N‐Bromosuccinimide as a thermal iniferter for radical polymerization

N‐Bromosuccinimide (NBS) was used as a thermal iniferter for the initiation of the bulk polymerizations of methyl methacrylate, methyl acrylate, and styrene. The polymerizations showed the characteristics of a living polymerization: both the yields and the molecular weights of the resultant polymers increased linearly as the reaction time increased. The molecular weight distributions of the polymers were 1.42–1.95 under the studied conditions. The resultant polymers could be used as macroiniferters to reinitiate the polymerization of the second monomer. The copolymers poly(methyl methacrylate)‐b‐polystyrene and polystyrene‐b‐poly(methyl methacrylate) were obtained and characterized. End‐group analysis of the resultant poly(methyl methacrylate), poly(methyl acrylate), and polystyrene confirmed that NBS behaved as a thermal iniferter. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2567–2573, 2005     

Iniferter concept and living radical polymerization

Iniferters are initiators that induce radical polymerization that proceeds via initiation, propagation, primary radical termination, and transfer to initiator. Because bimolecular termination and other transfer reactions are negligible, these polymerizations are performed by the insertion of the monomer molecules into the iniferter bond, leading to polymers with two iniferter fragments at the chain ends. The use of well‐designed iniferters would give polymers or oligomers bearing controlled end groups. If the end groups of the polymers obtained by a suitable iniferter serve further as a polymeric iniferter, these polymerizations proceed by a living radical polymerization mechanism in a homogeneous system. In these cases, the iniferters (C S bond) are considered a dormant species of the initiating and propagating radicals. In this article, I describe the history, ideas, and some characteristics of iniferters and living radical polymerization with some iniferters that contain dithiocarbamate groups as photoiniferters and several compounds as thermal iniferters. From the viewpoint of controlled polymer synthesis, iniferters can be classified into several types: thermal or photoiniferters; monomeric, polymeric, or gel iniferters; monofunctional, difunctional, trifunctional, or polyfunctional iniferters; monomer or macromonomer iniferters; and so forth. These lead to the synthesis of various monofunctional, telechelic, block, graft, star, and crosslinked polymers. The relations between this work and other recent studies are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2121–2136, 2000     

Reverse atom transfer radical polymerization of vinyl monomers with Fe[SC(S)NEt2]3 alone as the catalyst

The living radical polymerization of methyl methacrylate and styrene was successfully carried out with diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS)/ferric tri(diethyldithiocarbamate) as a novel reverse atom transfer radical polymerization initiation system in which DCDPS was a hexa‐substituted ethane‐type thermal iniferter, DC was a diethyldithiocarbamate group, and no additional ligands such as nitrogen‐ or phosphine‐based compounds were required. The bulk polymerization of methyl methacrylate was carried out at 95 °C, and that of styrene was carried out at 120 °C. Poly(methyl methacrylate) and polystyrene (PSt) with high molecular weights and quite narrow molecular weight distributions (as low as 1.09 for PSt) were obtained. ¹H NMR spectroscopy revealed the presence of an α‐(carbethoxycyanophenyl)methyl group from the initiator and an ω‐DC group from the catalyst in the obtained polymers. Various chain‐extension reactions under UV light or thermal treatments were successfully conducted to prove the presence and efficient reinitiating of the ω‐DC group. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3464–3473, 2001     

Living/controlled radical polymerization of styrene with a new initiating system: DCDPS/FeCl3/PPh3

The living/controlled radical polymerization of styrene was investigated with a new initiating system, DCDPS/FeCl₃/PPh₃, in which diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS) was a hexa‐substituted ethane thermal iniferter. The polymerization mechanism belonged to a reverse atom transfer radical polymerization (ATRP) process. The polymerization was controlled closely in bulk (at 100 °C) or in solution (at 110 °C) with a high molecular weight and quite narrow polydispersity (M_w/M_n = 1.18 ∼ 1.28). End‐group analysis results by ¹H NMR spectroscopy showed that the polymer was ω‐functionalized by a chlorine atom, which also was confirmed by the result of a chain‐extension reaction in the presence of a FeCl₂/PPh₃ or CuCl/bipy (2,2′‐bipyridine) catalyst via a conventional ATRP process. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 101–107, 2000     

A simple FTIR spectroscopic method for the determination of the lower critical solution temperature of N‐isopropylacrylamide copolymers and related hydrogels

Linear and crosslinked polymers based on N‐isopropylacrylamide (NIPAAm) exhibit unusual thermal properties. Aqueous solutions of poly(N‐isopropylacrylamide) (PNIPAAm) phase‐separate upon heating above a lower critical solution temperature (LCST), whereas related hydrogels undergo a swelling–shrinking transition at an LCST. A linear copolymer made of NIPAAm/acryloxysuccinimide (98/2 mol/mol) and two hydrogels with different hydrophilicities were prepared. Fourier transform infrared (FTIR) spectroscopy was employed to determine the transition temperature and provide insights into the molecular details of the transition via probing of characteristic bands as a function of temperature. The FTIR spectroscopy method described here allowed the determination of the transition temperature for both the linear and crosslinked polymers. The transition temperatures for PNIPAAm and the gel resulting from the crosslinking with polylysine or N,N′‐methylenebisacrylamide (MBA) were in the same range, 30–35 °C. For the gels, the transition temperature increased with the hydrophilicity of the polymer matrix. The spectral changes observed at the LCST were similar for the free chains and the hydrogels, implying a similar molecular reorganization during the transition. The C H stretching region suggests that the N‐isopropyl groups and the backbone both underwent conformational changes and became more ordered upon heating above the LCST. An analysis of the amide I band suggests that the amide groups of the linear polymer were mainly involved in hydrogen bonding with water molecules below the LCST, the chain being flexible and disordered in a water solution. During the transition, around 20% of these intermolecular hydrogen bonds between the polymer and water were broken and replaced by intramolecular hydrogen bonds. Similar changes were also observed at the LCST of a gel crosslinked with MBA. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 907–915, 2000     

A novel photosensitive ternary complex consisting of phenol‐formaldehyde resin,sodium dodecyl sulfate,and diazo resin

A novel photosensitive ternary complex formed from phenol‐formaldehyde resin (PR), sodium dodecyl sulfate (SDS), and diazo resin (DR) was developed. In the presence of SDS, PR remains soluble in water when its solution is neutralized. The PR‐SDS‐DR ternary complex forms when DR is added to the PR‐SDS solution. The ternary complex dissolves in polar solvents such as dimethylformamide and is sensitive toward UV light or heating. It was confirmed that the ionic bond of  SO +N₂ between SDS and DR converts to a covalent bond after the decomposition of the ⁺N₂ group under UV irradiation or heating. As a result, the solubility of PR‐SDS‐DR changes dramatically; that is, after treatment with UV light or heating, PR‐SDS‐DR becomes insoluble in polar solvents. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2566–2571, 2000     

Synthesis,characterization, and stability of carbodiimide groups in carbodiimide‐functionalized latex dispersions and films

Cyclohexylcarbodiimidoethyl methacrylate (CCEMA) and t‐butylcarbodiimidoethyl methacrylate (t‐BCEMA) were prepared in a two‐step synthesis. These monomers were then used to prepare carbodiimide‐functionalized PBMA and PEHMA latex particles, employing two‐stage emulsion polymerization, with the carbodiimide–methacrylate monomers being introduced only in the second stage under monomer‐starved conditions. During emulsion polymerization, the carbodiimide moiety ( NCN ) was found to be unstable at pH 4, but stable when the pH of the dispersion was increased to 8, using NaHCO₃ as the buffer. Survival of  NCN group against hydrolysis during the polymerization, and during storage in the dispersion, was enhanced by using EHMA as the comonomer (more hydrophobic) and the t‐butyl carbodiimide derivative. The t‐butyl group provides more steric hindrance to the hydrolysis reaction. A decrease in the reaction temperature from 80°C to 60°C was also found to increase the extent of  NCN group incorporation during emulsion polymerization. Under ideal conditions, more than 98% of the  NCN groups in the monomer feed are successfully incorporated into the latex. When these latex particles are mixed with a  COOH containing latex and allowed to dry, polymer diffusion leading to crosslinking occurs. Films annealed at 60°C reach a gel content of 60% in 10 h. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 855–869, 2000     

引发转移终止剂技术合成含有聚异戊二烯链段的三嵌段共聚物

含聚异戊二烯 (ＰＩＰ)链段的嵌段共聚物有着广泛的应用[1～ 3 ] ,有关它的合成、性能表征及应用方面的研究一直是学术及工业界的研究热点 .传统上 ,含有ＰＩＰ链段的嵌段共聚物用活性负离子聚合的方法来合成 ,例如 :聚苯乙烯 聚异戊二烯嵌段共聚物[3 ,4 ] .这是由聚合物增长链端的特殊活性所决定的 ,采用活性负离子聚合方法 ,不但能很好地控制共聚物的分子量和分子量分布 ,而且能控制共聚物中各组分的比例 .但是 ,负离子聚合通常需在较苛刻的条件下进行 ,如低温高真空、高纯度的单体和溶剂 ,而且能用于负离子聚合的单体也有限 .相对而言 ,…     

Facile Soap‐Free Miniemulsion Polymerization of Methyl Methacrylate via Reverse Atom Transfer Radical Polymerization

A facile soap‐free miniemulsion polymerization of methyl methacrylate (MMA) was successfully carried out via a reverse ATRP technique, using a water‐soluble potassium persulfate (KPS) or 2,2′‐azobis(2‐methylpropionamidine) dihydrochloride (V‐50) both as the initiator and the stabilizer, and using an oil‐soluble N,N‐n‐butyldithiocarbamate copper (Cu(S₂CN(C₄H₉)₂)₂) as the catalyst without adding any additional ligand. Polymerization results demonstrated the “living”/controlled characteristics of ATRP and the resultant latexes showed good colloidal stability with average particle size around 300–700 nm in diameter. The monomer droplet nucleation mechanism was proposed. NMR spectroscopy and chain‐extension experiments under UV light irradiation confirmed the attachment and livingness of UV light sensitive  S C(S) N(C₄H₉)₂ group in the chain end.     

Thermo‐responsive fluorescent micelles from amphiphilic A3B miktoarm star copolymers prepared via a combination of SET‐LRP and RAFT polymerization

A novel amphiphilic A₃B miktoarm star copolymer poly(N‐isopropylacrylamide)₃‐poly(N‐vinylcarbazole) ((PNIPAAM)₃(PVK)) was successfully synthesized by a combination of single‐electron transfer living radical polymerization (SET‐LRP) and reversible addition‐fragmentation chain transfer (RAFT) polymerization. First, the well‐defined three‐armed poly(N‐isopropylacrylamide) (PNIPAAM)₃ was prepared via SET‐LRP of N‐isopropylacrylamide in acetone at 25 °C using a tetrafunctional bromoxanthate iniferter (Xanthate‐Br₃) as the initiator and Cu(0)/PMDETA as a catalyst system. Secondly, the target amphiphilic A₃B miktoarm star copolymer ((PNIPAAM)₃(PVK)) was prepared via RAFT polymerization of N‐vinylcarbazole (NVC) employing (PNIPAAM)₃ as the macro‐RAFT agent. The architecture of the amphiphilic A₃B miktoarm star copolymers were characterized by GPC, ¹H‐NMR spectra. Furthermore, the fluorescence intensity of micelle increased with the temperature and had a good temperature reversibility, which was investigated by dynamic light scattering (DLS), fluorescent and UV‐vis spectra. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4268–4278, 2010     

Photoinduced and thermally induced cationic polymerizations using S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salts

A study of the photoinitiated and thermally initiated cationic polymerizations of several monomer systems with S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salt (HPS) photoinitiators bearing different lengths of alkyl chains on the positively charged sulfur atom has been conducted. HPS photoinitiators are capable of photoinitiating the cationic polymerization of a wide variety of epoxy and vinyl ether monomers directly on irradiation with short‐wavelength UV light. Aryl ketone photosensitizers are effective in extending the spectral response of these photoinitiators into the long‐wavelength UV region. Kinetic studies with real‐time infrared spectroscopy show that HPS photoinitiators exhibit good efficiency in the polymerization of epoxide and vinyl ether monomers. Comparative studies also demonstrate that S,S‐dimethyl‐S‐(3,5‐dimethyl‐2‐hydroxyphenyl)sulfonium salts are more active photoinitiators than their isomeric S,S‐dimethyl‐S‐(3,5‐dimethyl‐4‐hydroxyphenyl)sulfonium salt counterparts. Both types of HPS photoinitiators display reversible photolysis as a result of facile termination reactions that take place between the growing chains ends with the photogenerated sulfur ylides. Preliminary studies have shown that HPS photoinitiators can also be employed as thermal initiators for the cationic ring‐opening polymerization of epoxides at moderate temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2570–2587, 2003     

Electropolymerization of 2,3‐diaminophenol

The optima conditions to electrosynthesize poly(2,3‐diaminophenol) by electro‐oxidation of the monomer were determined, and the electrodeposits obtained characterized by electrochemical methods, UV‐vis, FTIR, conductivity and viscosity measurements. The influence of parameters such as electrolytical medium and electrochemical conditions on the electro‐oxidation of 2,3‐diaminophenol were also investigated. It has been established that appropriate deposits are obtained only when very anhydrous acetonitrile is used as solvent. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1698–1703, 2000     

Novel substituted epoxide initiators for the carbocationic polymerization of isobutylene

This article presents the first detailed account of the discovery that substituted epoxides can initiate the carbocationic polymerization of isobutylene. α‐Methylstyrene epoxide (MSE), 2,4,4‐trimethyl‐pentyl‐epoxide‐1,2 (TMPO‐1), 2,4,4‐trimethyl‐pentyl‐epoxide‐2,3 (TMPO‐2), and hexaepoxi squalene (HES) initiated isobutylene polymerization in conjunction with TiCl₄. MSE, TMPO‐2, and HES initiated living polymerizations. A competitive reaction mechanism is proposed for the initiation and propagation. According to the proposed mechanism, initiator efficiency is defined by the competition between the S_N1 and S_N2 reaction paths. A controlled initiation with external epoxides such as MSE should yield a primary hydroxyl head group and a tert‐chloride end‐group. The presence of tert‐chloride end‐groups was verified by NMR spectroscopy, whereas the presence of primary hydroxyl groups was implied by model experiments. Multiple initiation by HES was verified by diphenyl ethylene end‐capping and NMR analysis; the resulting star polymer had an average of 5.2 arms per molecule. A detailed investigation of the reaction mechanism and the characterization of the polymers are in progress. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 444–452, 2000     

新型引发转移终止剂引发烯类单体活性自由基聚合及共聚合

引发转移终止剂 (Iniferter)是最早实现活性自由基聚合的方法 ,尽管它对聚合过程控制得不是很好 ,但是可聚合单体多 ,能方便地制备接枝和嵌段共聚物 .因此 ,近 2 0年来 ,它一直是高分子合成化学领域的一个研究热点 ,许多新颖结构的引发转移终止剂被合成并用于制备端基功能化聚合物、遥爪聚合物、大分子单体以及接枝和嵌段聚合物等 .本文扼要综述了引发转移终止剂的发展 ,着重综述了我们研究组在C—C键型高活性热引发转移终止剂、新的光引发转移终止剂、可聚合光引发转移终止剂、新型多功能引发转移终止剂和大分子光引发转移终止剂 5个方面的研究进展     

Synthesis of well‐defined naphthalene and photo‐labile group‐labeled polystyrene via ATRP

The atom transfer radical polymerizations of styrene were successfully carried out in bulk and solution, respectively, at 115 °C, with a novel photoiniferter reagent, (1‐naphthyl)methyl N,N‐diethyldithiocarbamate (NMDC), as an initiator in the presence of copper (I) bromide and N,N,N′,N″,N″‐pentamethyldiethylenetriamine. The results showed that NMDC was an effective initiator with high initiation efficiency for ATRP of St. The polymerization rate was first‐order with respect to the monomer concentration and the molecular weights of the obtained polystyrene (PS) increased linearly with the monomer conversion, with very narrow molecular weight distributions (M_w/M_n = 1.07–1.29). The functionalized naphthalene‐labeled PS bearing N,N‐(diethylamino)dithiocarbamoyl group which was confirmed by ¹H NMR analysis, and chain extension of the PS exhibited fluorescence and ultraviolet absorption in chloroform (CHCl₃). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 510–518, 2006     

“Living” radical polymerization of methyl methacrylate with diethyl 2,3-dicyano-2,3-diphenylsuccinate as a thermal iniferter

The bulk polymerization of methyl methacrylate (MMA) initiated with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS) was studied. This polymerization showed some “living” characteristics; that is, both the yield and the molecular weight of the resulting polymers increased with reaction time, and the resultant polymer can be extended by adding MMA. The molecular weight distribution of PMMA obtained at high conversion is fairly narrow (M_w/M_n = 1.24≈1.34). It was confirmed that DCDPS can serve as a thermal iniferter for MMA polymerization by a “living” radical mechanism. Furthermore, the PMMA obtained can act as a macroinitiator for radical polymerization of styrene (St) to give a block copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4610–4615, 1999     

Synthesis and fluorescent properties of model compounds for conjugated polymer containing maleimide units at the main chain

2,3‐Diaryl substituted maleimides as model compounds of conjugated maleimide polymers [poly(RMI‐alt‐Ar) and poly(RMI‐co‐Ar)] were synthesized from 2,3‐dibromo‐N‐substituted maleimide (DBrRMI) [R= cyclohexyl (DBrCHMI) and n‐hexyl (DBrHMI)] and aryl boronic acid using palladium catalysts. To clarify structures of conjugated polymer containing maleimide units at the main chain, ¹³C NMR spectra of 2‐aryl or 2,3‐diaryl substituted maleimides were compared with those of N‐substituted maleimide polymers. Copolymers obtained with DBrRMI via Suzuki‐Miyaura cross‐coupling polymerizations or Yamamoto coupling polymerizations were dehalogenated structures at the terminal end. This dehalogenation may contribute to the low polymerizability of DBrRMIs. On the other hand, the π‐conjugated compounds showed high solubility in common organic solvents. The N‐substituents of maleimide cannot significantly affect the photoluminescence spectra of 2,3‐diaryl substituted maleimides derivatives. The fluorescence spectra of poly(RMI‐alt‐Ar) and poly(RMI‐co‐Ar) varied with N‐substituents of the maleimide ring. When exposed to ultraviolet light of wavelength 352 nm, a series of 1,4‐phenylene‐ and/or 2,5‐thienylene‐based copolymers containing N‐substituted maleimide derivatives fluoresced in a yellow to blue color. It was found that photoluminescence emissions and electronic state of π‐conjugated maleimide derivatives were controlled by aryl‐ and N‐substituents, and maleimide sequences of copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Sulfonic acids as water‐soluble initiators for cationic polymerization in aqueous media with Yb(OTf)3

Aqueous sulfonic acids (HOSO₂R; R = CH₃, Ph‐p‐CH₃, and Ph‐p‐NO₂), coupled with a water‐tolerant Lewis acid, ytterbium triflate [Yb(OTf)₃; OTf =  OSO₂CF₃], initiate the cationic suspension polymerization of p‐methoxystyrene (pMOS) in heterogeneous aqueous media. They induce controlled polymerization of pMOS at 30 °C, and the molecular weights of the polymers (weight‐average molecular weight/number‐average molecular weight ∼ 1.7) increase with conversion. These suspension polymerizations are initiated by the entry of sulfonic acid from the aqueous phase into the organic phase and proceed via reversible activation of the sulfonyl terminus by the Lewis acid. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2728–2733, 2000     

Chemoselective synthesis of polyamides containing hydroxyl and amino substituents by direct polycondensation

A convenient method for the synthesis of polyamides containing hydroxyl and amino substituents on the aromatic rings of the backbones was developed. These polymers were prepared readily by the chemoselective polycondensation of dicarboxylic acids with diamines with hydroxyl and amino functional groups via the activating agent diphenyl(2,3‐dihydro‐2‐thioxo‐3‐bezoxazolyl)phosphonate. The model reactions were studied in detail to demonstrate the feasibility of chemoselective polycondensation. The direct polycondensation of 5‐hydroxy or 5‐aminoisophthalic acid with 4,4′‐diamino‐4″‐hydroxytriphenylmethane proceeded smoothly under mild conditions and produced the desired polyamides with inherent viscosities up to 0.73 dL · g⁻¹. The polymers obtained were characterized by IR, ¹H NMR, and ¹³C NMR spectroscopies. The polymers were readily soluble in aprotic polar solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethyl formamide, and dimethyl sulfoxide. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3875–3882, 2000     

Crosslinking of chlorine‐containing polymers by dicyclopentadiene dicarboxylic salts

Alkali‐ and alkali‐earth‐metal salts of dicyclopentadiene dicarboxylic acid (DCPDCA) were prepared and employed as crosslinkers for chlorine‐containing polymers such as polychloromethylstyrene (PCMS), chlorinated polypropylene (CPP), polyepichlorohydrin (PECH), and poly(vinyl chloride) (PVC). Thermally reversible covalent crosslinks (i.e.,  DCPD bridges) between polymer chains were generated through esterification between the chlorine–carbon bonds of the polymer and the carboxylic salt groups of the crosslinker. The crosslinking reactivity decreased in the following sequence: K > Na > LiDCPDCA > alkali‐earth‐metal salts of DCPDCA. In addition, PCMS and CPP had higher gelation rates than PECH and PVC. Good flowability at about 195 °C and solubility in maleimide‐containing dichlorobenzene on heating indicated that the crosslinked PCMS and CPP exhibited thermally reversible crosslinking because of dimer/monomer (cyclopentadiene) conversion of  DCPD moieties via reversible Diels–Alder cycloaddition. Samples of PECH and PVC crosslinked by the alkali salts of DCPDCA were insoluble even when heated in maleimide‐containing dichlorobenzene. However, these crosslinked polymers could be dissolved partially after the same treatment when the crosslinker was an alkali‐earth‐metal salt of DCPDCA. Thermal degradation such as dehydrochlorination of the PECH and PVC might have been responsible for uncontrolled crosslinking because these two polymers are known to be thermally unstable. The unreacted COOK, COONa, or COOLi of the crosslinkers might have initiated base‐induced dehydrochlorination when PECH and PVC were heated at high temperatures. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 818–825, 2000