Polymerization of methyl methacrylate by metallocene imido complexes and tris(pentafluorophenyl)alane

The polymerization of methyl methacrylate (MMA) was investigated with tris(pentafluorophenyl)alane [Al(C₆F₅)₃] and four metallocene imido complexes that varied in the complex symmetry/chirality, metal, and R group in the ?NR moiety, as well as a zirconocene enolate preformed from the imido zirconocene and MMA. This study examined four aspects of MMA polymerization: the effects of the metallocene imido complex structure on the polymerization activity and polymer tacticity, the degree of polymerization control, the elementary reactions of the imido complex with Al(C₆F₅)₃ and MMA, and the polymerization kinetics and mechanism. There was no effect of the imido complex symmetry/chirality on the polymerization stereochemistry; the polymerization followed Bernoullian statistics, producing syndiotactic poly(methyl methacrylate)s with moderate (～70% [rr]) to high (～91% [rr]) syndiotacticity, depending on the polymerization temperature. Polymerization control was demonstrated by the number‐average molecular weight, which increased linearly with an increase in the monomer conversion to 100%, and the relatively small and insensitive polydispersity indices (from 1.21 to 1.17) to conversion. The reactions of the zirconocene imido complex with Al(C₆F₅)₃ and MMA produced the parent base‐free imido complex and the [2 + 4] cycloaddition product (i.e., zirconocene enolate), respectively; the latter product reacted with Al(C₆F₅)₃ to generate the active zirconocenium enolaluminate. The MMA polymerization with the metallocene imido complex and the alane proceeded via intermolecular Michael addition of the enolaluminate to the alane‐activated MMA involved in the propagation step. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3132–3142, 2003     

Polymerization of methyl methacrylate with cobalt acetylacetonate-diethyl zinc catalyst system

Polymerization of methyl methacrylate was studied with a cobalt acetylacetonate-diethyl zinc catalyst initiator system in benzene medium at 40°C. When the stoichiometric ratio of Zn/Co is 2, the activity for polymerization is found to be maximum. The structure of the obtained polymethyl methacrylate is compared with that obtained using a free-radical initiator such as benzoyl peroxide. The structure of polymer and the M?_w/M?_n values indicate that cobalt acetylacetonate-zinc diethyl system has pronounced free-radical characteristics. A suitable mechanism is proposed from the kinetic studies. © 1995 John Wiley & Sons, Inc.     

聚甲基丙烯酸甲酯/二氧化硅杂化材料制备与性能

溶胶-凝胶;聚硅酸;聚甲基丙烯酸甲酯/二氧化硅杂化材料制备与性能     

Compatibilization of blends of polybutadiene and poly(methyl methacrylate) with poly(butadiene-block-methyl methacrylate)

Compatibilization of blends of polybutadiene and poly(methyl methacrylate) with butadiene-methyl methacrylate diblock copolymers has been investigated by transmission electron microscopy. When the diblock copolymers are added to the blends, the size of PB particles decreases and their size distribution gets narrower. In PB/PMMA7.6K blends with P(B-b-MMA)25.2K as a compatibilizer, most of micelles exist in the PMMA phase. However, using P(B-b-MMA)38K as a compatibilizer, the micellar aggregation exists in PB particles besides that existing in the PMMA phase. The core of a micelle in the PMMA phase is about 10 nm. In this article the influences of temperature and homo-PMMA molecular weight on compatibilization were also examined. At a high temperature PB particles in blends tend to agglomerate into bigger particles. When the molecular weight of PMMA is close to that of the corresponding block of the copolymer, the best compatibilization result would be achieved. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 85–93, 1998     

Stereocomplex Formation of Atactic Poly(methyl methacrylate)

Stereocomplexes formed in atactic poly(methyl methacrylate) (a-PMMA) films cast form different solvents were studied by means of Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). The growth of stereocomplex was a function of annealing temperature and annealing time, respectively.     

Characterization of azo-containing polydimethylsiloxanes and their copolymers with methyl methacrylate

Azo group-containing polydimethylsiloxanes (PDMS–ACP), macroazoinitiators, were prepared by polycondensation reaction of 4,4′-azobis-4-cyanopentanoyl chloride (ACPC) with hydroxybutyl-terminated polydimethylsiloxane (PDMS) of varying molecular weights. The activation energy (E_a), activation enthalpy (ΔH^‡), and activation entropy (ΔS^‡) of the thermodecomposition of PDMS-ACP in toluene increased with increase in poly-dimethyl-siloxane chain length (SCL) in PDMS moieties, while the activation free energy (ΔG^‡) was independent on the SCL. The polydimethylsiloxane-poly(methyl methacrylate) block copolymers (PDMS-b-PMMA) were prepared by the use of PDMS-ACP macroazoinitiators, and they were characterized by ¹H-, ²⁹Si-, and ¹³C-nuclear magnetic resonance (NMR) spectroscopies. The microstructure and morphology of copolymers were investigated by proton spin–spin relaxation measurements and scanning electron microscopy (SEM). © 1996 John Wiley & Sons, Inc.     

Reversible Addition‐fragmentation Chain Transfer Polymerization Grafted from Silicon Surface to Prepare Poly(methyl methacrylate) Brushes

通过共价键锚固链转移剂4-氰基-4-二硫代苯甲酰基戊酸琥珀酯于硅片表面,然后采用可逆加成-断裂链转移（RAFT）自由基聚合方法制备了聚甲基丙烯酸甲酯（PMMA）高分子刷. 聚合动力学研究表明,在反应进行2小时后,PMMA的厚度随聚合时间的增大而几乎呈线性增大,具有明显的活性聚合特征. 用椭圆偏光仪、X-光电子能谱（XPS）、原子力显微镜（AFM）及接触角测试对硅片表面的PMMA高分子刷进行了表征.     

悬浮聚合制备大粒径磁性聚甲基丙烯酸甲酯微珠: 反应参数对微珠粒径的影响

采用低速搅拌悬浮聚合制得了一系列磁性聚甲基丙烯酸甲酯(PMMA)微珠. 分别以聚乙烯醇(PVA 1788)和碱式碳酸镁作为稳定剂和助分散剂, Fe3O4磁流体为磁性物质, 双甲基丙烯酸甲酯为交联剂. 所有粒子的直径在1～3 mm 范围内, 微球的粒径及其分布可以通过改变聚合反应介质来进行调节. 着重研究了反应体系中电解质的用量、聚合反应温度、水油比、碱式碳酸镁及交联剂的用量等反应参数对微球粒径的影响. 利用振动探针式磁强计(VSM)和原子吸收光谱(AAS)分别对磁性PMMA微珠的超顺磁性和Fe3O4含量进行了表征.     

Synthesis of Poly(methyl methacrylate) Nanosize Particles by Differential Microemulsion Polymerization

Poly(methyl methacrylate) nanosize particles were synthesized by a differential microemulsion polymerization process. Sodium dodecylsulfate and ammonium persulfate were used as the surfactant and initiator, respectively. The effects of reaction conditions on the particle size have been investigated. A particle size of less than 20 nm in diameter has been achieved with surfactant/monomer and surfactant/water weight ratios of 1:18 and 1:120, i.e. much milder conditions than those previously reported in the literature.

TEM image of nanoparticles prepared via differential microemulsion polymerization.     

Nanocarbon-poly(methyl methacrylate) composite materials

Nanocarbon-poly(methyl methacrylate) sols were prepared by pulsed laser ablation at the interface of target submerged in flowing liquid (PLA-IT/SFL) method, and the corresponding composite films were prepared by solution-casting. Spectra results indicated that there existed interactions between nanocarbon and the polymethyl methacrylate (PMMA) matrix, which was consistent with the decrease in glass transition temperature of the composites with increase of carbon content. TEM images revealed that a carbon encapsulated core/shell structure was formed in the composites, which could ensure good dispersion of carbon nanoparticles within the PMMA matrix. The decomposition of the composites was less influenced by the introduction of nanocarbon particles. Translated from Acta Polymerica Sinica 2006, 2(2) (in Chinese)     

Property modification of poly(methyl methacrylate) through copolymerization with fluorinated aryl methacrylate monomers

Copolymers of methyl methacrylate (MMA) with 2,3,5,6‐tetrafluorophenyl methacrylate (TFPMA), pentafluorophenyl methacrylate (PFPMA), and 4‐trifluoromethyl‐2,3,5,6‐tetrafluorophenyl methacrylate (TFMPMA) were investigated. All the three systems showed a random copolymerization character. The composition, glass transition temperature (T_g), and refractive index of the copolymers obtained were studied. T_gs of TFPMA/MMA and PFPMA/MMA copolymers were found to deviate positively from the Gordon–Taylor equation. However, T_gs of TFMPMA/MMA copolymers were well fit with the Gordon–Taylor equation. These results indicated the existence of interaction between MMA and either TFPMA or PFPMA units in copolymers. This interaction resulted in the enhancement of the T_g of MMA polymers through the copolymerization with TFPMA and PFPMA. The refractive index and the light transmittance of copolymers were close to those of PMMA. Copyright © 2007 John Wiley & Sons, Ltd.     

Phase behavior of a water/2‐propanol/poly(methyl methacrylate) cosolvent system

A phase diagram of poly(methyl methacrylate) in mixtures of water and 2‐propanol, individually nonsolvents for the polymer, was studied at 25 °C. For this system, there were two liquid–liquid demixing regions separated by a miscible region. This cosolvent phenomenon was thought to be a joint effect of the nonsolvents. The phase behavior was modeled according to modified Flory–Huggins chemical‐potential equations, which accounted for the possible contribution from a ternary interaction in terms of a lumped parameter, χ₁₂₃. The calculated phase‐equilibrium curves (binodals) agreed well with the measured results. By contrast, if only binary interaction parameters were considered, computations yielded binodals whose compositions departed significantly from the measured data. Using the wet phase inversion method with casting dopes selected on the basis of the phase diagram, we prepared membranes with microporous structures in various coagulation baths. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 747–754, 2000     

聚甲基丙烯酸甲酯与聚醋酸乙烯酯共混的红外光谱研究

用红外光谱(FTIR)研究了聚甲基丙烯酸甲酯(PMMA)与聚醋酸乙烯酯(PVAc)共混体系相容性,在160℃以上共混体系发生相分离;分相体系与非分相体系的FTIR谱明显不同;共混体系的FTIR谱不能从两统组分红外光谱简单加和得到;结果表明大分子构象发生了变化,PMMA/PVAc体系相容可能是大分子构象熵变所致。     

Stress–strain behavior of low‐density polyethylene/poly(methyl methacrylate) blends with modulated interfaces with a hydrogenated polybutadiene‐block‐poly(methyl methacrylate) diblock copolymer

The stress–strain diagrams and ultimate tensile properties of uncompatibilized and compatibilized hydrogenated polybutadiene‐block‐poly(methyl methacrylate) (HPB‐b‐PMMA) blends with 20 wt % poly(methyl methacrylate) (PMMA) droplets dispersed in a low‐density polyethylene (LDPE) matrix were studied. The HPB‐b‐PMMA pure diblock copolymer was prepared via controlled living anionic polymerization. Four copolymers, in terms of the molecular weights of the hydrogenated polybutadiene (HPB) and PMMA sequences (22,000–12,000, 63,300–31,700, 49,500–53,500, and 27,700–67,800), were used. We demonstrated with the stress–strain diagrams, in combination with scanning electron microscopy observations of deformed specimens, that the interfacial adhesion had a predominant role in determining the mechanism and extent of blend deformation. The debonding of PMMA particles from the LDPE matrix was clearly observed in the compatibilized blends in which the copolymer was not efficiently located at the interface. The best HPB‐b‐PMMA copolymer, resulting in the maximum improvement of the tensile properties of the compatibilized blend, had a PMMA sequence that was approximately half that of the HPB block. Because of the much higher interactions encountered in the PMMA phase in comparison with those in HPB (LDPE), a shorter sequence of PMMA (with respect to HPB but longer than the critical molecular weight for entanglement) was sufficient to favor a quantitative location of the copolymer at the LDPE/PMMA interface. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 22–34, 2005     

Analysis of amino acids and proteins using a poly(methyl methacrylate) microfluidic system

Plastic microchips are very promising analytical devices for the high-speed analysis of biological compounds. However, due to its hydrophobicity, their surface strongly interacts with nonpolar analytes or species containing hydrophobic domains, resulting in a significant uncontrolled adsorption on the channel walls. This paper describes the migration of fluorescence-labeled amino acids and proteins using the poly(methyl methacrylate) microchip. A cationic starch derivative significantly decreases the adsorption of analytes on the channel walls. The migration time of the analytes was related to their molecular weight and net charge or pI of the analytes. FITC-BSA migrated within 2 min, and the theoretical plate number of the peak reached 480,000 plates/m. Furthermore, proteins with a wide range of pI values and molecular weights migrated within 1 min using the microchip.     

Poly(methyl methacrylate) encapsulation of calcium carbonate particles

Dispersed calcium carbonate particles are encapsulated with poly(methyl methacrylate). The optimum condition for the polymerization is investigated; and the encapsulated particles are characterized by spectrophotometric analysis, acid decomposition, thermal analysis, and microscopic observation. From the conversion comparison of the MMA monomer it is found that the optimum concentration of polymerization initiator is 1.58 × 10^?3 mol/L. The highest yield of encapsulation is obtained at 250 rpm with a concentration of 0.5 wt % surfactant (sodium dodecyl benzene sulfonate). A comparison of the Fourier transform IR spectra distinctly indicates the formation of PMMA on the surface of the calcium carbonate particles. The outcome of an acid decomposition test proves that the PMMA coating protects the particles. In addition, thermal analyses and microscopic observation characterize the PMMA on the surface of encapsulated particles. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4063–4073, 2004     

Synthesis of Polystyrene and Polystyrene/Poly(methyl methacrylate) Nanoparticles

Summary: Polystyrene nanosize particles have been synthesized by a differential microemulsion polymerization process involving the use of a small amount of poly(methyl methacrylate) as the seeds. Sodium dodecyl sulfate and ammonium persulfate were used as the surfactant and initiator, respectively. The effects of various reaction conditions on the particle size have been investigated. Particle sizes of less than 20 nm have been achieved at milder conditions than those previously reported in the literature.

An HRTEM image of PS/PMMA nanoparticles.     

Investigation at the chain segmental level of the miscibility of poly(vinyl chloride)/atactic poly(methyl methacrylate) blends

We employed high‐resolution ¹³C cross‐polarization/magic‐angle‐spinning/dipolar‐decoupling NMR spectroscopy to investigate the miscibility and phase behavior of poly(vinyl chloride) (PVC)/poly(methyl methacrylate) (PMMA) blends. The spin–lattice relaxation times of protons in both the laboratory and rotating frames [T₁(H) and T_1ρ(H), respectively] were indirectly measured through ¹³C resonances. The T₁(H) results indicate that the blends are homogeneous, at least on a scale of 200–300 Å, confirming the miscibility of the system from a differential scanning calorimetry study in terms of the replacement of the glass‐transition‐temperature feature. The single decay and composition‐dependent T_1ρ(H) values for each blend further demonstrate that the spin diffusion among all protons in the blends averages out the whole relaxation process; therefore, the blends are homogeneous on a scale of 18–20 Å. The microcrystallinity of PVC disappears upon blending with PMMA, indicating intimate mixing of the two polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2390–2396, 2001     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.