Self‐reinforcing hydrogels comprised of hydrophobic methyl methacrylate macromers copolymerized with N,N‐dimethylacrylamide

Methyl methacrylate macromers were synthesized by a catalytic chain‐transfer polymerization, with number‐average molecular weight values ranging from 600 to 26,000. These macromers subsequently were copolymerized with dimethyl acrylamide in bulk by γ radiation to yield transparent xerogel materials. The copolymerization was confirmed by NMR analyses and by subsequent aqueous extractions of the resultant copolymers. On swelling in deionized water, hydrogels were formed that had significantly higher Young's moduli than hydrogels based on statistical methyl methacrylate/dimethyl acrylamide copolymers of equivalent composition. If macromers of high molecular weight were used, phase separation occurred, resulting in opaque hydrogel compositions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 810–817, 2000     

Synthesis of telechelic polymers initiated with selected functional groups by catalytic chain transfer

Catalytic chain transfer is found to be useful for making telechelic oligomers with a variety of initiating groups in a one‐step reaction procedure. Two olefinic components are required, the first being a normal free‐radical‐polymerizable monomer such as a methacrylate. The second is a vicinal or other olefin generally considered to be unreactive in free radical polymerizations. Under conditions of radical polymerization in the presence of a CCT catalyst, the copolymer that results incorporates predominantly one molecule of the second component at the initiation of each polymer chain. The terminal end group is a geminal double bond. This geminal‐disubstituted end group is radically polymerizable and would allow the preparation of functionalized arms on graft polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1911–1918, 2000     

Evolution of molecular weight distributions in the catalytic chain transfer polymerization of methyl methacrylate up to high monomer conversions

The evolution of molecular weight distributions (MWDs) with monomer conversion in the catalytic chain transfer (CCT) polymerization of methyl methacrylate at 60 °C is investigated by simulation (via the program package PREDICI®) and experiment. A Co(III)‐based complex is used as the precursor for the CCT agent, which is formed in situ by initiator‐derived (2,2′‐azobisisobutyronitrile) radicals to yield the catalytically active Co(II) species. The small shifts seen in the MWD toward lower molecular weights with increasing monomer conversion are shown to be of the same order of magnitude as the associated changes in the MWD in non‐CCT controlled free‐radical polymerization, indicating that no significant change in the MWD with monomer conversion is associated with the CCT process. These results are compared to the evolution of MWDs in conventional chain transfer polymerizations with thiols as transfer agents. A clear shift toward higher molecular weights is seen with increasing monomer conversion, indicating disparate rates of thiol and monomer consumption. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3303–3312, 2000     

Immortal polymerization: The outset,development, and application

The story of the outset of the concept of immortal polymerization is presented. Immortal polymerization is the polymerization that gives polymers with a narrow molecular distribution, even in the presence of a chain transfer reaction, because of its reversibility, which leads to the revival of the polymers once dead, that is, the immortal nature of the polymers. As a result, immortal polymerization can afford polymers with a controlled molecular weight, the number of polymer molecules being more than that of the initiator. The compound that plays a leading role is metalloporphyrin, in which the metal‐axial ligand bond has an unusually high reactivity. Immortal polymerization can be carried out in the ring‐opening polymerizations of epoxides, episulfides, and lactones by the selection of an appropriate metalloporphyrin as the initiator and a protic compound as the chain transfer agent. Immortal polymerization is an effective method for synthesizing end‐functional polymers and oligomers with narrow molecular weight distributions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2861–2871, 2000     

Oligomer formation in the emulsifier‐free emulsion polymerization of styrene

The formation of oligomers in emulsifier‐free emulsion polymerization of styrene was characterized by means of gel permeation chromatography and surface tension measurements. GPC analysis showed incessant oligomer formation throughout the emulsion polymerization process. Oligomers spanned a molecular weight range of 200–1,500, have an M̄_w of 800–900, an M̄_n of 600–800 and a polydispersity index of 1.3. On average, the oligomers contain 4 to 6 styrene units. UV detection could not be utilized to acquire the weight ratio of oligomers to polymers without correction. Combination was the major mode of termination of free radicals in the aqueous phase, but disproportionation was not negligible: for every three‐combination reactions there was about 1 disproportionation. Surface tension measurements showed that oligomers minimized the surface tension of the latex at about 50 min reaction to only 30 mN/m. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1323–1336, 2000     

New Methacryloxy N‐Vinyl‐2‐pyrrolidinone‐ and Lactone‐Based Macromers

New ω‐methacryloxy‐terminated N‐vinyl‐2‐pyrrolidinone oligomers were prepared by reaction of the corresponding ω‐hydroxy‐terminated N‐vinyl‐2‐pyrrolidinone oligomers with 2‐[(1‐imidazolyl)formyloxy] ethyl methacrylate (HEMA‐Im). The oligomeric precursor had been obtained by radical chain transfer polymerization making use of isopropoxyethanol as a solvent and a chain transfer agent. α,ω‐Dimethacryloxy‐terminated ε‐caprolactone and δ‐valerolactone oligomers were also prepared by reaction of their α‐hydroxy‐ω‐methacryloxy‐terminated precursors with HEMA‐Im. These had been in turn synthesized by ring‐opening polymerization of the corresponding lactones in the presence of 2‐hydroxyethyl methacrylate as the initiator and tin octanoate as the catalyst. Due to the presence of methacrylic functions at their chain ends, both VP and lactone oligomers participate in radical polymerization reactions and can be therefore classified as radical macromers. Both macromer families have several potential applications, such as use in the synthesis of mixed hydrophilic/hydrophobic hydrogels. All macromers were characterized by NMR spectroscopy and size‐exclusion chromatography (SEC). The polymerization kinetics of the lactone macromers were also analyzed by ¹H NMR spectroscopy.     

Iniferter concept and living radical polymerization

Iniferters are initiators that induce radical polymerization that proceeds via initiation, propagation, primary radical termination, and transfer to initiator. Because bimolecular termination and other transfer reactions are negligible, these polymerizations are performed by the insertion of the monomer molecules into the iniferter bond, leading to polymers with two iniferter fragments at the chain ends. The use of well‐designed iniferters would give polymers or oligomers bearing controlled end groups. If the end groups of the polymers obtained by a suitable iniferter serve further as a polymeric iniferter, these polymerizations proceed by a living radical polymerization mechanism in a homogeneous system. In these cases, the iniferters (C S bond) are considered a dormant species of the initiating and propagating radicals. In this article, I describe the history, ideas, and some characteristics of iniferters and living radical polymerization with some iniferters that contain dithiocarbamate groups as photoiniferters and several compounds as thermal iniferters. From the viewpoint of controlled polymer synthesis, iniferters can be classified into several types: thermal or photoiniferters; monomeric, polymeric, or gel iniferters; monofunctional, difunctional, trifunctional, or polyfunctional iniferters; monomer or macromonomer iniferters; and so forth. These lead to the synthesis of various monofunctional, telechelic, block, graft, star, and crosslinked polymers. The relations between this work and other recent studies are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2121–2136, 2000     

Photoinitiated cationic oligomerization of aryl 1-propenyl ethers

A series of aryl 1-propenyl ethers (ArPE) were prepared by the isomerization of the corresponding allyl aryl ethers (AArE) and used for photoinduced cationic polymerization studies. Attempted polymerization reactions using diaryliodonium salts as photoinitiators generally resulted in low yields of oligomers. Further studies revealed that these compounds have much lower reactivity in cationic vinyl polymerization as compared to their alkyl analogues. Moreover, side reactions resulting from chain transfer due to Friedel–Crafts alkylations take place and compete with vinyl polymerization. These side reactions are responsible for the low molecular weights observed in the cationic photopolymerization of aryl 1-propenyl ether monomers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3017–3025, 1999     

Characterization of a series of phenyl‐capped vinyl‐terminated oligomers of styrene

Low molecular weight (MW) polystyrenes were synthesized by radical polymerization in the presence of catalytic chain‐transfer agents. Synthetic conditions are controlled to produce molecules containing one methyl group at one end as well as a double bond at the other end, capped with a phenyl group. Individual oligomers were separated by liquid chromatography, and the properties were analyzed using NMR, ultraviolet–visible (UV–vis) spectroscopy, and size exclusion chromatography with light scattering. The UV–vis spectra, proton NMR spectra, and differential refractive‐index increments exhibit an MW dependence of up to six–eight monomer units. The obtained dependencies can be used for precise characterization of the molecular weight distribution of polystyrene obtained by catalytic chain transfer. The double‐bonded end groups were found to be exclusively in the transconfiguration for all oligomers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1099–1105, 2001     

Polymerization of vinyl monomers photoinitiated by p‐nitroaniline: Photoinitiation mechanism

The polymerization rate of methyl methacrylate photoinitiated by p‐nitroacetanilide in the presence of triethylamine was measured as a function of the amine concentration in different media. The polymerization is more efficient in nonpolar medium (benzene/monomer). ESR studies show the formation of a nitro and an amino free radical, which are formed by photoinduced proton transfer from the amine to the nitro group. The amine radical is the active species that adds to the monomer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2269–2273, 2000     

The competitive ablation and polymerization (CAP) principle and the plasma sensitivity of elements in plasma polymerization and treatment

The competitive ablation and polymerization (CAP) principle relates the ablation of materials in plasma to the deposition of materials in plasma. Plasma polymerization and plasma treatment cannot be elucidated without consideration of the fragmentation of molecules in both the gas and solid phases. The general fragmentation tendency follows a plasma sensitivity series of the elements involved that is based on element electronegativity. When consecutive plasma treatments, sequential plasma polymerization, or a combination of plasma treatment and plasma polymerization are carried out in the same reactor, factors that are often not considered in an ordinary individual process become crucial. The CAP principle and the concept of a plasma sensitivity series of the elements explain the rather complicated and interrelated influences of fragmented elements in the plasma deposition of materials. Plasma polymers should be considered a mixture of oligomers and polymeric networks. The oligomer content in a plasma‐polymerized layer is vitally important to the adhesion of the plasma polymer to the substrate as well as to any subsequent coating applied to the layer of the plasma polymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 943–953, 2000     

Effects of hydrogen in ethylene polymerization and oligomerization with magnesium chloride‐supported bis(imino)pyridyl iron catalysts

The effects of hydrogen in ethylene polymerization and oligomerization with different bis(imino)pyridyl iron(II) complexes immobilized on supports of type MgCl₂/AlEt_n(OEt)_3–n have been investigated. Hydrogen has a significant activating effect on polymerization catalysts containing relatively bulky bis(imino)pyridyl ligands, but this is not the case in ethylene oligomerization with a catalyst containing relatively little steric bulk in the ligand. It was found that the presence of hydrogen in the latter system led to decreased activity and an overall increase rather than a decrease in product molecular weight, indicating deactivation of active species producing low molecular weight polymer and oligomer. Decreased formation of vinyl‐terminated oligomers in the presence of hydrogen can therefore contribute to the activating effect of hydrogen in ethylene polymerization with immobilized iron catalysts, if it is assumed that hydrogen activation is related to chain transfer after a 2,1‐insertion of a vinyl‐terminated oligomer into the growing polymer chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4054–4061, 2007     

Kinetics of the seeded semicontinuous emulsion copolymerization of methyl methacrylate and butyl acrylate

The effect of a chain‐transfer agent (CTA) on the kinetics and molecular weight distribution of the methyl methacrylate/butyl acrylate semicontinuous emulsion polymerization was investigated. The dodecanethiol had a slight effect on the reaction rate but significantly affected the secondary nucleation. The effect of the CTA concentration on the gel formation and the effect of the reaction conditions on the mass‐transfer limitations of the CTA are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 367–375, 2000     

Synthesis and properties of novel polyimide/nylon‐6 triblock copolymers

Nylon‐6‐b‐polyimide‐b‐nylon‐6 copolymers were prepared by first synthesizing a series of imide oligomers end‐capped with phenyl 4‐aminobenzoate. The oligomers were then used to activate the anionic polymerization of molten ϵ‐caprolactam. In the block copolymer syntheses, the phenyl ester groups reacted quickly with caprolactam anions at 120 °C to generate N‐acyllactam moieties, which activated the anionic polymerization. In essence, nylon‐6 chains grew from the oligomer chain ends. All of the block copolymers had higher moduli and tensile strengths than those of nylon‐6. However, their elongations at break were much lower. The thermal stability, chemical resistance, moisture resistance, and impact strength were dramatically increased by the incorporation of only 5 wt % polyimide in the block copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4247–4257, 2000     

Cyclic oligomer chemistry

Cyclic oligomers of engineering plastics such as polycarbonate and aromatic polyesters have been known for some time, being formed at very low levels during commercial manufacture. At GE Global Research, we have devised methods for high‐yielding and selective preparation of such cyclic oligomers, that are amenable to commercial manufacture. The mixtures of cyclic oligomers have melting points significantly lower than individual ring sizes, and have very low viscosities in the melt. Ring‐opening polymerization using appropriate initiators affords rapid reactions (2–6 min) without measurable exotherm, providing very high‐molecular‐weight polymers and without reaction byproducts. These materials have been scaled to commercial quantities, and have shown to be extremely useful for fabrication of glass and carbon fiber composites with high‐fiber fractions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1151–1164, 2008     

The discovery and commercialization of group transfer polymerization

Group transfer polymerization (GTP) is a fundamentally new method for polymerization of acrylic monomers, discovered at DuPont over 20 years ago. It allows one to make block and other specialized polymer chain architecture at above ambient temperature. The method uses silyl ketene acetals as initiators and requires a nucleophilic catalyst. DuPont uses the process to make dispersing agents for pigmented inks and automobile finishes. The development of GTP from its discovery to introduction of commercial products is presented. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2855–2860, 2000     

Modular material system for the microfabrication of biocompatible hydrogels based on thiol–ene‐modified poly(vinyl alcohol)

Novel modifications of the synthetic polymer poly(vinyl alcohol) (PVA) were developed for application in the field of biomedical engineering. PVA was modified with allyl succinic anhydride, norbornene anhydride as well as with γ‐thiobutyrolactone to produce macromers with reactive ene and thiol groups, respectively. Cytotoxicity studies have shown that the material exhibits almost no cell‐toxicity, when used in concentrations of 1 and 0.1 wt % for 24 h. The obtained macromers were photocrosslinked via thiol–ene chemistry. Storage stability of the macromer mixtures with different concentrations of pyrogallol as stabilizer were investigated. Photorheometry was employed to optimize mixtures concerning reactivity based on their thiol‐to‐ene ratio, photoinitiator concentration, and macromer content. The crosslinked hydrogels were studied concerning their swellability. To form hydrogels with cellular structure two‐photon‐polymerization (2PP) was employed. Processing windows for 2PP of selected mixtures were determined. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2060–2070     

Confined space regulated polymerization

The confined space produced during the polymerization has access for all small organic molecules or oligomers with small size to enter this confined space; however, it can prevent the macromolecules with big size from entering. Therefore, the reaction between two branched macromolecules is excluded in A₂+B₃ polymerization system, resulting uncrosslinked branched polymers, and there was no gel point observed throughout the polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1730–1737, 2008     

Kinetics of the styrene emulsion polymerization using n‐dodecyl mercaptan as chain‐transfer agent

The kinetics of the styrene emulsion polymerization using n‐dodecyl mercaptan as chain‐transfer agent was studied. It was found that the chain‐transfer agent (CTA) had no effect on polymerization rate but substantially affected the molecular weight distribution (MWD). The efficiency of the CTA in reducing the MWD was lowered by the mass‐transfer limitations. The process variables affecting CTA mass transfer were investigated. A mathematical model for the process was developed. The outputs of the model include monomer conversion, particle diameter, number of polymer particles, and number‐average and weight‐average molecular weights. The model was validated by fitting the experimental data. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4490–4505, 2000