Preparation and characterization of macroporous poly(N‐isopropylacrylamide) hydrogels for the controlled release of proteins

Macroporous, temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPAAm) hydrogels were synthesized with poly(ethylene glycol)s (PEGs; molecular weight = 2000–6000) as the pore‐forming agents. The influence of the molecular weight and PEG content on the responsive kinetics of these macroporous hydrogels was investigated. The PEG‐modified PNIPAAm hydrogels were characterized by the swelling ratio, deswelling–reswelling kinetics, Fourier transform infrared, and differential scanning calorimetry. The morphology of these hydrogels was analyzed with scanning electron microscopy. The prepared macroporous hydrogels exhibited some unique properties in comparison with the gels with low molecular weight PEGs (molecular weight < 2000) as the pore‐forming agents. In addition, a preliminary study on the controlled release of bovine serum albumin from these macroporous hydrogels was carried out. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 152–159, 2003     

Synthesis and characterization of thermoresponsive poly(ethylene glycol)‐based hydrogels and their magnetic nanocomposites

Temperature‐responsive hydrogels are one of the most widely studied types of stimuli‐responsive hydrogel systems. Their ability to transition between their swollen and collapsed states makes them attractive for controlled drug delivery, microfluidic devices, and biosensor applications. Recent work has shown that poly(ethylene glycol) (PEG) methacrylate polymers are temperature‐responsive and exhibit a wide range of lower critical solution temperatures based on the length of ethylene glycol units in the macromer chain. The addition of iron oxide nanoparticles into the hydrogel matrix can provide the ability to remotely heat the gels upon exposure to an alternating magnetic field (AMF). In this work, diethylene glycol (n = 2) methyl ether methacrylate and PEG (n = 4.5) methyl ether methacrylate copolymers were polymerized into hydrogels with 5 mol % PEG 600 (n = 13.6) dimethacrylate as the crosslinker along with 5 wt % iron oxide nanoparticles. Volumetric swelling studies were completed from 22 to 80 °C and confirmed the temperature‐responsive nature of the hydrogel systems. The ability of the gels to collapse in response to rapid temperature changes when exposed to an AMF was demonstrated showing their potential use in biomedical applications such as controlled drug delivery and hyperthermia therapy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3229–3235, 2010     

A visible light responsive azobenzene‐functionalized polymer: Synthesis,self‐assembly,and photoresponsive properties

A novel visible light responsive random copolymer consisting of hydrophobic azobenzene‐containing acrylate units and hydrophilic acrylic acid units has been prepared. The azobenzene molecule bearing methoxy groups at all four ortho positions is readily synthesized by one‐step conversion of diazotization. The as‐prepared polymer can self‐assemble into nanoparticles in water due to its amphiphilic nature. The tetra‐o‐methoxy‐substituted azobenzene‐functionalized polymer can exhibit the trans‐to‐cis photoswitching under the irradiation with green light of 520 nm and the cis‐to‐trans photoswitching under the irradiation with blue light of 420 nm in both solution and aggregate state. The morphologies of the self‐assembled nanoparticles are revealed by TEM and DLS. The controlled release of loaded molecules from the nanoparticles can be realized by adjusting pH value since the copolymer possesses pH responsive acrylic acid groups. The fluorescence of loaded Nile Red in the nanoparticles can be tuned upon the visible light irradiation. The reversible photoswitching of the azobenzene‐functionalized polymer under visible light may endow the polymer with wide applications without using ultraviolet light at all. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2768–2775     

Physical properties of glycosaminoglycan hydrogels

The chemical composition of glycosaminoglycan (GAG) hydrogels was found to have a profound effect on the physical properties of gels. Hyaluronan (HA) and chondroitin sulfate (CS) were each modified with adipic dihydrazide (ADH) with carbodiimide chemistry. The resulting polymer was crosslinked with various concentrations of poly(ethylene glycol) dialdehyde (PEG‐diald) to produce a series of hydrogels. The physical properties of these GAG hydrogels varied in a concentration‐dependent fashion. Maximal crosslinking was observed at a theoretical crosslinking of 50% for the HA‐ADH‐PEG‐diald hydrogels and 75% for the CS‐ADH‐PEG‐diald hydrogels. Adding PEG‐diald beyond the optimum for crosslinking prolonged the in vitro enzymatic degradation time of the hydrogels. The swelling of the crosslinked GAG hydrogels was correlated with the amount of PEG‐diald used rather than with the crosslinking density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4344–4356, 2004     

A pH‐sensitive,strong double‐network hydrogel: Poly(ethylene glycol) methyl ether methacrylates–poly(acrylic acid)

We here describe new double network (DN) hydrogels with excellent mechanical strength and high sensitivity to pH changes. The first polymer network has a bottle brush structure and is formed from oligo‐monomers of poly(ethylene glycol) methyl ether methacrylate (PEGMA). Poly(acrylic acid) (PAA) is used as the second network. This double network features strong intermolecular interactions between the neutral poly(ethylene glycol) (PEG) side chains of PPEGMA and the non‐ionized carboxylic acid groups of the PAA second network. When immersed in solutions with a pH below ～4 the DN hydrogels have a low swelling ratio and are opaque as a result of solvent‐polymer phase separation driven by the formation of dense hydrogen‐bonded clusters. The compression strength (～8 MPa) is at least 14 times higher than the analogous single networks. When immersed in solutions with a pH >4, the hydrogels are transparent and exhibit a high swelling ratio with a compression strength of ～1 MPa. The PEG side chain length can be readily controlled without greatly altering the overall DN topology by choosing PEGMA monomers having different PEG side chain lengths. Longer PEG side branches give higher compression and tensile strengths at pH <4 when hydrogen bonded clusters form. The robust nature of these DN gels over a wide pH range may be useful for applications such as artificial muscles and controlled release devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Soft nanoparticles assembled from linear poly(ethylene glycol) and linear brush polydimethylsiloxane diblock copolymers

A series of novel amphiphilic diblock copolymers composed of hydrophilic linear poly(ethylene glycol) (PEG) and linear brush hydrophobic polydimethylsiloxane (PDMS) were synthesized. Three different molecular weights of monomethyl ether PEG were initially functionalized with 2‐bromoisobutyryl bromide to afford macroinitiators suitable for atom‐transfer radical polymerization. The macroinitiators were characterized by gel permeation chromatography, ¹H and ¹³C nuclear magnetic resonance spectroscopic analysis and matrix‐assisted laser desorption ionization time‐of‐flight mass spectroscopy. The three different molecular weight macroinitiators were then chain extended with monomethacryloxypropyl‐terminated PDMS and photoactive 2‐(methylacyloyloxy)ethyl anthracene‐9‐carboxylate in different molar ratios to afford a series of photoresponsive amphiphilic diblock copolymers with high conversions. Self‐assembly of these linear–linear brush diblock copolymers in N,N‐dimethylformamide afforded nanoparticles with hydrodynamic diameters (d_H) ranging from 41 to 268 nm, as determined by dynamic light scattering analysis. Crosslinking and stabilization of the nanoparticles was achieved via [4+4] photodimerization of the anthracene moieties upon exposure to UV radiation at 365 nm with the reverse reaction studied at a wavelength of 254 nm. Transmission electron microscopy revealed that the self‐assembled nanoparticles and their crosslinked derivatives had spherical morphologies. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1251–1262     

Synthesis of star‐shaped poly(n‐butyl acrylate) oligomers with coumarin end groups and their networks for a UV‐tunable viscoelastic material

Solvent‐free isothermal tuning of viscoelasticity of polymer materials is important for an emerging photochemical molding technology and photoreversible adhesives. In this study we designed a four‐armed star‐shaped poly(butyl acrylate, BA) oligomer having four coumarin end groups. The irradiation of UV at the wavelength of 365 nm (UV₃₆₅) to the viscous poly(BA) oligomer under a solvent‐free condition produced a solid network material along with the progress of dimerization reaction with coumarin end groups. The subsequent irradiation of UV at the wavelength of 254 nm (UV₂₅₄) caused dimer dissociation reaction to attain change in the mixing degree of star and network architectures in the material. Moreover, viscoelasticity of the network material was tunable by repetitive UV₃₆₅ and UV₂₅₄ irradiations. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 9–15     

Photoswitchable Formation of a DNA Interstrand Cross‐Link by a Coumarin‐Modified Nucleotide

A coumarin‐modified pyrimidine nucleoside ( 1 ) has been synthesized using a Cu^I‐catalyzed click reaction and incorporated into oligodeoxynucleotides (ODNs). Interstrand cross‐links are produced upon irradiation of ODNs containing 1 at 350 nm. Cross‐linking occurs through a [2+2] cycloaddition reaction with the opposing thymidine, 2′‐deoxycytidine, or 2′‐deoxyadenosine. A much higher reactivity was observed with dT than dC or dA. Irradiation of the dT‐ 1 and dC‐ 1 cross‐linked products at 254 nm leads to a reversible ring‐opening reaction, while such phenomena were not observed with dA‐ 1 adducts. The reversible reaction is ultrafast and complete within 50–90 s. Consistent photoswitching behavior was observed over 6 cycles of irradiation at 350 nm and 254 nm. To the best of our knowledge, this is the first example of photoswitchable interstrand cross‐linking formation induced by a modified pyrimidine nucleoside.     

Preparation and characteristics of photocrosslinkable hydrophilic polymer having cinnamate moiety

The reaction of copolymer of N,N-dimethylacrylamide (DMAA) and bromoethyl methacrylate with potassium cinnamate produced water-soluble photosensitive polymers. Photosensitive polyDMAA films were irradiated with a 400 W high-pressure mercury lamp (λ > 280 nm) to produce crosslinked polymers, which were swollen in water. The degree of swelling was controlled by the irradiation time and content of cinnamate moieties in copolymers. Higher cinnamoylation and longer irradiation time resulted in higher yield of crosslinked polymers and less swellability. Partial degelation upon irradiation at λ ～ 254 nm was observed. The advantage of gelation via photodimerization over conventional chemical crosslinking methods is discussed in conjunction with biomedical applications. © 1992 John Wiley & Sons, Inc.     

Fabrication,chemical modification,and topographical patterning of reactive gels assembled from azlactone‐functionalized polymers and a diamine

The work reported here demonstrates an approach to the fabrication of chemically reactive and topographically patterned hydrogels using the azlactone‐functionalized polymer poly(2‐vinyl‐4,4'‐dimethylazlactone) (PVDMA) and the hydrophilic diamine Jeffamine®. Gels were initially assembled in DMSO but can be subsequently transferred into aqueous media to form hydrogels. Spectroscopic characterization of assembled gels demonstrated that variation in the stoichiometric ratio of azlactones to amines during gel synthesis permits control over the extent of crosslinking in the gels. Residual azlactones not consumed during crosslinking can be exploited to further functionalize these gels with hydrophobic, hydrophilic, and macromolecular amines that influence the physicochemical properties of these materials in aqueous solvents. The surface and bulk of these gels can be differentially functionalized (i.e., different functional groups on the gel surface relative to the bulk) by taking advantage of different rates of diffusion of macromolecular amines versus small molecule amines into assembled gels. Finally, these azlactone‐functionalized gels can be topographically patterned with microwell arrays using a replica molding technique and chemically modified postfabrication with amine nucleophiles. This reactive approach to the fabrication of topographically patterned and chemically functionalized hydrogels offers a straightforward method for the rapid synthesis of micropatterned scaffolds of interest in a broad range of applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3185–3194     

Synthesis and characterization of novel biodegradable unsaturated poly(ester amide)/poly(ethylene glycol) diacrylate hydrogels

A series of novel biodegradable hydrogels were designed and synthesized from four types of unsaturated poly(ester amide) (UPEA) and poly(ethylene glycol) diacrylate (PEG‐DA) precursors by UV photocrosslinking. These newly synthesized biodegradable UPEA/PEG‐DA hydrogels were characterized by their gel fraction (G_f), equilibrium swelling ratio (Q_eq), compressive modulus, and interior morphology. The effect of the precursor feed ratio (UPEAs to PEG‐DA) on the properties of the hydrogels was also studied. The incorporation of UPEA polymers into the PEG‐DA hydrogels increased their hydrophobicity, crosslinking density (denser network), and mechanical strength (higher compressive modulus) but reduced Q_eq. When different types of UPEA precursors were coupled with PEG‐DA at the same feed ratio (20 wt %), the resulting hydrogels had similar Q_eq values and porous three‐dimensional interior morphologies but different G_f and compressive modulus values. These differences in the hydrogel properties were correlated to the chemical structures of the UPEA precursors; that is, the different locations of the >C?C< double bonds in individual UPEA segments resulted in their different reactivities toward PEG‐DA to form hydrogels. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3932–3944, 2005     

Abilities of 1‐(9‐anthrylmethyloxy)‐2‐pyridone and related compounds to initiate radical and cationic photopolymerizations

This study explored the abilities of 1‐(9‐anthrylmethyloxy)‐2‐pyridone and related compounds, which absorb long‐wavelength light (>350 nm), to photochemically initiate radical and cationic polymerizations. It was found that the irradiation of the title compounds initiates the radical polymerization of styrene whereas the cationic polymerization of oxetane proceeds in the presence of these photoinitiators to a negligible extent. The behavior of 9‐anthrylmethyloxyl and amidyl radicals in the photopolymerization process of styrene was discussed based on ¹H NMR, UV, and fluorescence spectral data. In addition, the photoinitiation ability of the anthrylmethyloxyl end group was also investigated by using its model compound. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2859–2865, 2004     

Positron annihilation studies on radiation‐crosslinked poly(N‐isopropylacrylamide) hydrogels

The temperature‐sensitive poly(N‐isopropylacrylamide) hydrogels, prepared by γ and electron‐beam (EB) irradiation, were studied using positron annihilation lifetime spectroscopy (PALS). The effect of water content in the hydrogel on the ortho‐positronium (o‐Ps) lifetime and intensity was investigated. The observed positronium lifetime suggests microstructural differences between γ‐ and EB‐synthesized hydrogels. The distribution in positronium lifetime indicates nonhomogeneity in the distribution of free‐volume holes in EB‐synthesized hydrogels. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3462–3466, 2000     

Investigation of interpolymer complexation in swollen polyelectolyte networks using solid‐state NMR spectroscopy

Copolymer networks of poly(methacrylic acid) (PMAA) and poly(ethylene glycol) (PEG) exhibit large changes in their swelling behavior over a narrow pH range due to the reversible formation/dissociation of interpolymer complexes between the polymer chains. Intepolymer complexation occurs in copolymer gels of PMAA and PEG due to hydrogen bonding between protonated acid groups and the ether groups of the PEG. Because of their nature, these gels have been identified for use as delivery vehicles for macromolecular drugs. In this work, solid‐state, nuclear magnetic resonance nuclear Overhauser enhancement (NOE) experiments were performed to detect the molecular level complexation between PMAA and deuterated PEG in copolymer blends and crosslinked networks. For gels swollen in acidic media at room temperature or at 37 °C, strong enhancements were detected in the ¹³C resonance of the PEG carbons. The NOE was generated due to energy transfer between the rapidly rotating methyl group protons and the deuterated PEG carbons. The presence of the NOE was indicative of close packing of the polymer chains and was evidence of the presence of the intermacromolecular complexes. In basic solutions, no NOE was detected in the PEG, as the complexes were dissociated and the chains were separated in space. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2823–2831, 2000     

Evaluation of piezoelectric PVDF polymers for use in space environments. III. Comparison of the effects of vacuum UV and gamma radiation

Films of piezoelectric PVDF and P(VDF‐TrFE) were exposed to vacuum UV (115–300 nm VUV) and γ‐radiation to investigate how these two forms of radiation affect the chemical, morphological, and piezoelectric properties of the polymers. The extent of crosslinking was almost identical in both polymers after γ‐irradiation, but surprisingly, was significantly higher for the TrFE copolymer after VUV‐irradiation. Changes in the melting behavior were also more significant in the TrFE copolymer after VUV‐irradiation due to both surface and bulk crosslinking, compared with only surface crosslinking for the PVDF films. The piezoelectric properties (measured using d₃₃ piezoelectric coefficients and D‐E hysteresis loops) were unchanged in the PVDF homopolymer, while the TrFE copolymer exhibited more narrow D‐E loops after exposure to either γ‐ or VUV‐radiation. The more severe damage to the TrFE copolymer in comparison with the PVDF homopolymer after VUV‐irradiation is explained by different energy deposition characteristics. The short wavelength, highly energetic photons are undoubtedly absorbed in the surface layers of both polymers, and we propose that while the longer wavelength components of the VUV‐radiation are absorbed by the bulk of the TrFE copolymer causing crosslinking, they are transmitted harmlessly in the PVDF homopolymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3253–3264, 2006     

The incorporation of carboxylate groups into temperature‐responsive poly(N‐isopropylacrylamide)‐based hydrogels promotes rapid gel shrinking

Aqueous gel deswelling rates for copolymer hydrogels comprising N‐isopropylacrylamide (IPAAm) and 2‐carboxyisopropylacrylamide (CIPAAm) in response to increasing temperatures were investigated. Compared with pure IPAAm‐based gels, IPAAm–CIPAAm gels shrink very rapidly in response to small temperature increases across their lower critical solution temperature (their volume is reduced by five‐sixths within 60 s). Shrinking rates for these hydrogels increase with increasing CIPAAm content. In contrast, structurally analogous IPAAm–acrylic acid (AAc) copolymer gels lose their temperature sensitivity with the introduction of only a few mole percent of AAc. Additionally, deswelling rates of IPAAm–AAc gels decrease with increasing AAc content. These results indicate that IPAAm–CIPAAm copolymer gels behave distinctly from IPAAm–AAc systems even if both comonomers, CIPAAm and AAc, possess carboxylic acid groups. Thus, we propose that the sensitive deswelling behavior for IPAAm–CIPAAm gels results from strong hydrophobic chain aggregation maintained between network polymer chains due to the similar chemical structures of CIPAAm and IPAAm. This structural homology facilitates aggregation of chain isopropylamide groups for both IPAAm and CIPAAm sequences with increasing temperature. The incorporation of AAc, however, shows no structural homology to IPAAm, inhibiting chain aggregation and limiting collapse. A functionalized temperature‐sensitive poly(N‐isopropylacrylamide) hydrogel containing carboxylic acid groups is possible with CIPAAm, producing rapid and large volume changes in response to smaller temperature changes. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 335–342, 2001     

Swelling behavior and network structure of hydrogels synthesized using controlled UV‐initiated free radical polymerization

N‐vinyl‐2‐pyrrolidone (VP) and 2‐hydroxyethyl methacrylate (HEMA) copolymeric gels have been synthesized using UV‐initiated photopolymerization to understand their characteristic behavior for development as a bioengineering material, specifically for tissue expansion. The properties of the gels have been investigated by systematic variation of the monomer feed composition and initiator and crosslinker concentrations as well as UV irradiation intensity, which was controlled by various photomasks. The swelling kinetics and network characteristics for the various hydrogels were investigated through the observation of gel swelling behavior in saline solutions and compression modulus determination of the fully swollen hydrogels. The equilibrium swelling ratio (q_e) of the gels increased as expected with increasing VP content and decreasing crosslinker concentration. However, it was found that as the amount of initiator or UV intensity increased, unexpectedly q_e also increased, which indicates a network structure with decreasing effective crosslink density (ν_e) (or increasing average molecular weight between crosslinks (M_c)). Based on this anomalous swelling behavior and thermal analysis of the gels, a molecular structure is proposed consisting of increasing number of dangling chain ends within the polymer network. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1450–1462, 2008     

Synthesis and properties of biodegradable copolymers based on 4,4′‐(adipoyldioxy)dicinnamic acid, 1,6‐hexanediol,and poly(ethylene glycol)s

4,4′‐(Adipoyldioxy)dicinnamic acid (CAC) was synthesized by a condensation of adipoyl chloride and 4‐hydroxycinnamic acid. The CAC6 copolymers were prepared by a high‐temperature solution polycondensation of a diacyl chloride of CAC, 1,6‐hexanediol (6), and poly(ethylene glycol) (PEG) in which the molecular weights of PEG are 1000, 2000, and 8300. Differential scanning calorimetric curves of the copolymers exhibited a glass‐transition temperature because of PEG moiety and two melting endotherms (T_m's); the one at the higher T_m was due to CAC6 moiety, and the other at the lower T_m was due to PEG moiety, suggesting that these copolymers are the block type. The incorporation of the PEG component decreased the tensile strength and initial modulus, but increased the elongation extremely. The enzymatic degradation was performed in phosphate buffer solution (pH 7.2) with Ps. cepacia lipase at 37 °C. The degradation rate of the copolymers increased significantly with an increasing content of PEG, which was correlated to the water absorption of the copolymers. All copolymers could undergo photocuring by ultraviolet (UV) light irradiation (λ > 280 nm) at ambient temperature, as examined by UV spectroscopy and solubility. The CAC6/E2000(50/50) film photocured for 3 min exhibited a good elastic property with a maximum tensile strength of 3.7 MPa and maximum elongation of 640%. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2930–2938, 2003     

Amphiphilic Metallopolymers for Photoswitchable Supramolecular Hydrogels

A series of amphiphilic metallopolymers is described that features zinc(II) bis‐terpyridine coordination nodes as well as a backbone with hydrophobic azoaryl moieties and hydrophilic phenylene‐ethynylene units decorated with PEG brushes. Using such metallopolymers at very low concentration, stable, photo‐responsive and self‐healing hydrogels are obtained. UV irradiation of the gel allows modulation of the degree of hydrophobic π‐π interactions between photoisomerizable azoaryl units and a polarity switch that overall induces a fast gel‐to‐sol transition. Finally, the material phase can be readily and fully restored to the thermodynamically stable state either thermally or photochemically by using visible light. The presented strategy can be further generalized towards modular supramolecular metallopolymers for injectable gels in drug delivery and bio‐engineering applications.     

Preparation and properties of chitosan‐poly(N‐isopropylacrylamide) semi‐IPN hydrogels

Chitosan (CS), CS‐poly(N‐isopropylacrylamide)(PNIPAM) and their dyed (pyrene) hydrogels were prepared using glutaraldehyde (Glu) as a crosslinker. The gelation rate, swelling behaviors in ethanol/water mixtures, electricity‐induced contraction and thermoresponse of the gels were investigated using fluorescence probe technique. Results showed that CS/Glu, and PNIPAM‐containing CS/Glu gels exhibited similar properties in all aspects examined, except that the transparence of the CS‐PNIPAM/Glu gel is very dependent upon the temperature. The CS‐PNIPAM/Glu gel is transparent below 30°C, whereas opaque above 32°C. It is expected that this observation may be useful for the design and preparation of new kinds of hydrogel devices. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 474–481, 2000