EPR spectroscopic studies in (30 − x) Li2O-xK2O-10CdO-59B2O3-1MnO2 multi-component glass system

EPR studies were carried out in (30 - x) Li₂O-xK₂O-10CdO-59B₂O₃-1MnO₂ multi-component glass system to understand the effect of the variation in the alkali ratios on the EPR parameters. The observed EPR spectra of Mn²⁺ ion exhibits resonances at g = 2.0, 3.3 and 4.3. The resonance at g = 2.0 is due to Mn²⁺ ions in an environment close to the octahedral symmetry, where as the resonances at g = 3.3 & 4.3 are due to the rhombic surroundings of Mn²⁺ ions. Hyperfine splitting constant values at g = 2.0 and number of paramagnetic centers & paramagnetic susceptibility at different observed resonances were evaluated. These parameters show non linear variation with progressive substitution of Li⁺ ion with K⁺ ions may be due to the changes in cation field strengths and local structural variation due to the variation in mixed alkali ion ratios.     

An evaluation of silver ionic transport in the mixed system (1−x)·CuI-x·Ag2MoO4 (0.15?x?0.6)

The origin and nature of correlation between silver ionic conduction and composition of various phases present in the case of the mixed system CuI-Ag₂MoO₄ were probed in terms of possible solid-state reactions. Detailed X-ray diffraction (XRD), differential scanning calorimetry, Fourier transform infrared, electrical transport studies involving ionic transport number data and electrical conductivity measurement were carried out in order to identify the reaction products. The feasible reaction products identified were found to determine the exact composition resulting from the completion of each solid-state reaction and hence the behavior of effective electric conduction.     

Crystal structure and electrical conductivity of lanthanum-calcium chromites-titanates La1−xCaxCr1−yTiyO3−δ (x=0-1, y=0-1)

Five series of perovskite-type compounds in the system La_1−xCa_xCr_1−yTi_yO₃ with the nominal compositions y=0, x=0-0.5; y=0.2, x=0.2-0.8; y=0.5, x=0.5-1.0; y=0.8, x=0.6-1.0 and y=1, x=0.8-1 were synthesized by a ceramic technique in air (final heating 1350 °C). On the basis of the X-ray analysis of the samples with (Ca/Ti)?1, the phase diagram of the CaTiO₃-LaCr^IIIO₃-CaCr^IVO₃ quasi-ternary system was constructed. Extended solid solution with a wide homogeneity range is formed in the quasi-ternary system CaCr^IVO₃-CaTiO₃-LaCr^IIIO₃. The solid solution La_{(1−x′−y)}Ca_(x′+y)Cr^IV_x′Cr^III_{(1−x′−y)}Ti_yO₃ exists by up to 0.6-0.7 mol fractions of CaCr^IVO₃ (x^′<0.6-0.7) at the experimental conditions. The crystal structure of the compounds is orthorhombic in the space group Pbnm at room temperature. The lattice parameters and the average interatomic distances of the samples within the solid solution ranges decrease uniformly with increasing Ca content. Outside the quasi-ternary system, the nominal compositions La_0.1Ca_0.9TiO₃, La_0.2Ca_0.8TiO₃, La_0.4Ca_0.6Cr_0.2Ti_0.8O₃ and La_0.3Ca_0.7Cr_0.2Ti_0.8O₃ in the system La_1−xCa_xCr_1−yTi_yO₃ were found as single phases with an orthorhombic structure. In the temperature range between 850 and 1000 °C, the synthesized single-phase compositions are stable at pO₂=6×10⁻¹⁶-0.21×10⁵ Pa. Oxygen stoichiometry and electrical conductivity of the separate compounds were investigated as functions of temperature and oxygen partial pressure. The chemical stability of these oxides with respect to oxygen release during thermal dissociation decreases with increasing Ca-content. At 900 °C and oxygen partial pressure 1×10⁻¹⁵-0.21×10⁵ Pa, the compounds with x>y (acceptor doped) are p-type semiconductors and those with x<y (donor doped) and x=y are n-type semiconductors. The type and level of electrical conductivity are functions of the concentration ratios of cations occupying the B-sites of the perovskite structures: [Cr³⁺]/[Cr⁴⁺] and [Ti⁴⁺]/[Ti³⁺]. The maximum electrical conductivity at 900 °C and pO₂=10⁻¹⁵ Pa was found for the composition La_0.1Ca_0.9TiO₃ (near 50 S/cm) and in air at 900 °C for La_0.5Ca_0.5CrO₃ (close to 100 S/cm).     

Enthalpy of mixing in 0.8[xB2O3-(1 − x)P2O5]-0.2Na2O glasses at 298 K

0.8[xB₂O₃-(1 − x)P₂O₅]-0.2Na₂O (with 0 ≤ x ≤ 1) glasses have been characterized by solution calorimetry at 298 K in acid solvent. The experimental data showed a strong negative departure of the enthalpy of mixing from the ideality described by the equation (in kJ/mol): ΔH = x(1 − x)(−660.2 + 570x). The results were interpreted on the basis of the structural data. Enthalpies of mixing were consistent with sub-regular solution behaviour.     

Synthesis and characterization of a NaSICON series with general formula Na2.8Zr2−ySi1.8−4yP1.2+4yO12 (0?y?0.45)

In this work, we present the synthesis and the characterization of ionic conducting ceramics of NaSICON-type (Natrium super ionic conductor). The properties of this ceramic make it suitable for use in electrochemical devices. These solid electrolytes can be used as sensors for application in the manufacturing of potentiometric gas sensors, for the detection of pollutant emissions and for environment control. The family of NaSICON that we studied has as a general formula Na_2.8Zr_2−ySi_1.8−4yP_1.2+4yO₁₂ with 0?y?0.45. The various compositions were synthesized by produced using the sol-gel method. The electric properties of these compositions were carried out by impedance spectroscopy. The results highlight the good conductivity of the Na_2.8Zr_1.775Si_0.9P_2.1O₁₂ composition.     

Mixed conductivity and Mössbauer spectra of (La0.5Sr0.5)1−xFe1−yAlyO3−δ (x=0-0.05, y=0-0.30)

Aluminum incorporation in the rhombohedrally distorted perovskite lattice of (La_0.5Sr_0.5)_1−xFe_1−yAl_yO_3−δ (x=0-0.05, y=0-0.30) decreases the unit cell volume and partial ionic and p-type electronic conductivities, while the oxygen nonstoichiometry and thermal expansion at 900-1200 K increase on doping. The creation of A-site cation vacancies has an opposite effect on the transport properties of Al-substituted ceramics. The maximum A-site deficiency tolerated by the (La,Sr)(Fe,Al)O_3−δ structure is however limited, close to 3-4%. The Mössbauer spectroscopy revealed progressive localization of electron holes and a mixed charge-compensation mechanism, which results in higher average oxidation state of iron when Al³⁺ concentration increases. The average thermal expansion coefficients of (La_0.5Sr_0.5)_1−xFe_1−yAl_yO_3−δ are (12.2-13.0)×10⁻⁶ K⁻¹ at 300-900 K and (20.1-30.0)×10⁻⁶ K⁻¹ at 900-1200 K in air. The steady-state oxygen permeability (OP) of dense Al-containing membranes is determined mainly by the bulk ionic conductivity. The ion transference numbers at 973-1223 K in air, calculated from the oxygen permeation and faradaic efficiency (FE) data, vary in the range 1×10⁻⁴-3×10⁻³, increasing with temperature.     

Oxygen-ion and electron conductivity in Sr2(Fe1−xGax)2O5

High-temperature electrical conductivity measurements, structural data from powder X-ray diffraction and ⁵⁷Fe Mössbauer spectroscopy were combined to study the interrelationship of oxygen ion transport and p- and n-type transport in Sr₂(Fe_1−xGa_x)₂O₅, where x=0, 0.1 and 0.2. Although gallium substitution generally decreases the total ion-electron transport, the transition of the orthorhombic brownmillerite structure to a cubic phase on heating results in the recurrence of the conductivity to the same high level as in the parent ferrite (x=0). The changes of the partial contributions to the total conductivity as a function of x are shown to reflect a complicated interplay of the disordering processes that develop in the oxygen sublattice on heating in response to replacement of iron with gallium.     

Syntheses and crystal structures of two new hydrated borates, Zn8[(BO3)3O2(OH)3] and Pb[B5O8(OH)]·1.5H2O

Two new hydrated borates, Zn₈[(BO₃)₃O₂(OH)₃] and Pb[B₅O₈(OH)]·1.5H₂O, have been prepared by hydrothermal reactions at 170 °C. Single-crystal X-ray structural analyses showed that Zn₈[(BO₃)₃O₂(OH)₃] crystallizes in a non-centrosymmetric space group R32 with a=8.006(2) Å, c=17.751(2) Å, Z=3 and Pb[B₅O₈(OH)]·1.5H₂O in a triclinic space group P1¯ with a=6.656(2) Å, b=6.714(2) Å, c=10.701(2) Å, α=99.07(2)°, β=93.67(2)°, γ=118.87(1)°, Z=2. Zn₈[(BO₃)₃O₂(OH)₃] represents a new structure type in which Zn-centered tetrahedra are connected via common vertices leading to helical ribbons _∞¹[Zn₈O₁₅(OH)₃]¹⁷⁻ that pack side by side and are further condensed through sharing oxygen atoms to form a three-dimensional _∞³[Zn₈O₁₁(OH)₃]⁹⁻ framework. The boron atoms are incorporated into the channels in the framework to complete the final structure. Pb[B₅O₈(OH)]·1.5H₂O is a layered compound containing double ring [B₅O₈(OH)]²⁻ building units that share exocyclic oxygen atoms to form a two-dimensional layer. Symmetry-center-related layers are stacked along the c-axis and held together by interlayer Pb²⁺ ions and water molecules via electrostatic and hydrogen bonding interactions. The IR spectra further confirmed the existence of both triangular BO₃ and OH groups in Zn₈[(BO₃)₃O₂(OH)₃], and BO₃, BO₄, OH groups as well as guest water molecules in Pb[B₅O₈(OH)]·1.5H₂O.     

Structural investigation in the TiB2-(Na2O·B2O3·Al2O3) system

Composites in the TiB₂-Na₂O·B₂O₃·Al₂O₃ systems, TiB₂-MBA (MB stands for sodium metaborate and A is Al₂O₃), were prepared by self-propagating high-temperature synthesis (SHS), in simultaneous mode. Selection of these compositions was ruled by the interesting properties of both TiB₂ and double borates of alkali metal and aluminum. The structure of the obtained materials was evaluated by micro-Raman spectroscopy, from room temperature up to 600 °C, and X-ray photoelectron spectroscopy (XPS). Formation of the TiB₂ and TiO_2−xB_x phases along with TiO₂ as rutile were identified as titanium speciation in the grain phase embedded in a sodium aluminum borate matrix. Integration of the Raman spectra of the grain phases revealed a TiB₂ content of 16.99% and 23.32% for the two composite investigated 2TiB₂·2MBA and 3TiB₂·5MBA. A constrained-width model for the spectral deconvolution of the high-frequency Raman band was forwarded to calculate the proportion of tetrahedral boron atoms (7.424%) in the blank borate matrix Na₂B₂O₄·Al₂O₃ in solid phase.     

Bi2/3Ce1/3Rh2O5: A new mixed-valent Rh oxide with hitherto unknown structure

The new compound Bi_2/3Ce_1/3Rh₂O₅ has been discovered. It is currently the only known compound in the Bi-Ce-Rh-O system, and it crystallizes in a previously unknown structure type. The structure was established from single crystal X-ray diffraction data. Interatomic distances indicate the oxidation states as Bi_2/3³⁺Ce_1/3⁴⁺Rh₂^3.33+O₅. The structure indicates no ordering between Rh³⁺ and Rh⁴⁺. The lack of charge ordering is consistent with the metallic properties determined from electrical conductivity, Seebeck coefficient, and magnetic susceptibility measurements.     

Structural Study of Li1+x−yNb1−x−3yTix+4yO3 Solid Solutions

The structures of Li_1+x−yNb_1−x−3yTi_x+4yO₃ solid solutions within the so-called M-phase field in the Li₂O-Nb₂O₅-TiO₂ system were investigated using high-resolution transmission electron, microscope (HRTEM) and single-crystal X-ray diffraction. The results demonstrated that the phase field is not a solid solution but rather a homologous series of commensurate intergrowth structures with LiNbO₃-type (LN) slabs separated by single [Ti₂O₃]²⁺ corundum-type layers. The thickness of the LN slab decreases with increasing Ti-content from ∼55 to 3 atomic layers in the metastable H-Li₂Ti₃O₇ end-member. The LN slabs accommodate a wide range of Ti⁴⁺/Nb⁵⁺ substitution, and for a given homolog the distribution of Ti and Nb is not uniform across the slab. A single-crystal X-ray diffraction study of a structure composed of nine-layer LN slabs revealed preferential segregation of Ti to the slab surfaces which apparently provides partial compensation for the charge on the adjacent [Ti₂O₃]²⁺ corundum layers. The extra cations in phases with x>0 are accommodated through the formation of Li-rich Li₂MO₃-type layers in the middle of the LN slabs. The fraction of layers with extra cations increases with increasing Ti-content in the structure.     

Synthesis and crystal structure of two new cerium rhodium oxides: Ce2/3−xRh2O4 (x∼0.12) with Ce mixed valency and CeRh2O5

The new compounds Ce_2/3−xRh₂O₄ (x∼0.11-0.14) and CeRh₂O₅ have been prepared. Their structures were determined from single crystal X-ray diffraction data. Electrical and magnetic properties were also evaluated. Based on the structural analysis and physical properties, oxidation states for CeRh₂O₅ can be assigned as Ce⁴⁺Rh³⁺₂O₅. A small variation in x was detected for Ce_2/3−xRh₂O₄ indicating a formula ranging from Ce^3.64+_0.55Rh³⁺₂O₄ to Ce^3.81+_0.525Rh³⁺₂O₄.     

A Mössbauer study of oxygen vacancy and cation distribution in 6H-BaTi1−xFexO3−x/2

We have synthesized samples in the system BaTi_1−xFe_xO_3−x/2 with x=0.1−0.6 at temperatures of 1200-1300°C under reducing conditions of oxygen fugacity. After drop quenching, samples were characterized using the electron microprobe, X-ray diffraction and Mössbauer spectroscopy. All samples were hexagonal with a 6H-BaTiO₃ type structure. Mössbauer spectroscopy showed all iron to be present as Fe³⁺, occurring in octahedral and pentahedral sites. Analysis of area ratios indicates that oxygen vacancies are distributed randomly over O1 sites, and that a random distribution of Fe and Ti cations over M1 and M2 sites is consistent with the data. No evidence for ordering of oxygen vacancies was found. Results are consistent with conductivity results, which show generally increasing ionic conductivity with increasing oxygen vacancy concentration.     

Structural and physical properties of Mg3−xZnxSb2 (x=0-1.34)

The Mg_3−xZn_xSb₂ phases with x=0-1.34 were prepared by direct reactions of the elements in tantalum tubes. According to the X-ray single crystal and powder diffraction, the Mg_3−xZn_xSb₂ phases crystallize in the same P3¯m1 space group as the parent Mg₃Sb₂ phase. The Mg_3−xZn_xSb₂ structure is different from the other substituted structures of Mg₃Sb₂, such as (Ca, Sr, Ba) Mg₂Sb₂ or Mg_5.23Sm_0.77Sb₄, in a way that in Mg_3−xZn_xSb₂ the Mg atoms on the tetrahedral sites are replaced, while in the other structures Mg on the octahedral sites is replaced. Thermoelectric performance for the two members of the series, Mg₃Sb₂ and Mg_2.36Zn_0.64Sb₂, was evaluated from low to room temperatures through resistivity, Seebeck coefficient and thermal conductivity measurements. In contrast to Mg₃Sb₂ which is a semiconductor, Mg_2.36Zn_0.64Sb₂ is metallic and exhibits an 18-times larger dimensionless figure-of-merit, ZT, at room temperature. However, thermoelectric performance of Mg_2.36Zn_0.64Sb₂ is still poor and it is mostly due to its large electrical resistivity.     

Synthesis, structure of [H3dien]·(MF6)·H2O (M=Cr, Fe) and Fe Mössbauer study of [H3dien]·(FeF6)·H2O

Single crystals of [H₃dien]·(FeF₆)·H₂O (I) and [H₃dien]·(CrF₆)·H₂O (II) are obtained by solvothermal synthesis under microwave heating. I is orthorhombic (Pna2₁) with a=11.530(2) Å, b=6.6446(8) Å, c=13.787(3) Å, V=1056.3(2) Å³ and Z=4. II is monoclinic (P2₁/c) with a=13.706(1) Å, b=6.7606(6) Å, c=11.3181(9) Å, β=99.38(1)°, V=1034.7(1) Å³ and Z=4. The structure determinations, performed from single crystal X-ray diffraction data, lead to the R₁/wR₂ reliability factors 0.028/0.066 for I and 0.035/0.102 for II. The structures of I and II are built up from isolated FeF₆ or CrF₆ octahedra, water molecules and triprotonated amines. In both structures, each octahedron is connected by hydrogen bonds to six organic cations and two water molecules. The iron-based compound is also characterized by ⁵⁷Fe Mössbauer spectrometry: the hyperfine structure confirms the presence of Fe³⁺ in octahedral coordination and reveals the existence of paramagnetic spin fluctuations.     

Thermodynamic properties of the ternary system {yNH4Cl + (1 − y)MgCl2} (aq) at 298.15 K

The mixture {yNH₄Cl + (1 − y)MgCl₂} (aq) has been studied using the hygrometric method at the temperature 298.15 K. The water activities are measured at total molalities from 0.30 mol kg⁻¹ up to saturation for different ionic strength fractions y of NH₄Cl with y = 0.20, 0.50 and 0.80. The obtained data allow the deduction of osmotic coefficients. Experimental results are compared with the calculations using the models of Zdanovskii–Stokes–Robinson, Kusik and Meissner, Robinson and Stokes, Lietzke and Stoughton, Reilly–Wood and Robinson and Pitzer. Thermodynamic properties have been modeled using the Pitzer ion-interaction model with inclusion of an ionic strength dependence of the third virial coefficient for the binary systems. From these measurements and the obtained binary parameters β⁽⁰⁾, β⁽¹⁾, C⁽⁰⁾ and C⁽¹⁾, the mixing ionic parameters θNH₄Mg${\theta }_{\text{N}{\text{H}}_4\text{Mg}}$ and ψNH₄MgCl${\psi }_{\text{N}{\text{H}}_4\text{MgCl}}$ are determined by the standard Pitzer model. The results show that a good accuracy is obtained with the standard Pitzer model using extended binary parameters. The parameters θNH₄Mg${\theta }_{\text{N}{\text{H}}_4\text{Mg}}$ and ψNH₄MgCl${\psi }_{\text{N}{\text{H}}_4\text{MgCl}}$ were used for evaluation of activity coefficients in the mixture. The excess Gibbs energy is also determined.     

The Crystal Structures, Microstructure and Ionic Conductivity of Ba2In2O5 and Ba(InxZr1−x)O3−x/2

This paper describes the results of electron microscopy, high-temperature powder neutron diffraction, and impedance spectroscopy studies of brownmillerite-structured Ba₂In₂O₅ and perovskite structured Ba(In_xZr_1−x)O_3−x/2. The ambient temperature structure of Ba₂In₂O₅ is found to adopt Icmm symmetry, with disorder of the tetrahedrally coordinated (In³⁺) ions of the type observed previously in Sr₂Fe₂O₅. Ba₂In₂O₅ undergoes a ∼6-fold increase in its ionic conductivity over the narrow temperature range from ∼1140 K to ∼1230 K, in broad agreement with previous studies. This transition corresponds to a change from the brownmillerite structure to a cubic perovskite arrangement with disordered anions. Electron microscopy investigations showed the presence of extended defects in all the crystals analyzed. Ba(In_xZr_1−x)O_3−x/2 samples with x=0.1 to 0.9 adopt the cubic perovskite structure, with the lattice parameter increasing with x.     

Crystal structure, thermal expansion and conductivity of anisotropic La1−xSrxGa1−2xMg2xO3−y (x=0.05, 0.1) single crystals

Crystal structure and anisotropy of the thermal expansion of single crystals of La_1−xSr_xGa_1−2xMg_2xO_3−y (x=0.05 and 0.1) were measured in the temperature range 300-1270 K. High-resolution X-ray powder diffraction data obtained by synchrotron experiments have been used to determine the crystal structure and thermal expansion. The room temperature structure of the crystal with x=0.05 was found to be orthorhombic (Imma, Z=4, a=7.79423(3) Å, b=5.49896(2) Å, c=5.53806(2) Å), whereas the symmetry of the x=0.1 crystal is monoclinic (I2/a, Z=4, a=7.82129(5) Å, b=5.54361(3) Å, c=5.51654(4) Å, β=90.040(1)°). The conductivity in two orthogonal directions of the crystals has been studied. Both, the conductivity and the structural data indicate three phase transitions in La_0.95Sr_0.05Ga_0.9Mg_0.1O_2.92 at 520-570 K (Imma-I2/a), 770 K (I2/a-R3c) and at 870 K (R3c-R-3c), respectively. Two transitions at 770 K (I2/a-R3c) and in the range 870-970 K (R3c-R-3c) occur in La_0.9Sr_0.1Ga_0.8Mg_0.2O_2.85.     

Crystal Structure of Pseudorhombohedral InFe1−xTixO3+x/2 (x=2/3)

The structure of pseudorhombohedral-type InFe_1−xTi_xO_3−x/2 (x=2/3) was refined by Rietveld profile fitting. The crystal is a commensurate member of a series in a solution range on InFeO₃-In₂Ti₂O₇ including incommensurate structures. The structure with the unit cell of a=5.9188(1), b=10.1112(2), and c=6.3896(1) Å, β=108.018(2)°, and a space group P2₁/a is the alternate stacking of an edge-shared InO₆ octahedral layer and an Fe/Ti-O plane along c^*. Metal sites on the Fe/Ti-O plane are surrounded by four oxygen atoms on the Fe/Ti-O plane and two axial ones. Electric conductivities of the order 10⁻⁴ S/cm were observed for the samples at 1000 K, while the oxide ion transport number is almost zero as no electromotive force was detected by an oxygen concentration cell.     

Na3Fe(C2O4)3·5H2O的热解过程和FAB-MS断裂规律

以红外光谱法为主要手段，原位“跟踪”测定铁（Ⅲ）与乙二酸形成的配合物Ｎａ３Ｆｅ（Ｃ２Ｏ４）３．５Ｈ２Ｏ的热解过程，分析了气、固相热解产物。并以色谱分析、差热－热重分析和Ｘ－射线粉末衍射法定性、定量地验证其结果。测定了该配合物快原子轰击质谱，提出了断裂规律。铁的二元羧酸配合物的质谱尚属首见。