Grafting of amphiphilic block copolymers on lignocellulosic materials via SI‐AGET‐ATRP

Functionalizing biosourced materials is a major topic in the field of materials science. In particular, grafting polymerization techniques have been employed to change the surface properties of various substrates. Here, we report on the grafting of amphiphilic block copolymers in lignocellulosic materials using surface‐initiated activators generated by electron transfer atomic transfer radical polymerization (SI‐AGET‐ATRP). With this modification, it is possible to combine the interesting properties (anisotropy and high mechanical stability) of lightweight lignocellulosic materials, such as wood, with the special properties of the grafted block copolymers. Hydroxyl groups on wood cell wall biopolymers were used for the chemical bonding of an alkyl bromide as the initiator for AGET‐SI‐ATRP of a highly hydrophilic monomer ([2‐(methacryloyloxy)ethyl]trimethylammonium chloride) and a highly hydrophobic fluorinated monomer (2,2,3,3,4,4,5,5‐octafluoropentyl methacrylate). The successful grafting of homopolymers and block copolymers onto the wood structure was confirmed through Fourier transform infrared and Raman spectroscopy. The functionalization with the two homopolymers yielded lignocellulosic materials with opposite wettabilities, whereas by the adjustment of the ratio between the two copolymer blocks, it was possible to tune the wettability between these two extremes. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 885–897     

Preparation of poly(methyl acrylate‐co‐itaconic anhydride)/SiO2 hybrid materials via the sol–gel process—The effect of the coupling agent,inorganic content,and nature of the catalyst

Transparent poly(methyl acrylate‐co‐itaconic anhydride)/SiO₂ hybrid materials were prepared from methyl acrylate‐itaconic anhydride copolymer and tetraethoxysilane (TEOS) with the coupling agent (3‐aminopropyl)triethoxysilane (APTES) via a sol–gel process. The covalent bonds between the organic and inorganic phases were introduced by the in situ aminolysis of the itaconic anhydride units with APTES forming a copolymer bearing a triethoxysilyl group. These groups subsequently were hydrolyzed with TEOS and allowed to form a network. These reactions were monitored by Fourier transform infrared analysis. The amount of APTES had a dramatic influence on the gel time and sol fraction. The effect of APTES, the inorganic content, and the nature of the catalyst on the thermal properties and morphology of the hybrid materials were studied by differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, and atomic force microscopy. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 321–328, 2000     

Synthesis and characterization of different poly(1‐vinylindole)s for photorefractive materials

The main goal of this research was to verify if some advantages could be obtained by the replacement of poly(1‐vinylcarbazole), a component commonly employed for organic photorefractive materials, with various polymers containing side‐chain heteroaromatic moieties. For this purpose, poly(1‐vinylpyrrole), poly(1‐vinylindole), and some methyl‐substituted compounds of poly(1‐vinylindole) were considered. The best conditions for both monomer synthesis and polymerization were found. A first possible advantage of the new polymeric substrates resided in the values of the glass‐transition temperature, which, as expected, was constantly lower than that of poly(1‐vinylcarbazole). This could lead to a material that requires the introduction of a lower quantity of plasticizer in the final photorefractive blend to display photorefractive behavior at room temperature. In addition, the verified higher electric dipole moments of the pyrrole and indole derivatives could improve the compatibility of the optically nonlinear component required in the system, typically an azo‐molecule, by increasing its solubility inside the blend. All the synthesized vinyl monomers and polymers gave clear spectroscopic evidence of the formation of charge‐transfer complexes with 2,4,7‐trinitrofluorenylidenmalonitrile, an efficient sensitizer for photoconductivity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 253–262, 2001     

Shell crosslinked polymer assemblies: Nanoscale constructs inspired from biological systems

The general approach involving the organization of polymers into micellar assemblies followed by stabilization through covalent intramicellar crosslinking of the assemblies has emerged as a powerful method for the production of well‐defined nanostructured materials, having an amphiphilic core‐shell morphology. When the covalent crosslinks are limited to the chain segments that compose the polymer micelle shell, then shell crosslinked knedel‐like (SCK) nanostructures result. The shell composition dictates the interactions of the SCKs with external agents, forms a barrier layer over the core domain, and provides robust character to the nanoparticle. Because of the stability that the crosslinked shell provides, the core domain can be of dramatically different compositions and properties—glassy, fluidlike, and crystalline polymer chains have been employed for the core material and the effects that each contributes to the overall nanostructure properties have been examined. Most notably, the shell crosslinks allow for complete removal of the core to generate hollow (solvent‐filled) nanoscale cagelike structures. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1397–1407, 2000     

Synthesis of poly(arylene ether)s containing hole‐transport moieties from an isocyanate masked bisphenol

The design and synthesis of novel charge (hole‐ or electron‐) transport materials have been the focus of much research in recent years because of their wide variety of applications. In this study, three high molecular weight poly(arylene ether)s, 6a–c, containing naphthyl‐substituted benzidine moieties have been synthesized from carbamates derived from bisphenols. After masking with n‐propyl isocyanate, the carbamate is stable, can be readily purified by recrystallization from toluene, and can be polymerized directly with difluoro compounds under mild conditions. The resulting polymers possess high glass‐transition temperatures, excellent thermal stability, and good film‐forming properties. In comparison, the poly(arylene ether)s 6a′–c′, synthesized from unprotected bisphenol, have lower molecular weights and wider polydispersity and contain some brown impurities. Preliminary experiments show that both 6a and 6a′ can function well as hole‐transport materials in light‐emitting diodes. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2740–2748, 2000     

Preparation and properties of high‐pretilt‐angle polyimides based on an alicyclic dianhydride and long alkyloxy side‐group‐containing diamines

A series of polyimides were prepared by a solution polycondensation reaction between 3‐carboxylmethylcyclopentane‐1,2,4‐tricarboxylic dianhydride and 4‐alkyloxybenzene‐1,3‐diamines in N‐methyl‐2‐pyrrolidone and chemical imidization with triethylamine and acetic anhydride. These polyimides possess great organo‐solubility, high optical transparency, and high pretilt angles. They are soluble not only in strong polar aprotic organic solvents such as N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, m‐cresol, and 1,4‐butyrolactone but also in common low‐boiling‐point solvents such as chloroform and tetrahydrofuran, and some are even soluble in acetone. They exhibit high transparency at wavelengths greater than 320 nm. They can generate pretilt angles greater than 5°, and some can even achieve pretilt angles greater than 10°. The pretilt angle of a polyimide increases with the increasing length of the alkyloxy side group. The polyimides possess glass‐transition temperatures between 180 and 230 °C and thermal decomposition temperatures (onset temperatures) of about 435 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1943–1950, 2000     

Main‐chain syndioregic nonlinear optical polymers. II. Extended pi conjugation and improved thermal properties

Recent results concerning the synthesis of new main‐chain syndioregic nonlinear optical polymers are presented. In particular, the synthesis of polymers with extended pi conjugation in the chromophore and chromophores with improved thermal stability are presented. The nonlinear optical coefficient of several of the polymers and the optical loss at 1.3 and 1.55 μm were measured and are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2824–2839, 2000     

A thermal and mechanical study under dynamical conditions of polypropylene/mica composites containing atactic polypropylene with succinil‐fluoresceine grafted groups as interfacial modifier from the matrix side

The dynamic thermal and mechanical behavior of Polypropylene/Mica composites—with improved properties induced by the presence of succinil‐fluoresceine groups onto atactic polypropylene with different grafting levels—is the subject of this article. A further correlation of these with the macroscopic mechanical performance of the composite materials is also discovered. The atactic polypropylenes containing succinil‐fluoresceine grafted groups were previously obtained in our laboratories by chemical modification of a byproduct of industrial polymerization reactors. The interfacial modifications induced by replacing a little amount of polymer matrix in the composite material by the grafted atactic polypropylene is clearly concluded either from a microscopic or a macroscopic point of view. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1564–1574, 2000     

Printed plastic electronics and paperlike displays

Plastic electronic materials and high‐resolution printing methods may be important technologies for new classes of consumer electronic devices that are lightweight, mechanically flexible and bendable, and that can cover large areas at low cost. This article summarizes some of our recent work in this area. It focuses on the materials and patterning techniques that we used to produce plastic active‐matrix backplane circuits for a type of paperlike display. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3327–3334, 2002     

Flexibilized styrene‐N‐substituted maleimide copolymers. I. Multiblock copolymers prepared from styrene‐maleimide telechelics and polytetrahydrofuran

Telechelic copolymers of styrene and different N‐substituted‐maleimides (SMIs) with a molecular weight of 2000–8000 g/mol were synthesized using the starved‐feed‐reactor technique and were nearly bifunctional when the monomer feed had a high styrene concentration. The COOH‐terminated rigid SMI blocks were polycondensated with OH‐terminated poly(tetrahydrofuran) (PTHF) blocks, with a molecular weight of 250–1000 g/mol, which are the flexible parts in the generated homogeneous multiblock copolymer. The entanglement density, which is closely related to the toughness of materials, increased in these flexible SMI copolymers (ν_e = 5.2 · 10²⁵ m⁻³) compared to the unflexibilized ones (ν_e = 2.4 · 10²⁵ m⁻³). The glass transition temperature of these flexibilized, single‐phase multiblock copolymers was still high enough to qualify them as engineering plastics. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3550–3557, 2000     

The synthesis and X‐ray structure of 1,2,3,4‐cyclobutane tetracarboxylic dianhydride and the preparation of a new type of polyimide showing excellent transparency and heat resistance

Some polyimide films based on cyclobutane‐1,2,3,4‐tetracarboxylic dianhydride (CBDA) and aromatic diamines were synthesized to investigate their temperature resistance and percent transmission of light. The preparations of CBDA were investigated; they produced almost 10 times the yield of CBDA in comparison to yields obtained by previous methods. The configuration of CBDA was determined by X‐ray analysis to be cis–trans–cis. The polymer films showed excellent thermal resistance and were transparent and colorless, desirable characteristics for practical applications in the field of polymer engineering. However, the polymer obtained from a pyromellitic dianhydride instead of from CBDA was deep yellow and not desirable for high‐qualified display materials such as liquid‐crystal displays. The percent transmission of the polymers obtained from CBDA and aromatic diamines ranged from 81.5 to 85.8%, whereas the deep‐yellow polymers showed low percent transmissions ranging from 48 to 63.9%. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 108–116, 2000     

Gas‐free initiators for high‐temperature free‐radical polymerization

Quaternary ammonium persulfates as free‐radical initiators for high‐temperature polymerization are synthesized and their shelf‐life stability investigated. These initiators do not have gaseous byproducts and are therefore ideal for frontal polymerization, a process in which polymeric materials are produced via a thermal front that propagates through the unreacted monomer/initiator solution. Quaternary ammonium persulfate initiators offer additional qualities such as high solubility in organic media and low volatility, which are desirable for frontal polymerization. The initiators are synthesized using two procedures, and the initiating efficacy of the respective products is compared to a peroxide initiator in the frontal polymerization of 1,6‐hexanediol diacrylate. Of all the quartenary ammonium persulfates synthesized, tricaprylmethylammonium (Aliquat) persulfate (APSO) is the best initiator for frontal polymerization because it is soluble in organic media, is very reactive, and does not produce volatile byproducts under decomposition. A study of the decomposition kinetics of APSO is performed, and frontal polymerization is proposed as a quicker analytical technique to assay the purity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3984–3990, 2000     

Effect of SSL and HSC on morphology and properties of PHA based SMPU synthesized by bulk polymerization method

Searching new shape memory polymer and the associating synthesis technology are critical on the development of smart materials. In this paper, a comprehensive study on Poly(hexylene adipate) PHA being the soft segment of shape memory polyurethane (SMPU) was presented. Bulk polymerization method was employed to synthesize the SMPU with different soft segment length (SSL) and hard segment content (HSC). The influences of SSL and HSC on its morphology and thermomechanical property using DSC, DMA, POM, and shape memory behavior were presented here. The results indicate that the thermal properties, dynamic mechanic properties, and crystal morphology of SMPU are influenced significantly by SSL and HSC. And it is found that the shape fixity increases with SSL but decreases with HSC. On the other hand, the shape recovery decreases with both SSL and HSC, and the associated recovery temperature increases either with the increasing SSL or with decreasing HSC. Lastly, it is concluded that in the PHA‐based‐SMPU, the lower limiting value of SSL for polyurethane having shape memory effect is 2000; their response temperature varied with SSL and HSC, changing from 41.0 to 51.9 °C. Stable hard segment crystal are formed at above 30% HSC sample in bulk polymerization, but shape memory behavior can also be observed when its physical crosslink point are formed in the lower HSC PHA‐based‐SMPU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 444–454, 2007     

Partially bio‐based aromatic polyimides derived from 2,5‐furandicarboxylic acid with high thermal and mechanical properties

Two novel bio‐based diamines are synthesized through introduction of renewable 2,5‐furandicarboxylic acid (2,5‐FDCA), and the corresponding aromatic polyimides (PIs) are then prepared by these diamines with commercially available aromatic dianhydrides via two‐step polycondensation. The partially bio‐based PIs possess high glass transition temperatures (T_gs) in the range from 266 to 364 °C, high thermal stability of 5% weight loss temperatures (T_5%s) over 420 °C in nitrogen and outstanding mechanical properties with tensile strengths of 79–138 MPa, tensile moduli of 2.5–5.4 GPa, and elongations at break of 3.0–12.3%. Some colorless PI films (PI‐1‐b and PI‐1‐c) with the transmittances at 450 nm over 85% are prepared. The overall properties of 2,5‐FDCA‐based PIs are comparable with petroleum‐based PI derived from isophthalic acid, displaying the potential for development of innovative bio‐based materials. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1058–1066     

Sustainable self‐healing elastomers with thermoreversible network derived from biomass via emulsion polymerization

Motivated by the growing demand for greener and sustainable polymer systems, self‐healing elastomers were prepared by emulsion polymerization of terpene and furfural‐based monomers. Both the method and the monomers were green and sustainable. The synthesized copolymers showed molecular weights between 59,080 and 84,210 Da and glass‐transition temperature (T_g) between ?25 and ?40 °C, implying rubbery properties. A set of one‐dimensional (1D) and two‐dimensional (2D) NMR spectroscopy supported the formation of the copolymer and nuclear spin–spin coupling in the copolymer. Reactivity ratios were determined by conventional linear method. A thermoreversible network was achieved for the first time by reacting the furan‐based polymer with bismaleimide (BM) as a crosslinker, via a Diels?Alder (DA) coupling reaction. The reversible nature of the polymer network was evidenced from infrared and NMR spectroscopy. The thermoreversible character of the DA crosslinked adduct was confirmed by applying retro‐DA reaction (observed in differential scanning calorimeter [DSC] analysis) and mechanical recovery was verified by repeated heating and cooling cycles. The network polymers displayed excellent self‐healing ability, triggered by heating at 130 °C for 4–12 h, when their scratched surface was screened by microscopic visualization. The healing efficiency of the crosslinked DA‐adduct was calculated as 78%, using atomic force microscopy. This work provides a green and efficient approach to prepare new green and functional materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 738–751     

Anionic polymerization: High vacuum techniques

Anionic polymerization is a powerful tool for the synthesis of a variety of model materials with well‐defined molecular characteristics. However specially designed apparatuses and appropriate high vacuum techniques are needed in order to exclude from the reaction environment all reactive contaminants with the anionic centers. This review describes the basic principles of anionic polymerization as well as detailed experimental methods for the purification of the reagents usually used for the synthesis of model polymeric materials. In addition a few examples of the synthesis of polymers with complex architecture are given. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3211–3234, 2000     

Styrene‐butadiene copolymers with different butadiene microstructure: Mechanical,swelling, and orientational properties

Results of equilibrium stress‐strain and swelling experiments are reported for styrene‐butadiene copolymers of varying butadiene microstructure. The orientation of polymer chains was investigated under uniaxial elongation by birefringence and infrared dichroism spectroscopies which probe orientation on a segmental scale. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2449–2456, 2000     

Dynamic covalent polymers

This Highlight presents an overview of the rapidly growing field of dynamic covalent polymers. This class of polymers combines intrinsic reversibility with the robustness of covalent bonds, thus enabling formation of mechanically stable, polymer‐based materials that are responsive to external stimuli. It will be discussed how the inherent dynamic nature of the dynamic covalent bonds on the molecular level can be translated to the macroscopic level of the polymer, giving access to a range of applications, such as stimuli‐responsive or self‐healing materials. A primary distinction will be made based on the type of dynamic covalent bond employed, while a secondary distinction will be based on the consideration whether the dynamic covalent bond is used in the main chain of the polymer or whether it is used to allow side chain modification of the polymer. Emphasis will be on the chemistry of the dynamic covalent bonds present in the polymer, in particular in relation to how the specific (dynamic) features of the bond impart functionality to the polymer material, and to the conditions under which this dynamic behavior is manifested. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3551–3577.     

Synthesis and thermal properties of a bio‐based polybenzoxazine with curing promoter

A fully bio‐based benzoxazine, 3‐furfuryl‐8‐methoxy‐3,4‐dihydro‐2H‐1,3‐benzoxazine (Bzf), has been prepared using guaiacol, furfurylamine, and paraformaldehyde as raw materials. Its chemical structure has been characterized by 1H and 13C NMR, FTIR, and elemental analysis. The polymerization behavior of Bzf in the presence of methyl p‐toluenesulfonate (PTSM) has been studied by FTIR and DSC, and the thermal stability of the cured resin has been evaluated by thermogravimetric analysis. It was found that PTSM is a good promoter that serves to avoid thermal decomposition of the bio‐based monomer during the curing process at high temperature. In contrast to the situation with neat Bzf, the presence of PTSM (5 mol % for Bzf) significantly improves the polymerization behaviors, including a decrease in the polymerization temperature from 240 to 174 °C, a shortening of the time required to reach the gel point on heating at 200 °C from 47 to 20 min, and an increase in the char yield of the cured resin from 53 to 62%. Moreover, these observed experimental results on the promoting effect of PTSM are interpreted in terms of several possible mechanistic schemes, which involve a catalytic effect on the dissociation of C? O bonds in both the coordination ring‐opening reaction and the rearrangement from a phenoxy structure to a phenolic structure. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013