Optimization of parameters for semiempirical methods. III Extension of PM3 to Be,Mg, Zn,Ga, Ge,As, Se,Cd, In,Sn, Sb,Te, Hg,Tl, Pb,and Bi

Using a recently developed procedure for optimizing parameters for semiempirical methods,¹ PM3 has been extended to a total of 28 elements. Average ΔH_f errors for the newly parameterized elements are Be: 8.6, Mg: 8.4, Zn: 5.8, Ga: 14.9, Ge: 11.4, As: 8.5, Se: 11.1, Cd: 2.6, In: 11.3, Sn: 9.0, Sb: 13.7, Te: 11.3, Hg: 6.8, Tl: 6.5, Pb: 7.4, and Bi: 10.9 kcal/mol. For some elements the paucity of data has resulted in a method, which, while highly accurate, is likely to be only poorly predictive.     

Metal-Directed Formation of Tetra-, Hexa-, Octa-, and Nonanuclear Complexes of Magnesium,Calcium, Manganese,Copper, and Cadmium

Efficacious metal control of self-assembly of dialkylketipinate dianions leads to completely different supramolecular assemblies. The structures of grid 1 , double-decker 2 , triple-decker 3 , and metalla-spherand 4 were characterized by X-ray crystallographic analyses or by NMR spectroscopy.     

Certification of the mass fractions of Ca,Cu, Cl,I, Fe,K, Mg,P, Pb,N, Na and Zn in skim milk powder

Analyses of milk and milk products are routinely performed by a number of dairy laboratories to control the quality of these products with regard to e.g. nutritional components and potential exposure to toxic elements. In order to improve and control the quality of such analyses the Community Bureau of Reference (BCR) has organized series of certification campaigns to produce reference material of milk certified for a variety of elements and compounds. The increasing demand is such that the stock of some of these materials is now exhausted. Consequently, the BCR decided to produce a new batch of CRM of skim milk powder certified for its contents of Ca, Cu, Cl, I, Fe, K, Mg, P, Pb, N, Na and Zn (CRM 063R). This material was carefully prepared (spray-drying) and its homogeneity and long term stability was verified. This paper presents the certification work performed.     

Thin-layer chromatographic separation of aldrin,dieldrin, γ-hexachlorocyclohexane,malathion, ethyl-parathion,pentachlorophenol, and of chlordane,dieldrin, γ-hexachlorocyclohexane,malathion, ethyl-parathion,and pentachlorophenol from each other

A thin-layer chromatographic method is reported for the separation of aldrin (or chlordane), dieldrin, γ-hexachlorocyclohexane, malathion, ethyl-parathion, and pentachlorophenol from each other. The procedure, however, does not separate aldrin and chlordane from each other although it does separate either pesticide from the other components. The method employs alumina plates with n-hexane:xylene:benzene:toluene:cyclohexane:methyl cyclohexane (50:50:50:50:50:50:) as developing solvent.     

Prediction of the enthalpy of vapourisation for anhydrides,formates, acetates,propionates, butyrates,esters, and ethers

Four analytical correlations based on the use of the corresponding states principle were used to calculate the enthalpy of vapourisation of fluids. Three of these correlations require as inputs the critical temperature and the acentric factor. The fourth requires a molecular Lennard–Jones parameter and the acentric factor. Results for 184 polar and non-polar fluids grouped into 9 families are compared with the values accepted by the Design Institute for Physical Property (DIPPR) project. Recommendations are given for the use of each model and for the choice of the adequate model for each family of fluids.     

Stereochemistry of the oxidation of 1, 2, 3, 5, 6, 7, 8, 8a-octahydro-1-naphthoic acids

Summary It was shown that the oxidation of syn- and anti-1,2,3,5,6,7,8,8a-octahydro-1-naphthoic acids with peroxyacetic acid and with osmium tetraoxide proceed stereospecifically from the side opposite to that of the carboxy group. On the other hand, the oxidation of syn-cis-1,2,3,5,6,7,8,8a-octahydro-1, 2-naphthalenedicarboxylic acid goes in both of the possible sterically different directions with formation of isomeric- and-epoxides.     

Certification of the contents of As, B, Cd, Cr, Co, Cu, Mn, Hg, Ni, Ti, V and Zn in a natural Moroccan phosphate rock

Summary The preparation and homogeneity tests of a natural Moroccan phosphate rock are described. The experimental procedures leading to the certification of the contents of As, B, Cd, Cr, Co, Cu, Hg, Mn, Ni, Ti, V and Zn are presented. The Pb-content is given as a recommended value. Indicative values are proposed for Ag, Mo, Sb, Se, Th and U. The certification has been carried out in participation with 11 laboratories from different European countries.

---

Zertifizierung der Gehalte an As, B, Cd, Cr, Co, Cu, Mn, Hg, Ni, Ti, V und Zn in einem natürlichen Marokkanischen Phosphatgestein

Zusammenfassung Die Aufbereitung und die Homogenitätskontrollen eines natürlichen Marokkanischen Phosphatgesteins werden beschrieben. Die experimentellen Arbeiten, die zur Zertifizierung der genannten Gehalte geführt haben, werden angegeben. Für Blei wird ein empfohlener Wert gegeben. Indikative Werte werden für Ag, Mo, Sb, Se, Th und U vorgeschlagen. Die Zertifizierung wurde in Zusammenarbeit mit 11 Laboratorien aus verschiedenen europäischen Ländern durchgeführt.

     

The certification of the contents of Cd, Co, Cu, Fe, Hg, Ni, Pb, Zn, Sb, Se, Tl and Cr in a city waste incineration ash

Summary The analysis of ashes being of increasing importance, a reference material was prepared from fly ash of a city waste incinerator. The procedures of preparation, homogeneity and stability testing are described as well as the way of certification of elements of major importance: Cd, Co, Cr, Cu, Fe, Hg, Ni, Pb, Zn, Sb, Se and Tl.

---

Zertifizierung der Gehalte an Cd, Co, Cu, Fe, Hg, Ni, Pb, Zn, Sb, Se, Tl und Cr in einer Stadtmüll-Verbrennungsasche

Zusammenfassung Da die Analyse von Aschen zunehmend an Bedeutung gewinnt, wurde von der Flugasche einer Stadtmüll-Verbrennungsanlage ein Referenzmaterial hergestellt. Die Methoden der Herstellung sowie der Homogenitätsund Stabilitätsprüfung werden beschrieben und die Art der Zertifizierung der Elemente von hauptsächlicher Bedeutung aufgezeigt (Cd, Co, Cr, Cu, Fe, Hg, Ni, Pb, Zn, Sb, Se, Tl).

     

电感耦合等离子体质谱法(ICP-MS)测定稀土矿中钇、镧、铈、镨、钕、钐、铕、钆、铽、镝、钬、铒、铥、镱、镥和钪量

通过用四酸与微波消解法溶解样品对比,建立了用硝酸、盐酸、氢氟酸、高氯酸分解样品,采用电感耦合等离子体质谱法(ICP-MS)测定稀土矿中16种元素含量。方法采用_¹⁰³Rh作为内标消除干扰,确定了最优测定条件,16种稀土元素检出限为0.0029-0.0099ng/mL,测定范围为0.0005-0.020%。精密度试验、加标回收试验及标准物质检测,结果验证了方法的可行性及准确性。该方法简单易操作,结果可靠,能满足实验分析要求。     

Transition-metal-free O-, S-, and N-arylation of alcohols, thiols, amides, amines, and related heterocycles

A new protocol for the Ullmann-type arylation process of different aromatic heterocycles without any transition-metal catalyst, implying the use of a combination of an excess of potassium hydroxide and dimethyl sulfoxide, is described. The reaction can be performed between a broad range of starting nucleophiles including phenol, alcohols, amines, nitrogen-containing five-membered systems such as pyrazoles, imidazoles, and indoles, and amides with haloarenes, iodide and bromide derivatives giving the best results, the possible pathway involving the in situ generation of the corresponding benzyne intermediate. When the reaction was performed with 2-iodoaniline and either carboxamides or isothiocyanato derivatives, the corresponding benzoazole derivatives were obtained.     

Enthalpies of dilution of aqueous solutions of formamide,acetamide, propionamide,andN,N-dimethylformamide

The enthalpies of dilution of aqueous solutions of formamide, acetamide, propionamide,N,N-dimethylformamide, and sucrose have been measured from about 0.15 to 2.0 moles-kg ^–1 at 25.0°C. The results of the enthalpy measurements were used to calculate the pairwise enthalpies of interaction for each compound with itself. The equation of Savage and Wood together with their interaction parameters are used to predict the experimental results. All of the predictions are within the standard deviation of the original correlation of Savage and Wood (±220 J-kg-mole ^–2 ). Detailed examination of the results shows that specific effects are present but they are less than 220 J-kg-mole ^–2 . Results on urea and substituted ureas are used to determine interaction coefficients for a urea group with itself and with another CH ₂ group. The result,H _U,U =–280 andH _{U,CH 2} =29 J-kg-mole ^–2 , is an improvement on the previous arbitrary assignment of parameters for urea interactions.     

Conjugate addition reactions of alpha-aminoalkylcuprates with alpha, beta-alkenyl-, alpha,beta-alkynyl-, alpha,beta-beta,gamma-allenyl-, and alpha,beta-gamma,delta-dienyl carboxylic acid derivatives, nitriles, and sulfoxides

alpha-Aminoalkylcuprates prepared from alpha-lithio carbamates and CuCN.2LiCl participate in 1,4-addition reactions with alpha, beta-unsaturated esters, thiol esters, imides, and nitriles in poor to excellent yields depending upon the electron-withdrawing substituent and the substitution pattern of the unsaturated substrate. These reagents also undergo conjugate addition reactions with alpha,beta-alkynyl esters, sulfoxides, and nitriles and with alpha,beta-beta,gamma-unsaturated allenyl esters. Excellent stereocontrol is achieved in the conjugate additions of alpha-aminoalkylcuprates to the allenyl esters, while poor stereoselectivity results in the conjugate additions to the alkynyl derivatives. Deprotection and cyclization of the alkynyl adducts affords pyrrolin-2-ones, while similar treatment of the allenyl adducts affords 4-alkylidine- pyrrolidin-2-ones and pyrrolizidinones.     

Syntheses, structure, some band gaps, and electronic structures of CsLnZnTe3 (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Y)

Eleven new quaternary rare-earth tellurides, CsLnZnTe3 (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, and Y), were prepared from solid-state reactions at 1123 K. These isostructural materials crystallize in the layered KZrCuS3 structure type in the orthorhombic space group Cmcm. The structure is composed of LnTe6 octahedra and ZnTe4 tetrahedra that share edges to form [LnZnTe3] layers. These layers stack perpendicular to [010] and are separated by layers of face- and edge-sharing CsTe8 bicapped trigonal prisms. There are no Te-Te bonds in the structure of these CsLnZnTe3 compounds so the formal oxidation states of Cs/Ln/Zn/Te are 1+/3+/2+/2-. Optical band gaps of 2.13 eV for CsGdZnTe3 and 2.12 eV for CsTbZnTe3 were deduced from single-crystal optical absorption measurements. A first-principles calculation of the density of states and the frequency-dependent optical properties was performed on CsGdZnTe3. The calculated band gap of 2.1 eV is in good agreement with the experimental value. A quadratic fit for the lanthanide contraction of the Ln-Te distance is superior to a linear one if the closed-shell atom is included.     

Determination of microtraces of Bi, Co, Cu, Fe, Mn, In, Ni, Pb, Sb and Zn in phosphoric acid and ammonium phosphate

Summary Methods for the determination of Bi, Co, Cu, Fe, Mn, In, Ni, Pb, Sb and Zn in phosphoric acid by ETA-AAS using the platform technique were developed. The detection limits are in the range of 1 to 30 ppb for conc. H₃PO₄. Relative standard deviations of 5–10% at 10 times the detection limits were achieved. The results obtained by five different atomic spectroscopic methods are in good agreement (direct Zeeman-ETA-AAS, D₂-ETA-AAS and FAAS; OES and FAAS after trace extraction).     

Interaction of gallium, indium, thallium, germanium, tin, and lead with boron

Summary Investigations of the interaction of boron with gallium, indium, thallium, germanium, tin, and lead with boron showed that these elements do not form chemical compounds or solid solutions with boron.The absence of any interaction between these elements and boron is explained in the light of a discussion of the electronic structure and energy characteristics of the valence electrons of metals of the IIIB and IVB subgroups of the periodic system.Translated from Zhurnal Strukturnoi Khimii, Vol. 1, No. 4, pp. 458–463, November–December, 1960     

Synthesis and characterization of metal-centered, six-membered, mixed-valent, heterometallic wheels of iron, manganese, and indium

Heptanuclear metal-centered, six-membered, mixed-valent, heterometallic wheels 1-3 of iron, manganese, and indium were prepared in a one-pot reaction from N-benzyldiethanolamine (H2L(1)), cesium carbonate, [PPh4]2[MnCl4], and FeCl3 or InCl3. All three complexes were characterized by the combination of elemental analysis, FAB mass spectroscopy, X-ray diffraction and cyclic voltammetry and in the case of 1 additionally by M?ssbauer spectroscopy. In 1, four Mn(II) ions in the periphery are arranged in pairs alternating with one Fe(III) ion each, with an Fe(III) ion located in the center. In 2, three Mn(II) ions alternate with three In(III) ions, whereas in 3, four In(III) ions are arranged in pairs and alternate with one Mn(II) ion each. In 2 and 3 an Mn(II) ion is encapsulated in the center.     

猪胰脏中铁钙镁铜铅锌镉锰钴镍的测定

采用硝酸－过氧化氢在自动回流消化仪中消化猪胰脏,火焰原子吸收光度法测定铁、钙、镁、铜、锌、铅、镉、锰、钴、镍的含量。,方法简便,快速,结果令人满意,并对猪胰脏食用价值进行了评价。     

Synthesis of colloidal dispersions of NiAl, ZnAl, NiCr, ZnCr, NiFe, and MgFe hydrotalcite-like nanoparticles

Nanometric silver dispersed water based nanofluids have been prepared by a single-step chemical process. The crystallite/particle size, morphology and purity of nanoparticles were characterized using standard microscopic, diffraction and spectroscopic techniques. The thermal conductivity enhancement (with respect to the base fluid) has been determined as a function of concentration and size of silver particles using transient hot-wire technique. The accurate fitting of the experimental data of thermal conductivity enhancement with a theoretical model developed by Patel et al. predicts that high specific surface area of the particles, layering at the liquid-solid interface and Brownian motion may be responsible for enhancement.     

Theoretical Study of Molecular Structure,Reactivity, Lipophilicity,and Solubility of N-Hydroxyurea,N-Hydroxythiourea,and N-Hydroxysilaurea

Ab initio molecular orbital methods at the CBS-QB3 level of theory have been used to study the structure and gas-phase stability of various tautomers and rotamers of N-hydroxyurea, N-hydroxythiourea, and N-hydroxysilaurea, their anions and protonated forms. The geometries of N-hydroxyurea, N-hydroxythiourea, and N-hydroxysilaurea, their anions and cations were optimized at the Becke3LYP/CBSB7 level of theory. For all compounds studied, the amidic form is computed to be substantially more stable than the iminolic tautomer. N-Hydroxyurea and its thio and sila derivatives are computed to behave as Nacids in the gas phase. These compounds are in gas-phase weak acids with a calculated acidity of about 1425 to 1355 kJ-mol^–1. Basicities increase in the order: N-hydroxyurea < N-hydroxythiourea < N-hydroxysilaurea. The most stable protonated structures are represented by several isomers with almost equal stability. Thus, in the N-hydroxyurea, N-hydroxythiourea, and N-hydroxysilaurea, both protonation at the double bonded (C=O, C=S and Si=O) oxygen and sulfur atoms, as well as the protonation at the N(H)OH nitrogen basic center is equally probable. The experimental pK _a value (10.6) of N-hydroxyurea and the computed value (9.7) for its monohydrated complex with the specifically hydrogen-bonded water molecule to the ionizable OH group are in a good agreement. The experimental partition coefficient of N-hydroxyurea is best reproduced by the Alog P_s method. The formation of nitroxide radical in the reaction of N-hydroxyurea and its sulfur and silicon substituted derivatives with the phenol radical is an exothermic process. Thus, the \bondN(H)OH moiety of these compounds may quench the structurally related tyrosyl radicals in the active site of ribonucleotide reductase.