Synthesis, magnetism and electronic structure of YbNi2−xFexAl8 (x=0.91) isolated from Al flux

The combination of ytterbium, nickel, iron in liquid aluminum resulted in the formation of the new intermetallic compound YbNi_2−xFe_xAl₈ (x=0.91) which adopts the CaCo₂Al₈ structure type with a=14.458(3) Å, b=12.455(3) Å, c=3.9818(8) Å and space group Pbam. Its resistivity drops with decreasing temperature, saturating to a constant value at lower temperatures. Above 50 K, the inverse magnetic susceptibility data follows Curie-Weiss Law, with a calculated μ_eff=2.19 μ_B. Although the observed reduced moment in magnetic susceptibility measurement suggests that the Yb ions in this compound are of mixed-valent nature, ab initio electronic structure calculations within density functional theory using LDA+U approximation give an f¹³ configuration in the ground state.     

Synthesis of silicated hydroxyapatite Ca10(PO4)6−x(SiO4)x(OH)2−x

The preparation of silicated hydroxyapatite Ca₁₀(PO₄)_6−x(SiO₄)_x(OH)_2−x (SiHA) with 0?x?2 was investigated using a wet precipitation method followed by a heat treatment. X-ray diffraction and Rietveld refinement, Fourier transformed IR (FTIR) spectroscopy, elemental analyses, transmission electron microscopy and thermal analyses were used to characterize the samples. The raw materials were composed of a partially silicated and carbonated apatite and a secondary minor phase containing the excess silicon. Single phase silicated hydroxyapatites, with 0?x?1, could be synthesized after a thermal treatment of the raw powders above 700 °C. The presence of carbonate groups in the raw apatite played an important role in the incorporation of silicates during heating. From the different results, the mechanisms of formation of SiHA are discussed.     

Rare earth metal-rich indides RE14Rh3−xIn3 (RE=Y, Dy, Ho, Er, Tm, Lu)

The rare earth (RE) metal-rich indides RE₁₄Rh_3-xIn₃ (RE=Y, Dy, Ho, Er, Tm, Lu) can be synthesized from the elements by arc-melting or induction melting in tantalum crucibles. They were investigated by X-ray diffraction on powders and single crystals: Lu₁₄Co₃In₃ type, space group P4₂/nmc, Z=4, a=961.7(1), c=2335.5(5) pm, wR2=0.052, 2047 F² values, 62 variables for Y₁₄Rh₃In₃, a=956.8(1), c=2322.5(5) pm, wR2=0.068, 1730 F² values, 63 variables for Dy₁₄Rh_2.89(1)In₃, a=952.4(1), c=2309.2(5) pm, wR2=0.041, 1706 F² values, 63 variables for Ho₁₄Rh_2.85(1)In₃, a=948.6(1), c=2302.8(5) pm, wR2=0.053, 1977 F² values, 63 variables for Er₁₄Rh_2.86(1)In₃, a=943.8(1), c=2291.5(5) pm, wR2=0.065, 1936 F² values, 63 variables for Tm₁₄Rh_2.89(1)In₃, and a=937.8(1), c=2276.5(5) pm, wR2=0.050, 1637 F² values, 63 variables for Lu₁₄Rh_2.74(1)In₃. Except Yb₁₄Rh₃In₃, the 8g Rh1 sites show small defects. Striking structural motifs are rhodium-centered trigonal prisms formed by the RE atoms with comparatively short Rh-RE distances (271-284 pm in Y₁₄Rh₃In₃). These prisms are condensed via common corners and edges building two-dimensional polyhedral units. Both crystallographically independent indium sites show distorted icosahedral coordination. The icosahedra around In2 are interpenetrating, leading to In2-In2 pairs (309 pm in Y₁₄Rh₃In₃).     

On the distribution of tetrelide atoms (Si, Ge) in Gd5(SixGe1−x)4

A crystallographic study of the Si/Ge site preferences in the Si-rich regime of Gd₅(Si_xGe_1−x)₄ and a crystal chemical analysis of these site preferences for the entire range is presented. The room temperature crystal structure of Gd₅Si₄ as well as four pseudobinary phases, Gd₅(Si_xGe_1−x)₄ for x?0.6, is reported. All structures are orthorhombic (space group Pnma), Gd₅Si₄-type and show decreasing volume as the Si concentration increases. Refinements of the site occupancies for the three crystallographic sites for Si/Ge atoms in the asymmetric unit reveal a nonrandom, but still incompletely ordered arrangement of Si and Ge atoms. The distribution of Si and Ge atoms at each site impacts the fractions of possible homonuclear and heteronuclear Si-Si, Si-Ge and Ge-Ge dimers in the various structures. This distribution correlates with the observed room temperature crystal structures for the entire series of Gd₅(Si_xGe_1−x)₄.     

Electron-poor SrAuxIn4−x (0.5?x?1.2) and SrAuxSn4−x (1.3?x?2.2) phases with the BaAl4-type structure

Solid solutions SrAu_xIn_4−x (0.5?x?1.2) and SrAu_xSn_4−x (1.3?x?2.2) have been prepared at 700 °C and their structures characterized by powder and single-crystal X-ray diffraction. They adopt the tetragonal BaAl₄-type structure (space group I4/mmm, Z=2; SrAu_1.1(1)In_2.9(1), a=4.5841(2) Å, c=12.3725(5) Å; SrAu_1.4(1)Sn_2.6(1), a=4.6447(7) Å, c=11.403(2) Å), with Au atoms preferentially substituting into the apical over basal sites within the anionic network. The phase width inherent in these solid solutions implies that the BaAl₄-type structure can be stabilized over a range of valence electron counts (vec), 13.0-11.6 for SrAu_xIn_4−x and 14.1-11.4 for SrAu_xSn_4−x. They represent new examples of electron-poor BaAl₄-type compounds, which generally have a vec of 14. Band structure calculations confirm that substitution of Au, with its smaller size and fewer number of valence electrons, for In or Sn atoms enables the BaAl₄-type structure to be stabilized in the parent binaries SrIn₄ and SrSn₄, which adopt different structure types.     

Structure and magnetic properties of rare-earth chromium germanides RECrxGe2 (RE=Sm, Gd-Er)

The ternary rare-earth chromium germanides RECr_xGe₂ (RE=Sm, Gd-Er) have been obtained by reactions of the elements, either in the presence of tin or indium flux, or through arc-melting followed by annealing at 800 °C. The homogeneity range is limited to 0.25?x?0.50 for DyCr_xGe₂. Single-crystal and powder X-ray diffraction studies on the RECr_0.3Ge₂ members revealed that they adopt the CeNiSi₂-type structure (space group Cmcm, Z=4, a=4.1939(5)-4.016(2) Å, b=16.291(2)-15.6579(6) Å, c=4.0598(5)-3.9876(2) Å in the progression for RE=Sm to Er), which can be considered to be built up by stuffing transition-metal atoms into the square pyramidal sites of a “REGe₂” host with the ZrSi₂-type structure. (The existence of YbCr_0.3Ge₂ is also implicated.) Only the average structure was determined here, because unusually short Cr-Ge distances imply the development of a superstructure involving distortions of the square Ge net. Magnetic measurements on RECr_0.3Ge₂ (RE=Gd-Er) indicated that antiferromagnetic ordering sets in below T_N (ranging from 3 to 17 K), with additional transitions observed at lower temperatures for the Tb and Dy members.     

Ternary rare-earth titanium antimonides: Phase equilibria in the RE-Ti-Sb (RE=La, Er) systems and crystal structures of RE2Ti7Sb12 (RE=La, Ce, Pr, Nd) and RETi3(SnxSb1-x)4 (RE=Nd, Sm)

Investigations on phase relationships and crystal structures have been conducted on several ternary rare-earth titanium antimonide systems. The isothermal cross-sections of the ternary RE-Ti-Sb systems containing a representative early (RE=La) and late rare-earth element (RE=Er) have been constructed at 800 °C. In the La-Ti-Sb system, the previously known compound La₃TiSb₅ was confirmed and the new compound La₂Ti₇Sb₁₂ (own type, Cmmm, Z=2, a=10.5446(10) Å, b=20.768(2) Å, and c=4.4344(4) Å) was discovered. In the Er-Ti-Sb system, no ternary compounds were found. The structure of La₂Ti₇Sb₁₂ consists of a complex arrangement of TiSb₆ octahedra and disordered fragments of homoatomic Sb assemblies, generating a three-dimensional framework in which La atoms reside. Other early rare-earth elements (RE=Ce, Pr, Nd) can be substituted in this structure type. Attempts to prepare crystals in these systems through use of a tin flux resulted in the discovery of a new Sn-containing pseudoternary phase RETi₃(Sn_xSb_1−x)₄ for RE=Nd, Sm (own type, Fmmm, Z=8; a=5.7806(4) Å, b=10.0846(7) Å, and c=24.2260(16) Å for NdTi₃(Sn_0.1Sb_0.9)₄; a=5.7590(4) Å, b=10.0686(6) Å, and c=24.1167(14) Å for SmTi₃(Sn_0.1Sb_0.9)₄). Its structure consists of double-layer slabs of Ti-centred octahedra stacked alternately with nets of the RE atoms; the Ti atoms are arranged in kagome nets.     

Rare earth-nickel-indides Dy5Ni2In4 and RE4Ni11In20 (RE=Gd, Tb, Dy)

The new rare earth metal (RE)-nickel-indides Dy₅Ni₂In₄ and RE₄Ni₁₁In₂₀ (RE=Gd, Tb, Dy) were synthesized from the elements by arc-melting. Well-shaped single crystals were obtained by special annealing sequences. The four indides were investigated by X-ray diffraction on powders and single crystals: Lu₅Ni₂In₄ type, Pbam, Z=2, a=1784.2(8), b=787.7(3), c=359.9(1) pm, wR₂=0.0458, 891 F² values, 36 variables for Dy₅Ni₂In₄, U₄Ni₁₁Ga₂₀ type, C2/m, a=2254.0(9), b=433.8(3), c=1658.5(8) pm, β=124.59(2)°, wR₂=0.0794, 2154 F² values, 108 variables for Gd₄Ni₁₁In₂₀, a=2249.9(8), b=432.2(1), c=1657.9(5) pm, β=124.59(2)°, wR₂=0.0417, 2147 F² values, 108 variables for Tb₄Ni₁₁In₂₀, and a=2252.2(5), b=430.6(1), c=1659.7(5) pm, β=124.58(2)°, wR₂=0.0550, 2003 F² values, 109 variables for Dy₄Ni_10.80In_20.20. The 2d site in the dysprosium compound shows mixed Ni/In occupancy. Most nickel atoms in both series of compounds exhibit trigonal prismatic coordination by indium and rare earth atoms. Additionally, in the RE₄Ni₁₁In₂₀ compounds one observes one-dimensional nickel clusters (259 pm Ni₁-Ni₆ in Dy₄Ni_10.80In_20.20) that are embedded in an indium matrix. While only one short In₁-In₂ contact at 324 pm is observed in Dy₅Ni₂In₄, the more indium-rich Dy₄Ni_10.80In_20.20 structure exhibits a broader range in In-In interactions (291-364 pm). Together the nickel and indium atoms build up polyanionic networks, a two-dimensional one in Dy₅Ni₂In₄ and a complex three-dimensional network in Dy₄Ni_10.80In_20.20. These features have a clear consequence on the dysprosium coordination, i.e. a variety of short Dy-Dy contacts (338-379 pm) in Dy₅Ni₂In₄, while the dysprosium atoms are well separated (430 pm shortest Dy-Dy distance) within the distorted hexagonal channels of the [Ni_10.80In_20.20] polyanion of Dy₄Ni_10.80In_20.20. The crystal chemistry of both structure types is comparatively discussed.     

Ternary lithium stannides LixT3Sn7−x (T=Rh, Ir)

The ternary stannides Li_xRh₃Sn_7−x (x=0.45, 0.64, 0.80) and Li_xIr₃Sn_7−x (x=0.62 and 0.66) were synthesized from the elements in sealed tantalum tubes in a water-cooled sample chamber of an induction furnace. The samples were characterized by X-ray diffraction on powders and single crystals. The stannides adopt the cubic Ir₃Ge₇-type structure (space group , Z=4). In this structure type the tin atoms occupy the Wyckoff positions 12d and 16f and form two interpenetrating frameworks consisting of cubes and square antiprisms. The rhodium and iridium atoms center the square antiprisms and are arranged in pairs. With increasing lithium substitution the lattice parameter of Ir₃Sn₇ (936.7) decreases via 932.2 pm (x=0.62) to 931.2 pm (x=0.66), while the Ir-Ir distance remains almost the same (290 pm). A similar trend is observed for the rhodium compounds. The lithium atoms substitute Sn on both framework sites. However, the 16f site shows a substantially larger preference for Li occupation. This is in contrast to the isotypic magnesium based compounds.     

High-pressure high-temperature synthesis and crystal structure of the isotypic rare earth (RE)-thioborate-sulfides RE9[BS3]2[BS4]3S3, (RE=Dy-Lu)

Application of high-pressure high-temperature conditions (3.5 GPa at 1673 K for 5 h) to mixtures of the elements (RE:B:S=1:3:6) yielded crystalline samples of the isotypic rare earth-thioborate-sulfides RE₉[BS₃]₂[BS₄]₃S₃, (RE=Dy-Lu), which crystallize in space group P6₃ (Z=2/3) and adopt the Ce₆Al_3.33S₁₄ structure type. The crystal structures were refined from X-ray powder diffraction data by applying the Rietveld method. Dy: a=9.4044(2) Å, c=5.8855(3) Å; Ho: a=9.3703(1) Å, c=5.8826(1) Å; Er: a=9.3279(12) Å, c=5.8793(8) Å; Tm: a=9.2869(3) Å, c=5.8781(3) Å; Yb: a=9.2514(5) Å, c=5.8805(6) Å; Lu: a=9.2162(3) Å, c=5.8911(3) Å. The crystal structure is characterized by the presence of two isolated complex ions [BS₃]^3- and [BS₄]^5- as well as [□(S^2-)₃] units.     

Structural investigation of KxBa1−xGa2−xGe2+xO8 solid solutions using the X-ray Rietveld method

The K_xBa_1−xGa_2−xGe_2+xO₈ (x=0.6−1.0) solid solutions undergo a structural phase transition that has a significant effect on their sintering behavior and their microwave dielectric properties. The crystal structures of both phases within the solid-solution region were determined by the Rietveld method using powder X-ray diffraction data. We found that the low-temperature-stable phase is isostructural with the pseudo-orthorhombic KGaGe₃O₈ (space group P2₁/a), while the high-temperature-stable phase has a typical monoclinic feldspar structure (space group C2/m). Due to the topological differences between the two structures, the T-O bonds within the tetrahedra must be partially recombined to make a new framework, which causes an endothermic effect during the P2₁/a to C2/m phase transition. The correlation between the crystal structures, the microwave dielectric properties and the phase-transition behaviors were discussed in terms of the crystallographic features, the lattice parameters, and the strain-induced anisotropic peak-broadening.     

Oxygen-ion and electron conductivity in Sr2(Fe1−xGax)2O5

High-temperature electrical conductivity measurements, structural data from powder X-ray diffraction and ⁵⁷Fe Mössbauer spectroscopy were combined to study the interrelationship of oxygen ion transport and p- and n-type transport in Sr₂(Fe_1−xGa_x)₂O₅, where x=0, 0.1 and 0.2. Although gallium substitution generally decreases the total ion-electron transport, the transition of the orthorhombic brownmillerite structure to a cubic phase on heating results in the recurrence of the conductivity to the same high level as in the parent ferrite (x=0). The changes of the partial contributions to the total conductivity as a function of x are shown to reflect a complicated interplay of the disordering processes that develop in the oxygen sublattice on heating in response to replacement of iron with gallium.     

Magnetic structures of the α-Li3Fe2(PO4)3−x(AsO4)x (x=1, 1.5, 2, 3) solid solution

Mössbauer spectroscopy and neutron diffraction studies have been carried out for the α-Li₃Fe₂(PO₄)_3−x(AsO₄)_x (x=1, 1.5, 2, 3) solid solution, potential candidate for the cathode material of the lithium secondary batteries. The crystal and magnetic structures of all these phases are based on the structural and magnetic model corresponding to the α-Li₃Fe₂(PO₄)₃ phosphate parent, but with some differences promoted by the arsenate substitution. The PO₄ and AsO₄ groups have a random distribution in the structure. In all compounds the coupling of the magnetic moments takes place in the (001) plane, but the value of the angle between the moments and the x direction decreases from 38.3° (α-Li₃Fe₂(AsO₄)₃) to 4.7° (α-Li₃Fe₂(PO₄)₂(AsO₄)₁). This rotation arises from the change in the tilt angle between the Fe(1)O₆ and Fe(2)O₆ crystallographically and magnetically independent octahedra in the structures, and affects the effectiveness of the magnetic exchange pathways. The ordering temperature T_N decreases with the increase of phosphate amount in the compounds. The existence of a phenomenon of canting and the evolution of the ferrimagnetic behavior in this solid solution is also discussed.     

Synthesis and characterization of Ti1−2xNbxNixO2−x/2 solid solutions

Doped-rutile has been traditionally used in ceramic pigments for its intense optical properties. In this paper, we compare the classical ceramic synthesis of Ti_1−2xNb_xNi_xO_2−x/2 system with the sol-gel methodology, which allows a reduction of the anatase-rutile transformation temperature. The composition was optimised in order to obtain a unique rutile phase with the minimum amount of pollutant Ni(II) and enhanced chromatic coordinates. Incorporation of the doping ions in the rutile structure was corroborated by XRD and Rietveld refinements. The species responsible for the colour mechanism were studied by different techniques. UV-VIS spectroscopy showed the characteristic features of Ni²⁺ ions, whose existence was corroborated by EPR and magnetic measurements. From these results, (Ni,Nb)doped-TiO₂ powder samples can be now shaped as thin films, monoliths, etc. by using sol-gel methodology without modifying their properties. This study introduces new possibilities of coloured TiO₂-based solid solutions in new combined advanced applications (colouring agent and photocatalyst, etc.).     

Structure and thermal conductivity of Na1−xGe3+z

Structural analyses as well as low temperature thermal conductivity is reported for the binary phase Na_1−xGe_3+z. Specimens were characterized by thermal analysis, conventional and synchrotron powder X-ray diffraction, neutron powder diffraction, ²³Na nuclear magnetic resonance spectroscopy, and electrical and thermal transport measurements. With structural characteristics qualitatively analogous to some aluminum-silicate zeolites, the crystal structure of this phase exhibits an unconventional covalently bonded tunnel-like Ge framework, accommodating Na in channels of two different sizes. Observed to be non-stochiometric, Na_1−xGe_3+z concurrently exhibits substantial structural disorder in the large channels and a low lattice thermal conductivity, of interest in the context of identifying novel low thermal conductivity intermetallics for thermoelectric applications.     

Structural, spectroscopic and photoluminescence studies of LiEu(WO4)2−x(MoO4)x as a near-UV convertible phosphor

A series of lithium europium double tungsto-molybdate phosphors LiEu(WO₄)_2−x(MoO₄)_x (x=0, 0.4, 0.8, 1.2, 1.6, 2.0) have been synthesized by solid-state reactions and their crystal structure, optical and luminescent properties were studied. As the molybdate content increases, the intensity of the ⁵D₀→⁷F₂ emission of Eu³⁺ activated at wavelength of 396 nm was found to increase and reach a maximum when the relative ratio of Mo/W is 2:0. These changes were found to be accompanied with the changes in the spectral feature, which can be attributed to the crystal field splitting of the ⁵D₀→⁷F₂ transition. As the molybdate content increases the emission intensity of the 615 nm peak also increases. The intense red-emission of the tungstomolybdate phosphors under near-UV excitation suggests them to be potential candidate for white light generation by using near-UV LEDs. In this study the effect of chemical compositions and crystal structure on the photoluminescent properties of LiEu(WO₄)_2−x(MoO₄)_x is investigated and discussed.     

Synthesis, crystal structure and magnetic properties of the spin ladder compounds La2(Cu1−xZnx)2O5 and La8(Cu1−xZnx)7O19

The influence of Zn-doping on the crystal structure and magnetic properties of the spin ladder compounds La₂Cu₂O₅ (4-leg) and La₈Cu₇O₁₉ (5-leg) have been investigated. The La₂(Cu_1−xZn_x)₂O₅ and La₈(Cu_1−xZn_x)₇O₁₉ solid solutions were obtained as single phases with x=0-0.1 via the solid-state reaction method in the temperature range between 1005-1010 °C and 1015-1030 °C in oxygen and air atmospheres, respectively. The lattice parameters a and c of the monoclinic crystal structures as well as the unit cell volume V increase with increasing x, while b and β decrease for both series. The magnetic susceptibilities χ of both series show a very similar behavior on temperature as well as on Zn-doping, which is supposed to be due to the similar Cu-O coordination in both La₂Cu₂O₅ and La₈Cu₇O₁₉. For low Zn-doping (x?0.04), a spin-chain like behavior is found. This quasi-one-dimensional behavior is strongly suppressed in both series for x?0.04. Here, the maximum (characteristic for spin chains) in χ(T) disappears and χ(T) decreases monotonically with increasing temperature.     

Structure and magnetic properties of RE2CuIn3 (RE=Ce, Pr, Nd, Sm and Gd)

The ternary copper indides RE₂CuIn₃≡RECu_0.5In_1.5 (RE=Ce, Pr, Nd, Sm and Gd) were synthesized from the elements in sealed tantalum tubes in an induction furnace. They crystallize with the CaIn₂-type structure, space group P6₃/mmc, with a statistical occupancy of copper and indium on the tetrahedral substructure. These indides show homogeneity ranges RECu_xIn_2−x. Single crystal structure refinements were performed for five crystals: CeCu_0.66In_1.34 (a=479.90(7) pm, c=768.12(15) pm), PrCu_0.52In_1.48 (a=480.23(7) pm, c=759.23(15) pm), NdCu_0.53In_1.47 (a=477.51(7) pm, c=756.37(15) pm), SmCu_0.46In_1.54 (a=475.31(7) pm, c=744.77(15) pm), and GdCu_0.33In_1.67 (a=474.19(7), c=737.67(15) pm). Temperature-dependent susceptibility measurements show antiferromagnetic ordering at T_N=4.7 K for Pr₂CuIn₃ and Nd₂CuIn₃ and 15 K for Sm₂CuIn₃. Fitting of the susceptibility data of the samarium compound revealed an energy gap ΔE=39.7(7) K between the ground and the first excited levels.     

Thermochemistry of Li1+xMn2−xO4 (0?x?1/3) spinel

Lithium substituted Li_1+xMn_2−xO₄ spinel samples in the entire solid solution range (0?x?1/3) were synthesized by solid-state reaction. The samples with x<0.25 are stoichiometric and those with x?0.25 are oxygen deficient. High-temperature oxide melt solution calorimetry in molten 3Na₂O·4MoO₃ at 974 K was performed to determine their enthalpies of formation from constituent binary oxides at 298 K. The cubic lattice parameter was determined from least-squares fitting of powder XRD data. The variations of the enthalpy of formation from oxides and the lattice parameter with x follow similar trends. The enthalpy of formation from oxides becomes more exothermic with x for stoichiometric compounds (x<0.25) and deviates endothermically from this trend for oxygen-deficient samples (x?0.25). This energetic trend is related to two competing substitution mechanisms of lithium for manganese (oxidation of Mn³⁺ to Mn⁴⁺ versus formation of oxygen vacancies). For stoichiometric spinels, the oxidation of Mn³⁺ to Mn⁴⁺ is dominant, whereas for oxygen-deficient compounds both mechanisms are operative. The endothermic deviation is ascribed to the large endothermic enthalpy of reduction.     

Hydrothermal synthesis, thermal, structural, spectroscopic and magnetic studies of the Mn5−xCox(HPO4)2(PO4)2(H2O)4 (x=1.25, 2, 2.5 and 3) finite solid solution

The Mn_5−xCo_x(HPO₄)₂(PO₄)₂(H₂O)₄ (x=1.25, 2, 2.5, 3) finite solid solution has been synthesized by mild hydrothermal conditions under autogeneous pressure. The phases crystallize in the C2/c space group with Z=4, belonging to the monoclinic system. The unit-cell parameters obtained from single crystal X-ray diffraction are: a=17.525(1), b=9.0535(6), c=9.4517(7) Å, β=96.633(5) ° being R1=0.0436, wR2=0.0454 for Mn75Co25; a=17.444(2), b=9.0093(9), c=9.400(1) Å, β=96.76(1) ° being R1=0.0381, wR2=0.0490 for Mn60Co40; a=17.433(2), b=8.9989(9), c=9.405(1) Å, β=96.662(9) ° being R1=0.0438, wR2=0.0515 for Mn50Co50 and a=17.4257(9), b=8.9869(5), c=9.3935(5) Å, β=96.685(4) ° being R1=0.0296, wR2=0.0460 for Mn40Co60. The structure consists of a three dimensional network formed by octahedral pentameric entities (Mn,Co)₅O₁₆(H₂O)₆ sharing vertices with the (PO₄)³⁻ and (HPO₄)²⁻ tetrahedra. The limit of thermal stability of these compounds is, approximately, 165 °C, near to this mean temperature the phases loose their water content in two successive steps. IR spectra show the characteristic bands of the water molecules and the phosphate and hydrogen-phosphate oxoanions. The diffuse reflectance spectra are consistent with the presence of MO₆ octahedra environments in slightly distorted octahedral geometry, except for the M(3)O₆ octahedron which presents a remarkable distortion and so a higher Dq parameter. The mean value for the Dq and B-Racah parameter for the M(1),(2)O₆ octahedra is 685 and 850 cm⁻¹, respectively. These parameters for the most distorted M(3)O₆ polyhedron are 825 and 880 cm⁻¹, respectively. The four phases exhibit antiferromagnetic couplings as the major magnetic interactions. However, a small spin canting phenomenon is observed at low temperatures for the two phases with major content in the anisotropic-Co(II) cation.