of the PBT phase decrease on increasing the content of the liquid crystalline component. These results, together with those of isothermal calorimetry of both the crystallization of the PBT component and the mesophase formation of the PB8 component of the blends, indicate that the two polymers are not immiscible in the isotropic state. In this latter state, however, the two polyesters undergo transesterification, which can be followed through changes in the DSC scans. The effect of the thermal history on the properties of the blends has been studied with particular attention. Both the dynamic and the isothermal calorimetric measurements provide evidence of an increase of the degree of crystallinity of PBT on addition of the liquid crystalline component up to about 35–50% by weight.     

High‐pressure DTA of poly(butylene terephthalate), poly(hexamethylene terephthalate), and poly(ethylene terephthalate)

Pressure effect on the melting behavior of poly(butylene terephthalate) (PBT) and poly(hexamethylene terephthalate) (PHT) was studied by high‐pressure DTA (HP‐DTA) up to 320 and 530 MPa, respectively. Cooling rate dependence on the DSC melting curves of the samples cooled from the melt was shown at atmospheric pressure. Stable and metastable samples were prepared by cooling from the melt at low and normal cooling rates, respectively. DTA melting curves for the stable samples showed a single peak, and the peak profile did not change up to high pressure. Phase diagrams for PBT and PHT were newly determined. Fitting curves of melting temperature (T_m) versus pressure expressed by quadratic equation were obtained. Pressure coefficients of T_m at atmospheric pressure, dT_m/dp, of PBT and PHT were 37 and 33 K/100 MPa, respectively. HP‐DTA curves of the metastable PBT showed double melting peaks up to about 70 MPa. In contrast, PHT showed them over the whole pressure region. HP‐DTA of stable poly(ethylene terephthalate) (PET) was also carried out up to 200 MPa, and the phase diagram for PET was determined. dT_m/dp for PET was 49 K/100 MPa. dT_m/dp increased linearly with reciprocal number of ethylene unit. The decrease of dT_m/dp for poly(alkylene terephthalate) with increasing a segmental fraction of an alkyl group in a whole molecule is explained by the increase of entropy of fusion. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 262–272, 2000     

Fire retardant synergism between melamine and triphenyl phosphate in poly(butylene terephthalate)

The fire retardant efficiency of melamine (MA) and triphenyl phosphate (TPP) in poly(butylene terephthalate) (PBT) was studied by the limiting oxygen index (LOI) and the UL94 test. On adding 10 wt. % MA and 20 wt. % TPP, LOI increased from 20.9 to 26.6 and the UL94 V-0 rating was achieved. SEM and DSC analyses show that the fire retardants are compatible with PBT and facilitate crystallization of PBT. The occurrence of an interaction between MA + TPP and PBT was elucidated by TGA, dynamic FTIR, and pyrolysis/GC/MS. MA + TPP changes the degradation path of PBT and modifies the compositions of the gas and condensed-phase products.     

Studies on the thermotropic liquid crystalline polycarbonates. II. Synthesis and properties of fully aromatic liquid crystalline polycarbonates

Four series of fully aromatic polycarbonates were prepared by using melt polycondensation from various novel phenylene diphenyl dicarbonates: 1,4-phenylenc diphenyl dicarbonate, 1,3-phenylene diphenyl dicarbonate, methyl-1,4-phenylene diphenyl dicarbonate, and chloro-1,4-phenylene diphenyl dicarbonate with various diols—4,4′-biphenyl diol, hydroquinone, 2,7-naphthalene diol and 1,5-naphthalene diol, respectively. The thermotropic liquid crystalline properties of synthesized polycarbonates were investigated by: (1) examination of the melt birefringence and stir opalescence by a polarizing microscope equipped with a heating stage, (2) characterization by a differential scanning calorimeter (DSC), and (3) analysis of the wide angle x-ray diffraction. It was found that the 1,3-phenylene unit is compensated for the nonlinearity of the carbonate group, and polycarbonates which contain this bent shape unit showed excellent wide mesophase transition in this study. © 1993 John Wiley & Sons, Inc.