Graft copolymers by acyclic diene metathesis and atom transfer radical polymerization techniques

Precise graft copolymer architectures were achieved by combining the macromonomer technique with the acyclic diene metathesis (ADMET) reaction. These well‐defined copolymer structures were the result of proper monomer design before metathesis polymerization. Features such as length of the graft, nature, and concentration of the graft site along the backbone were manipulated via the combination of living atom transfer radical polymerization methods with ADMET chemistry. Furthermore, the physical behavior of these materials was altered such that they presented dissimilar thermal properties of either the homopolymers or random copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2816–2827, 2003     

Synthesis and characterization of oligo(oxyethylene)/carbosilane copolymers for thermoset elastomers via ADMET

Acyclic diene metathesis (ADMET) polymerization has been used to synthesize latent reactive processable elastomers constructed of carbosilane and polyether segments. Two types of latent modes have been introduced: “chain‐internal” and “chain‐end” sites through the use of labile silicon methoxy functionalities. These latent reactive groups are inert when exposed to metathesis conditions allowing formation of the linear copolymer; subsequently exposure to moisture triggers hydrolysis of the methoxy groups and formation of a chemically crosslinked thermoset. The thermoset's mechanical response can be potentially varied from plastic to elastic behavior, depending on the ratio of carbosilane and oligooxyethylene monomers employed. Different lengths of glycols and numbers of methylene groups between them in the polymer backbone have been investigated to explore structure/property relationship. Polymers composed of oligooxyethylenes with eight methylene groups in between them exhibited fully amorphous character, while the ones with up to 20 methylene groups between glycol units showed their semicrystalline nature. The concentration of “chain‐internal” and “chain‐end” crosslink sites enhances strength; modification to the run length and structure of the soft phase enhances elasticity. Resultant materials have been subjected to mechanical tests using Instron; generated stress/strain curves have shown plastic and elastic behavior. Depending on the composition obtained samples have shown moduli from 0.3 to 115 MPa, tensile strengths from 0.6 to 10 MPa and elongations from 20 to 700%. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3992–4011, 2008     

Phosphorus‐containing renewable polyester‐polyols via ADMET polymerization: Synthesis,functionalization, and radical crosslinking

An α,ω‐diene containing hydroxyl groups was prepared from plant oil‐derived platform chemicals. The acyclic diene metathesis copolymerization (ADMET) of this monomer with a phosphorus‐containing α,ω‐diene (DOPO II), also plant oil derived, afforded a series of phosphorus containing linear polyesters, which have been fully characterized. The backbone hydroxyls of these polyesters have been acrylated and radically polymerized to produce crosslinked polymers. The thermomechanical and mechanical properties, the thermal stability, and the flame retardancy of these phosphorus‐based thermosets have been studied. Moreover, methyl 10‐undecenoate has been used as chain stopper in selected ADMET polymerizations to study the effect of the prepolymers' molecular weights on the different properties of the final materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1649–1660, 2010     

Fatty acid derived phosphorus‐containing polyesters via acyclic diene metathesis polymerization

The acyclic diene metathesis (ADMET) polymerization of a phosphorus‐containing α,ω‐diene prepared from a plant oil derived building block is reported. Different ruthenium based metathesis catalysts and conditions were tested to optimize the ADMET polymerization of this monomer. Undecylenyl undecenoate was used as fully renewable comonomer to obtain polyesters with different phosphorus contents and to increase the renewable content of the final polymers. Copolymerization caused marked variations in the molecular weights leading to polyesters from 6 to 38 KDa. The effect of the ADMET polymerization temperature in the thermal properties of the copolymers was studied and their thermal degradation and flame retardant properties were evaluated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5760–5771, 2009     

Facile synthesis of linear–hyperbranched polyphosphoesters via one‐pot tandem ROMP and ADMET polymerization and their transformation to architecturally defined nanoparticles

A convenient one‐pot synthesis of linear–hyperbranched polyphosphoesters (l–HBPPEs) was accomplished by a tandem ring‐opening metathesis polymerization (ROMP) and acyclic diene metathesis (ADMET) polymerization procedure. A linear monotelechelic poly(norbornene) with a terminal acrylate and many pendent thiol groups is first prepared through adding an internal cis‐olefin terminating agent to the reaction mixture immediately after the completion of the living ROMP, and then utilized as a macromolecular chain stopper in subsequent ADMET polymerization of a phosphoester functional AB₂ monomer, yielding l–HBPPEs as the reaction time prolonged. These l–HBPPEs bearing lots of pendent thiol groups in linear poly(norbornene) and peripheral acrylate groups in HBPPE could be self‐crosslinked in ultradilute solution through thiol‐Michael addition click reaction between acrylate and thiol to give single‐molecule nanoparticles with comparatively uniform size. This facile approach can be extended toward the fabrication of novel nanomaterials with sophisticated structures and tunable multifunctionalities. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 964–972     

A “click” approach to ROMP block copolymers

Amphiphilic block copolymers can be conveniently prepared via convergent syntheses, allowing each individual polymer block to be prepared via the polymerization technique that gives the best architectural control. The convergent “click‐chemistry” route presented here, gives access to amphiphilic diblock copolymers prepared from a ring opening metathesis polymer and polyethylene glycol. Because of the high functional group tolerance of ruthenium carbene initiators, highly functional ring opening metathesis polymerization (ROMP) polymer blocks can be prepared. The described synthetic route allows the conjugation of these polymer blocks with other end‐functional polymers to give well‐defined and highly functional amphiphilic diblock copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2913–2921, 2008     

Precision branching in ethylene copolymers: Synthesis and thermal behavior

Acyclic diene metathesis polymerization allows the synthesis of sequenced polyethylene copolymers via step-growth propagation, thereby avoiding the inherent side reactions associated with chain polymerization. Here we review the synthesis and thermal behavior of ADMET polyethylene (PE) as well as ethylene/propylene (EP), ethylene/butene (EB), ethylene/octane (EO), and ethylene/vinyl ether (EVE) copolymers prepared by ADMET. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4981–4989, 2006     

Solid polymer electrolytes I,preparation, characterization,and ionic conductivity of gelled polymer electrolytes based on novel crosslinked siloxane/poly(ethylene glycol) polymers

A series of crosslinked siloxane/poly(ethylene glycol) (Si–PEG) copolymers were synthesized from the reactive methoxy‐functional silicone resin (Si resin) and PEGs with different molecular weights via two kinds of crosslinking reactions during an in situ curing stage. One of the crosslinking reactions is the self‐condensation between two methoxy groups in the Si resin, and another one is an alkoxy‐exchange reaction between the methoxy group in the Si resin and the OH group in PEG. The synthesized crosslinked copolymers were characterized by Fourier transform infrared spectroscopy, DSC, and ¹³C NMR. The crosslinked copolymers were stable in a moisture‐free environment, but the Si? O? C linkages were hydrolyzed in humid conditions. The gel‐like solid polymer electrolytes (SPEs) were prepared by impregnating these crosslinked Si–PEG copolymers in a propylene carbonate (LiClO₄/PC) solution. The highest conductivity reached 2.4 × 10^?4 S cm^?1 at 25 °C and increased to 8.7 × 10^?4 S cm^?1 at 85 °C. The conductivities of these gel‐type SPEs were affected by the content of LiClO₄/PC, the molecular weights of PEGs, and the weight fraction of the Si resin. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2051–2059, 2004     

All hydrocarbon main‐chain thermotropic liquid crystalline polymers,poly(1,1′‐biphenylene‐4,4′‐alkenediyl)s,prepared by the ADMET method and their hydrogenated polymers,poly(1,1′‐biphenylene‐4,4′‐alkanediyl)s

A series of poly(4,4′‐biphenylenealkenylene)s and copolymers were prepared by the acyclic diene metathesis (ADMET) polymerization of 4,4′‐bis(alkenylene)1,1′‐biphenyls. Unsaturated polymers thus prepared were then hydrogenated to produce the corresponding saturated polymers. All the polymers were found to be thermotropic and to form solidlike smectic phases in melt. Their liquid crystallinity (LC) was studied by differential scanning calorimetry (DSC), X‐ray diffractometry, and polarizing microscopy. We observed that one of the phenylene units of the biphenyl structure could selectively be hydrogenated at an elevated temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1335–1349, 2004     

Hyperbranched polyphosphoesters with reactive end groups synthesized via acyclic diene metathesis polymerization and their transformation to crosslinked nanoparticles

A novel hyperbranched polyphosphoester (HBPPE) was prepared by acyclic diene metathesis (ADMET) polymerization of an AB₂ monomer using the second‐generation Hoveyda–Grubbs catalyst. IR analysis, gel permeation chromatography with multiangle laser light scattering, and NMR spectroscopy confirmed their controlled synthesis. The effect of the ADMET polymerization time in the thermal properties of HBPPEs was studied and their thermal degradation and flame‐retardant properties were evaluated. These reactive HBPPEs were used to synthesize polyphosphoesters nanoparticles by intramolecular crosslinking of the end acrylate groups in dilute solution. The successful preparation of this new type of polymer nanoparticles was proven by NMR spectroscopy and gel permeation chromatography. The morphologies of nanostructures were investigated via dynamic light scattering, atom force microscopy, and transmission electron microscopy. The results revealed that the crosslinked nanoparticles, which have a comparatively uniform size, were stable and reproducible in organic solvents. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4331–4340     

ADMET: Metathesis polycondensation

Although it is well known that Acyclic Diene METathesis (ADMET) describes an olefin metathesis polymerization mode that relies on double‐bond substituent interchange of a diolefin, the story behind its discovery is not. The story is divulged here. Olefin metathesis has a rich history dating to the 1950s, but the one particular metathesis mode mentioned, ADMET, has more recent historical roots. ADMET polymerization is easy to do and highlighted here are the particular reaction details for success. Additionally, the most recent advances from the past 5 years are detailed, exemplifying this reaction's wide utility from fundamental structure–property studies to multiple advanced applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and thermal crosslinking of carbosiloxane and oligo(oxyethylene) polymers

Acyclic diene metathesis (ADMET) polymerization has been used in the synthesis of telechelic materials using alkoxy‐functionalized carbosiloxane or oligo(oxyethylene)‐based polymers, varying from internal to terminal cured materials or the combination of them. Previous investigations demonstrated that introduction of chain‐end crosslinking improves the stress–strain behavior of such materials. A series of saturated and unsaturated carbosiloxane and oligo(oxyethylene)‐based polymers were synthesized by ADMET polymerization using silacyclobutane as chain‐end, thermally induced crosslinker. The carbosiloxane derivatives presented pure amorphous behavior, whereas the oligo(oxyethylene) polymers were semicrystalline. The thermal curing process was monitored by differential scanning calorimetry via the exotherm between 160 and 210 °C. Mechanical properties on thermoset polymers were measured, where cured polymers showed moduli from 0.6 to 9.3 MPa, tensile strengths from 0.3 to 1.0 MPa, and elongations from 12 to 76%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

UV‐induced crosslinking of ring opening metathesis block copolymer micelles

Statistical and amphiphilic block copolymers bearing cinnamoyl groups were prepared by ring opening metathesis polymerization (ROMP). The UV‐induced [2 + 2] cycloaddition reaction of polymer bound cinnamic acid groups was studied in polymer thin films as well as in block copolymer micelles. In both cases, exposure to UV‐light for 10 min led to a crosslinking conversion of about 60%, as determined by FT‐IR spectroscopy and UV–vis absorption measurements. Time based IR‐spectroscopy revealed a maximum conversion of 78% reached after an irradiation time of about 16 min. For micelles obtained from polymers bearing 5 mol % or more cinnamoyl groups, the crosslinking reaction proceeded smoothly, yielding in crosslinked particles which were stable in a non‐selective solvent (CHCl₃). Diameters determined by dynamic light scattering in the selective solvent (MeOH) were similar for both, non‐crosslinked and crosslinked micelles, whereas diameters of crosslinked micelles in the non‐selective solvent (CHCl₃) were significantly larger compared to MeOH samples. This strategy of direct self assembly of block‐copolymers in a selective solvent followed by “clean” crosslinking, without the need for additional crosslinking reagents or crosslinking initiators, provides a straight forward approach toward ROMP‐based polymeric nano‐particles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2402–2413, 2008     

Synthesis of polyethylene oxide graft polysilylenes and networks based on poly(di‐n‐pentylsilylene/n‐pentyloct‐7‐enyl) copolymers

Poly(dipentylsilylene) copolymers containing n‐pentyl‐n‐oct‐7‐enylsilane units were prepared by reductive coupling of the corresponding dichlorosilanes. Linear high molecular weight and some crosslinked polymer were obtained. The soluble products exhibited optical and thermal properties like poly(dipentylsilylene). Differential scanning calorimetry was used to investigate crystallization and to monitor thermal crosslinking. Vinyl functionalized side chains were hydrosilylated with dipentylsilane and dimethylchlorosilane and crosslinked via the side chains. Hydrosilylation with di‐n‐pentyl(trimethylsiloxypropyl)silane led to a partial hydroxy functionalization of the polysilylene and enabled anionic PEO grafting of the poly(dipentylsilylene). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2306–2318, 2000     

Chain internal/chain end latent crosslinking in thermoset polymer systems

The combination of both chain‐internal/chain‐end latent crosslinking in a single thermoset polymer system is the subject of this study. A series of linear carbosiloxane/hydrocarbon homopolymers were synthesized by metathesis polycondensation, polymers which serve as the soft phase in the target chain‐internal/chain‐end latent crosslinked materials. These carbosiloxane/hydrocarbon “soft phase” homopolymers exhibited excellent performance parameters, displaying purely amorphous character with glass transition temperatures ranging between ?104 °C and ?90 °C depending on the run length of siloxane or hydrocarbon methylene units within the carbosiloxane/hydrocarbon monomer. These soft phase monomers were then copolymerized with latent chain‐internal crosslinking carbosilane monomers in the presence of latent chain‐end crosslinking molecules thereby generating a new class linear copolymers capable of being moisture cured to produce a new class of silicon‐based thermoset systems. Mechanical properties of these thermosets, show breaking strengths up to 0.5 MPa and elongations up to 100%. Both elastic and plastic behavior can be observed in such systems, depending upon the molar ratio of carbosiloxane/hydrocarbon co‐monomer and the carbosilane co‐monomer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1866–1877, 2010     

Synthesis,characterization, and applications in photovoltaic cells of oxetane‐functionalized P3HT derivatives

Several crosslinkable oxetane‐functionalized copolymers, containing regio‐regular segments of 3‐hexylthiophene, are synthesized using the Grignard metathesis polymerization. The optical and electrochemical properties of the new polymers, both in the soluble and crosslinked forms, are reported. These polymers are used in the preparation of organic photovoltaics upon blending with PCBM as electron‐acceptor. The effect of the crosslinking of these copolymers, once the blend films are formed, on the devices performance is also studied. In particular, the insertion of the oxetane‐functionalized thiophene comonomers leads to a decrease of the devices performance, which is further decreased upon crosslinking of the copolymer. However, the stability of the devices overall improves upon crosslinking of the copolymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 652–663     

ABA triblock copolymers with a ring‐opening metathesis polymerization/macromolecular chain‐transfer agent approach

Block copolymers containing polystyrene and polycyclooctene were synthesized with a ring‐opening metathesis polymerization/chain‐transfer approach. Polystyrene, containing appropriately placed olefins, was prepared by anionic polymerization and served as a macromolecular chain‐transfer agent for the ring‐opening metathesis polymerization of cyclooctene. These unsaturated polymers were subsequently converted to the corresponding saturated triblock copolymers with a simple heterogeneous catalytic hydrogenation step. The molecular and morphological characterization of the block copolymers was consistent with the absence of significant branching in the central polycyclooctene and polyethylene blocks [high melting temperatures (114–127 °C) and levels of crystallinity (17–42%)]. A dramatic improvement in both the long‐range order and the mechanical properties of a microphase‐separated, symmetric polystyrene–polycyclooctene–polystyrene block copolymer sample was observed after fractionation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 361–373, 2007     

Photo‐induced thiol‐ene polysulfide‐crosslinked materials with tunable thermal and mechanical properties

Photo‐induced thiol‐ene crosslinked polymeric networks have been extensively explored in constructing a variety of new materials with enhanced mechanical properties for optical, biomedical, and sensing applications. Toward the broad applications, however, tunable mechanical properties are greatly desired. Here, an effective approach utilizing high‐molecular‐weight methacrylate copolymers having pendant thiol and vinyl groups (MCPsh and MCPenes) to modulate thermal and mechanical properties of photo‐induced thiol‐ene crosslinked materials is reported. The MCP copolymers are synthesized by an industrially friendly polymerization method, followed by post‐modification including either a facile coupling reaction or reductive cleavage. Upon UV irradiation, thiol‐ene reactive blends of MCPsh and MCPenes yield highly crosslinked materials through the formation of flexible sulfide linkages. These polysulfide‐crosslinked materials based on rigid MCP backbones exhibit enhanced mechanical properties. Further, their thermal and mechanical properties are tuned by modulating monomer compositions of MCPs as well as varying numbers of pendant SH or vinyl groups (i.e., extent of crosslinking densities). This approach is versatile and effective for development of high performance polymeric materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3060–3068     

Epoxy‐based networks combining chemical and supramolecular hydrogen‐bonding crosslinks

We combine the supramolecular chemistry of heterocyclic ureas with the chemistry of epoxides to synthesize new crosslinked materials incorporating both chemical and supramolecular hydrogen‐bonded links. A two‐step facile and solvent‐free procedure is used to obtain chemically and thermally stable networks from widely available ingredients: epoxy resins and fatty acids. The density of both chemical and physical crosslinks is controlled by the stoichiometry of the reactants and the use of a proper catalyst to limit side reactions. Depending on the stoichiometry, a wide range of thermomechanical properties can be attained. The method can be used to produce elastomeric objects of complex shapes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1133–1141, 2010     

New photo‐induced thiol‐ene crosslinked films based on linear methacrylate copolymer polythiols

Thiol‐ene radical addition by photolysis is a highly efficient click reaction of sufhydryl groups with reactive enes that has been extensively explored as a promising means to construct multifunctional materials. Here, photo‐induced thiol‐ene crosslinked films composed of linear methacrylate copolymer polythiols (MCPsh) are reported. Well‐defined MCPsh copolymers were prepared by thiol‐responsive cleavage of pendant disulfide linkages positioned in the corresponding methacrylate copolymers with narrow molecular weight distribution which were synthesized by a controlled radical polymerization method. With a commercially available multifunctional acrylate as a model ene, photo‐induced thiol‐ene radical polyaddition of these polythiols is competitive to free‐radical homopolymerization of acrylates, yielding crosslinked films exhibiting rapid cure, uniform network, and enhanced mechanical properties; these properties are required for high performance coating materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2860–2868.