Polymerization of vinyl monomers using a novel trifunctional iniferter

A novel trifunctional iniferter with photoinduced and thermal chemical dissociation functional groups in one molecule, diethyl 2,3‐dicyano‐2,3‐di(p‐N,N‐diethyldithiocarbamylmethyl)phenylsuccinate (DDDCS), was successfully synthesized. The bulk polymerizations of styrene and methyl methacrylate initiated by DDDCS under UV‐light irradiation and heating, respectively, were studied. The polymerizations proceeded via a living polymerization process in both cases; that is, the conversion and molecular weight of the resulting polymer increased linearly with increased reaction time. The resulting polymers, containing α‐ and ω‐N,N‐diethyldithiocarbamyl end groups, served as macroiniferters for further block copolymerization. Electron paramagnetic resonance studies showed that DDDCS initiated as a photoiniferter under UV‐light irradiation by reversible C S‐bond dissociation and as a thermal iniferter under heating by reversible hexasubstituted C C‐bond dissociation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2115–2120, 2000     

Chemoselective synthesis of polyamides containing hydroxyl and amino substituents by direct polycondensation

A convenient method for the synthesis of polyamides containing hydroxyl and amino substituents on the aromatic rings of the backbones was developed. These polymers were prepared readily by the chemoselective polycondensation of dicarboxylic acids with diamines with hydroxyl and amino functional groups via the activating agent diphenyl(2,3‐dihydro‐2‐thioxo‐3‐bezoxazolyl)phosphonate. The model reactions were studied in detail to demonstrate the feasibility of chemoselective polycondensation. The direct polycondensation of 5‐hydroxy or 5‐aminoisophthalic acid with 4,4′‐diamino‐4″‐hydroxytriphenylmethane proceeded smoothly under mild conditions and produced the desired polyamides with inherent viscosities up to 0.73 dL · g⁻¹. The polymers obtained were characterized by IR, ¹H NMR, and ¹³C NMR spectroscopies. The polymers were readily soluble in aprotic polar solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethyl formamide, and dimethyl sulfoxide. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3875–3882, 2000     

Chemoselective polyesterification by direct polycondensation

A convenient method for the synthesis of polyester‐containing amino substitutes on the aromatic rings of the backbone has been developed. This polyester was prepared by chemoselective polyesterification of isophthalic acid with bisphenol having an amino group in the presence of the condensing agent diphenyl(2,3‐dihydro‐2‐thioxo‐3‐benzoxazolyl)phosphonate ( 1 ) and 1,5‐diazabicyclo[4,3,0]‐5‐nonene as a base. The model reactions were carried out in detail to elucidate appropriate conditions of chemoselective polyesterification. Direct polycondensation of isopthalic acid with 4,4′‐[1‐(4‐aminophenyl)ethylidene]bisphenol proceeded smoothly under mild conditions and produced the desired polyester with a number average molecular weight of 11,000 and M_w/M_n of 2.22. The polymer obtained was characterized by IR, ¹H, and ¹³C NMR spectroscopies. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 78–85, 2001     

A new near‐infrared switchable electrochromic polymer and its device application

A new near‐infrared switchable electrochromic polymer containing carbazole pendant (poly‐SNSC), synthesized by electrochemical polymerization of 2,5‐bis‐dithienyl‐1H‐pyrrole (SNS) main chain, has been prepared. The electrochemical and optical properties of SNSC monomer and its polymer have been investigated. Because of having two different electro‐donor moieties; that is, carbazole and SNS, SNSC gave two separate electrochemical oxidation and also light brown color of the film in the neutral state turn into gray on oxidation. An electrochromic device, contructed in the sandwich configuration [indium tin oxide (ITO)‐coated glass/anodically coloring polymer (poly‐SNSC)//gel electrolyte//cathodically coloring polymer (PEDOT)/ITO‐coated glass] and exhibited a high coloration efficiency (1216 cm² C^–1), a very short response time (about 0.3 s), low driving voltage, and a high redox stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Living/controlled radical polymerization of styrene with a new initiating system: DCDPS/FeCl3/PPh3

The living/controlled radical polymerization of styrene was investigated with a new initiating system, DCDPS/FeCl₃/PPh₃, in which diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS) was a hexa‐substituted ethane thermal iniferter. The polymerization mechanism belonged to a reverse atom transfer radical polymerization (ATRP) process. The polymerization was controlled closely in bulk (at 100 °C) or in solution (at 110 °C) with a high molecular weight and quite narrow polydispersity (M_w/M_n = 1.18 ∼ 1.28). End‐group analysis results by ¹H NMR spectroscopy showed that the polymer was ω‐functionalized by a chlorine atom, which also was confirmed by the result of a chain‐extension reaction in the presence of a FeCl₂/PPh₃ or CuCl/bipy (2,2′‐bipyridine) catalyst via a conventional ATRP process. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 101–107, 2000     

Reverse atom transfer radical polymerization of vinyl monomers with Fe[SC(S)NEt2]3 alone as the catalyst

The living radical polymerization of methyl methacrylate and styrene was successfully carried out with diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS)/ferric tri(diethyldithiocarbamate) as a novel reverse atom transfer radical polymerization initiation system in which DCDPS was a hexa‐substituted ethane‐type thermal iniferter, DC was a diethyldithiocarbamate group, and no additional ligands such as nitrogen‐ or phosphine‐based compounds were required. The bulk polymerization of methyl methacrylate was carried out at 95 °C, and that of styrene was carried out at 120 °C. Poly(methyl methacrylate) and polystyrene (PSt) with high molecular weights and quite narrow molecular weight distributions (as low as 1.09 for PSt) were obtained. ¹H NMR spectroscopy revealed the presence of an α‐(carbethoxycyanophenyl)methyl group from the initiator and an ω‐DC group from the catalyst in the obtained polymers. Various chain‐extension reactions under UV light or thermal treatments were successfully conducted to prove the presence and efficient reinitiating of the ω‐DC group. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3464–3473, 2001     

Synthesis of poly(quinoxaline‐2,3‐diyl)s with alkoxy side chains by aromatizing polymerization of 4,5‐dialkoxy‐substituted 1,2‐ diisocyanobenzenes

Poly(quinoxaline‐2,3‐diyl)s bearing alkoxy pendants was synthesized by living polymerization of 4,5‐dialkoxy‐3,6‐dimethyl‐1,2‐diisocyanobenzenes, which were easily accessible from 3,6‐dimethylcatechol, using organonickel complexes as initiators. Thermal properties of the obtained polymers were fully determined by thermogravimetric analysis and differential scanning calorimetry, exhibiting strong dependence on their side chains. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Electrosynthesis of ambipolar electrochromic polymer films from anthraquinone–triarylamine hybrids

Two ester derivatives featuring anthraquinone as an interior core and terminal electroactive triphenylamine or carbazole groups were prepared by the condensation of 2,6‐dihydroxyanthraquinone with 4‐(diphenylamino)benzoyl chloride and 4‐(9H‐carbazol‐9‐yl)benzoyl chloride, respectively. The electrochemistry and electropolymerization of these monomers were investigated. The polymeric films were built onto ITO/glass surface by repetitive cyclic voltammetry scanning of the monomer solutions containing an electrolyte. The electrogenerated polymer films exhibited reversible electrochemical processes and strong color changes upon electro‐oxidation or electro‐reduction, which can be switched by potential modulation. The remarkable electrochromic behavior of the film was clearly interpreted on the basis of spectroelectrochemical studies, and the electrochromic stability was evaluated by the electrochromic switching studies. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 644–655     

Behavior of a bisphenol‐A‐based polybenzoxazine exposed to ultraviolet radiation

An interaction mechanism for a bisphenol‐A‐based polybenzoxazine resin exposed to ultraviolet radiation is proposed. Fourier transform infrared spectroscopy indicated that a carbonyl‐containing species was formed when cured 6,6′‐bis(2,3‐dihydro‐3‐methyl‐4H‐1,3‐benzoxazinyl)isopropylidene (BA‐m) resin was exposed to ultraviolet radiation (λ > 290 nm) in the presence of ambient air at room temperature. The isopropylidene linkage was the reactive site of cleavage and oxidation. It was apparent from model compound studies that this structure was severed, resulting in the formation of a 2,6‐disubstituted benzoquinone. Model compound studies also demonstrated that the BA‐m polymer backbone structure, the Mannich bridge, which was present in and characterized all the polybenzoxazines, neither cleaved nor oxidized in the presence of ultraviolet radiation in a detectable manner under the conditions of this study. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2687–2701, 2000     

Use of a new methacrylic monomer, 4,4′‐di(2‐hydroxy‐3‐methacryloyloxypropoxy)benzophenone,in the synthesis of porous microspheres

A new aromatic, tetrafunctional methacrylate monomer, 4,4′‐di(2‐hydroxy‐3‐methacryloyloxypropoxy)benzophenone, and its application to the synthesis of porous microspheres are presented. This new monomer was copolymerized with divinylbenzene in the presence of pore‐forming diluents. The properties of the obtained highly crosslinked microspheres were investigated as column packing for high‐performance liquid chromatography. Their porous structures in both dry and wet states were studied and compared with those of poly(divinylbenzene) and the less crosslinked copolymer of 2,3‐epoxypropyl methacrylate and divinylbenzene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7014–7026, 2006     

Synthesis of poly(oligoaniline)s with structures controlled over three different oxidation states

We synthesize poly(oligoaniline)s consisting of multiple oligoaniline units linked by alkane spacers with their structures and properties controlled over three different oxidation states. tert‐Butoxycarbonyl (t‐BOC)‐protected diamino‐oligoanilines are synthesized and polymerized with diisocyanatoalkanes to produce t‐BOC‐protected prepolymers. We obtain the unprotected poly(oligoaniline)s in leucoemeraldine base, emeraldine base, and emeraldine salt oxidation forms by using different deprotection conditions for each of them. Distinct routes to each oxidation form of poly(oligoaniline)s enable exploitation of the crystalline structure, electrochemical activity, or conductivity, which is expected from the oligoaniline‐based materials, as well as their excellent processability into thin films that arises from their polymeric nature. The results suggest that new functional materials based on poly(oligoaniline)s may be derived by developing efficient synthetic procedures to control the oxidation states, promising for creation of new nanostructured materials with electrochemical activities. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Control of helical chirality of poly(quinoxaline‐2,3‐diyl)s based on postpolymerization modification of the terminal group by small chiral molecules

Poly(quinoxaline‐2,3‐diyl)s having a terminal formyl or boronyl group were prepared by living polymerization of 1,2‐diisocyanobenzenes using organopalladium initiators bearing a protected formyl or boronyl group. Poly(quinoxaline‐2,3‐diyl)s were successfully deracemized by reacting them with small optically active molecules at their terminal formyl or boronyl group, leading to the induction of optically active helical structures. Poly(quinoxaline‐2,3‐diyl) having terminal formyl groups was converted to one‐handed helical polymer, in which the screw‐sense excess was 68% (84:16). The helix sense of the boronyl‐terminated poly(quinoxaline‐2,3‐diyl) was reversibly controlled by attaching and removing the chiral group. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Electrochemical Oxidation of Desipramine Drug in the Presence of 4,6‐Dimethylpyrimidine‐2‐thiol Nucleophile in Aqueous Acidic Medium

Electrochemical oxidation of desipramine (DES) has been studied in the presence of 4,6‐dimethylpyrimidine‐2‐thiol (DMPT) as nucleophile in acidic medium by means of cyclic voltammetry, controlled‐potential electrolysis and spectroscopic data, as diagnostic techniques. Voltammetric studies of electro‐oxidation of desipramine were realized in a range of pH 1.0 to 8.0 in the absence and presence of DMPT. The results indicate the participation of the product of electrochemical oxidation of desipramine in the reaction with DMPT with ECEC electrochemical mechanism. However, the voltammetry and coulometry results imply existence of a catalytic (EC′) electrochemical mechanism in parallel with ECEC electrochemical mechanism. The product has been characterized by IR, ¹H NMR, ¹³C NMR and MS methods.     

Syntheses,Structures, and Electrochemical Properties of Two Bis‐triazole‐bis‐amide‐based Copper(II) Pyridine‐2,3‐dicarboxylate Coordination Polymers

Abstract. Two bis‐triazole‐bis‐amide‐based copper(II) pyridine‐2,3‐dicarboxylate coordination polymers (CPs), [Cu(2,3‐pydc)(dtb)_0.5(DMF)] · 2H₂O ( 1 ) and [Cu(2,3‐pydc)(dth)_0.5(DMF)] · 2H₂O ( 2 ) (2,3‐H₂pydc = pyridine‐2,3‐dicarboxylic acid, dtb = N,N′‐bis(4H‐1,2,4‐triazole)butanamide, and dth = N,N′‐bis(4H‐1,2,4‐triazole)hexanamide), were synthesized under solvothermal conditions. CPs 1 and 2 show similar two‐dimensional (2D) structures. In 1 , the 2,3‐pydc anions bridge the Cu^II ions into a one‐dimensional (1D) chain. Such 1D chains are linked by the dtb ligands to form a 2D layer. The adjacent 2D layers are extended into a three‐dimensional (3D) supramolecular architecture by hydrogen‐bonding interactions. The electrochemical properties of 1 and 2 were investigated.     

Synthesis of diisocyanides with phenolic groups and their polymerization to helically chiral poly(quinoxaline‐2,3‐diyl)s

The development of synthetic routes which lead to five new diisocyanide monomers with one or two phenolic groups is described. Their polymerization behavior is studied with Pd‐ and Ni‐based initiators, as well as under microwave irradiation. The polymerizability is mainly dominated by steric effects as is concluded from experiments using different protecting groups. Chiroptical properties of these new polymers are studied by CD‐spectroscopy. After deprotection, helically chiral poly(quinoxalin‐2,3‐diyl)s are obtained which display a Brønsted function attached to a stereolabile biaryl axis whose configuration should be influenced by the chiral polymer backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1320–1329     

Rigid diol bearing 6‐6‐6 fused ring system derived from naturally occurring myo‐inositol and its polyaddition with diisocyanates

Naturally occurring myo‐inositol was developed into a highly rigid diol by converting its 3,4‐ and 1,6‐vicinal diols in trans configuration into the corresponding butane‐2,3‐diacetals. The resulting diol bearing 6‐6‐6 fused ring system, in which conformational change is strictly suppressed, was combined with diisocyanates to perform polyadditions. The resulting polyurethanes were analyzed by differential scanning calorimetry, and it was found that their glass transition temperatures were much higher than those of the previously reported myo‐inositol‐derived polyurethanes, which were synthesized from a myo‐inositol‐derived diol bearing 5‐6‐5 fused ring system. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3798–3803     

Synthesis and opto‐electrical properties of dendron‐containing poly(2,3‐diphenyl‐1,4‐phenylenevinylene) derivatives

A new series of poly(2,3‐diphenyl‐1,4‐phenylenevinylene) derivatives containing dendritic side groups were synthesized. Different generations of dendrons were integrated on the pendant phenyl ring to investigate their effect on optical and electrical properties of final polymers. Homopolymers can not be obtained via the Gilch polymerization because of sterically bulky dendrons. By controlling the feed ratio of different monomers during polymerization, dendron‐containing copolymers with high molecular weights were obtained. The UV–vis absorption and photoluminescent spectra of the thin films are pretty close; however, quantum efficiency is significantly enhanced with increasing the generation of dendrons. The electrochemical analysis reveals that hole‐injection is also improved by increasing dendritic generation. Double‐layer light‐emitting devices with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al were fabricated. High generation dendrons bring benefit of improved device performance. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3440–3450, 2007     

Random fluorene copolymers with on‐chain quinoxaline acceptor units

Two series of novel random polyfluorene copolymers containing quinoxaline units were prepared by stressing the coupling according to Yamamoto. The first series contains 2,3‐bis‐(4′‐tert‐butyl‐biphenyl‐4‐yl)benzo[g]quinoxaline and the second series 2,3‐bis‐(4′‐tert‐butyl‐biphenyl‐4‐yl)quinoxaline as energy accepting unit. The copolymers were identified by gel permeation chromatography, infrared spectroscopy, and nuclear magnetic resonance spectroscopy. Thermal properties were analyzed by thermal gravimetric analysis and differential scanning calorimetry revealing amorphous copolymers that are stable up to 430 °C. The morphology was investigated using atomic force microscopy. The optical properties in solutions and thin films were analyzed. Furthermore, the thin film electro‐optical properties were determined in monolayer polymer light‐emitting devices. Single layer devices were built with efficiencies ranging from 0.15 to 2.0 cd/A. For the random copolymers with 5 mol % benzo[g]quinoxazoline in the polyfluorene backbone some threefold efficiency enhancement from 1.1 to 3.0 cd/A was achieved by utilizing an ultra thin interlayer of poly(9,9‐di‐n‐octylfluorene‐2,7‐diyl)‐alt‐[1,4‐phenylene‐(4‐sec‐butylphenylimino)‐1,4‐phenylene] between PEDOT:PSS and the emissive random copolymer layer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4773–4785, 2007     

Facile fabrication of redox‐active and electrochromic poly(amide‐amine) films through electrochemical oxidative coupling of arylamino groups

Two novel electropolymerizable monomers, namely 3,5‐bis(4‐diphenylaminobenzamido)‐N‐[4‐(carbazol‐9‐yl)phenyl]benzamide ( 5 ) and 3,5‐bis(4‐diphenylaminobenzamido)‐N‐[4‐(3,6‐dimethoxycarbazol‐9‐yl)phenyl]benzamide ( 5‐MeO ), were synthesized, and their electrochemical properties were studied by cyclic voltammetry. The electron‐withdrawing amide groups efficiently blocked the radical cations delocalization between the two terminal TPA groups, rendering the electropolymerization of the TPA groups feasible. The polymer electrodeposited from monomer 5 could be further crosslinked through electro‐coupling of the carbazole groups, which showed both electrochromic and fluorescent properties (the emission of blue light (460 nm) in solid state). Both of the electro‐generated polymer films derived from 5 and 5‐MeO showed reversible electrochemical oxidation processes in the range of 0 ? 1.4 V with strong color changes and high contrast ratios in the visible and NIR regions upon electro‐oxidation. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. 2016, 54, 2476–2485     

Electrosyntheses of high‐quality poly(5‐nitroindole) films in boron trifluoride diethyl etherate containing additional diethyl ether

High‐quality poly(5‐nitroindole) (PNP) films were synthesized electrochemically by the direct anodic oxidation of 5‐nitroindole in boron trifluoride diethyl etherate (BFEE) containing additional 10% diethyl ether (EE) (by volume). The addition of EE to BFEE could improve the solubility of the monomer. The oxidation potential onset of 5‐nitroindole in this medium was measured to be only 1.04 V versus a saturated calomel electrode (SCE), which was much lower than that determined in acetonitrile and 0.1 mol L^?1 tetrabutylammonium tetrafluoroborate (1.53 V vs SCE). PNP films obtained from this medium showed good electrochemical behavior and good thermal stability with a conductivity of 10^?2 S cm^?1; this indicated that BFEE containing 10% EE was a suitable medium for the electrosyntheses of PNP films. Structural studies showed that the polymerization of the 5‐nitroindole ring occurred at the 2,3‐position. As‐formed PNP films were thoroughly soluble in the strong polar organic solvent dimethyl sulfoxide and partly soluble in tetrahydrofuran or acetone. Fluorescent spectral studies indicated that PNP was a good green‐light emitter, with excitation and emission wavelengths of 420 and 550 nm, respectively. To the best of our knowledge, this is the first time that nitro‐group‐substituted high‐quality conducting polymer films have been electrodeposited. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3986–3997, 2005